Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, September 30 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Supply of Vehicular Compartment Heaters for M9 ACE

Active

Federal

Response Deadline09/28/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract with the Department of Defense, specifically the LSO Combat Vehicles and Armament agency, involves the procurement of 15 vehicular compartment heaters for the M9 ACE vehicle. The contractor is responsible for sourcing and delivering HDT Expeditionary Systems Inc units, part number 50115, which include all required mounting hardware and comprehensive installation instructions. The agreement mandates strict adherence to government packaging and palletization standards to ensure the safe delivery of the 15 completed units. Classified under NAICS code 336211, the contract was posted on September 16, 2026, with a response deadline of September 28, 2026.

General Info

DoD procurement of 15 HDT vehicular compartment heaters for M9 ACE vehicles.

Agency

Department Of Defense → LSO COMBAT VEHICLES AND ARMAMENTView Agency

NAICS

336211 - Motor Vehicle Body ManufacturingView NAICS

Place of Performance

USA

Set-Aside

NONE

Documents

This scope was carved out of SPE7L4-26-T-6977.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

HEATER, VEHICULAR, COMPA

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedSep 16

subcontract

Response DeadlineSep 28

Submission deadline

Response Deadline

09/28/2026, 05:00:00 PM UTCin 12 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → LSO COMBAT VEHICLES AND ARMAMENT

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → LSO COMBAT VEHICLES AND ARMAMENT

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supplies vehicular compartment heaters for prime contractors delivering DLA supply contracts. Sources and delivers 15 units of HDT Expeditionary Systems Inc 92878 P/N 50115 (NSN 2540014532490) for the M9 ACE vehicle, including all necessary mounting hardware and detailed installation instructions. Adheres to government packaging and palletization standards. Delivers 15 completed heater units with hardware and instructions.

Similar Contracts

Same NAICS industry code

2310--Transit Bus

Solicitation # 36C24126Q0706

241-NETWORK Contract Office 01 (36C241)

POSTED

about 14 hours ago

DEADLINE

Solicitation # SPE7L1-26-T-12H5

Solicitation SPE7L1-26-T-12H5 is issued by the DLA Land and Maritime Land Supply Chain for the procurement of one carbon steel wheel support, identified by NSN 2510-01-211-0980. The item must be manufactured in accordance with Basic Drawing NR 19207 11625341 Revision A and Reference Drawing NR 19207 11625341 Revision 06. The required delivery date is August 25, 2026, with a delivery window of five days after the order is placed. Shipping is designated as FOB Origin, with the final destination being Warehouse Building 89010 at Fort Hood, Texas. Quality assurance is strictly governed by the DLA Master List of Technical and Quality Requirements, with the manufacturer's inspection system required to comply with SAE AS9003 or ISO 9001 tailored to SAE AS9003. Sampling must follow MIL-STD-1916 or ASQ H1331, and acceptance requires zero non-conformances. Packaging must adhere to ASTM D3951 and MIL-STD-129, while the use of Class I ozone-depleting chemicals is prohibited. The contract includes specific preferences for HUBZone Small Business Concerns and prohibits the use of additive manufacturing unless specifically authorized. Invoicing and payment must be processed through the Wide Area WorkFlow system.

LAND SUPPLY CHAIN

POSTED

DEADLINE

Heavy-Duty Dual-Axle Trailer SupplyThis subcontract opportunity is for the manufacture and supply of a heavy-duty, highway-towable dual-axle trailer chassis to support prime contractors on Department of Defense projects at Dyess AFB. The required chassis must feature electric brakes, an electric trailer jack, safety tow chains, and an adjustable height hitch, all while maintaining full Department of Transportation compliance for highway transport, including the use of DOT-compliant lighting. The project is designated as a Total Small Business Set Aside under NAICS code 336211 and is managed by the Department of Defense agency FA4661 7 Cons Cd. Interested parties must submit their responses by September 23, 2026, for performance at Dyess AFB in Texas.

FA4661 7 Cons Cd

POSTED

DEADLINE

Manufacturing and Supply of Cargo Truck Body (NSN 2510-01-665-5306)This subcontract involves the manufacture and supply of one Cargo Truck Body under NSN 2510-01-665-5306 for the Department of Defense, specifically the Land Supplier Opns Vehicle Spt. The contractor is responsible for fabricating the body using industrial metal fabrication equipment in strict accordance with Reference Drawings 19207 12418616 (Rev C) and 19207 12418617 (Rev A). Performance will take place in Texarkana, Texas, and the project is designated as a Total Small Business Set-Aside under NAICS code 336211. Compliance requirements include ISO 9001:2015 certification and adherence to MIL-STD-129 and MIL-STD-2073-1E. Quality control and sampling must be implemented per MIL-STD-1916 or ASQ H1331. The response deadline for this opportunity is September 28, 2026.

LAND SUPPLIER OPNS VEHICLE SPT

POSTED

DEADLINE

71-Passenger School Bus SupplyThis subcontract involves the supply of one 71-passenger school bus for prime contractors working on Boston Public Schools procurement projects. The selected provider is responsible for manufacturing or sourcing a vehicle equipped with an internal combustion engine that adheres to all established school bus safety standards. The fully operational vehicle must be delivered to the designated location on Washington Street in Roxbury, Massachusetts. This opportunity is associated with NAICS code 336211 and is managed by the Boston Public Schools agency in Massachusetts, with a response deadline set for September 29, 2026.

101 - Boston Public Schools

POSTED

DEADLINE

CAP, TRUCK, MOUNTING

Solicitation # SPE7L1-26-T-11S6

LAND SUPPLY CHAIN

POSTED

DEADLINE

PANEL, VEHICULAR OPERAT

Solicitation # SPE7L3-26-T-252W

DLA Land And Maritime is soliciting quotes for the procurement of six vehicular operation panels, identified by NSN 2510012948390. This requirement is issued as a Request for Quote under solicitation number SPE7L326T252W and is designated as a total small business set-aside under NAICS code 336211. The delivery is to be made to DLA Distribution within 143 days after the order is placed. All quotes must be submitted electronically by the deadline of September 25, 2026. Interested parties should access the solicitation and any associated digitized drawings or military specifications through the provided electronic links, as hard copies are not available.

LAND SUPPLIER OPNS VEHICLE SPT

POSTED

DEADLINE

HINGE, DOOR, VEHICULAR

Solicitation # SPE7L3-26-T-252N

Solicitation SPE7L3-26-T-252N is a request for quotations issued by the Department of Defense, specifically the Land Supplier Operations Vehicle Support agency, for the procurement of 21 vehicular door hinges (NSN 2510-01-264-6546). The items are to be delivered to DLA Distribution Red River in Texarkana, Texas, with a required delivery date of February 22, 2027. This procurement is a non-small business set-aside, though a price evaluation preference is available for certified HUBZone small business concerns. Offers must be submitted via the DIBBS portal by September 25, 2026, and must be based on FOB Origin. The contract mandates strict adherence to technical and quality requirements found in the DLA Master List, including the prohibition of Class I ozone-depleting chemicals. Inspection and acceptance will occur at the point of origin. Technical data associated with this item is subject to ITAR or EAR export controls, requiring contractors to have approved JCP certification and specific training. Packaging must comply with MIL-STD-129 and RP001 standards. Additionally, the government will not evaluate or award contracts to offers utilizing additive manufacturing. Compliance with the Buy American Act, the Berry Amendment, and NIST SP 800-171 cybersecurity assessment requirements is mandatory. Payment and receiving reports must be processed electronically through the Wide Area WorkFlow system.

LAND SUPPLIER OPNS VEHICLE SPT

POSTED

DEADLINE

PLATE, REINFORCEMENT

Solicitation # SPE7L3-26-T-252M

Solicitation SPE7L3-26-T-252M is a fixed-price request for quotations issued by the Defense Logistics Agency Land and Maritime for 48 reinforcement plates, specifically spacer plates for frame reinforcement used on AM General M998 HMMWV series trucks. The procurement is categorized under NAICS 336211 and requires delivery within 119 days after the order date, with shipping designated as FOB Origin to the DLA Distribution New Cumberland facility in Pennsylvania. Inspection and acceptance will occur at the origin. The contract mandates strict adherence to the DLA Master List of Technical and Quality Requirements, which takes precedence over ASTM D3951 packaging standards. All items must be marked and labeled per MIL-STD-129, and palletization must follow RP001 requirements. Offerors must provide components only from sources qualified on the applicable Qualified Products List or Qualified Manufacturers List. Additionally, the technical data for this item is subject to export control under ITAR or EAR regulations, requiring approved JCP certification for access. Award evaluation may be automated, with a price evaluation preference available for certified HUBZone Small Business Concerns. Compliance with the Buy American Act, the Berry Amendment, and CMMC Level 2 self-assessment is required. All quotes must be submitted through the DIBBS portal by the deadline of September 25, 2026. Invoicing and payment processing are to be handled electronically via the Wide Area WorkFlow system.

LAND SUPPLIER OPNS VEHICLE SPT

POSTED

DEADLINE

PANEL, VEHICULAR OPE

Solicitation # SPE7L3-26-T-250M

Solicitation SPE7L3-26-T-250M is a fixed-price request for quotations issued by the Department of Defense, specifically DLA Land and Maritime, for the procurement of 47 vehicular operation panels. The required items correspond to Daimler Truck North America LLC part numbers 22-35018 or 22-35018-003, identified by NSN 2510013657135. The contract specifies a delivery period of 77 days after order, with an original required delivery date of February 7, 2026, and a need ship date of February 17, 2026. Delivery is FOB Origin, and the destination for both inspection and acceptance is the DLA Distribution DDSP New Cumberland facility in Pennsylvania. The procurement is subject to strict packaging and marking standards, requiring compliance with ASTM D3951 for general packaging and MIL-STD-129 for labeling, with DLA Master List requirements taking precedence. Palletization must adhere to RP001 standards. The solicitation incorporates various FAR and DFARS clauses, including the Buy American Act, Berry Amendment restrictions, and NIST SP 800-171 cybersecurity requirements. All quotes must be submitted via the DIBBS system. Award may be automated, and a price evaluation preference is available for HUBZone concerns. Invoicing and payment processing are to be handled electronically through the Wide Area WorkFlow system.

LAND SUPPLIER OPNS VEHICLE SPT

POSTED

DEADLINE

TREAD, METALLIC, NONS

Solicitation # SPE7L3-26-T-250C

Solicitation SPE7L3-26-T-250C is a request for quotations issued by the DLA Land and Maritime, Land Supplier Ops Vehicle Support, for the procurement of 16 units of metallic non-skid treads, identified by NSN 2510-01-481-4326 and Daimler Truck North America part number A22-35839-002. The procurement falls under NAICS code 336211. Quotes must be submitted via the DIBBS system by September 24, 2026. The required delivery date is September 16, 2025, with a delivery period of 97 days after order. Shipping is FOB Origin, and the destination for both inspection and acceptance is DLA Distribution Red River in Texarkana, Texas. The contract mandates strict adherence to DLA packaging requirements, specifically RP001 for palletization and MIL-STD-129 for marking and labeling. Non-hazardous materials must be commercially packaged per ASTM D3951, while hazardous materials must follow TQ requirement IP025 and the Hazard Communication Standard. The solicitation incorporates the DLA Master Solicitation for Automated Simplified Acquisitions Revision 105 and requires compliance with the Buy American Act, the Berry Amendment, and DFARS 252.204-7012 for safeguarding covered defense information. Payment and receiving reports are to be processed electronically through the Wide Area WorkFlow system.

LAND SUPPLIER OPNS VEHICLE SPT

POSTED

DEADLINE

FRAME SECTION, STRUC

Solicitation # SPE7L3-26-T-250U

Solicitation SPE7L3-26-T-250U is a Request for Quotations issued by DLA Land and Maritime for the procurement of seven structural vehicular frame sections, identified by NSN 2510-01-329-9904 and part number A22-34757-000. The requirement is categorized under NAICS 336211. Quotes must be submitted via the DLA Internet Bid Board System (DIBBS) by September 24, 2026. The original required delivery date is February 27, 2026, with a need ship date of March 3, 2026. Delivery is set as FOB Destination, with the shipping and receiving point located at the DLA Distribution DDSP New Cumberland Facility in Pennsylvania. The contract mandates strict adherence to MIL-STD-2073-1E for packaging and MIL-STD-129 for marking, including specific labels such as Arrow Up, Open This Side, and Team Lift Required. Palletization must comply with DLA packaging requirement RP001. Inspection and acceptance will occur at the destination per FAR 52.246-2. Key regulatory requirements include compliance with the Buy American Act, the Berry Amendment, and DFARS 252.204-7012 for safeguarding covered defense information. Payment and invoicing must be processed electronically through the Wide Area WorkFlow (WAWF) system.

LAND SUPPLIER OPNS VEHICLE SPT

POSTED

DEADLINE

More opportunities from Department Of Defense → LSO COMBAT VEHICLES AND ARMAMENT

Same awarding agency

Supply of Windshield Wiper Shaft and Pivot AssembliesThis subcontract through the Department of Defense and LSO Combat Vehicles and Armament involves the sourcing and supply of two used windshield wiper shaft and pivot assemblies, specifically NSN 2540-01-110-7211. The contractor is responsible for delivering these components to prime contractors supporting DLA Land and Maritime supply contracts, with performance taking place in Fargo, Minnesota. The agreement requires strict adherence to DFARS 252.225-7001 Buy American standards. Additionally, all materials must be packaged according to ASTM D3951 or TQ Requirement IP025 for hazardous materials as per FED-STD-313. The opportunity is categorized under NAICS code 423810, with a response deadline of September 28, 2026.

Construction and Mining (except Oil Well) Machinery and Equipment Merchant Wholesalers

POSTED

about 9 hours ago

DEADLINE

First Article Test (FAT) ProviderThis subcontract opportunity is for a First Article Testing provider to support prime contractors delivering DLA Land and Maritime supply contracts. The primary objective is to verify that NSN 1680-01-699-2124 meets all government specifications by testing the first production unit against technical, performance, and dimensional standards. The selected provider must utilize precision measurement equipment and adhere to ISO 9001 or SAE AS9003 standards to deliver a final FAT Report and certification. Managed by the LSO Combat Vehicles and Armament under the Department of Defense, this requirement is categorized under NAICS code 541380. The opportunity is designated as a Total Small Business Set-Aside. Interested parties must submit their responses by September 28, 2026.

Testing Laboratories and Services

POSTED

about 9 hours ago

DEADLINE

Manufacturer of NSN 1680-01-699-2124This subcontract opportunity, issued by the Department of Defense under the LSO Combat Vehicles and Armament, seeks a manufacturer to produce one unit of NSN 1680-01-699-2124 for prime contractors supporting DLA Land and Maritime supply contracts. The selected provider must fabricate the component according to precise technical specifications, ensuring compliance with MIL-STD-130 for Item Unique Identification and adhering to MIL-STD-2073-1E and MIL-STD-129 for packaging and marking. Delivery of the finished unit is required FOB Origin. The contract is designated as a Total Small Business Set-Aside under NAICS code 336413. To be eligible, contractors must hold SAE AS9003 or ISO 9001 certification and maintain CMMC Level 2 compliance. Interested parties must submit their responses by the deadline of September 28, 2026.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 9 hours ago

DEADLINE

Supply of Reaction Cylinder Assemblies (NSN 2540-01-6249487)This subcontract involves the manufacture or sourcing of two Reaction Cylinder Assemblies, identified by NSN 2540-01-6249487, for prime contractors supporting DLA supply contracts. The provider must adhere to the DLA Master List requirements and ensure all products are delivered FOB Origin. Performance is centered in Lewis McChord, Washington, under the agency oversight of LSO Combat Vehicles and Armament within the Department of Defense. The contractor is required to follow strict packaging and marking standards, specifically RP001, MIL-STD-2073-1E, and MIL-STD-129. Additionally, the agreement mandates compliance with environmental and safety regulations, prohibiting the use of Class I ozone-depleting chemicals and requiring the provision of MSDS and hazard labels in accordance with 29 CFR 1910.1200. The response deadline for this opportunity is September 28, 2026.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 9 hours ago

DEADLINE

Supply of Manual Control HandlesThis subcontract involves the fabrication and supply of manual control handles for prime contractors supporting LSO Combat Vehicles and Armament projects under the Department of Defense. The selected provider must manufacture the handles according to strict government specifications and ensure all items are packaged in compliance with RP001 DLA Packaging Requirements for Procurement. Additionally, the contractor is responsible for labeling any hazardous materials in accordance with the Hazardous Material Identification and Material Safety Data clause. The procurement falls under NAICS code 332510 and requires the physical delivery of the components to a designated destination. Interested parties must respond by September 28, 2026, following the posting date of September 16, 2026.

Hardware Manufacturing

POSTED

about 9 hours ago

DEADLINE

CYLINDER ASSEMBLY, REAC

Solicitation # SPE7L4-26-T-6975

Solicitation SPE7L4-26-T-6975 is a request for quotations issued by the DLA Land and Maritime LSO Combat Vehicles and Armament for the procurement of two reaction cylinder assemblies, identified by NSN 2540016249487. The requirement specifies a delivery timeline of 20 days after receipt of order, with an original required delivery date of September 14, 2026. The items are to be delivered FOB Origin to the AWCF SSF Rotational Force Korea at Lewis McChord, Washington. Technical compliance is governed by specific reference drawings and the DLA Master List of Technical and Quality Requirements, with a strict prohibition on the use of Class I ozone depleting chemicals. The contract mandates destination inspection and acceptance, requiring a Certificate of Conformance and adherence to sampling plans such as MIL-STD-1916 or ASQ H1331. Packaging and marking must comply with MIL-STD-2073-1E, MIL-STD-129, and DLA packaging requirements for procurement. Administrative requirements include the use of the Wide Area WorkFlow system for electronic invoicing and payment. The solicitation incorporates various FAR and DFARS clauses, including those regarding the Buy American Act, Berry Amendment, and safeguarding of covered defense information. Offerors must represent that they will not provide covered telecommunications equipment and are required to submit quotes via the DIBBS system by September 28, 2026.

Other Motor Vehicle Parts Manufacturing

POSTED

about 9 hours ago

DEADLINE

PARTS KIT, SEAT

Solicitation # SPE7L4-26-T-6978

Motor Vehicle Seating and Interior Trim Manufacturing

POSTED

about 9 hours ago

DEADLINE

CONTRACTOR FIRST ARTIC

Solicitation # SPE7L4-26-T-6979

Solicitation SPE7L4-26-T-6979 is a total small business set-aside issued by the DLA Land and Maritime, LSO Combat Vehicles and Armament, for the procurement of one aircraft seat identified by NSN 1680-01-699-2124. The requirement includes a First Article Test (FAT) under CLIN 0002, and the delivery timeline is specified as 125 days after the award. The item is designated as a critical application item and must be delivered FOB Origin to Camp Humphreys in Pyeongtaek, South Korea. The contract mandates strict quality and technical compliance, requiring the manufacturer's inspection system to meet SAE AS9003 or ISO 9001 standards. Key technical requirements include Item Unique Identification (IUID) per MIL-STD-130, CMMC Level 2 self-assessment, and adherence to MIL-STD-2073-1E for packaging and MIL-STD-129 for marking. Inspection and acceptance will occur at the origin. Payment and invoicing must be processed through the Wide Area WorkFlow (WAWF) system. Offerors must submit quotes via the DIBBS portal and comply with domestic material restrictions, including the Buy American Act and the Berry Amendment.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 9 hours ago

DEADLINE

SHAFT AND PIVOT ASSEMB

Solicitation # SPE7L4-26-T-6980

Solicitation SPE7L4-26-T-6980 is a fixed-price request for quotations issued by DLA Land and Maritime, LSO Combat Vehicles and Armament, for the procurement of two used windshield wiper shaft and pivot assemblies. These components are specifically for use on USAF Type A/S32P12 fire trucks manufactured by Ward La France, identified by NSN 2540011107211. The required delivery date is September 15, 2026, with a delivery window of 10 days after the award. Shipping is established as FOB Origin, while both inspection and acceptance will occur at the destination in Fargo, North Dakota. The contractor must comply with DLA packaging requirements, specifically PKGING DATA-QUP:001, and ensure all marking and labeling adhere to MIL-STD-129. Hazardous materials must be handled according to FED-STD-313 and TQ requirement IP025, with labels conforming to the Hazard Communication Standard. Additionally, the contract prohibits the use of Class I ozone-depleting chemicals and requires the removal of government identification from non-accepted supplies. Compliance with the Buy American Act, the Berry Amendment, and NIST SP 800-171 cybersecurity standards is mandatory. Payment processing must be conducted electronically through the Wide Area WorkFlow system.

Other Motor Vehicle Parts Manufacturing

POSTED

about 9 hours ago

DEADLINE

VALVE, RELAY, AIR PRESSU

Solicitation # SPE7L4-26-T-6981

Motor Vehicle Brake System Manufacturing

POSTED

about 9 hours ago

DEADLINE

HANDLE, MANUAL CONTROL

Solicitation # SPE7L4-26-T-6976

Hardware Manufacturing

POSTED

about 9 hours ago

DEADLINE

HEATER, VEHICULAR, COMPA

Solicitation # SPE7L4-26-T-6977

Solicitation SPE7L4-26-T-6977 is a request for quotations issued by the DLA Land and Maritime, LSO Combat Vehicles and Armament, for the procurement of 15 vehicular compartment heaters used in the M9 ACE. The requirement specifies NSN 2540-01-453-2490 and part number 50115 from HDT Expeditionary Systems Inc, and must include all necessary hardware and installation instructions. This is an FMS requirement for South Korea, with a delivery destination in Busan, KR, and a required delivery period of five days after receipt of order. The procurement is categorized under NAICS code 336320 and may be subject to automated award. Compliance is required for several technical and quality standards, including MIL-STD-2073-1E for packaging, MIL-STD-129 for marking, and DLA packaging requirements RP001. Inspection and acceptance are both designated at the point of origin per FAR 52.246-2. Invoicing and payment must be processed through the Wide Area WorkFlow system. The solicitation incorporates various FAR and DFARS clauses, including requirements for safeguarding covered defense information, combating trafficking in persons, and adherence to the Berry Amendment and Buy American Act. Quotes are due by September 28, 2026, via the DIBBS system.

Motor Vehicle Electrical and Electronic Equipment Manufacturing

POSTED

about 9 hours ago

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS