This Government Contract opportunity from Department Of Homeland Security was posted on May 7, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

Supply of ASME-Compliant Electric Water Heater (OEM or Authorized Distributor)

Closed

Federal

Submission Closed05/14/2026, 12:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 333415

New

DIBBS

COVER, LUBRICATING OIL

Solicitation # SPE7LX-26-U-9830

This contract, identified as solicitation SPE7LX-26-U-9830, is a total small business set-aside issued by the Department of Defense Strategic Acquisition Program Directorate for the procurement of lubricating oil cool valve covers. The item is designated as a critical application item used in Electric Power Plant III and is associated with NSN 2930123050422. Compatible part numbers include Deutz AG D2689 P/N 02418057EC0148-15, Volvo Construction Equipment GMBH D0704 P/N 4079280, and Liebherr-Werk Ehingen GMBH C2254 P/N 571269777. The requirement is for an estimated quantity of four units with a delivery timeframe of 81 days after the order is placed. Delivery is set as FOB Origin, with inspection and acceptance occurring at the destination. Packaging must comply with ASTM D3951, MIL-STD-129, and DLA packaging requirements for procurement. This solicitation may result in a one-year indefinite-delivery contract with a maximum value of 350,000 dollars. All technical and quality requirements are governed by the DLA Master List, and the contract mandates the removal of government identification from any non-accepted supplies.

STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

DEADLINE

Temperature-Controlled Storage System for CryCam UV

Brookhaven National Labor -Doe Contractor

POSTED

DEADLINE

Commercial Walk-In Freezer Unit Supplier

POSTED

DEADLINE

Walk-in Freezer Equipment Supplier

POSTED

DEADLINE

49 FSS Dining Facility Commercial Freezer

Solicitation # F2E3RM6153A001

The 49th Force Support Squadron at Holloman Air Force Base, New Mexico, is soliciting the purchase and installation of a commercial walk-in freezer for the Shifting Sands Dining Facility. The required unit must have interior dimensions of 10 by 16 by 8 feet 6 inches, a holding temperature of -10 degrees Fahrenheit, and a 26GA G90 galvanized steel finish. Key technical specifications include a three-phase electrical system, remote preassembled refrigeration with a condensing unit located at least 60 feet from the freezer, and aluminum diamond treadplate on the floor, lower walls, and door interior. The unit must also include an integrated temperature monitoring device and an exterior door ramp. The contractor is responsible for the full scope of work, including site preparation through the construction of a concrete slab foundation, on-site assembly, refrigeration piping, and final commissioning. While base Civil Engineering will handle the final electrical hookup, the vendor must provide all unloading support as no forklifts or cranes are available at the delivery site. This is a total small business set-aside under NAICS code 333415. Interested vendors must provide separate costs for freight, shipping, delivery, and setup. Delivery is requested as soon as possible during normal business hours, and personnel must be eligible for base access with visitor requests submitted 24 hours in advance.

POSTED

DEADLINE

Prop Air Cooled Condensing Unit P: 208/230V - 1Ph 3 EA - 60Hz Brand Name Liebert Model PFH014CPLN or Equal

Solicitation # 1232SA26Q0934

Solicitation 1232SA26Q0934 is a combined synopsis and request for quotation issued by the USDA Agricultural Research Service for the procurement, removal, and installation of three Prop Air Cooled Condensing Units for the Sugarcane Research Unit in Schriever, Louisiana. The requirement specifies Liebert Model PFH014CPLN units or an approved equal that meets the same salient physical and functional characteristics, including compatibility with DataMate systems, 208/230V 1Ph 60Hz power specifications, and the ability to operate in temperatures as low as -30°F. The scope of work includes the removal and disposal of existing units and the installation of new units field-charged with R-407C refrigerant. This is an unrestricted acquisition under NAICS code 333415, and award will be made to the lowest price technically acceptable offeror. Technical acceptability is based on the ability to provide the specified equipment, a Certificate of Conformance per FAR 52.246-15, and documented OEM traceability. All items must be delivered FOB destination within 60 days of the order receipt. Offerors must hold their pricing firm for 90 calendar days. The contract incorporates standard federal clauses including Buy American preferences, Service Contract Act wage determinations for Louisiana, and strict compliance with federal anti-discrimination and ethics regulations. Invoices must be submitted electronically through the Invoice Processing Platform.

POSTED

DEADLINE

Basic Expeditionary Airfield Resources (BEAR) Environmental Control Unit (ECU)

Solicitation # FA8534_BEARECU_Follow-up_RFI

The Department of Defense, specifically through the AFLCMC ROKC, has issued a special notice for an additional Request for Information regarding the Basic Expeditionary Airfield Resources Environmental Control Unit effort. This follow-up RFI is intended to gather further industry intelligence concerning capabilities for the BEAR NGECU project due to recent revisions in the requirements. Interested parties are encouraged to review the attached documentation to understand the updated scope of the effort. Responses to this request must be submitted to the identified points of contact no later than the close of business on September 18, 2026. The procurement falls under NAICS code 333415 and is managed by the office located at Robins AFB, Georgia. This notice serves as a market research tool to refine the government's understanding of industry capabilities before proceeding with future acquisition actions.

POSTED

DEADLINE

Solicitation # 12639526Q0251

POSTED

DEADLINE

Solicitation # 1240LP26Q0184

Solicitation 1240LP26Q0184 is a request for quotations issued by the Department of Agriculture, specifically the Csa Intermountain 4 Usda-Fs, for the procurement of three 4-ton water chillers. These units are intended for use in three independent recirculating aquaculture systems at the USDA-ARS National Cold Water Marine Aquaculture Center located in Franklin, Maine. The acquisition is an unrestricted requirement under NAICS code 333415, meaning it is not set aside for small business concerns and is open to all responsible sources. The required chillers must meet specific technical characteristics, including 460V 3-phase power, a PVC shell with a titanium coil, digital temperature control, and phase monitor protection. The units must be pre-charged with refrigerant and utilize a split chiller configuration. The contract follows FAR Part 12 for commercial items and requires Section 508 compliance, with delivery terms specified as FOB destination. Quotations must be submitted by September 15, 2026.

Csa Intermountain 4 Usda-Fs

POSTED

DEADLINE

41--COOLER,AIR,EVAPORAT

Solicitation # SPE8E8-26-T-5573

Solicitation SPE8E8-26-T-5573 is a fixed-price procurement issued by DLA Troop Support for 125 units of air evaporator coolers under NSN 4120014704714. This opportunity is a total small business set-aside under NAICS 333415, with quotes required to be submitted electronically via DIBBS by September 21, 2026. The procurement specifies an approved source with part number DB-11828 and CAGE code 06FL5. Delivery is required within 179 days to the DLA Distribution New Cumberland facility, with an original required delivery date of April 15, 2027. The contract mandates strict quality and technical compliance, including ISO 9001:2015 certification and adherence to Qualified Products List requirements maintained by the Performance Review Institute. A critical requirement is the First Article Testing of one unit, with the test report due within 60 days of the contract award. Packaging must comply with ASTM D3951 and RP001, while marking must follow MIL-STD-129 and MIL-STD-130N. Additionally, the contractor must provide a Certificate of Conformance and meet CMMC Level 2 Self-Assessment standards. Inspection and acceptance will occur at the point of origin, and all invoicing must be processed through the Wide Area WorkFlow system.

DDSP NEW CUMBERLAND FACILITY

POSTED

DEADLINE

Manufacturer of NSN 4520002731276 (Critical Application Item)

DDSP NEW CUMBERLAND FACILITY

POSTED

DEADLINE

Supply of Dial Indicating Pressure Gauges (NSN 6685-01-550-2930)

ASC SUPPLIER OPER OEM DIVISION

POSTED

2 days ago

DEADLINE

in 6 days

AI Contract Overview

The contract requires the procurement and delivery of a single Hubbell Marine Electric Water Heater, Model MSH320-0-30SLT4, specifically configured for immediate installation aboard USCGC 270’ Campbell. The unit must be factory-assembled, cement-lined, and ASME Section IV stamped for 125 psig pressure, with a 320-gallon capacity and a 30 kW electric heating coil. It must be fully insulated, jacketed, pre-wired, and thoroughly tested to ensure operational readiness upon arrival, eliminating the need for additional on-site assembly or commissioning. All components and build standards must meet exacting marine and safety specifications for Coast Guard vessel deployment. The solicitation is structured as a small business set-aside under SBA guidelines, with NAICS code 333415 indicating the classification for heating equipment manufacturing. The contract opportunity was posted on May 7, 2026, and responses are due by May 14, 2026, at 12:00 PM. Performance is required at Curtis Bay, and the procuring entity is the SFLC Procurement Branch 3 under the Department of Homeland Security. The contract is issued as a subcontract, indicating it will be executed under a prime agreement already in place. Only OEMs or authorized distributors may respond, ensuring genuine factory-specification compliance with no substitutions or aftermarket modifications permitted.

General Info

Procure and deliver ASME-certified Hubbell Marine Electric Water Heater for USCGC Campbell by May 2026.

Agency

Department Of Homeland Security → Sflc Procurement Branch 3(00040)View Agency

NAICS

333415 - Air-Conditioning and Warm Air Heating Equipment and Commercial and Industrial Refrigeration Equipment ManufacturingView NAICS

Place of Performance

Curtis Bay, MD, USA

Set-Aside

SBA

Documents

This scope was carved out of 70Z04026Q60311.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

Hubbell Marine Electric Water Heater - OEM "Brand Name"

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PhaseClosed

PostedMay 7

subcontract

Response DeadlineMay 14

Deadline has passed

Submission Closed

05/14/2026, 12:00:00 PM UTC

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Homeland Security → Sflc Procurement Branch 3(00040)

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Homeland Security → Sflc Procurement Branch 3(00040)

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Procure and deliver a single Hubbell Marine Electric Water Heater (Model MSH320-0-30SLT4), factory-assembled, cement-lined, ASME-stamped (Section IV, 125 psig), 320-gallon capacity, 30 kW electric coil, fully insulated, jacketed, wired, and tested for immediate installation aboard USCGC 270’ Campbell.