Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Temporary Access Point Fabrication & Installation (Machinery Room Entry)

Active

Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract involves the design, fabrication, installation, and eventual removal of a temporary metal access hatch in the Main Machinery Room of the USS FORT LAUDERDALE. The primary objective of this project is to provide necessary access for critical fuel header pipe repairs. The work is managed by the Mid Atlantic Reg Maintenance Ctr under the Department of Defense and will be performed in Norfolk, Virginia. The project falls under NAICS code 332322 and was posted on August 17, 2026.

General Info

Subcontract for temporary metal access hatch installation and removal on USS FORT LAUDERDALE.

Agency

Department Of Defense → Mid Atlantic Reg Maintenance CtrView Agency

NAICS

332322 - Sheet Metal Work ManufacturingView NAICS

Place of Performance

Norfolk, VA, 23511, USA

Set-Aside

NONE

Documents

This scope was carved out of N50054-26-118.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

USS FORT LAUDERDALE A6A1 RCC 9N

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedAug 17

subcontract

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → Mid Atlantic Reg Maintenance Ctr

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → Mid Atlantic Reg Maintenance Ctr

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Design, fabricate, install, and later remove a temporary metal access hatch into the Main Machinery Room aboard USS FORT LAUDERDALE to enable critical fuel header pipe repairs.

Similar Contracts

Same NAICS industry code

Roof Hatch Assembly ManufacturingThis subcontract opportunity with the Department of Defense, specifically the LSO Combat Vehicles and Armament, involves the manufacture and delivery of 284,000 roof hatch assemblies for military vehicles. The selected provider must ensure all products comply with DLA technical, packaging, and labeling standards. The project falls under NAICS code 332322 and is designated as a Total Small Business Set-Aside. The solicitation was posted on August 17, 2026, with a response deadline of September 1, 2026. Interested parties must submit their proposals by this date to be considered for the contract.

LSO COMBAT VEHICLES AND ARMAMENT

POSTED

about 16 hours ago

DEADLINE

Small Business and Socioeconomic ParticipationThis subcontracting opportunity is issued by the Department of Defense through Construction & Equipment MRO SVC I for the production of electric fan covers. The project is specifically designed to encourage participation from certified small and socioeconomically disadvantaged businesses, operating under NAICS code 332322. Interested parties must submit their responses by August 24, 2026. The solicitation was officially posted on August 17, 2026, and further details regarding the submission process can be accessed via the DIBBS portal.

CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

about 16 hours ago

DEADLINE

Manufacturing of Electric Fan Covers (NSN 4140-12-330-8395)This subcontract involves the manufacturing of 39,000 electric fan covers under National Stock Number 4140-12-330-8395 for the Department of Defense, specifically the Construction and Equipment MRO SVC I agency. The production must adhere to strict military specifications, requiring full compliance with MIL-STD-129 for marking and ASTM D3951 for packaging standards. The opportunity falls under NAICS code 332322 and was posted on August 17, 2026. Interested parties must submit their responses by the deadline of August 24, 2026.

CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

about 16 hours ago

DEADLINE

Light Retaining Bracket Supply and PackagingThis subcontract, issued by the Department of Defense through Construction & Equipment MRO SVC I, requires the supply of 16 units of light retaining brackets under NSN 6220-01-631-4415. The contractor must ensure all items adhere to strict military-compliant packaging, labeling, and traceability documentation standards. The opportunity was posted on August 17, 2026, with a response deadline of August 24, 2026. Classified under NAICS code 332322, this procurement focuses on the delivery of specialized hardware components to meet specific defense requirements.

CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

about 16 hours ago

DEADLINE

Precision Metal Fabrication and MachiningThis subcontract opportunity with the Department of Defense Land Supply Chain involves the precision manufacture of a mounting bracket. The contractor is required to perform cutting, bending, drilling, and finishing processes to ensure the final product adheres to the specific requirements of NSN 5340016995880. The project falls under NAICS code 332322 for sheet metal work. Interested parties must submit their responses by the deadline of August 28, 2026, following the posting date of August 17, 2026.

LAND SUPPLY CHAIN

POSTED

about 16 hours ago

DEADLINE

Precision Metal Fabrication – Angle Bracket ManufacturingThe Department of Defense, through the Land Supply Chain agency, is seeking a subcontractor for the precision metal fabrication of 17 angle brackets. These components must be manufactured to strict military specifications to ensure they meet all necessary form, fit, and function requirements for defense applications. This procurement falls under NAICS code 332322 and will be performed in Albany. Interested parties must submit their responses by August 28, 2026, following the solicitation posted on August 17, 2026.

LAND SUPPLY CHAIN

POSTED

about 16 hours ago

DEADLINE

Ventilation Louver SupplyThis subcontract opportunity is for the supply of two 18x24 inch door-mounted ventilation louvers intended for make-up air. The equipment must be designed for exterior use and capable of withstanding outdoor conditions. The contract is being issued by EQUUS Workforce Solutions as the operator of the Wind River Job Corps. The solicitation was posted on August 17, 2026, with a response deadline of September 2, 2026. This opportunity is set aside for various small business categories, including Small Disadvantaged Businesses, Women-Owned Small Businesses, HUBZone Small Businesses, and Veteran-Owned Small Businesses, falling under NAICS code 332322.

EQUUS Workforce Solutions operator of the Wind River Job Corps

POSTED

about 17 hours ago

DEADLINE

Roofing Specialty Subcontractor – Metal Roofing and Sheet Metal FabricationMiddle Georgia State University is seeking a specialty subcontractor for the installation of metal roof systems and sheet metal fabrication. The scope of work includes the fabrication and installation of custom flashings, gutters, downspouts, and coping on university buildings, requiring specialized labor and technical expertise. This subcontract opportunity was posted on August 17, 2026, with a response deadline of September 17, 2026. The project falls under NAICS code 332322 and is managed through the state of Georgia's procurement system.

Middle Georgia State University

POSTED

about 18 hours ago

DEADLINE

in about 1 month

Custom Stainless Steel Environmental Chamber Design & FabricationThe National Aeronautics And Space Administration, through the NASA Shared Services Center, is seeking a subcontractor for the design and fabrication of a custom programmable stainless steel environmental chamber. This specialized equipment must be capable of operating across an extreme temperature range from -196°C to 350°C to facilitate the mechanical testing of soft materials. The project falls under NAICS code 332322 and will be performed in Cleveland, Ohio. Interested parties must respond by August 19, 2026, following the posting date of August 17, 2026.

NASA Shared Services Center

POSTED

about 21 hours ago

DEADLINE

Equipment Rack Fabrication & InstallationThis subcontract opportunity with the Department of Defense, specifically the W7M2 Uspfo Activity Flang 125, involves the fabrication and installation of secure, custom equipment racks for AV and computing hardware. These racks must be specifically designed to support sanitization processes during classification changes. The project is categorized under NAICS code 332322 and will be performed in the 32218 zip code area. The contract is designated as a total Small Business Set Aside. Interested parties must respond by August 21, 2026, at 3:00 PM. The solicitation was officially posted on August 17, 2026.

W7M2 Uspfo Activity Flang 125

POSTED

about 21 hours ago

DEADLINE

Precision Hardware Manufacturing for Military Butt HingesThis subcontract opportunity with the Department of Defense, specifically the Land Supplier Opns Vehicle Spt agency, involves the precision manufacture of defense-specific hardware. The primary requirement is the production of butt hinges that strictly adhere to provided technical drawings and military standards, including MIL-STD-1916, while ensuring full traceable materials compliance. The solicitation was posted on August 16, 2026, with a response deadline of August 27, 2026. Classified under NAICS code 332322, this project focuses on high-specification hardware manufacturing to support military vehicle operations.

LAND SUPPLIER OPNS VEHICLE SPT

POSTED

DEADLINE

Manufacturing and Supply of Identification Plate (NSN: 9905LN0017870)This subcontract with the Department of Defense, specifically the DLA Fleet Readiness Center Southeast, requires the manufacture, engraving, packaging, and delivery of five metal identification plates. The items are identified by part number 735680 and national stock number 9905LN0017870, and must be produced in compliance with established military standards. The project falls under NAICS code 332322 and is to be performed in Jacksonville, Florida. Interested parties must respond by August 24, 2026, following the posting date of August 16, 2026.

DLA FLEET READINESS CENTER SOUTHEAST

POSTED

DEADLINE

More opportunities from Department Of Defense → Mid Atlantic Reg Maintenance Ctr

Same awarding agency

Mission-Critical Repair Integration & SchedulingThe Mission-Critical Repair Integration and Scheduling subcontract, issued by the Mid Atlantic Reg Maintenance Ctr under the Department of Defense, focuses on the coordination of temporary access work with Key Event Work Complete milestones. The primary objective is to ensure that these activities are aligned to prevent any interference or negative impact on urgent propulsion system repairs. This project is categorized under NAICS code 541611 and is designated for performance in Norfolk, Virginia. The contract emphasizes the critical nature of propulsion system maintenance and requires precise scheduling to maintain operational efficiency during high-priority repair cycles.

Administrative Management and General Management Consulting Services

POSTED

about 21 hours ago

DEADLINE

Technical Certification & Compliance VerificationThe Technical Certification and Compliance Verification subcontract, issued by the Department of Defense through the Mid Atlantic Reg Maintenance Ctr, focuses on the execution and documentation of technical certifications necessary for government approval. The scope of work requires the performance of certifications that must be validated by a technical authority, legal counsel, and a contracting officer to ensure full regulatory compliance. This project is categorized under NAICS code 541330 and is scheduled for performance in Norfolk, Virginia. The contract was posted on August 17, 2026, and serves as a critical mechanism for securing the necessary official authorizations required for government operational standards.

Engineering Services

POSTED

about 21 hours ago

DEADLINE

Shipboard Industrial Support & Coordination ServicesThe Shipboard Industrial Support and Coordination Services subcontract, issued by the Department of Defense through the Mid Atlantic Reg Maintenance Ctr, focuses on providing on-site industrial labor and technical coordination in Norfolk. The primary objective is to integrate temporary access work with ongoing propulsion repairs to ensure that critical maintenance schedules remain undisturbed. This project falls under NAICS code 811411 and was posted on August 17, 2026. The scope of work emphasizes the seamless coordination of technical services to maintain operational efficiency during complex shipboard repairs.

Home and Garden Equipment Repair and Maintenance

POSTED

about 21 hours ago

DEADLINE

Mid-Atlantic Regional Maintenance Center (MARMC) Technical and Professional Services

Solicitation # N5005426R0006

This solicitation seeks technical and professional support services for the Mid-Atlantic Regional Maintenance Center in Norfolk, Virginia, under the Seaport-NxG Multiple Award Contract, with all bids restricted to service-disabled veteran-owned small businesses. The requirement is administered by the Department of Defense through the Mid Atlantic Reg Maintenance Ctr, with the solicitation number N5005426R0006 and a NAICS code of 541330 for scientific and technical consulting services. All responses must include the offeror’s active Seaport-NxG contract number, and submissions are governed by the full terms of the Seaport-NxG IDIQ contract, with only task order-specific clauses expanded in this document. The deadline for proposals is August 3, 2026, at 6:00 PM EST, following an amendment that extended the deadline for questions to July 17, 2026, and incorporated PIEE language. Attachments required for submission include the QASP, DD254, multiple CDRLs specifying status and end-of-task reporting, a staffing plan, past performance references, a price proposal, and the SF1408-14f form. Point of contact for inquiries includes Cindy T. Sampson and Jake Grady, both affiliated with the Navy. The place of performance is fixed in Norfolk, Virginia, and while the estimated contract value and detailed evaluation criteria are not available due to system limitations, the structure and documentation requirements indicate a rigorous oversight framework for contractor performance and deliverables.

Engineering Services

POSTED

DEADLINE

in about 9 hours

Onboard Industrial Support Labor (Mechanical & HVAC Technicians)This subcontract involves the provision of skilled mechanical and HVAC technicians to perform specialized industrial support labor for the Department of Defense. The primary scope of work consists of hands-on cooling coil replacement and integration services conducted onboard the USS CARTER HALL. The project is managed by the Mid Atlantic Regional Maintenance Center and will be performed in Norfolk, Virginia. Classified under NAICS code 238220, the contract focuses on ensuring the operational integrity of the vessel's cooling systems through expert technical labor.

Plumbing, Heating, and Air-Conditioning Contractors

POSTED

DEADLINE

Technical Compliance and Quality Assurance InspectionThis subcontract, titled Technical Compliance and Quality Assurance Inspection, is issued by the Mid Atlantic Reg Maintenance Ctr under the Department of Defense. The primary objective of the agreement is to provide independent inspection and verification of cooling coil installations to ensure they meet strict naval specifications and maintain operational functionality for critical systems. The work is categorized under NAICS code 541330 and will be performed in Norfolk, Virginia. Posted on August 11, 2026, the contract focuses on quality assurance and technical compliance to guarantee the reliability of essential naval infrastructure.

Engineering Services

POSTED

DEADLINE

Cooling Coil Replacement – Shipboard HVAC SystemsThis subcontract, issued by the Mid Atlantic Reg Maintenance Ctr under the Department of Defense, involves the replacement of four cooling coils within the fan room of the USS CARTER HALL. The primary objective of the project is to restore essential cooling capabilities for the vessel's navigation systems and ensure crew habitability. The scope of work encompasses the full lifecycle of the replacement process, including the removal of existing components, installation of new coils, system integration, and final testing. The project is categorized under NAICS code 333415 and will be performed in Norfolk, Virginia. Posted on August 11, 2026, this effort is critical for maintaining the operational readiness of the ship's HVAC systems.

Air-Conditioning and Warm Air Heating Equipment and Commercial and Industrial Refrigeration Equipment Manufacturing

POSTED

DEADLINE

Supply of Naval-Grade Lubricants and Insulation MaterialsThe contract entails the supply of naval-grade lubricants, insulation materials, and sealing compounds specifically approved for use in shipboard motor overhaul operations aboard U.S. Navy vessels, with all products required to meet stringent military performance standards. These materials are critical for maintaining the operational readiness and longevity of marine motors, ensuring they function reliably under extreme conditions encountered at sea. The procurement is scoped to support maintenance activities centered at the Mid Atlantic Regional Maintenance Center in Norfolk, Virginia, with the place of performance clearly designated to this key naval hub. As a subcontract under the Department of Defense, this agreement falls under NAICS code 325992, indicating it involves other chemical product and preparation manufacturing, aligning with specialty industrial formulations tailored for defense applications. The contract was posted on July 1, 2026, and is part of a broader effort to secure high-certification materials that comply with strict military specifications, ensuring consistency and safety across the fleet. While no set-aside details or point of contact are provided, the emphasis on military-grade compliance underscores a prioritization of quality, durability, and regulatory adherence over cost or vendor size.

Photographic Film, Paper, Plate, Chemical, and Copy Toner Manufacturing

POSTED

about 2 months ago

DEADLINE

Supply of Replacement Motor Components for Naval Fan OverhaulThe contract involves the supply of certified replacement motor components, including motor windings, bearings, and rotors, specifically for the repair and overhaul of shipboard fan motors in accordance with naval specifications. These parts must meet strict military-grade standards to ensure reliability and performance under the demanding conditions of naval operations. The work is scoped as a subcontract and is intended to support maintenance activities at the Mid Atlantic Regional Maintenance Center, with performance taking place in Norfolk, Virginia, at the ZIP code 23523. The North American Industry Classification System code 335311 indicates the procurement falls under the manufacturing of electric motors, generators, and transformers, emphasizing the technical precision required in production. All components must be certified to conform to naval requirements, ensuring compatibility, durability, and safety on board vessels.

Power, Distribution, and Specialty Transformer Manufacturing

POSTED

about 2 months ago

DEADLINE

Vaneaxial Fan Motor Overhaul – SONAR Control Room (CSER No. 1)The contract pertains to the comprehensive overhaul of a vaneaxial fan motor located in the SONAR Control Room aboard the USS FORREST SHERMAN (DDG 98), requiring full disassembly, detailed inspection, and repair or replacement of worn or defective components as necessary. Work must adhere strictly to U.S. Navy standards, encompassing reassembly of the unit, performance of rigorous operational testing, and formal certification to ensure the system meets all functional and safety requirements for military vessel operations. The overhaul is critical to maintaining environmental controls within the SONAR control room, directly supporting mission-critical sensor functionality and crew safety. This subcontract is managed by the Mid Atlantic Regional Maintenance Center under the Department of Defense, with performance scheduled to occur at a facility in Norfolk, Virginia, 23523. The work falls under NAICS code 811310, indicating it involves industrial machinery and equipment repair and maintenance services. Although no solicitation number or set-aside designation is provided, the contract is positioned as a subcontract, suggesting it may be issued through a prime contractor within the naval support supply chain. The posting date indicates the opportunity was made available in mid-2026, aligning with planned maintenance cycles for the vessel.

Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance

POSTED

about 2 months ago

DEADLINE

Technical Documentation and As-Built ReportingThe contract entails the preparation of comprehensive technical documentation required for Navy acceptance, including as-built drawings, repair logs, test results, and compliance reports, all aligned with specification items 541-22-004 and 541-22-002. This work is critical to ensuring that all systems and components meet official standards and are properly recorded for operational and regulatory purposes. The deliverables must reflect accurate, detailed, and timely records of all modifications, maintenance activities, and performance validations carried out during the project lifecycle. The contract is classified as a subcontract under NAICS code 541330, indicating it falls within engineering services, and is managed by the Mid Atlantic Regional Maintenance Center under the Department of Defense. Performance is primarily located in Norfolk, Virginia, with a ZIP code of 23523, and the work is expected to commence on July 1, 2026. While no solicitation number or set-aside details are provided, the focus remains on delivering high-fidelity documentation to support Navy compliance and readiness requirements.

Engineering Services

POSTED

about 2 months ago

DEADLINE

Specialty Machining and Fabrication SupportThe contract supports the precision machining and fabrication of critical replacement parts for fuel oil purifier overhauls, including bowls, discs, shafts, and housings, with a focus on restoring obsolete or damaged components to original specifications. This work ensures operational readiness of naval equipment by enabling the continued functionality of aging systems through exacting manufacturing standards. All work is to be performed at a primary location in Norfolk, Virginia, with the contract classified under NAICS code 332721 for metal forgings and stampings, indicating a specialized manufacturing scope requiring advanced capabilities. As a subcontract under the Department of Defense’s Mid Atlantic Reg Maintenance Center, the effort directly contributes to fleet maintenance and sustainment timelines, though specific award details and point of contact information are not provided. The solicitation was posted on July 1, 2026, and is intended for qualified contractors capable of delivering high-tolerance components essential to complex machinery restoration.

Precision Turned Product Manufacturing

POSTED

about 2 months ago

DEADLINE