Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Cooling Coil Replacement – Shipboard HVAC Systems

Active

Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract, issued by the Mid Atlantic Reg Maintenance Ctr under the Department of Defense, involves the replacement of four cooling coils within the fan room of the USS CARTER HALL. The primary objective of the project is to restore essential cooling capabilities for the vessel's navigation systems and ensure crew habitability. The scope of work encompasses the full lifecycle of the replacement process, including the removal of existing components, installation of new coils, system integration, and final testing. The project is categorized under NAICS code 333415 and will be performed in Norfolk, Virginia. Posted on August 11, 2026, this effort is critical for maintaining the operational readiness of the ship's HVAC systems.

General Info

DoD subcontract to replace four cooling coils on USS CARTER HALL in Norfolk.

Agency

Department Of Defense → Mid Atlantic Reg Maintenance CtrView Agency

NAICS

333415 - Air-Conditioning and Warm Air Heating Equipment and Commercial and Industrial Refrigeration Equipment ManufacturingView NAICS

Place of Performance

Norfolk, VA, 23511, USA

Set-Aside

NONE

Documents

This scope was carved out of N50054-26-123.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

J&A USS CARTER HALL EM RCC 4N

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedAug 11

subcontract

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → Mid Atlantic Reg Maintenance Ctr

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → Mid Atlantic Reg Maintenance Ctr

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Replacement of four cooling coils in the fan room of the USS CARTER HALL to restore cooling for navigation systems and crew habitability, including removal, installation, integration, and testing.

Similar Contracts

Same NAICS industry code

Commercial Refrigerator Supply and DeliveryThis subcontract is for the supply and delivery of one commercial-grade mechanical refrigerator intended for U.S. Coast Guard food service. The equipment must comply with NSN 4110014510159 and utilize approved refrigerants, specifically R134A or R404A, while the use of R290A is strictly prohibited. The opportunity is issued by the Department of Defense under the Subsistence FSE Supply Chain and is designated as a Total Small Business Set-Aside. Performance will take place in Sallisaw, Oklahoma. The solicitation was posted on August 17, 2026, with a response deadline of August 21, 2026.

SUBSISTENCE FSE SUPPLY CHAIN

POSTED

about 17 hours ago

DEADLINE

Small Business Prime Contractor (Integration & Compliance)This subcontract opportunity, posted on August 17, 2026, seeks a Small Business Prime Contractor to manage the end-to-end execution of manufacturing, compliance, packaging, labeling, and delivery. The contract is issued by the Department of Defense under the Land Supplier Opns Engines agency and is designated as a Total Small Business Set-Aside per FAR 19.5. The work falls under NAICS code 333415 and will be performed in Barstow, California. Interested parties must submit their responses by the deadline of August 28, 2026. The prime contractor will be responsible for ensuring all integration and compliance requirements are met throughout the production and delivery lifecycle. Further details and application instructions are available through the DIBBS portal.

LAND SUPPLIER OPNS ENGINES

POSTED

about 17 hours ago

DEADLINE

Manufacturing of Blower Drive UnitsThis subcontract opportunity with the Department of Defense, specifically under Land Supplier Opns Engines, involves the full manufacturing, assembly, and testing of Blower Drive units. All production must adhere to strict military specifications and National Stock Number 2930008669382. The work is categorized under NAICS code 333415 and will be performed in Barstow, California. The contract is designated as a Total Small Business Set-Aside under FAR 19.5. Interested parties must submit their responses by August 28, 2026, following the posting date of August 17, 2026. Further details and submission instructions are available through the DIBBS portal.

LAND SUPPLIER OPNS ENGINES

POSTED

about 17 hours ago

DEADLINE

SUPPORT, BLOWERDRIVE

Solicitation # SPE7L5-26-T-5032

This contract, solicitation number SPE7L5-26-T-5032, is for the procurement of blower drive supports used on Huber Model F1500M road graders. The requirement consists of three line items for a total quantity of 82 units under NSN 2930008669382, specifically referencing Rolls-Royce Solutions America Inc part number 5129168. The items are to be delivered to three separate DLA distribution centers located in Barstow, California; Albany, Georgia; and New Cumberland, Pennsylvania. The agreement specifies a delivery timeframe of 167 days, with an original required delivery date of October 5, 2026, and a need ship date of February 12, 2027. Shipping is designated as FOB Origin, with inspection and acceptance occurring at the destination. All supplies must adhere to DLA packaging requirements, including ASTM D3951 and MIL-STD-129 standards, and must comply with the DLA Master List of Technical and Quality Requirements. This is a total small business set-aside under NAICS code 333415.

LAND SUPPLIER OPNS ENGINES

POSTED

about 17 hours ago

DEADLINE

VALVE PLATE, COMPRES

Solicitation # SPE8E8-26-T-5181

This contract is a solicitation from the Defense Logistics Agency for the procurement of nine compressor valve plates, identified by NSN 4130016552664 and part number 5H46-1063. The requirement specifies a delivery timeline of five days after receipt of order, with a required delivery date of August 14, 2026. Shipping is set as FOB Origin, with both inspection and acceptance occurring at the destination. The items must be packaged according to ASTM D3951 and MIL-STD-129, adhering to DLA packaging requirements RP001. Delivery is directed to the SWRMC MAC-MO facilities in San Diego and National City, California, with a strict instruction to use the fastest traceable means and avoid parcel post. The contract is governed by the DLA Master List of Technical and Quality Requirements and includes provisions for the removal of government identification from non-accepted supplies.

Defense Logistics Agency

POSTED

about 17 hours ago

DEADLINE

Supply of Ecoflo Blower Systems (Supply and Vent)This subcontract, managed by the Department of Veterans Affairs under Rpo East, involves the procurement of Ecoflo-branded supply and vent blowers operating at 115V. These components are specifically intended for integration with existing IVC rack systems, falling under the NAICS code 333415 for industrial ventilation equipment. The opportunity was posted on August 17, 2026, with a response deadline of August 20, 2026. Interested parties can find further details and submission guidelines through the provided government workspace link.

Rpo East (36C24E)

POSTED

about 22 hours ago

DEADLINE

CHILLER PARTS - FORT BRAGG

Solicitation # W911S226U4120

This contract, solicitation number W911S226U4120, is for the procurement of chiller parts including motors, contactors, sensors, and flow switches for Fort Bragg. Issued by the Department of Defense through the W6QM Micc-Ft Drum office, the requirement is designated as a total small business set-aside under NAICS code 333415. The solicitation was posted on August 17, 2026, with a response deadline of August 24, 2026. Performance will take place in the 28308 zip code area, and the primary point of contact for this opportunity is Deanna Orona.

W6QM Micc-Ft Drum

POSTED

about 22 hours ago

DEADLINE

Manufacture and Supply of Duct-Type Air Cooling CoilThis subcontract involves the full manufacturing, testing, packaging, and delivery of a duct-type air cooling coil for the Department of Defense, specifically for the DDSP New Cumberland Facility. The equipment must adhere to military specifications and NSN 4130-01-399-8135, while maintaining strict compliance with DLA quality, marking, and hazardous material standards. The project falls under NAICS code 333415 and is to be performed in New Cumberland, Pennsylvania. The solicitation was posted on August 16, 2026, with a response deadline of August 27, 2026.

DDSP NEW CUMBERLAND FACILITY

POSTED

DEADLINE

Manufacture and Supply of Air Conditioning Filter ElementsThis subcontract involves the manufacture, packaging, labeling, and delivery of eight military-spec air conditioning filter elements under NSN 4130015165689 for the Defense Logistics Agency within the Department of Defense. The contractor must ensure all units are fully compliant with DLA, MIL-STD-129, and MIL-STD-2073-1E standards. Performance of the contract will take place in Silverdale, Washington. The opportunity is designated as a Total Small Business Set-Aside under FAR 19.5, falling under NAICS code 333415. The solicitation was posted on August 16, 2026, with a response deadline of August 27, 2026.

Defense Logistics Agency

POSTED

DEADLINE

COOLING COIL, AIR, DUCT

Solicitation # SPE8E8-26-T-5176

This contract is for the procurement of five duct type air cooling coils, identified by NSN 4130-01-224-6431. The items are designated as critical application items and must adhere to specific part numbers from Engineered Coil Company. The agreement specifies a delivery timeframe of 157 days, with a required delivery date of March 15, 2027, shipping FOB Origin to the DLA Distribution New Cumberland facility in Pennsylvania. The supplier must comply with strict technical and quality requirements, including DLA packaging standards, MIL-STD-129 marking, and MIL-STD-2073-1E packaging data. There is a strict prohibition against the intentional addition of mercury or mercury-containing compounds, except for specific functional exceptions. The contract also mandates adherence to source approval request documentation and the removal of government identification from any non-accepted supplies.

DDSP NEW CUMBERLAND FACILITY

POSTED

DEADLINE

CONDENSER, REFRIGERA

Solicitation # SPE8E8-26-T-5172

This contract, identified as SPE8E8-26-T-5172, is a solicitation by the Defense Logistics Agency for the procurement of five refrigeration condensers. The items are specified as Carrier Corp part number 50BW500-424 under NSN 4130012900526. Delivery is required within 20 days after receipt of order, with the final destination being the USS Frank Cable. The agreement mandates strict adherence to DLA packaging requirements and MIL-STD-129 marking standards. It includes specific environmental restrictions prohibiting the intentional addition of mercury or ozone-depleting substances, except for approved functional components. The contract is designated as a critical application item and requires compliance with covered defense information protocols.

Defense Logistics Agency

POSTED

DEADLINE

FILTER ELEMENT, AIR

Solicitation # SPE8E8-26-T-5177

This contract is a solicitation issued by the Defense Logistics Agency for the procurement of eight air conditioning filter elements under NSN 4130-01-516-5689. The requirement specifies critical application items compatible with Parker-Hannifin Corporation or Foxtronix Inc part number 63-00761. Delivery is required within 20 days, with the shipping destination being the Naval Intermediate Maintenance Facility Pacific Northwest Seawolf in Silverdale, Washington. The agreement mandates strict adherence to DLA packaging requirements, MIL-STD-2073-1E for delivery preparation, and MIL-STD-129 for marking. A key environmental restriction prohibits the intentional addition of mercury or mercury-containing compounds, except for specific functional components approved by NAVSEA. The contract is designated as a total small business set-aside under NAICS code 333415, with inspection and acceptance occurring at the destination.

Defense Logistics Agency

POSTED

DEADLINE

More opportunities from Department Of Defense → Mid Atlantic Reg Maintenance Ctr

Same awarding agency

Mission-Critical Repair Integration & SchedulingThe Mission-Critical Repair Integration and Scheduling subcontract, issued by the Mid Atlantic Reg Maintenance Ctr under the Department of Defense, focuses on the coordination of temporary access work with Key Event Work Complete milestones. The primary objective is to ensure that these activities are aligned to prevent any interference or negative impact on urgent propulsion system repairs. This project is categorized under NAICS code 541611 and is designated for performance in Norfolk, Virginia. The contract emphasizes the critical nature of propulsion system maintenance and requires precise scheduling to maintain operational efficiency during high-priority repair cycles.

Administrative Management and General Management Consulting Services

POSTED

about 22 hours ago

DEADLINE

Technical Certification & Compliance VerificationThe Technical Certification and Compliance Verification subcontract, issued by the Department of Defense through the Mid Atlantic Reg Maintenance Ctr, focuses on the execution and documentation of technical certifications necessary for government approval. The scope of work requires the performance of certifications that must be validated by a technical authority, legal counsel, and a contracting officer to ensure full regulatory compliance. This project is categorized under NAICS code 541330 and is scheduled for performance in Norfolk, Virginia. The contract was posted on August 17, 2026, and serves as a critical mechanism for securing the necessary official authorizations required for government operational standards.

Engineering Services

POSTED

about 22 hours ago

DEADLINE

Shipboard Industrial Support & Coordination ServicesThe Shipboard Industrial Support and Coordination Services subcontract, issued by the Department of Defense through the Mid Atlantic Reg Maintenance Ctr, focuses on providing on-site industrial labor and technical coordination in Norfolk. The primary objective is to integrate temporary access work with ongoing propulsion repairs to ensure that critical maintenance schedules remain undisturbed. This project falls under NAICS code 811411 and was posted on August 17, 2026. The scope of work emphasizes the seamless coordination of technical services to maintain operational efficiency during complex shipboard repairs.

Home and Garden Equipment Repair and Maintenance

POSTED

about 22 hours ago

DEADLINE

Temporary Access Point Fabrication & Installation (Machinery Room Entry)This subcontract involves the design, fabrication, installation, and eventual removal of a temporary metal access hatch in the Main Machinery Room of the USS FORT LAUDERDALE. The primary objective of this project is to provide necessary access for critical fuel header pipe repairs. The work is managed by the Mid Atlantic Reg Maintenance Ctr under the Department of Defense and will be performed in Norfolk, Virginia. The project falls under NAICS code 332322 and was posted on August 17, 2026.

Sheet Metal Work Manufacturing

POSTED

about 22 hours ago

DEADLINE

Mid-Atlantic Regional Maintenance Center (MARMC) Technical and Professional Services

Solicitation # N5005426R0006

This solicitation seeks technical and professional support services for the Mid-Atlantic Regional Maintenance Center in Norfolk, Virginia, under the Seaport-NxG Multiple Award Contract, with all bids restricted to service-disabled veteran-owned small businesses. The requirement is administered by the Department of Defense through the Mid Atlantic Reg Maintenance Ctr, with the solicitation number N5005426R0006 and a NAICS code of 541330 for scientific and technical consulting services. All responses must include the offeror’s active Seaport-NxG contract number, and submissions are governed by the full terms of the Seaport-NxG IDIQ contract, with only task order-specific clauses expanded in this document. The deadline for proposals is August 3, 2026, at 6:00 PM EST, following an amendment that extended the deadline for questions to July 17, 2026, and incorporated PIEE language. Attachments required for submission include the QASP, DD254, multiple CDRLs specifying status and end-of-task reporting, a staffing plan, past performance references, a price proposal, and the SF1408-14f form. Point of contact for inquiries includes Cindy T. Sampson and Jake Grady, both affiliated with the Navy. The place of performance is fixed in Norfolk, Virginia, and while the estimated contract value and detailed evaluation criteria are not available due to system limitations, the structure and documentation requirements indicate a rigorous oversight framework for contractor performance and deliverables.

Engineering Services

POSTED

DEADLINE

in about 8 hours

Onboard Industrial Support Labor (Mechanical & HVAC Technicians)This subcontract involves the provision of skilled mechanical and HVAC technicians to perform specialized industrial support labor for the Department of Defense. The primary scope of work consists of hands-on cooling coil replacement and integration services conducted onboard the USS CARTER HALL. The project is managed by the Mid Atlantic Regional Maintenance Center and will be performed in Norfolk, Virginia. Classified under NAICS code 238220, the contract focuses on ensuring the operational integrity of the vessel's cooling systems through expert technical labor.

Plumbing, Heating, and Air-Conditioning Contractors

POSTED

DEADLINE

Technical Compliance and Quality Assurance InspectionThis subcontract, titled Technical Compliance and Quality Assurance Inspection, is issued by the Mid Atlantic Reg Maintenance Ctr under the Department of Defense. The primary objective of the agreement is to provide independent inspection and verification of cooling coil installations to ensure they meet strict naval specifications and maintain operational functionality for critical systems. The work is categorized under NAICS code 541330 and will be performed in Norfolk, Virginia. Posted on August 11, 2026, the contract focuses on quality assurance and technical compliance to guarantee the reliability of essential naval infrastructure.

Engineering Services

POSTED

DEADLINE

Supply of Naval-Grade Lubricants and Insulation MaterialsThe contract entails the supply of naval-grade lubricants, insulation materials, and sealing compounds specifically approved for use in shipboard motor overhaul operations aboard U.S. Navy vessels, with all products required to meet stringent military performance standards. These materials are critical for maintaining the operational readiness and longevity of marine motors, ensuring they function reliably under extreme conditions encountered at sea. The procurement is scoped to support maintenance activities centered at the Mid Atlantic Regional Maintenance Center in Norfolk, Virginia, with the place of performance clearly designated to this key naval hub. As a subcontract under the Department of Defense, this agreement falls under NAICS code 325992, indicating it involves other chemical product and preparation manufacturing, aligning with specialty industrial formulations tailored for defense applications. The contract was posted on July 1, 2026, and is part of a broader effort to secure high-certification materials that comply with strict military specifications, ensuring consistency and safety across the fleet. While no set-aside details or point of contact are provided, the emphasis on military-grade compliance underscores a prioritization of quality, durability, and regulatory adherence over cost or vendor size.

Photographic Film, Paper, Plate, Chemical, and Copy Toner Manufacturing

POSTED

about 2 months ago

DEADLINE

Supply of Replacement Motor Components for Naval Fan OverhaulThe contract involves the supply of certified replacement motor components, including motor windings, bearings, and rotors, specifically for the repair and overhaul of shipboard fan motors in accordance with naval specifications. These parts must meet strict military-grade standards to ensure reliability and performance under the demanding conditions of naval operations. The work is scoped as a subcontract and is intended to support maintenance activities at the Mid Atlantic Regional Maintenance Center, with performance taking place in Norfolk, Virginia, at the ZIP code 23523. The North American Industry Classification System code 335311 indicates the procurement falls under the manufacturing of electric motors, generators, and transformers, emphasizing the technical precision required in production. All components must be certified to conform to naval requirements, ensuring compatibility, durability, and safety on board vessels.

Power, Distribution, and Specialty Transformer Manufacturing

POSTED

about 2 months ago

DEADLINE

Vaneaxial Fan Motor Overhaul – SONAR Control Room (CSER No. 1)The contract pertains to the comprehensive overhaul of a vaneaxial fan motor located in the SONAR Control Room aboard the USS FORREST SHERMAN (DDG 98), requiring full disassembly, detailed inspection, and repair or replacement of worn or defective components as necessary. Work must adhere strictly to U.S. Navy standards, encompassing reassembly of the unit, performance of rigorous operational testing, and formal certification to ensure the system meets all functional and safety requirements for military vessel operations. The overhaul is critical to maintaining environmental controls within the SONAR control room, directly supporting mission-critical sensor functionality and crew safety. This subcontract is managed by the Mid Atlantic Regional Maintenance Center under the Department of Defense, with performance scheduled to occur at a facility in Norfolk, Virginia, 23523. The work falls under NAICS code 811310, indicating it involves industrial machinery and equipment repair and maintenance services. Although no solicitation number or set-aside designation is provided, the contract is positioned as a subcontract, suggesting it may be issued through a prime contractor within the naval support supply chain. The posting date indicates the opportunity was made available in mid-2026, aligning with planned maintenance cycles for the vessel.

Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance

POSTED

about 2 months ago

DEADLINE

Technical Documentation and As-Built ReportingThe contract entails the preparation of comprehensive technical documentation required for Navy acceptance, including as-built drawings, repair logs, test results, and compliance reports, all aligned with specification items 541-22-004 and 541-22-002. This work is critical to ensuring that all systems and components meet official standards and are properly recorded for operational and regulatory purposes. The deliverables must reflect accurate, detailed, and timely records of all modifications, maintenance activities, and performance validations carried out during the project lifecycle. The contract is classified as a subcontract under NAICS code 541330, indicating it falls within engineering services, and is managed by the Mid Atlantic Regional Maintenance Center under the Department of Defense. Performance is primarily located in Norfolk, Virginia, with a ZIP code of 23523, and the work is expected to commence on July 1, 2026. While no solicitation number or set-aside details are provided, the focus remains on delivering high-fidelity documentation to support Navy compliance and readiness requirements.

Engineering Services

POSTED

about 2 months ago

DEADLINE

Specialty Machining and Fabrication SupportThe contract supports the precision machining and fabrication of critical replacement parts for fuel oil purifier overhauls, including bowls, discs, shafts, and housings, with a focus on restoring obsolete or damaged components to original specifications. This work ensures operational readiness of naval equipment by enabling the continued functionality of aging systems through exacting manufacturing standards. All work is to be performed at a primary location in Norfolk, Virginia, with the contract classified under NAICS code 332721 for metal forgings and stampings, indicating a specialized manufacturing scope requiring advanced capabilities. As a subcontract under the Department of Defense’s Mid Atlantic Reg Maintenance Center, the effort directly contributes to fleet maintenance and sustainment timelines, though specific award details and point of contact information are not provided. The solicitation was posted on July 1, 2026, and is intended for qualified contractors capable of delivering high-tolerance components essential to complex machinery restoration.

Precision Turned Product Manufacturing

POSTED

about 2 months ago

DEADLINE