Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Onboard Industrial Support Labor (Mechanical & HVAC Technicians)

Active

Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract involves the provision of skilled mechanical and HVAC technicians to perform specialized industrial support labor for the Department of Defense. The primary scope of work consists of hands-on cooling coil replacement and integration services conducted onboard the USS CARTER HALL. The project is managed by the Mid Atlantic Regional Maintenance Center and will be performed in Norfolk, Virginia. Classified under NAICS code 238220, the contract focuses on ensuring the operational integrity of the vessel's cooling systems through expert technical labor.

General Info

Mechanical and HVAC technicians providing cooling coil replacement for USS CARTER HALL in Norfolk.

Agency

Department Of Defense → Mid Atlantic Reg Maintenance CtrView Agency

NAICS

238220 - Plumbing, Heating, and Air-Conditioning ContractorsView NAICS

Place of Performance

Norfolk, VA, 23511, USA

Set-Aside

NONE

Documents

This scope was carved out of N50054-26-123.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

J&A USS CARTER HALL EM RCC 4N

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedAug 11

subcontract

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → Mid Atlantic Reg Maintenance Ctr

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → Mid Atlantic Reg Maintenance Ctr

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Provision of skilled HVAC and mechanical technicians to perform hands-on cooling coil replacement and integration onboard the USS CARTER HALL at MARMC, Norfolk.

Similar Contracts

Same NAICS industry code

Plumbing and Piping Systems InstallationThe Plumbing and Piping Systems Installation subcontract, issued by the ASC Commodities Division of the Department of Defense, involves the installation of water supply, storm, and sanitary piping systems, as well as the associated drainage and fixtures. This project is categorized under NAICS code 238220 and will be performed at Tinker AFB, zip code 73145-8000. The solicitation was posted on August 17, 2026, with a response deadline of August 25, 2026. Interested parties can find further details and submission requirements through the provided DIBBS link.

ASC COMMODITIES DIVISION

POSTED

about 17 hours ago

DEADLINE

Backflow Prevention Assembly Testing and MaintenanceThis subcontract opportunity with the Texas Health and Human Services Commission involves the annual inspection, testing, and maintenance of backflow prevention assemblies. The primary objective is to ensure all assemblies remain in compliance with 30 TAC §290.44(h) and established public health standards. The project falls under NAICS code 238220 and was posted on August 17, 2026. Interested parties must submit their responses by the deadline of September 8, 2026, at 4:30 PM. Further details and submission guidelines can be accessed through the Texas SmartBuy portal.

Health and Human Services Commission

POSTED

about 17 hours ago

DEADLINE

Routine and Emergency Irrigation System RepairsThe Health and Human Services Commission of Texas is seeking a subcontractor for routine and emergency irrigation system repairs. The scope of work includes performing preventive maintenance, system diagnostics, component replacements, and leak repairs, with a strict requirement for a four-hour response time for emergency calls. This opportunity is listed under NAICS code 238220 and was posted on August 17, 2026. Interested parties must submit their responses by the deadline of September 8, 2026, at 4:30 PM. Further details can be found through the Texas SmartBuy portal.

Health and Human Services Commission

POSTED

about 17 hours ago

DEADLINE

HVAC Compressor Replacement – Mechanical InstallationThis subcontract opportunity with the San Diego Job Corps Center involves the full replacement of a failed rooftop HVAC compressor unit at Building 181. The scope of work includes the removal of the old unit, installation of the new compressor, professional refrigerant handling, electrical reconnection, and comprehensive performance testing to ensure operational efficiency. The project is categorized under NAICS code 238220 and is designated as a small business set-aside, open to SDB, WOSB, HUBZone, VOSB, and SDVOSB certified entities. The solicitation was posted on August 17, 2026, with a response deadline of September 11, 2026.

San Diego Job Corps Center

POSTED

about 18 hours ago

DEADLINE

Dry Fire Sprinkler System Trip TestingThis subcontract opportunity with the Earle C. Clements Job Corps Center involves conducting trip testing on six dry fire sprinkler systems. The scope of work includes testing dry pipe valves and alarm mechanisms under low-temperature conditions in accordance with NFPA 25 standards. The project is categorized under NAICS code 238220 and is set aside for various small business designations, including Small Disadvantaged, Women-Owned, HUBZone, and Veteran-Owned small businesses. The solicitation was posted on August 17, 2026, with a response deadline of September 9, 2026.

Earle C. Clements Job Corps Center

POSTED

about 18 hours ago

DEADLINE

Wet Fire Sprinkler System Inspection and TestingThis subcontract opportunity with the Earle C. Clements Job Corps Center involves the inspection and testing of approximately 18 wet fire sprinkler systems. The scope of work includes performing riser valve testing and conducting visual checks to ensure full compliance with NFPA 25 standards. The project is designated as a set-aside for various small business categories, including Small Disadvantaged Businesses, Women-Owned Small Businesses, HUBZone, and Veteran-Owned Small Businesses. Interested parties must submit their responses by September 9, 2026, under NAICS code 238220.

Earle C. Clements Job Corps Center

POSTED

about 18 hours ago

DEADLINE

HVAC System Replacement InstallationThe HVAC System Replacement Installation subcontract for the San Diego Job Corps Center involves the full removal and replacement of existing HVAC systems. The scope of work includes the installation of new units, ductwork, and controls, as well as comprehensive testing. The selected contractor is responsible for providing all necessary labor, materials, and equipment while ensuring full compliance with federal labor and safety standards. This opportunity is designated as an SBA set-aside, open to various small business categories including Small Disadvantaged, Women-Owned, HUBZone, and Veteran-Owned small businesses. The project falls under NAICS code 238220. Interested parties must submit their responses by the deadline of September 11, 2026.

San Diego Job Corps Center

POSTED

about 18 hours ago

DEADLINE

CBP5933 Bldg. 225 HVAC Replacement

Solicitation # cbp5933-bldg-225-hvac-replacement

Management & Training Corporation is seeking bids for a subcontracting opportunity to provide HVAC replacement services for Building 225 at the San Diego Job Corps Center located in Imperial Beach, California. This solicitation is open to various small business designations, including Small Disadvantaged, Women-Owned, HUBZone, and Veteran-Owned small businesses. Interested parties must submit their responses by September 11, 2026. The project falls under NAICS code 238220, and the primary point of contact for this requirement is Tom Williams.

San Diego Job Corps Center

POSTED

about 18 hours ago

DEADLINE

Sprinkler System Inspection 2026

Solicitation # sprinkler-system-inspection-2026

The Earle C. Clements Job Corps Center in Kentucky is seeking a contractor for the Sprinkler System Inspection 2026 project. The selected vendor will provide all necessary labor and materials to inspect and test 24 sprinkler systems, consisting of approximately 18 wet systems and 6 dry systems. These services will be performed across multiple locations, including various numbered buildings, the Student Union, Maintenance Office, Cold Storage, Logistics, Transportation, and the Jackie Robison Building. This solicitation is set aside for small businesses, including those that are disadvantaged, women-owned, HUBZone certified, or veteran-owned. Interested parties must submit their responses by September 9, 2026. The project falls under NAICS code 238220 and is managed by primary point of contact Angie Mahoeny.

Earle C. Clements Job Corps Center

POSTED

about 18 hours ago

DEADLINE

RFQ7519 Backflow Preventor Repair Services

Solicitation # 7519

Management & Training Corporation (MTC) is seeking bids for a fee-for-service subcontracting opportunity to provide plumbing services at the Sierra Nevada Job Corps Center in Reno, Nevada. The scope of work involves the repair of three backflow preventers, specifically fixing two failed units and one leaking unit. Tasks include stopping water flow, installing necessary repair parts, restoring and testing the devices, and notifying the local Authority Having Jurisdiction. The equipment includes two 6-inch Ames model 3000SS units and one 4-inch Wilkins model 375A. This solicitation is open to various small business categories, including SDB, WOSB, HUBZone, and SDVOSB, under NAICS code 238220. Bids must be submitted via email to Tom Williams by August 25, 2026, at 3:00 PM PST, and must include a bid sheet, a completed supplier packet (W-9, self-certification, and acceptance of terms), and proof of insurance. Award will be based on best value. Contractors must maintain specific insurance limits, including $1 million per occurrence for general liability and $500,000 for worker's compensation, and must adhere to DBA or SCA prevailing wage requirements. The contract incorporates numerous FAR clauses regarding security, privacy, and federal ethics standards.

Sierra Nevada Job Corps Center

POSTED

about 18 hours ago

DEADLINE

Boiler and Mini-Split

Solicitation # boiler-mini-split-0

The Grafton Job Corps Center is soliciting a single lump sum subcontract for HVAC replacements in Massachusetts, specifically the installation of two 3-ton high-efficiency R-32 mini-split air conditioning units in the Building 17 server room and the installation of Weil-McLain Series 2 condensing hot water boilers in Building 7. The boiler installation requires specific components including a 10 inch combustion air intake, 8 inch exhaust vent, and a 30 percent glycol mixture. All work must comply with EPA, OSHA, and Massachusetts state and local codes, with the contractor providing a one-year workmanship guarantee and specific warranties for the boiler heat exchanger and parts. The solicitation is set aside for various small business categories and requires a mandatory pre-bid site walk-through for eligibility. Proposals are due by August 26, 2026, and will be evaluated based on best value, with weights assigned to price (60 percent), quality (20 percent), past performance (10 percent), and schedule (10 percent). Awardees must maintain comprehensive insurance coverage, including general liability of at least 1 million dollars per occurrence, and adhere to Davis-Bacon Act prevailing wage standards. Final payment is subject to Net 30 terms and requires the submission of certified payroll records, a completed SF 1413, and a release of liens from all subcontractors.

Grafton Job Corps

POSTED

about 18 hours ago

DEADLINE

AC Compressor Replacements for Gym, Academic and Kitchen Area

Solicitation # ac-compressor-replacements-gym-academic-kitchen-area

The Miami Job Corps Center is soliciting bids for the replacement of damaged AC compressors (AHU-E3 and AHU-E5) serving the gym, academic, and kitchen areas in Miami Gardens, Florida. This set-aside opportunity is open to various small business categories, including SDB, WOSB, HUBZone, VOSB, and SDVOSB. The project requires the contractor to remove and replace specified compressors while adhering to ENERGY STAR criteria, state and local building codes, and Davis-Bacon Act wage determinations. Work must be coordinated to avoid disrupting center operations, with a mandatory pre-bid site walk-through required for eligibility. The contractor must commence work within 14 days of the Notice to Proceed and provide a one-year workmanship warranty. Award will be determined on a best-value trade-off basis, evaluating price (60%), quality (20%), past performance (10%), and schedule (10%). Proposals must be submitted electronically to Fernande Frederic by September 3, 2026, and must include a lump sum cost with a detailed breakdown, a sequenced construction schedule, a Florida contractor's license, and required insurance certificates. Contractors are subject to strict site security regulations, including a prohibition on fraternization with students and a requirement to restore all work areas to their original condition. Final acceptance is contingent upon a successful on-site inspection, the resolution of a punch list, and the submission of certified payroll records and operation manuals.

Miami Job Corps Center

POSTED

about 18 hours ago

DEADLINE

More opportunities from Department Of Defense → Mid Atlantic Reg Maintenance Ctr

Same awarding agency

Mission-Critical Repair Integration & SchedulingThe Mission-Critical Repair Integration and Scheduling subcontract, issued by the Mid Atlantic Reg Maintenance Ctr under the Department of Defense, focuses on the coordination of temporary access work with Key Event Work Complete milestones. The primary objective is to ensure that these activities are aligned to prevent any interference or negative impact on urgent propulsion system repairs. This project is categorized under NAICS code 541611 and is designated for performance in Norfolk, Virginia. The contract emphasizes the critical nature of propulsion system maintenance and requires precise scheduling to maintain operational efficiency during high-priority repair cycles.

Administrative Management and General Management Consulting Services

POSTED

about 22 hours ago

DEADLINE

Technical Certification & Compliance VerificationThe Technical Certification and Compliance Verification subcontract, issued by the Department of Defense through the Mid Atlantic Reg Maintenance Ctr, focuses on the execution and documentation of technical certifications necessary for government approval. The scope of work requires the performance of certifications that must be validated by a technical authority, legal counsel, and a contracting officer to ensure full regulatory compliance. This project is categorized under NAICS code 541330 and is scheduled for performance in Norfolk, Virginia. The contract was posted on August 17, 2026, and serves as a critical mechanism for securing the necessary official authorizations required for government operational standards.

Engineering Services

POSTED

about 22 hours ago

DEADLINE

Shipboard Industrial Support & Coordination ServicesThe Shipboard Industrial Support and Coordination Services subcontract, issued by the Department of Defense through the Mid Atlantic Reg Maintenance Ctr, focuses on providing on-site industrial labor and technical coordination in Norfolk. The primary objective is to integrate temporary access work with ongoing propulsion repairs to ensure that critical maintenance schedules remain undisturbed. This project falls under NAICS code 811411 and was posted on August 17, 2026. The scope of work emphasizes the seamless coordination of technical services to maintain operational efficiency during complex shipboard repairs.

Home and Garden Equipment Repair and Maintenance

POSTED

about 22 hours ago

DEADLINE

Temporary Access Point Fabrication & Installation (Machinery Room Entry)This subcontract involves the design, fabrication, installation, and eventual removal of a temporary metal access hatch in the Main Machinery Room of the USS FORT LAUDERDALE. The primary objective of this project is to provide necessary access for critical fuel header pipe repairs. The work is managed by the Mid Atlantic Reg Maintenance Ctr under the Department of Defense and will be performed in Norfolk, Virginia. The project falls under NAICS code 332322 and was posted on August 17, 2026.

Sheet Metal Work Manufacturing

POSTED

about 22 hours ago

DEADLINE

Mid-Atlantic Regional Maintenance Center (MARMC) Technical and Professional Services

Solicitation # N5005426R0006

This solicitation seeks technical and professional support services for the Mid-Atlantic Regional Maintenance Center in Norfolk, Virginia, under the Seaport-NxG Multiple Award Contract, with all bids restricted to service-disabled veteran-owned small businesses. The requirement is administered by the Department of Defense through the Mid Atlantic Reg Maintenance Ctr, with the solicitation number N5005426R0006 and a NAICS code of 541330 for scientific and technical consulting services. All responses must include the offeror’s active Seaport-NxG contract number, and submissions are governed by the full terms of the Seaport-NxG IDIQ contract, with only task order-specific clauses expanded in this document. The deadline for proposals is August 3, 2026, at 6:00 PM EST, following an amendment that extended the deadline for questions to July 17, 2026, and incorporated PIEE language. Attachments required for submission include the QASP, DD254, multiple CDRLs specifying status and end-of-task reporting, a staffing plan, past performance references, a price proposal, and the SF1408-14f form. Point of contact for inquiries includes Cindy T. Sampson and Jake Grady, both affiliated with the Navy. The place of performance is fixed in Norfolk, Virginia, and while the estimated contract value and detailed evaluation criteria are not available due to system limitations, the structure and documentation requirements indicate a rigorous oversight framework for contractor performance and deliverables.

Engineering Services

POSTED

DEADLINE

in about 8 hours

Technical Compliance and Quality Assurance InspectionThis subcontract, titled Technical Compliance and Quality Assurance Inspection, is issued by the Mid Atlantic Reg Maintenance Ctr under the Department of Defense. The primary objective of the agreement is to provide independent inspection and verification of cooling coil installations to ensure they meet strict naval specifications and maintain operational functionality for critical systems. The work is categorized under NAICS code 541330 and will be performed in Norfolk, Virginia. Posted on August 11, 2026, the contract focuses on quality assurance and technical compliance to guarantee the reliability of essential naval infrastructure.

Engineering Services

POSTED

DEADLINE

Cooling Coil Replacement – Shipboard HVAC SystemsThis subcontract, issued by the Mid Atlantic Reg Maintenance Ctr under the Department of Defense, involves the replacement of four cooling coils within the fan room of the USS CARTER HALL. The primary objective of the project is to restore essential cooling capabilities for the vessel's navigation systems and ensure crew habitability. The scope of work encompasses the full lifecycle of the replacement process, including the removal of existing components, installation of new coils, system integration, and final testing. The project is categorized under NAICS code 333415 and will be performed in Norfolk, Virginia. Posted on August 11, 2026, this effort is critical for maintaining the operational readiness of the ship's HVAC systems.

Air-Conditioning and Warm Air Heating Equipment and Commercial and Industrial Refrigeration Equipment Manufacturing

POSTED

DEADLINE

Supply of Naval-Grade Lubricants and Insulation MaterialsThe contract entails the supply of naval-grade lubricants, insulation materials, and sealing compounds specifically approved for use in shipboard motor overhaul operations aboard U.S. Navy vessels, with all products required to meet stringent military performance standards. These materials are critical for maintaining the operational readiness and longevity of marine motors, ensuring they function reliably under extreme conditions encountered at sea. The procurement is scoped to support maintenance activities centered at the Mid Atlantic Regional Maintenance Center in Norfolk, Virginia, with the place of performance clearly designated to this key naval hub. As a subcontract under the Department of Defense, this agreement falls under NAICS code 325992, indicating it involves other chemical product and preparation manufacturing, aligning with specialty industrial formulations tailored for defense applications. The contract was posted on July 1, 2026, and is part of a broader effort to secure high-certification materials that comply with strict military specifications, ensuring consistency and safety across the fleet. While no set-aside details or point of contact are provided, the emphasis on military-grade compliance underscores a prioritization of quality, durability, and regulatory adherence over cost or vendor size.

Photographic Film, Paper, Plate, Chemical, and Copy Toner Manufacturing

POSTED

about 2 months ago

DEADLINE

Supply of Replacement Motor Components for Naval Fan OverhaulThe contract involves the supply of certified replacement motor components, including motor windings, bearings, and rotors, specifically for the repair and overhaul of shipboard fan motors in accordance with naval specifications. These parts must meet strict military-grade standards to ensure reliability and performance under the demanding conditions of naval operations. The work is scoped as a subcontract and is intended to support maintenance activities at the Mid Atlantic Regional Maintenance Center, with performance taking place in Norfolk, Virginia, at the ZIP code 23523. The North American Industry Classification System code 335311 indicates the procurement falls under the manufacturing of electric motors, generators, and transformers, emphasizing the technical precision required in production. All components must be certified to conform to naval requirements, ensuring compatibility, durability, and safety on board vessels.

Power, Distribution, and Specialty Transformer Manufacturing

POSTED

about 2 months ago

DEADLINE

Vaneaxial Fan Motor Overhaul – SONAR Control Room (CSER No. 1)The contract pertains to the comprehensive overhaul of a vaneaxial fan motor located in the SONAR Control Room aboard the USS FORREST SHERMAN (DDG 98), requiring full disassembly, detailed inspection, and repair or replacement of worn or defective components as necessary. Work must adhere strictly to U.S. Navy standards, encompassing reassembly of the unit, performance of rigorous operational testing, and formal certification to ensure the system meets all functional and safety requirements for military vessel operations. The overhaul is critical to maintaining environmental controls within the SONAR control room, directly supporting mission-critical sensor functionality and crew safety. This subcontract is managed by the Mid Atlantic Regional Maintenance Center under the Department of Defense, with performance scheduled to occur at a facility in Norfolk, Virginia, 23523. The work falls under NAICS code 811310, indicating it involves industrial machinery and equipment repair and maintenance services. Although no solicitation number or set-aside designation is provided, the contract is positioned as a subcontract, suggesting it may be issued through a prime contractor within the naval support supply chain. The posting date indicates the opportunity was made available in mid-2026, aligning with planned maintenance cycles for the vessel.

Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance

POSTED

about 2 months ago

DEADLINE

Technical Documentation and As-Built ReportingThe contract entails the preparation of comprehensive technical documentation required for Navy acceptance, including as-built drawings, repair logs, test results, and compliance reports, all aligned with specification items 541-22-004 and 541-22-002. This work is critical to ensuring that all systems and components meet official standards and are properly recorded for operational and regulatory purposes. The deliverables must reflect accurate, detailed, and timely records of all modifications, maintenance activities, and performance validations carried out during the project lifecycle. The contract is classified as a subcontract under NAICS code 541330, indicating it falls within engineering services, and is managed by the Mid Atlantic Regional Maintenance Center under the Department of Defense. Performance is primarily located in Norfolk, Virginia, with a ZIP code of 23523, and the work is expected to commence on July 1, 2026. While no solicitation number or set-aside details are provided, the focus remains on delivering high-fidelity documentation to support Navy compliance and readiness requirements.

Engineering Services

POSTED

about 2 months ago

DEADLINE

Specialty Machining and Fabrication SupportThe contract supports the precision machining and fabrication of critical replacement parts for fuel oil purifier overhauls, including bowls, discs, shafts, and housings, with a focus on restoring obsolete or damaged components to original specifications. This work ensures operational readiness of naval equipment by enabling the continued functionality of aging systems through exacting manufacturing standards. All work is to be performed at a primary location in Norfolk, Virginia, with the contract classified under NAICS code 332721 for metal forgings and stampings, indicating a specialized manufacturing scope requiring advanced capabilities. As a subcontract under the Department of Defense’s Mid Atlantic Reg Maintenance Center, the effort directly contributes to fleet maintenance and sustainment timelines, though specific award details and point of contact information are not provided. The solicitation was posted on July 1, 2026, and is intended for qualified contractors capable of delivering high-tolerance components essential to complex machinery restoration.

Precision Turned Product Manufacturing

POSTED

about 2 months ago

DEADLINE