Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Technical Documentation and Configuration Management

Active

International

Response Deadline09/10/2026, 07:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract requires the development and ongoing maintenance of comprehensive technical data packages with strict adherence to ANSI/EIA-649C and STANAG 4427 Edition 3 standards for configuration management. This includes full lifecycle control of technical documentation such as drawings, codification data, and Operator Instruction Sheets, with structured processes for change control, version management, and accurate delivery of all artifacts. The work must ensure data integrity, traceability, and compliance across all phases of technical documentation support. The contract is classified as a subcontract under the NAICS code 541611, issued by the Department of National Defence of the Government of Canada. The solicitation was posted on July 27, 2026, with responses due by September 10, 2026. While specific performance location details are not provided, the work is expected to support Canadian defense objectives through reliable, standardized technical documentation practices. There is no set-aside designation specified, and the contract is open to eligible subcontractors meeting the technical and compliance requirements outlined in the referenced standards.

General Info

Develop and maintain technical data packages compliant with ANSI/EIA-649C and STANAG 4427 for Canadian defense.

Agency

Government of Canada → Department of National DefenceView Agency

NAICS

541611 - Administrative Management and General Management Consulting ServicesView NAICS

Place of Performance

CAN

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 27

subcontract

Response DeadlineSep 10

Submission deadline

Response Deadline

09/10/2026, 07:00:00 PM UTCin about 1 month

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyGovernment of Canada → Department of National Defence

ContactsNo contacts available

OfficeN/A

Organization / Agency

Government of Canada → Department of National Defence

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Development and maintenance of technical data packages, configuration management per ANSI/EIA-649C and STANAG 4427 Ed 3, including change control, versioning, and delivery of technical drawings, codification data, and Operator Instruction Sheets.

Similar Contracts

Same NAICS industry code

Non-Discrimination and Equal Employment ComplianceThe contract titled Non-Discrimination and Equal Employment Compliance requires strict adherence to all applicable federal and state laws prohibiting employment discrimination during the performance of subcontracted services. The obligation extends to all aspects of employment including hiring, promotion, compensation, training, and termination, ensuring that no individual is subjected to discrimination based on race, color, religion, sex, national origin, age, disability, or any other protected status under the law. Compliance must be actively maintained throughout the term of the agreement, with documentation and practices demonstrating consistent enforcement of equal opportunity policies. This subcontract is tied to the NAICS code 541611 and is procured by the Massachusetts agency COCC1 - Finance & Procurement, with performance expected to take place at Moody Street in Lowell, Massachusetts, 01854. The response deadline for submission is August 28, 2026, at 4:00 PM, and the posting date was July 29, 2026. While no set-aside designation is specified, the contractor must ensure that all employment practices align with legal requirements without exception, and failure to comply may result in contract termination or other sanctions. The place of performance is fixed, and no additional contact information is provided for inquiries beyond the official bidding portal.

COCC1 - Finance & Procurement

POSTED

about 23 hours ago

DEADLINE

Supply Chain Compliance and Origin DocumentationThe contract requires the preparation and submission of documentation to verify the domestic origin of bearing components in full compliance with DFARS 252.225-7016, which mandates strict adherence to the Buy American Act and related trade regulations. This includes providing detailed cost breakdowns, official supplier declarations affirming the origin of each component, and complete traceability records that link raw materials and manufacturing processes back to U.S.-based sources. All submitted materials must clearly demonstrate that every bearing component is mined, produced, manufactured, or substantially transformed within the United States, with no reliance on foreign-sourced inputs that would jeopardize compliance. The solicitation is issued under the NAICS code 541611 for management, scientific, and technical consulting services, and is categorized as a subcontract under the Department of Defense’s ASC Commodities Division. Respondents must meet the August 12, 2026 deadline for submission, with documentation needing to be thoroughly organized and auditable to support government verification efforts. While the place of performance and point of contact details are unspecified, the requirement applies to all entities involved in supplying bearing components and their associated supply chain partners. Failure to provide accurate, complete, and verifiable documentation will result in noncompliance and potential disqualification from contract award.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

Small Business Subcontracting Support (Administrative & Compliance)The contract requires support to assist a prime contractor in meeting small business subcontracting plan compliance, reporting obligations, and maintaining all necessary Federal Acquisition Regulation and Defense Federal Acquisition Regulation Supplement documentation to satisfy evaluation criteria. This administrative and compliance-focused engagement ensures that subcontracting goals are accurately tracked, reported, and aligned with federal requirements, thereby securing favorable evaluations during contract performance reviews. The work will involve ongoing monitoring of subcontractor performance, preparation of required submissions, and adherence to procedural guidelines to maintain compliance throughout the contract lifecycle. The solicitation is classified under NAICS code 541611 and is issued by the Department of Defense through LAND SUPPLIER OPERATIONS SMSG, with a response deadline of August 28, 2026. The type of procurement is designated as a subcontract, indicating the work is part of a larger prime contract effort. No specific set-aside classification or place of performance details are provided, and no point of contact information is listed. The task remains centered entirely on administrative and compliance functions to uphold the integrity of the prime contractor’s small business subcontracting program as mandated by federal regulations.

LAND SUPPLIER OPERATIONS SMSG

POSTED

DEADLINE

Regulatory and Compliance SupportThe contract seeks ongoing compliance support to ensure adherence to NIST SP 800-171, DFARS 252.204-7012, and CDTE reporting requirements, with a focus on protecting Controlled Unclassified Information. Key deliverables include the development and maintenance of a System Security Plan and the timely submission of required reports through DIBNet. All activities must align with federal cybersecurity standards for defense industrial base contractors handling sensitive government information. This is a small business set-aside subcontract under the NAICS code 541611, issued by the Department of Defense’s ASC Commodities Division. The solicitation was posted on July 29, 2026, with responses due by August 12, 2026. The work is intended for a total small business contractor, and performance will be conducted under the auspices of the Defense Industrial Base network, where regulatory adherence is critical to securing federal contracts. All support services must be delivered in a manner that sustains continuous compliance and minimizes exposure to data breaches or noncompliance penalties.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

Vendor Compliance & Ethics ConsultingLee County is seeking a vendor to provide advisory services focused on ensuring compliance with public sector ethics requirements, specifically addressing conflict of interest assessments, non-collusion statements, and the proper disclosure of gifts or outside income. The contract is structured as a subcontract under NAICS code 541611 and is open for response until August 19, 2026, with the solicitation posted on July 29, 2026. The work is expected to support the county’s commitment to transparency and ethical governance, requiring the contractor to deliver expert guidance tailored to public sector standards without specifying a physical location for performance. No set-aside provisions or organization-type restrictions are outlined, and all responses must be submitted through the designated online portal.

POSTED

DEADLINE

Construction Management And/Or Project Management Planning For Districtwide Projects

Solicitation # 20260728030

The contract pertains to construction management and/or project management planning for districtwide projects under solicitation number 20260728030, issued by the Rancho Santiago Community College District in California. The opportunity is classified under NAICS code 541611, indicating professional, scientific, and technical services related to architectural and engineering activities, and is targeted toward state and local government entities. All work must be performed in Santa Ana, California, with a zip code of 92706, and the solicitation was posted on July 29, 2026. Interested parties must submit responses by August 20, 2026, at 9:00 PM Pacific Time. The primary point of contact for inquiries is facilitiesrfp@rsccd.edu, and additional information can be found through the provided BidAmerica portal link. This procurement does not specify any small business set-aside programs or additional eligibility requirements beyond the scope of the work being offered.

Rancho Santiago Community College District

POSTED

DEADLINE

Capability Statement Development and Proposal SupportThe contract seeks the development of capability statements and compliance documentation to support a sole-source justification under FAR 12.102(a), specifically for NASA Shared Services Center under the National Aeronautics and Space Administration. The work involves drafting clear, persuasive narratives and evidence-based materials that demonstrate the unique qualifications and specialized expertise of a contractor, enabling NASA to justify awarding a contract without competitive bidding. The deliverables must align with federal acquisition regulations and be structured to meet rigorous internal review standards for sole-source procurements. The submission deadline is August 3, 2026, and the performance location is in Houston, Texas, with the North American Industry Classification System code 541611 indicating management, scientific, and technical consulting services. This is a subcontract opportunity, meaning the winning entity will be engaged by a prime contractor or another subcontractor rather than directly by the government. The effort requires precision in documentation, deep familiarity with federal compliance frameworks, and the ability to synthesize technical capabilities into convincing, audit-ready justification materials that satisfy NASA’s procurement requirements.

NASA Shared Services Center

POSTED

DEADLINE

Compliance and Regulatory Certification SupportThe contract titled Compliance and Regulatory Certification Support is a subcontract aimed at assisting offerors in developing and submitting comprehensive compliance documentation required for lease applications under specific federal regulations including NDAA Section 889, ABAAS, seismic safety, fire safety, and NEPA environmental review standards. The work entails guiding proposers through complex regulatory frameworks to ensure all technical and legal requirements are met accurately and timely, reducing the risk of submission rejection due to noncompliance. The effort is focused on enabling successful lease submissions by providing expert certification support across multiple domains of federal regulatory obligation. The contract was posted on July 29, 2026, with a response deadline of August 28, 2026, at 8:30 PM Eastern Time, and falls under NAICS code 541611 for Management Consulting Services. It is managed by the FPAC Bus Cntr-Mgmt Svs Division under the U.S. Department of Agriculture, with performance expected to occur in Derwood. While no set-aside designation or point of contact is specified, the scope clearly targets specialized regulatory advisory services tailored to government leasing initiatives requiring rigorous compliance vetting. All support activities must align with federal protocols and deliver certified documentation suitable for official review.

Fpac Bus Cntr-Mgmt Svs Division

POSTED

DEADLINE

Technical Report Writing and DocumentationThe contract requires the preparation of a final digital AWMA report that includes detailed methodology, findings, mapped data, and conclusions, all fully aligned with federal reporting standards. The deliverables must be comprehensive and technically rigorous, ensuring accuracy and compliance with established government protocols for documentation and data presentation. This effort is classified as a subcontract under a Small Business Set Aside, specifically designated for total small business participation, and is governed by the NAICS code 541611 for scientific and technical consulting services. The solicitation was posted on July 29, 2026, with a firm deadline for responses set for August 12, 2026, at 4:00 p.m. The contracting entity is the Department of Agriculture through its FPAC Business Center Acquisition Division, with the place of performance and point of contact details not provided. All work must be completed in accordance with federal guidelines and submitted in digital format as specified.

Fpac Bus Cntr-Acq Division

POSTED

DEADLINE

Quality Assurance and Inspection ServicesThis contract requires the performance of origin inspection, testing, and documentation services to ensure full compliance with contractual obligations and the Federal Acquisition Regulation clause 52.246. The work is focused on verifying that all materials and processes meet required quality standards prior to acceptance, with an emphasis on traceability, certification, and adherence to defense procurement guidelines. The services are critical to maintaining integrity in the supply chain and must be executed with precision to satisfy Department of Defense requirements. The contract is classified as a subcontract under the SBA Certified Women-Owned Small Business (WOSB) Program Sole Source authority, reserved exclusively for businesses certified under the WOSB program. It falls under NAICS code 541611 for Management, Scientific, and Technical Consulting Services and is assigned to the Department of Defense through its DLA Aviation office in Chambersburg, Pennsylvania, with the place of performance located at 17201. Interested parties must submit responses by August 28, 2026, to be considered for award under this sole-source opportunity.

Al DLA Aviation At Huntsville

POSTED

DEADLINE

Prohibited Telecommunications Equipment Compliance ReviewThe contract requires conducting comprehensive supply chain due diligence to verify that no covered telecommunications equipment or services, as defined under applicable federal regulations, are present in any products or services provided under the subcontract. This includes evaluating all tiers of the supply chain to ensure compliance with the prohibition on using equipment from specified foreign adversaries, with a primary focus on adhering to the requirements of DFARS 252.204-7018. Detailed documentation must be prepared and maintained to demonstrate thorough vetting and certification of all suppliers and components, ensuring full alignment with Department of Defense cybersecurity and procurement standards. The subcontract is issued by the Naval Surface Warfare Center Crane, part of the Department of Defense, with performance to occur in Crane, Indiana, 47522. The solicitation was posted on July 29, 2026, with a hard deadline for responses on August 5, 2026. The contract falls under NAICS code 541611, which pertains to management, scientific, and technical consulting services, indicating the nature of the work is advisory and compliance-oriented rather than operational. There is no set-aside designation, and the submission is open to eligible subcontractors capable of fulfilling the strict compliance and documentation requirements necessary for DoD contractual obligations.

POSTED

DEADLINE

Cybersecurity Compliance & CMMC Implementation SupportThe contract seeks support for achieving and maintaining CMMC Level 2 compliance under the Department of Defense’s cybersecurity framework, with a focus on executing self-assessments, submitting System for Award Management Performance and Risk Summary (SPRS) data, developing comprehensive cybersecurity policies aligned with NIST SP 800-171, and delivering employee training on DFARS requirements for cyber incident reporting. Services will be delivered to ensure the organization meets all mandatory controls and documentation standards necessary for CMMC Level 2 certification, with an emphasis on practical implementation and readiness for audits. Work is to be performed at the Crane location in Indiana, and the subcontract is managed by the Naval Surface Warfare Center, Crane Division. The solicitation was posted on July 29, 2026, with a firm response deadline of August 5, 2026, and falls under the NAICS code 541611 for Management, Scientific, and Technical Consulting Services. The effort requires expertise in defense cyber compliance, including a clear understanding of the CMMC framework, DFARS clause 252.204-7012, and the ability to guide internal teams through documentation, training, and reporting obligations without external oversight.

POSTED

DEADLINE

More opportunities from Government of Canada → Department of National Defence

Same awarding agency

Catering Services for BNQ in Halifax NS

Solicitation # W3371-26-T007

The Government of Canada, through the Department of National Defence, is soliciting offers for catering services at HMCS Scotian in Halifax, Nova Scotia, to support the Royal Canadian Navy. The opportunity, identified by solicitation number W3371-26-T007, was posted on July 29, 2026, with a response deadline of August 10, 2026. Offerors are expected to deliver comprehensive meal services tailored to the operational needs of naval personnel stationed at the facility, ensuring food quality, safety, and timely service in alignment with military standards. The contract is open to eligible contractors without specific set-aside provisions, and all proposals must meet the requirements outlined in the solicitation. Timothy Pelletier serves as the primary point of contact for this solicitation, reachable via email at timothy.pelletier@forces.gc.ca or by phone at 902-427-4428. Offers must be submitted electronically through the Canada Buys portal, where full details of the tender are available. Performance of the services will be conducted exclusively at HMCS Scotian in Halifax, and successful bidders will be required to comply with all federal procurement regulations, operational protocols, and health and safety standards applicable to government installations. The contract aims to secure a reliable, high-quality catering provider capable of sustaining operations in a secure, mission-critical environment.

POSTED

DEADLINE

Catering Services for BNQ in Quebec, QC

Solicitation # W3371-26-T008

The Government of Canada, through the Department of National Defence, is soliciting offers for catering services at HMCS Montcalm in Québec, Québec, to support the Royal Canadian Navy. The solicitation, identified as W3371-26-T008, was posted on July 29, 2026, with a response deadline of August 10, 2026, at 8:00 PM Eastern Time. Offerors are expected to deliver comprehensive food services tailored to the operational needs of naval personnel stationed at the facility, ensuring meals meet nutritional, safety, and logistical standards required in a military environment. The contract is open to eligible parties under federal procurement guidelines, with no specified set-aside for small or diverse businesses. Timothy Pelletier serves as the primary point of contact for this solicitation, providing assistance and clarification to interested parties via email at timothy.pelletier@forces.gc.ca or by phone at 902-427-4428. All services must be performed at HMCS Montcalm in Québec, and offers must fully address the scope, staffing, menu planning, supply chain management, and compliance with federal health and safety regulations. Proposals submitted after the deadline will not be considered, and bidders are encouraged to review the official tender page on CanadaBuys for additional procedural details and requirements.

POSTED

DEADLINE

SAR Vacuum Spine Boards

Solicitation # W3999-270001

The Department of National Defence is seeking to procure twenty-seven lightweight vacuum spine boards under solicitation W3999-270001, with all deliverables required to be received by 5 October 2026 and the contract period running until 5 December 2026. The spine boards must be approximately six feet in length,具备 a chambered vacuum bead system for enhanced immobilization during airlift, vertical rescue, and austere SAR operations, and must be radiolucent, MRI-compatible, latex-free, and resistant to puncture, abrasion, moisture, and bodily fluids. Each unit must include a manual vacuum pump with no external power requirement, a complete restraint strap system, integrated carry handles for multiple lifting configurations, and be compactly foldable or rollable for aircraft storage. The product must be compatible with existing rigid spine boards and the Ferno Cot transport system. All items must be new, conform to the latest specifications, and be delivered Delivered Duty Paid to CFB Winnipeg 17 Wing, 715 Wihuri Road, Winnipeg, Manitoba, under Incoterms 2020, with all customs duties, GST/HST, and excise taxes included in the quoted price. Payment will be made at a fixed price upon delivery, with undisputed invoices settled within 30 days of receipt, subject to a mandatory 15 percent tax withholding by the Canada Revenue Agency. Award will be made to the lowest priced compliant offer, with all submissions evaluated against mandatory technical criteria; failure to meet any of these criteria results in non-responsiveness. Proposals must be submitted electronically in three sections—Technical Offer, Financial Offer, and Offer Submission Forms—with supporting documentation in either English or French, and must remain valid for 60 days beyond the closing date of 25 August 2026. Offers may not exceed five megabytes unless submitted across multiple emails, and must avoid embedded scripts or macros. The Contractor must certify compliance with Canada’s Code of Conduct for Procurement, lack of conflict of interest, and that goods are not produced using forced labor. The Contractor is also required to maintain valid AIEE status, use environmentally preferable packaging where feasible, and ensure all packaging materials are reusable, returnable, or recyclable, excluding packaging tape. The contract is governed by the laws of Manitoba, requires written amendments, prohibits assignment without Canada’s consent, and includes a 12-month warranty. The Contracting Authority is Adam Bidzinski

Surgical Appliance and Supplies Manufacturing

POSTED

DEADLINE

Digital Feasibility Study of a solid-state hydrogen-powered Light Armoured Vehicle (LAV)

Solicitation # W8486-270848/A

The Department of National Defence is seeking a single contractor to conduct a digital feasibility study for a solid-state hydrogen-powered Light Armoured Vehicle with a maximum weight of 45,000 lbs, under contract number W8486-270848/A. The study must focus exclusively on the powertrain configuration, including SWaP analysis and platform configurations for 4x4, 6x6, 8x8, and tracked designs, with deliverables including 3-D CAD models, a project schedule, mission profile, draft and final reports, and a project presentation. The work must be completed by March 20, 2028, under a two-year initial contract term with a ceiling value of $1,200,000, split between $500,000 for fiscal year 2026/27 and $700,000 for 2027/28. Payment is cost-reimbursable based on milestone achievements, with invoices required upon completion of each deliverable and payment issued within 30 days of receipt of a compliant invoice. Bidders must have a valid Business Number, submit offerings in three distinct sections—technical, financial, and declaration forms—and adhere to strict evaluation criteria that prioritize project management certification (15 points), proven experience in three or more relevant projects (30 points), and prior work on military vehicle platforms. The proposal must include an Offeror Declaration Form and satisfy mandatory requirements identified with "must" or "mandatory," with failure to meet any disqualifying the bid. All submissions must be sent exclusively through the SAP Business Network, and inquiries must be directed to Mariam Isak at mariam.isak@forces.gc.ca. The contract prohibits contingency fees, requires compliance with applicable laws and the Procurement Code of Conduct, and mandates detailed recordkeeping of all costs and correspondence. While no security clearances are required, the contractor must maintain records in machine-readable formats and comply with Treasury Board policies regarding contracts with former public servants. The work will be performed in the National Capital Region, and materials may be submitted in either English or French.

Research and Development in the Physical, Engineering, and Life Sciences (except Nanotechnology and Biotechnology)

POSTED

DEADLINE

TBIPS - Implementation and Deployment of Cloud Analytics Solutions

Solicitation # W6369-24-P5PN

The Directorate Joint Defence Cloud Program (DJDCP) seeks informatics professionals to support the implementation and deployment of cloud analytics solutions for the Department of National Defence and Canadian Armed Forces, advancing the transition from traditional on-premises IT to secure, modern cloud-based services. The contract, solicited under W6369-24-P5PN and titled “TBIPS - Implementation and Deployment of Cloud Analytics Solutions,” focuses on hands-on technical support for cloud environment setup, platform management, operational troubleshooting, and the delivery of business solutions aligned with DND/CAF modernization goals. Performance is centered in the National Capital Region, primarily Ottawa, with work conducted at government or contractor sites as directed, and all activities must comply with stringent Canadian security protocols including PROTECTED, CONFIDENTIAL, SECRET, and TOP SECRET classification requirements. Contractors must hold a SECRET-level facility security clearance, and all personnel accessing classified information must possess at least RELIABILITY STATUS or SECRET clearance depending on role, with no use of personal devices permitted and no processing or storage of classified material allowed without prior written authorization from the Contract Security Program. Evaluation is based on a merit-based trade-off methodology, with technical merit weighted at 90% and price at 10%, requiring a minimum pass mark of 120 out of 150 points across seven key criteria including previous contract value, experience with cloud adoption and modernization, cloud service provider partnerships, and enterprise cloud analytics expertise. Proposals must be submitted in three bound volumes—Technical, Financial, and Certifications—with electronic formats limited to .pdf, .doc, and .xls files, and hard copies required to use recycled paper and environmentally sustainable practices. Contractors must certify compliance with the Federal Contractors Program for Employment Equity, provide detailed information on proposed personnel including language proficiency, availability, and potential conflicts from multi-contract engagements, and submit a Certificate of Independent Bid Determination. Payment terms extend to 180 days, with disbursement via direct deposit, wire transfer, EDI, or LVTS, and quarterly financial reporting is mandatory. The contract has a fixed two-year term with no option periods, and replacement of key personnel requires a formal remediation plan within 10 working days. All deliverables, including monthly progress reports and technical documentation, must be submitted in editable Microsoft Office formats and are subject to government inspection and acceptance at DND facilities or contractor locations.

Computer Facilities Management Services

POSTED

DEADLINE

E60HN-16ELEC – Stream 2 - Oscilloscope and multimeters (Atlantic)

Solicitation # W7702-2026-00644-A

This contract, E60HN-16ELEC – Stream 2 – Oscilloscopes and Multimeters (Atlantic), is issued by the Department of National Defence under the Government of Canada to procure electronic test equipment exclusively for use in the Atlantic region, specifically targeting procurement activities centered in Halifax, Nova Scotia. Only suppliers who have successfully qualified under Stream 2 of the Electronic Products Supply Arrangement are eligible to participate, with a pre-approved list of 25 vendors including Anixter Canada Inc., Graybar Canada, Nedco-Rexel, TestEquity, RS Americas (Canada), and others, all of whom are authorized to provide oscilloscopes, multimeters, and related electronic measurement devices. The Crown maintains the flexibility to negotiate directly with any of these qualified suppliers to meet immediate or specific operational requirements without requiring full competitive bidding for each individual purchase. The solicitation is formally identified by number W7702-2026-00644-A, was posted on July 29, 2026, and bids must be submitted by August 13, 2026. The procurement falls under a federal government framework with no set-aside classification, emphasizing efficiency and pre-vetted supplier access rather than open competition. Courtney Smart, Contracting Authority, serves as the primary point of contact for all inquiries and submissions. The contract structure ensures rapid access to high-quality, calibrated electronic test equipment critical to defence operations, while maintaining accountability through a restricted supplier pool already vetted for technical capability and service standards.

Other Electronic Parts and Equipment Merchant Wholesalers

POSTED

DEADLINE

NPP-Catering Services for BNQ in Quebec, QC

Solicitation # W3371-26-T008_NPP

The Government of Canada, through the Department of National Defence, is soliciting offers for catering services to be provided at HMCS Montcalm in Québec, QC, to support the Royal Canadian Navy. The solicitation, identified as W3371-26-T008_NPP, was posted on July 29, 2026, with a deadline for responses set for August 10, 2026. Offerors must be prepared to deliver comprehensive food services tailored to the operational and logistical needs of military personnel stationed at the facility. The contract is a federal procurement initiative with no specific set-aside designation, open to all eligible vendors who can meet the required standards for quality, safety, and consistency in meal service. Timothy Pelletier serves as the primary point of contact for this solicitation, reachable via email at timothy.pelletier@forces.gc.ca or by phone at 902-427-4428, and holds the role of Contracting Authority. All performance of the services must take place at the designated location in Québec City, Québec, with no alternative venues permitted. Potential bidders are directed to the official Canada Buys portal for full details and documentation related to the tender. The contract represents a key support function for naval operations, requiring reliable, high-volume catering capabilities that align with government regulations and military standards.

POSTED

DEADLINE

RCAF SARTech GPS Watches

Solicitation # W8485-279541/A

The Department of National Defence is soliciting bids for the procurement of 240 commercial off-the-shelf ruggedized wearable GPS tracking devices and 240 corresponding tactical replacement straps for use by Royal Canadian Air Force Search and Rescue Technicians in extreme operational environments. The devices must meet stringent technical criteria including a minimum of 100 hours of continuous battery life or 260 hours in solar-assisted mode, dual-frequency GNSS with automated satellite selection, preloaded full-color topographical mapping with offline dynamic routing, a fiber-reinforced polymer chassis with titanium bezel or backplate, a sapphire lens, and an integrated variable-intensity LED flashlight offering both white and tactical lighting. The replacement straps must be 26 mm wide, constructed of chemical-resistant silicone elastomer resistant to aviation fluids, equipped with a tool-free quick-release mechanism, and feature stainless steel, titanium, or DLC-coated titanium hardware with a solid matte non-reflective finish in approved uniform colors. All items must be new production from the original manufacturer or an accredited agent, conforming to current specifications, with full traceability and manufacturer records retained for proof of origin. Each unit must be individually packaged according to Canadian Forces Packaging Specification D-LM-008-036/SF-000, accompanied by a Certificate of Compliance for airworthiness, and marked in accordance with DND standards including D2000C, D2001C, D2025C, and D6010C. Delivery is to be made FCA at the contractor’s location to 25 Canadian Forces Supply Depot in Montreal, Quebec, with all shipments subject to Incoterms 2000 and delivered duty paid including customs duties, GST/HST, and excise taxes incorporated into the quoted price. Bids must be submitted in three separately bound sections—Technical, Financial, and Certifications—with pricing appearing only in the financial section. Proposals must be received by the PWGSC Bid Receiving Unit no later than August 11, 2026, via approved channels including epost Connect, and cannot be emailed directly to contact addresses. Bidders are required to submit the Integrity Declaration Form and documentation under the Ineligibility and Suspension Policy, and must certify they are not on the Federal Contractors Program’s “FCP Limited Eligibility to Bid” list. Compliance with all mandatory technical criteria for both the devices (MTC 1-5) and straps (ST

Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

POSTED

DEADLINE

CIRCUIT BREAKERS

Solicitation # W8482-264981/A

The Department of National Defence is soliciting bids for 80 circuit breakers, with 40 units required for delivery to CFB Halifax and 40 units to CFB Esquimalt, under solicitation number W8482-264981/A. Each unit must be the Siemens Energy Global GmbH & Co. KG part number 3RV2041-MA10, identified by NCAGE D1149 and GSIN 5925, with bids for equivalent or substitute products permitted provided full technical details and manufacturer information are submitted. The contract follows a Lowest Price Technically Acceptable (LPTA) methodology, where compliance with mandatory technical, packaging, marking, and preservation standards is a pass/fail requirement, and award will go to the lowest-priced compliant offer. All products must adhere to Canadian Forces packaging standards D-LM-008-001/SF-001 and marking standards D-LM-008-002/SF-001, while international contractors must meet NATO TL8100-0100 guidelines. Items must be packed on standard wooden pallets, properly labeled with UCC/EAN-128 barcodes using Application Identifiers for PSCN or NSN, and include all required human-readable data such as manufacturer name, part number, manufacture date, and expiration date. Each item must be stamped or etched with the manufacturer and part number. Deliveries are to be made DDP to the specified military bases, with payment processed electronically via direct deposit or wire transfer to designated Canadian Forces accounts. The contract requires strict adherence to defense-specific clauses covering controlled goods, anti-forced labor, international sanctions, data protection, and security clearance obligations, with the Government retaining the right to inspect goods at any point in the supply chain. Contractors must certify Canadian content eligibility and comply with all applicable procurement ethics, including the Federal Contractors Program for Employment Equity, and provide comprehensive documentation including technical and financial offers in English or French through the Government Electronic Tendering Service or CPC Connect by the deadline of August 10, 2026, at 14:00 EDT. No contract value is specified, and pricing must be submitted in separate spreadsheet and PDF formats, with the PDF deemed authoritative in case of discrepancies.

Switchgear and Switchboard Apparatus Manufacturing

POSTED

DEADLINE

Fluke 5560A/2G Multi-Product Calibrators

Solicitation # W8486-270947A

The Department of National Defence, under the Government of Canada, has issued a solicitation for the procurement of Fluke 5560A/2G Multi-Product Calibrators, with a response deadline of August 12th, 2026, and a requested delivery date of January 15th, 2027. Each calibrator must be accompanied by a Certificate of Calibration dated no more than 90 days prior to delivery, ensuring recent and verified accuracy. The solicitation, identified by number W8486-270947A, was published on Buyandsell on July 29th, 2026, and will remain active for 15 calendar days. The contract is open to federal procurement, with no specific set-aside designated, and performance is anticipated to occur in Canada. Viktoria Melnichuk serves as the primary point of contact for inquiries, reachable via email and phone, and all bids must be submitted through the official tender portal before the deadline.

Instruments and Related Products Manufacturing for Measuring, Displaying, and Controlling Industrial Process Variables

POSTED

DEADLINE

Solar Powered LED Strobe Lights

Solicitation # W8486-260728/A

The Department of National Defence is seeking solar-powered LED strobe lights with a red light output, specified under UNSPSC 39110000 and part number 3337-00001, with NCAGE code 0GWV8 or an equivalent alternative. The requirement is for delivery to two locations: 25 CFSD Montreal at 6363 Rue Notre Dame St E in Montreal, Quebec, and 7 CFSD Edmonton at 195 Ave & 82nd Street in Edmonton, Alberta. Each item is quoted per unit, and bidders proposing substitute or equivalent products must clearly identify the brand, model, part number, and NCAGE code of the alternative being offered. The Crown reserves the right to negotiate terms with any supplier during the procurement process. All documentation may be submitted in either English or French, Canada’s official languages. The solicitation, titled Solar Powered LED Strobe Lights, is identified by number W8486-260728/A and was posted on July 29, 2026, with a deadline for responses set for September 7, 2026, at 7:00 PM Eastern Time. The procurement is conducted under the Government of Canada’s federal procurement framework, managed by the Department of National Defence, with Robert Coffin serving as the primary contracting authority, reachable via robert.coffin@forces.gc.ca. The place of performance covers both Quebec and Alberta, excluding the National Capital Region. Bidders must ensure compliance with delivery specifications and provide full details for any proposed alternative product to be considered valid.

Electric Lamp Bulb and Other Lighting Equipment Manufacturing

POSTED

DEADLINE

in about 1 month

Electrical Load Banks

Solicitation # W6369-27-X002

The Department of National Defence, through Defence Research and Development Canada, is seeking to procure Electrical Load Banks to support field trials at an Arctic site and the Over The Horizon Radar test bed at the Shirley’s Bay location in Ottawa. The requirement is part of the broader OTHR Initiative and mandates that all deliverables be ready for shipment no later than 90 days after contract award. The procurement is conducted under the Canadian Free Trade Agreement and the Canada-Korea Free Trade Agreement and is subject to a Comprehensive Land Claims Agreement. The Crown intends to award a single contract based on the highest combined rating of the Inuit Benefit Plan commitment and price, with no limitation to firms registered in the Inuit Firm Registry, and retains the right to negotiate with any supplier. There is no security clearance requirement for this procurement. Proposals must be submitted by July 31, 2026, and may be filed in either official language of Canada. The contracting authority is Scarlet Torraka Almendarez, reachable via email at scarlet.torrakaalmendarez@forces.gc.ca, and the solicitation number is W6369-27-X002. The Department reserves the right to withhold award regardless of the submissions received, and in the event of a discrepancy between the notice and the full request for proposals, the RFP takes precedence. No contract currently exists for this requirement.

Switchgear and Switchboard Apparatus Manufacturing

POSTED

DEADLINE