Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Uniform Labeling and Marking Services

Active

Federal

Response Deadline07/27/2026, 04:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract seeks subcontractors to provide uniform labeling and marking services that meet strict military standards for the durable application of identification, size, barcode, and lot number labels. All work must comply with placement and legibility requirements specified by military protocols, ensuring that labels remain readable and intact under operational conditions. The solicitation is reserved exclusively for small businesses under a Total Small Business Set-Aside as defined by FAR 19.5, with the NAICS code 323111 indicating the primary focus on printing and related support activities. Performance is required at West Point, New York, with a zip code of 10996, and responses are due by July 27, 2026, at 4:00 PM Eastern Time. The contract was posted on July 23, 2026, and is managed by the W6QM Micc-West Point office under the Department of Defense.

General Info

Small businesses must provide military-compliant uniform labeling at West Point by July 27, 2026, under NAICS 323111.

Agency

Department Of Defense → W6QM Micc-West PointView Agency

NAICS

323111 - Commercial Printing (except Screen and Books)View NAICS

Place of Performance

West Point, NY, 10996, USA

Set-Aside

SBA

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 23

subcontract

Response DeadlineJul 27

Submission deadline

Response Deadline

07/27/2026, 04:00:00 PM UTCin about 18 hours

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → W6QM Micc-West Point

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → W6QM Micc-West Point

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Durable application of identification, size, barcode, and lot number labels per military placement and legibility standards.

Similar Contracts

Same NAICS industry code

Military Marking, Labeling, and UID ComplianceThis contract requires permanent marking, barcode and RFID labeling services fully compliant with MIL-STD-129 and RQ017 standards, including specialized FAT labeling protocols to meet rigorous military identification requirements. The work must ensure each item is uniquely identified, traceable, and properly labeled using approved methods and materials to support logistics, inventory, and asset management across Department of Defense supply chains. All labeling activities must adhere to strict technical specifications for durability, readability, and data accuracy under operational conditions. The solicitation is structured as a subcontract under a Total Small Business Set-Aside, exclusively available to small businesses as defined by the SBA, with the NAICS code 323111 indicating it pertains to printing and related support activities. It is managed by the ASC Commodities Division of the Department of Defense and has a response deadline of August 8, 2026. The place of performance and point of contact details are not specified, but the work is expected to support federal military logistics infrastructure with no geographic restrictions indicated. Interested parties must submit proposals through the DIBBS portal before the deadline to be considered.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

Safety and Compliance LabelingThe contract requires the production and installation of durable labels compliant with OSHA and NFPA standards for use in fluid identification, pump operations, safety warnings, and unit identification. These labels must be engineered to withstand harsh environmental conditions and maintain legibility over time, ensuring continuous safety and regulatory compliance across operational settings. The work involves precise application techniques and material selection to meet federal safety requirements, with all deliverables subject to strict quality control to prevent misidentification or operational hazards. This is a subcontract under the Department of Transportation’s Hawaii office, with a solicitation posted on July 24, 2026, and a response deadline of August 15, 2026. The NAICS code 323111 indicates the work falls under printing and related support activities, specifically focusing on label manufacturing. Performance location details are not specified, but the labels must be suitable for deployment in DOT-related facilities in Hawaii. Bidders must demonstrate capability in manufacturing standardized safety labels and providing installation services that align with federal safety protocols, though no set-aside provisions or point of contact information is provided in the posting.

Department of Transportation

POSTED

DEADLINE

Blanket Labeling and Packaging ServicesThe contract requires the application of durable labels containing fiber content, NSN, contract number, and DDT warning on specified items, ensuring compliance with military labeling standards. Following label application, the items must be packaged in poly bags with eight units per carton, then palletized on 40x48 inch pallets and secured with shrink wrap according to military logistics specifications. All work must adhere to strict quality and documentation requirements to meet defense supply chain protocols. The contract is structured as a small business set-aside under SBA guidelines, with the NAICS code 323111 indicating it falls under printing and related support activities. The solicitation is managed by the Department of Defense through C AND T SUPPLY CHAIN and is open for responses until August 24, 2026, with performance expected to align with DoD logistics and distribution standards.

C AND T SUPPLY CHAIN

POSTED

DEADLINE

Military-Compliant Marking and LabelingThis contract requires the application of durable, scannable labels and markings in strict compliance with MIL-STD-129 to support military logistics operations and seamless integration with the Wide Area Workflow system. The work must ensure that all markings are legible, weather-resistant, and machine-readable to facilitate accurate tracking and inventory management across the Department of Defense supply chain. The labels and markings must meet all technical specifications for content, placement, and material resilience mandated by the standard to guarantee uninterrupted operational readiness. The solicitation is issued as a subcontract under the NAICS code 323111 for printing and related support activities, with a response deadline of August 8, 2026. Performance is expected to occur at New Cumberland, Pennsylvania, with a zip code of 17070-5002. Although the agency and point of contact details are not provided, the contracting organization is listed as LAND SUPPLIER OPNS ENGINES within the Department of Defense. Participation is open without a specific set-aside designation, and all submissions must adhere to the technical and procedural requirements tied to MIL-STD-129 and WAWF interoperability to be considered.

LAND SUPPLIER OPNS ENGINES

POSTED

DEADLINE

Military-Compliant Labeling and MarkingThe contract pertains to the production and application of military-standard labels requiring strict adherence to defense specifications, including data matrix codes for traceability, ESD warnings marked with Code '39' to ensure electrostatic discharge protection, and hazardous material labels compliant with established military safety protocols. All labeling must be fabricated and applied to meet rigorous environmental and durability standards suitable for defense equipment and systems used in operational environments. The work is classified as a subcontract under NAICS code 323111, indicating it involves printing and related support activities specifically tailored for military use. Performance is expected to support the ACTIVE DEVICES DIVISION of the Department of Defense, with the requirement submitted on July 24, 2026, and responses due by July 31, 2026. The place of performance is not specified, but compliance with all labeling standards and delivery timelines is mandatory to fulfill the subcontract obligation.

ACTIVE DEVICES DIVISION

POSTED

DEADLINE

Annual Contract for Elections Printed Forms and EnvelopesTarrant County is seeking vendors to supply printed forms and envelopes for absentee ballot mailings and other election-related communications, as mandated by the Texas Election Code. The contract is for a base term of twelve months, with the possibility of two additional twelve-month renewal periods at the County’s discretion, contingent on mutual agreement and timely submission of updated documentation prior to each option period. All pricing must be firm and fully inclusive, covering every associated cost including shipping, delivery, installation, and incidental expenses; no additional charges will be permitted after award. Vendors must accept purchase orders as the sole method of payment, and the solicitation includes a 30-day cancellation clause applicable to either party. Bids must strictly comply with all solicitation terms, and any attempt to impose additional legal agreements outside the procurement documents may result in disqualification. The contract is governed by Tarrant County’s local procurement policies, and no federal contracting clause numbering system is applied; instead, custom provisions govern core obligations. Vendors must ensure all materials meet U.S. Postal Service Election Mail guidelines, including proper barcode clear zones and postage markings, while also adhering to strict data security requirements. All sensitive election data must be protected under the CIA triad—confidentiality, integrity, availability—with strong encryption required both at rest and in transit. Vendors must designate a primary security contact, maintain audit logs, and report any data breach within 48 hours using both oral and written notification to Tarrant County’s Chief Information Security Officer. Audit rights are broad, permitting the County to examine systems, records, and subcontractors with reasonable notice, and vendors must submit annual compliance reports verifying log reviews and remediation actions. Data must remain within the 48 contiguous United States at all times, and any transfer outside this boundary requires prior written approval. Criminal background checks are mandatory for personnel accessing County data, with the County covering associated costs. Vendors must indemnify the County against third-party claims arising from their actions and cannot assign the contract without written consent. HUB/DBE participation is a key requirement, with bidders required to provide certification from recognized state or regional agencies, and failure to demonstrate good faith effort may render a bid non-responsive. Awards will go to the lowest responsive bidder meeting all technical and compliance criteria, with no trade-off evaluation permitted. Invoices must be submitted electronically or by mail to the County Auditor’s Office with the assigned purchase order number.

POSTED

DEADLINE

Shipping Container Marking and LabelingThe contract requires the precise and durable marking of shipping containers with specific military-compliant data, including NSN, CAGE code, part number, quantity, contract number, and handling cautions, ensuring all labeling meets established defense standards for longevity and readability under harsh conditions. The work must be performed to ensure full compliance with federal specifications for military shipping and logistics, with emphasis on accurate, high-visibility, and tamper-resistant application methods. This is a total small business set-aside subcontract under NAICS code 323111, issued by the Department of Commerce NOAA, with proposals due by August 4, 2026. The place of performance is specified as Grandview, Missouri, with a zip code of 64030, indicating the physical location where the marking services must be delivered. All contractors must be certified small businesses to be eligible, and the contract is open for submission through the SAM.gov portal.

Department Of Commerce Noaa

POSTED

DEADLINE

Printed and Digital Training Materials SupplyThe contract seeks the supply of printed and digital training materials including workbooks, handouts, binders, and USB drives for distribution to trainees and instructors under a subcontract arrangement. The materials are intended to support training activities managed by the Department of Defense through the Commander office, with performance required to occur in Albany, Georgia, at the specified zip code 31704. The North American Industry Classification System code 323111 indicates the work falls under printing and related support activities. Submission deadlines are firm, with responses due by 2:00 PM Eastern Time on July 29, 2026, and the opportunity was posted on July 24, 2026. All deliverables must meet specified quality and timing requirements to ensure seamless integration into ongoing training programs.

POSTED

DEADLINE

Barcoding and Labeling Compliance ServicesThe contract requires compliance with the Department of National Defence’s D-02-002-001/SG-001 standard for barcoding and labeling of military assets using UCC/EAN-128 symbology with Application Identifiers AI 241 for Product Stock Control Number or AI 7001 for National Stock Number. All labels must include both machine-readable barcodes and legible human-readable text, ensuring accurate identification and traceability across the supply chain. Labels must be durable, resistant to environmental factors, and capable of maintaining readability throughout the product’s lifecycle under operational conditions. This subcontract opportunity is open to qualified vendors capable of delivering labeling solutions that meet Canadian government defense specifications. The solicitation is tied to performance locations in British Columbia and Nova Scotia, with responses due by August 10, 2026. The NAICS code 323111 indicates the work falls under printing and related support activities, emphasizing the need for precision in label design, printing, and material selection. Compliance is mandatory, and failure to adhere to the outlined standards could result in rejection of deliverables or non-payment.

Department of National Defence

POSTED

DEADLINE

Printing and Bidding Document ReproductionThe contract entails high-volume printing and reproduction of bidding documents and construction packages, with specialized handling of large-format materials and professional binding services required to meet project specifications. Work must be executed with precision to ensure documents are accurate, legible, and properly assembled for distribution to contractors and stakeholders involved in public construction initiatives. The scope demands capability in managing large quantities of technical documentation under tight deadlines and quality standards suitable for governmental procurement processes. This is a subcontract opportunity under the NAICS code 323111, issued by the Michigan agency DTMB, with a posting date of July 24, 2026, and a response deadline of August 6, 2026, at 6:00 p.m. No set-aside designation is specified, and the place of performance and point of contact details are not provided in the data, though the work is tied to Michigan-based projects. Interested parties must submit proposals through the designated online portal prior to the deadline to be considered for award.

POSTED

DEADLINE

Military-Compliant Packaging and LabelingThe contract encompasses the custom military packaging, marking, and labeling of seal caps in strict compliance with MIL-STD-129, FED-STD-313, and ASTM D3951 standards, including all required hazard communication labeling to meet federal military specification requirements. This work must be executed to ensure full interoperability and traceability within U.S. Department of Defense logistics systems, covering all stages from initial packaging through final labeling for shipment and delivery. The effort is classified as a subcontract under a Total Small Business Set-Aside, meaning only small businesses qualify to respond, aligning with SBA and FAR 19.5 guidelines. The North American Industry Classification System code is 323111, indicating the work falls under printing and related support activities. The solicitation was posted on July 23, 2026, with a deadline for responses set for July 28, 2026. The contracting activity originates from the Strategic Acq Program Directorate within the Department of Defense, though specific location details for performance, office address, or point of contact are not provided. The contract is accessible through the DIBBS system under the reference number SPE7LX26U8624, and all potential offerors must ensure adherence to all technical, regulatory, and compliance requirements outlined in the referenced military and industry standards. Failure to meet any labeling, packaging, or marking specification will result in non-compliance and potential disqualification.

STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

DEADLINE

Military-Compliant Packaging, Preservation & MarkingThe contract requires adherence to MIL-STD-2073-1E for the package and preservation of military supplies, ensuring all items are properly protected and prepared for long-term storage and transport. Labeling must comply with MIL-STD-129, incorporating GS1-compliant barcodes and DataMatrix symbols to guarantee accurate tracking and inventory management throughout the defense supply chain. The work is classified as a subcontract under NAICS code 323111, indicating it involves printing and related support activities. Performance is localized at Hill Air Force Base with the zip code 84056-5734, and the responsible agency is the Department of Defense under the Depot Hill designation. The solicitation was posted on July 23, 2026, with a firm response deadline of August 3, 2026, leaving a narrow window for qualified vendors to submit proposals.

POSTED

DEADLINE

More opportunities from Department Of Defense → W6QM Micc-West Point

Same awarding agency

Uniform Inspection and Quality Assurance ServicesThe contract titled Uniform Inspection and Quality Assurance Services is a small business set-aside subcontract issued by the Department of Defense under the agency name W6QM Micc-West Point, specifically targeting total small business participation as defined by FAR 19.5. The work involves third-party inspection services to ensure compliance with MIL-STD defect standards, utilizing AQL sampling methods per ANSI Z1.4 for quality control, and verifying dimensional stability of uniform items. Performance is required at West Point, New York, with a zip code of 10996, and the solicitation was posted on July 23, 2026, with responses due by July 27, 2026. The NAICS code 811212 indicates the work falls under laundry and dry-cleaning services, suggesting the inspection focuses on military uniform production or maintenance processes. All activities must align with stringent defense quality protocols to ensure consistency, reliability, and readiness of issued apparel.

Computer and Office Machine Repair and Maintenance

POSTED

DEADLINE

in about 18 hours

Toxicity and Material Compliance TestingThe contract solicits services for conducting toxicity and material compliance testing in accordance with OECD 406 for skin sensitization and OECD 404 for dermal irritation, specifically on uniform materials as governed by 40 CFR regulations. The work is to be performed at West Point, New York, under a subcontract arrangement and is set aside exclusively for small businesses as defined by the SBA. The North American Industry Classification System code 541620 applies, indicating the focus on scientific research and development services. All proposals must be submitted by the deadline of July 27, 2026, and the contract is issued by the Department of Defense through its W6QM Micc-West Point office, reflecting its military application and compliance requirements for materials used in uniform production.

Environmental Consulting Services

POSTED

DEADLINE

in about 18 hours

Uniform Fabric Supply – Polyester/Cotton White TwillThe contract requires the supply of a government-specified polyester/cotton white twill fabric identified as WP-PD-21-01 for use in the production of uniforms, with strict requirements for batch consistency and full traceability throughout the manufacturing and delivery process. The fabric must meet precise quality standards to ensure uniformity across all issued garments, and suppliers must maintain documentation that allows each production lot to be tracked from raw material through final delivery. The solicitation is structured as a subcontract under a Total Small Business Set-Aside, meaning only small businesses certified by the SBA are eligible to bid, and the North American Industry Classification System code 313310 confirms the scope involves textile mill products. The contract is issued by the Department of Defense through its W6QM Micc-West Point office, with performance required at West Point, New York, under the ZIP code 10996. Bids must be submitted by July 27, 2026, at 4:00 PM Eastern Time, following a posting date of July 23, 2026. While no specific point of contact is listed, interested parties can access additional details through the official SAM.gov portal. The emphasis on traceability and small business participation ensures accountability and supports authorized small enterprises within the defense supply chain.

Textile and Fabric Finishing Mills

POSTED

DEADLINE

in about 18 hours

Custom Military Uniform Manufacturing – India White DressesThe contract is for the design and production of India White Dresses specifically for female cadets, requiring strict adherence to the MIL-STD-1608 standards for fit, finish, and durability to ensure consistent quality and military readiness. The work is being handled as a subcontract under a Total Small Business Set-Aside, meaning only small businesses are eligible to respond, with the North American Industry Classification System code 315210 identifying the scope as apparel patternmaking and cutting. The solicitation was posted on July 23, 2026, with a firm deadline for responses on July 27, 2026, at 4:00 PM, and the place of performance is designated as West Point, New York, with a ZIP code of 10996. The awarding agency is the Department of Defense through W6QM Micc-West Point, indicating this is part of a broader military uniform procurement effort tied to the U.S. Military Academy.

Cut and Sew Apparel Contractors

POSTED

DEADLINE

in about 18 hours

Custom Military Uniform Manufacturing – India White TrousersThe contract calls for the production of India White Trousers to exacting military standards, requiring precise pattern alignment, meticulous seam finishing, and strict dimensional stability throughout manufacturing. The work is classified as a subcontract under a Total Small Business Set-Aside, meaning only small businesses qualified under the SBA’s criteria are eligible to respond, with the North American Industry Classification System code 315210 specifically identifying the apparel manufacturing sector. The solicitation was posted on July 23, 2026, with a firm response deadline of July 27, 2026, and all performance must be carried out at West Point, New York, with a zip code of 10996. The contracting agency is the Department of Defense, specifically under the W6QM Micc-West Point office, indicating this is a defense-related procurement tied to military uniform requirements. All submitted proposals must demonstrate capability to meet the rigorous quality and consistency benchmarks expected for military-grade clothing.

Cut and Sew Apparel Contractors

POSTED

DEADLINE

in about 18 hours

Custom Military Uniform Manufacturing – India White CoatsThe contract entails the full-scale manufacturing of India White Coats for military personnel, requiring precise design, cutting, sewing, and rigorous quality assurance processes to meet the exacting standards of MIL-STD-1490 and MIL-STD-1608. The work must be performed to ensure uniformity, durability, and compliance with federal military specifications for both men’s and women’s versions of the coat. The project is structured as a subcontract under a Total Small Business Set-Aside designation, exclusively available to small businesses as defined by the SBA, and falls under NAICS code 315210 which covers apparel accessories and other apparel manufacturing. Performance of this contract is designated for West Point, New York, with a response deadline of July 27, 2026, and the opportunity was posted on July 23, 2026. The contracting entity is the Department of Defense through W6QM Micc-West Point, and although no point of contact is listed, all submissions must be made via the provided SAM.gov portal to ensure proper processing. The requirement underscores the need for high-precision craftsmanship and adherence to stringent military standards, with all stages of production—from pattern development to final inspection—subject to compliance verification.

Cut and Sew Apparel Contractors

POSTED

DEADLINE

in about 18 hours

SOURCES SOUGHT - U.S. Army West Point India White Coats, Trousers, DressesThe U.S. Army West Point is seeking information from small businesses regarding the potential procurement of India White Coats, Trousers, and Dresses for cadet uniforms under a base plus four one-year option contract structured as a total small business set-aside. This sources sought notice is not a solicitation and does not obligate the government to award a contract; it is intended solely to assess market interest and capability among small businesses, including those in 8(a), SDVOSB, WOSB, and HUBZone categories. To support a set-aside determination, respondents must provide detailed information on their business status, UEI and CAGE codes, past performance on similar uniform contracts, production capacity, commercial availability, pricing data, delivery timelines, and terms. The requirement falls under NAICS code 315210 and involves specific items for both male and female cadets, with performance expected at West Point, New York. Respondents are asked to indicate if they intend to compete as a prime contractor or through teaming arrangements, and to identify any factors that may unnecessarily limit competition or restrict market participation. The government is seeking insights on how to structure the requirement to maximize small business involvement and welcomes recommendations to refine specifications or acquisition strategy. No quotes, bids, or proposals will be accepted at this stage, and no costs incurred in responding will be reimbursed. All future solicitations, if issued, will be published on SAM.gov, and failure to respond to this notice does not preclude participation in subsequent opportunities. The response deadline is July 27, 2026, and inquiries should be directed to Ignacio Cordova at the provided contact information.

Cut and Sew Apparel Contractors

POSTED

DEADLINE

in about 18 hours

Primo Growth Regulator ApplicationsThe contract covers the application of Primo plant growth regulator to turf areas at West Point, New York, with the goal of reducing mowing frequency and enhancing overall turf health. This subcontract, posted on July 22, 2026, requires responses by July 31, 2026, and is categorized under NAICS code 561730, indicating it falls within the landscaping and groundskeeping services sector. The work is being managed by the Department of Defense through its W6QM Micc-West Point office, and performance will occur exclusively at the West Point location with a zip code of 10996. The project aims to improve the efficiency and sustainability of turf maintenance by utilizing a specialized growth regulator that moderates turfgrass growth without compromising density or appearance, thereby reducing labor and equipment costs associated with frequent mowing.

Landscaping Services

POSTED

DEADLINE

Security Fence Line Pest MaintenanceThe contract covers pest inspection and treatment services along security fence lines at West Point, New York, with a focus on rodent burrow treatment and vegetation management to maintain clear sightlines and prevent pest infestations near critical perimeter infrastructure. Work includes routine monitoring, targeted extermination of rodents, and control of vegetation growth that could provide shelter or access for pests, ensuring the integrity and security of fenced boundaries. The scope is designed to support defense-related security operations by mitigating environmental risks that could compromise perimeter surveillance or facility defense readiness. This is a subcontract solicited under NAICS code 561710 for pest control services, posted on July 22, 2026, with responses due by July 31, 2026. The contracting activity is associated with the Department of Defense through W6QM Micc-West Point, and the work must be performed at the West Point location with ZIP code 10996. The solicitation does not specify a set-aside classification, and the point of contact information is not provided in the available data. Prospective subcontractors are expected to have the capability to perform specialized pest management services in secure military environments.

Exterminating and Pest Control Services

POSTED

DEADLINE

Systemic Tree and Shrub TreatmentsThe contract pertains to the application of systemic insecticides and fungicides through tree injection methods to control pests and diseases in ornamental trees and shrubs across facilities under the Department of Defense at West Point. The work is classified under NAICS code 561730, indicating it falls within landscaping and other services related to grounds maintenance. Treatments will be delivered via direct injection into the vascular systems of trees and shrubs to ensure targeted, efficient, and environmentally controlled delivery of protective chemicals. The contract is designated as a subcontract and is open for responses until July 31, 2026, with a posted date of July 22, 2026. Performance of the work is limited to the West Point area with a zip code of 10996, and all treatments must align with military installation standards for ecological safety and operational readiness.

Landscaping Services

POSTED

DEADLINE

Bird Exclusion and Control ServicesThe contract titled Bird Exclusion and Control Services pertains to the installation and ongoing maintenance of physical bird deterrent systems including netting, spikes, and humane capture mechanisms on buildings located at West Point, New York, with a ZIP code of 10996. This subcontract is issued under the NAICS code 238290, which classifies it within the miscellaneous building construction contractors category, and is managed by the Department of Defense through its W6QM Micc-West Point office. All work must be performed at the specified location and is intended to mitigate bird-related issues while ensuring compliance with humane practices and structural integrity standards. Bidders must submit their proposals by the deadline of July 31, 2026, at 3:00 PM Eastern Time, following the posting date of July 22, 2026. The contract does not designate a specific set-aside classification, meaning it is open to all eligible small business and general contractors. The scope requires not only initial installation but also regular inspection, repair, and replacement of deterrent systems to ensure continued effectiveness. While contact details are not provided, interested parties can access full solicitation information through the SAM.gov portal at the provided link.

Other Building Equipment Contractors

POSTED

DEADLINE

Structural Pest Control (Wood-Destroying Organisms)The contract involves the inspection and treatment of buildings for termites, carpenter ants, and other wood-destroying pests using both chemical and non-chemical methods to ensure structural integrity and compliance with safety standards. Services must be performed at the facility in West Point, New York, with specific attention to identifying infestations, implementing appropriate control measures, and documenting all findings and treatments. The work requires skilled personnel capable of conducting thorough assessments and applying approved techniques that minimize environmental impact while effectively eliminating threats to wooden structures. This is a subcontract under the NAICS code 561710, issued by the Department of Defense through the W6QM Micc-West Point office, with a response deadline of July 31, 2026, at 3:00 PM. The contract is not subject to any specific set-aside classifications and is intended for qualified subcontractors with demonstrated experience in structural pest control. All work must be completed in accordance with federal regulations and agency requirements, ensuring that treatments are safe, effective, and properly recorded for audit and compliance purposes.

Exterminating and Pest Control Services

POSTED

DEADLINE