This Government Contract opportunity from Department Of Homeland Security was posted on June 22, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

USCGC HAMILTON DIESEL GENERATOR OVERHAUL PARTS

Closed

70Z08526Q025282Federal

Submission Closed06/29/2026, 03:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 336611

New

SLED

F&W, 2018 Munson Packman Boat Repower project

Solicitation # 2018 Munson Packman Boat Repower

The Confederated Tribes of the Colville Reservation Fish and Wildlife Department is seeking a factory-certified marine contractor to perform a complete propulsion repower and helm system integration on a 30 foot Munson Packman landing craft. The project involves the decommissioning and removal of two existing Honda BF250A outboard engines and legacy iST components, followed by the installation of two new Honda BF250D Drive-by-Wire outboards. The scope of work includes comprehensive digital rigging, the installation of new Honda iST electronic control heads at dual helm stations, integration with the existing NMEA 2000 backbone and SeaStar Power Assist steering system, and a full fuel system overhaul using USCG Type A1-15 lines. The project concludes with factory diagnostic checks and a minimum two hour sea trial to validate performance and safety protocols. To ensure quality and warranty coverage, the contractor must be an authorized Honda Marine Dealer or Service Center and employ technicians with at least five years of experience with commercial aluminum vessels and complex marine networks. Proposals must be submitted as a PDF by November 13, 2026, and must provide a firm-fixed price. Award selection is based on a 100 point evaluation criteria, with a preference for responsible Indian Offerors. The contract requires the contractor to maintain significant insurance coverages, including 1 million dollars per occurrence in general liability, and mandates a 25 percent retainage or a performance bond for contracts exceeding 100,000 dollars. All disputes are subject to the jurisdiction of the Colville Tribal Court and tribal law, and contractors must comply with the Colville Tribal Employment Rights Ordinance.

Confederated Tribes of the Colville Reservation

POSTED

DEADLINE

Supply of Marine Scuttles (NSN 2040-01-353-2285)This subcontract involves the manufacture or procurement of marine scuttle hardware under NSN 2040013532285 for the DLA Weapons Support Fluid Handling Division. The contractor is responsible for ensuring all items are made from marine-grade materials and strictly adhere to MIL-STD-129 marking standards. Additionally, all shipments must be palletized and packaged according to RP001 DLA Packaging Requirements for Procurement before being delivered to the designated receiving point. The project falls under NAICS code 336611 and is managed by the Department of Defense. Performance of the contract is centered in New Cumberland, Pennsylvania. Interested parties must note the response deadline of November 9, 2026, to provide the necessary hardware to prime contractors supporting these DLA requirements.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

DEADLINE

MODIFICATION KIT, TRAIN

Solicitation # SPE8E9-27-T-0361

Solicitation SPE8E9-27-T-0361 is a request for the procurement of four modification kits for training aids and devices, identified by NSN 6930-01-600-1175. Issued by the DLA Troop Support Construction and Equipment MRO Service I, the requirement is not a small business set-aside. The delivery is specified as FOB Origin with a required delivery date of April 5, 2027, and a need ship date of October 28, 2026. The items are to be delivered to DLA Distribution Puget Sound in Bremerton, Washington, with inspection and acceptance occurring at the destination. The contract mandates strict adherence to MIL-STD-2073-1E for packaging and MIL-STD-129 for marking, alongside DLA packaging requirements for procurement. Technical and quality standards are governed by the DLA Master List of Technical and Quality Requirements. Key regulatory compliance includes the Buy American Act, the Berry Amendment, and DFARS requirements for safeguarding covered defense information and reporting cyber incidents. Payment processing must be conducted through the Wide Area WorkFlow system. The procurement also prohibits the intentional addition of mercury or mercury-containing compounds to the hardware, except where functionally required and specified by NAVSEA.

CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

DEADLINE

TRAINING SET, FIRE FIGH

Solicitation # SPE8E6-27-T-0421

Solicitation SPE8E6-27-T-0421 is a fixed-price procurement by the Defense Logistics Agency for 39 kits of Fire Fighting and Damage Control training sets, identified by NSN 6930-01-585-8179. The contract is designated as a Service-Disabled Veteran-Owned Small Business Set-Aside, though some sections of the documentation contain conflicting notes regarding small business status. Key delivery requirements include a 76-day delivery window after award, with a need ship date of October 9, 2026, and an original required delivery date of March 30, 2027. Shipping is FOB Origin, with the destination being the DLA Distribution DDSP New Cumberland Facility in Pennsylvania. The contractor must adhere to strict packaging and marking standards, specifically MIL-STD-2073-1E for packaging and MIL-STD-129 for marking. Palletization must comply with DLA requirement RP001. Special material restrictions are in place, prohibiting the intentional addition of mercury or mercury-containing compounds, except where functionally required and specified by NAVSEA. The contract incorporates various federal regulations, including the Buy American and Balance of Payments Program, safeguarding of covered defense information, and hazardous material labeling per 29 CFR 1910.1200. Inspection and acceptance will occur at the destination, and all invoicing must be processed electronically through the Wide Area WorkFlow system.

DDSP NEW CUMBERLAND FACILITY

POSTED

DEADLINE

Solicitation # SPE7M2-27-T-0463

Solicitation SPE7M2-27-T-0463 is a small business set-aside issued by the DLA Weapons Support Nuclear Reactor Program for the procurement of 13 units of Laminated Conducto, identified by NSN 6145-01-524-6075. The requirement is classified under NAICS code 336611. Key delivery milestones include a need ship date of April 26, 2027, and an original required delivery date of January 5, 2028, with a delivery lead time of 167 days after receipt of order. Shipping is designated as FOB Origin, with the destination for both inspection and acceptance being the DLA Distribution DDSP New Cumberland Facility in Pennsylvania. The contract mandates strict adherence to technical and quality requirements found in the DLA Master List, specifically referencing RA001, RC001, RP001, and RQ011. Packaging and marking must comply with MIL-STD-2073-1E and MIL-STD-129, while palletization must follow RP001. A critical environmental restriction prohibits the intentional addition of mercury or mercury-containing compounds to the hardware, except for specific functional exceptions. Administrative requirements include the use of the Wide Area WorkFlow system for electronic invoicing and payment. The solicitation incorporates various FAR and DFARS clauses covering cybersecurity, the Buy American Act, and the prohibition of covered defense telecommunications equipment.

DLA WEAPONS SUPPORT NUCLEAR REACTOR PROGRAM

POSTED

DEADLINE

Solicitation # SPE8E9-27-T-0349

Solicitation SPE8E9-27-T-0349, issued by the Department of Defense DLA Troop Support Construction and Equipment MRO SVC I, is for the procurement of one extension ladder under NSN 5440-01-537-4071. The delivery is required within 167 days after receipt of order, with a need ship date of April 26, 2027, and a final delivery date of September 24, 2027. The item is to be delivered to the DLA Distribution Depot at Hill AFB, Utah. All quotes must be submitted via the DLA Internet Bid Board System by November 9, 2026. The contract mandates strict adherence to quality and packaging standards, requiring compliance with ASTM D3951 for packaging, MIL-STD-129 for marking, and MIL-STD-130N for identification. Manufacturers must maintain an inspection system complying with SAE AS9003 or ISO 9001. Inspection and acceptance will occur at the origin. Due to the nature of the technical data, eligible offerors must possess an approved US/Canada Joint Certification Program certification and approval from the DLA controlling authority to access export-controlled data subject to ITAR or EAR regulations. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and payment. The procurement is subject to various federal regulations, including the Buy American Act, the Berry Amendment, and DFARS 252.204-7012 for safeguarding covered defense information. Evaluation for award may include a HUBZone price evaluation preference, and offerors must certify their small business status and compliance with prohibitions on covered defense telecommunications equipment.

CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

DEADLINE

Req 44950 - Repowering of 8m Vessel with twin Yamaha 150 OBs

Solicitation # 5660485

Solicitation 5660485, issued by the Procurement Services Branch of the Province of British Columbia, seeks a provider for the repowering of the Khutzeymateen Ranger vessel. The scope of work involves the provision and installation of two Yamaha 150 outboard motors, with all work required to be completed by March 31, 2027. The project must adhere to the provided Specifications Summary, and the primary deliverable is the full installation of the two motors. Interested parties must submit their quotes via the BC Bid application by November 9, 2026, using the mandatory Excel pricing Response Form. It is critical that the structure of the response form remains unaltered to avoid rejection. Notably, this solicitation contains a strict restriction against U.S. suppliers; any bid from an entity legally formed, organized, or based in the United States will be disregarded and not evaluated.

Procurement Services Branch

POSTED

DEADLINE

Manufacture of Segment #7 Stern (NSN 3HD 1940-01-676-6351)This subcontract involves the manufacture of one Segment #7 Stern (NSN 3HD 1940-01-676-6351) for prime contractors supporting Navsup Weapon Systems Support Mech projects under the Department of Defense. The selected provider must fabricate components according to Cage Code reference numbers 66618 43175 FN 1 and 66618 43175-001, ensuring all physical identification marking adheres to MIL-STD-130, REV N and packaging meets MIL-STD-2073 standards. To be eligible, the contractor must possess OEM authorization and demonstrate the ability to pass a Government Source Inspection. The final deliverable is one completed, marked, and packaged stern segment. The response deadline for this opportunity is November 27, 2026.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

Preserve, Passage In 4-10-6-1-L

Solicitation # N6264927Q0036

Solicitation N6264927Q0036 is a firm-fixed-price requirement issued by the Navsup Flt Logistics Ctr Yokosuka for the preservation of Passage 4-106-1-L on the USS RUSHMORE (LSD-47) in Sasebo, Japan. The scope of work is driven by corrosion identified during assessment and includes the replacement of 18 square feet of lightweight concrete deck covering, the preservation of 270 square feet of bulkheads and overhead surfaces, and the replacement of 35 square feet of insulation and lagging. All work must adhere to specific military standards for epoxy primers, fiberglass insulation, adhesives, and tape. The period of performance is scheduled from January 11, 2027, to July 31, 2027, with inspection and acceptance occurring at the destination. The government intends to make a single award to the responsible offeror who provides the lowest total priced proposal, provided they quote on all items and demonstrate compliance with DFARS 252.225-7042. Eligible offerors must possess or agree to execute a Master Ship Repair Agreement (MSRA) or ABR in the Japan Region. Proposals must be submitted electronically via email and include a breakdown sheet priced in Japanese Yen. Key administrative requirements include the use of Wide Area WorkFlow (WAWF) for invoicing, compliance with 29 CFR 1915 safety standards, and strict adherence to the safeguarding of controlled unclassified information and cybersecurity protocols under DFARS 252.204-7012.

Navsup Flt Logistics Ctr Yokosuka

POSTED

DEADLINE

DRYDOCK: USCGC DILIGENCE DDL FY27

Solicitation # 70ZU0127DILIGENCEDDL

POSTED

DEADLINE

USCGC DOLPHIN FUEL TANK CLEANING

Solicitation # 52000QR270000488

The U.S. Coast Guard Surface Forces Logistics Center is soliciting quotations for the cleaning and inspection of two diesel fuel service tanks (3-9-1-F and 3-9-2-F), each with a 1450-gallon capacity, aboard the USCGC DOLPHIN (WPB-87354). Located in Mobile, Alabama, the project requires the removal and legal disposal of 1400 gallons of contaminated diesel fuel, complete with a documented chain of custody. The scope of work includes atmospheric testing, interior cleaning of tank surfaces, visual inspections of structural conditions and coatings, and the installation of new gaskets and hardware. The contractor must also perform initial and post-service operational tests on tank level indicators and vent check valves in the presence of a Coast Guard Inspector. This procurement is a total small business set-aside under NAICS code 336611 and will be awarded as a firm-fixed-price contract using simplified acquisition procedures. The requested period of performance is between November 15, 2026, and December 15, 2026, with the total duration of work not to exceed five days after the award date. Interested vendors must be registered in SAM.gov and submit a detailed cost breakdown by November 9, 2026. Award will be based on the best value to the government, considering price, specifications, quality, and past performance.

POSTED

DEADLINE

Fuel Injection Pump Overhaul

Solicitation # N5005427Q0016

Solicitation N5005427Q0016 is a combined synopsis and solicitation for the overhaul of 32 LPD-17 class MPDE Fuel Injection Pumps for the USS San Antonio. The Department of Defense, through the Mid Atlantic Regional Maintenance Center in Norfolk, Virginia, intends to award this contract on a sole source basis to Fairbanks Morse under the authority of FAR 13.106-1(b)(1)(i). The work must be performed at the OEM facility in accordance with OEM procedures and the MPDE maintenance handbook, including joint inspections of disassembled components and a final receipt inspection upon return to the SIMA Diesel shop. The period of performance is scheduled from November 9, 2026, to November 30, 2026, with delivery to MARMC in Norfolk, Virginia. This procurement is conducted using Simplified Acquisition Procedures for commercial items under FAR Part 13 and FAR 12.6. Interested parties must be registered in the System for Award Management and submit quotes via email to the primary point of contact by November 2, 2026. Required quote elements include pricing, business size, payment terms, and a demonstration of technical capability to meet all specifications. The contract incorporates various federal and defense clauses, including Buy American certifications, cybersecurity requirements under DFARS 252.204-7012, and FOB Destination shipping terms.

Mid Atlantic Reg Maintenance Ctr

POSTED

1 day ago

DEADLINE

in 4 days

AI Contract Overview

The Department of Homeland Security, through the United States Coast Guard’s Surface Forces Logistics Center, intends to award a sole-source Firm Fixed Price contract to Blanchard Machinery Co. for the procurement of replacement parts necessary to overhaul the Ship’s Service Diesel Generators aboard the USCGC HAMILTON. This acquisition is conducted under Federal Acquisition Regulation Parts 12 and 13, leveraging commercial item procedures to justify a non-competitive award based on the unique fit of the supplier’s parts for the specific Caterpillar engine components required. The North American Industry Classification System code is 336611 for Ship Building and Repairing, and the acquisition is explicitly excluded from small business set-asides, confirming the offeror is not a small business as defined by the SBA. The Statement of Work outlines a detailed parts list exceeding 150 unique items, including rocker arms, lifters, camshafts, gaskets, seals, bearings, injectors, pumps, hoses, and various fasteners, all required to restore the #1 and #2 SSDGs to safe and reliable operational status. Delivery of these parts must occur by July 6, 2026, via local pickup or delivery at the United States Coast Guard Base Charleston in North Charleston, South Carolina. The procurement is not a formal solicitation; responses must demonstrate clear and compelling evidence that competition would benefit the Government and must be submitted via email to Sean McTague by 8:00 AM Pacific Time on June 29, 2026, with the solicitation number included in the subject line. No cost data, contract value, or pricing information is provided, and the contract will be awarded on a firm fixed price basis without competition unless compelling evidence is received to justify opening the procurement to other sources. There are no specified packaging, inspection, quality, or security requirements beyond the delivery of correct parts by the stated deadline, and no contract clauses, evaluation factors, or award criteria beyond the sole-source justification under FAR 13.106-1(b)(1) are detailed in the documentation.

General Info

USCG awards Blanchard Machinery sole source contract for SSDG overhaul parts, delivery due July 6, 2026, at Charleston.

Agency

Department Of Homeland Security → Sflc Procurement Branch 2(00085)

NAICS

336611 - Ship Building and Repairing

Place of Performance

North Charleston, SC, 29405, USA

Set-Aside

Documents

SOW for Hamilton DD FY26 Caterpillar Center Section Overhaul Parts

sow

High

Notice of Intent to Sole Source 70Z08526Q025282

notice-of-intent

Low

AI Contract Breakdown

Uniform Contract Format

Timeline

PhaseClosed

PostedJun 22

special-notice

Response DeadlineJun 29

Deadline has passed

Submission Closed

06/29/2026, 03:00:00 PM UTC

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Homeland Security → Sflc Procurement Branch 2(00085)

Contacts2 people available

OfficeALAMEDA, CA, 94501, USA

Organization / AgencyDepartment Of Homeland Security → Sflc Procurement Branch 2(00085)

Office AddressALAMEDA, CA, 94501, USA

Contacts

McTague Sean

ULISES BALMACEDA

Full Description

NOTICE OF INTENT TO SOLE SOURCE 70Z08526Q025282

The Department of Homeland Security {DHS}, United States Coast Guard {USCG} Surface Forces Logistics Center {SFLC}, located at 1 Eagle Road Bldg. 55, Alameda CA 94501 is issuing this Notice of Intent {NOI} to inform industry contractors of the Government's intent to Award a Sole Source Firm Fixed Price {FFP} Contract IAW Federal Acquisition Regulation {FAR} Part 12 and 13 procedures.

The intended Contractor BLANCHARD MACHINERY CO, 3151 Charleston Hwy, West Columbia, SC29172

USCGC HAMILTON requires procurement of Ship’s Service Diesel Generator parts procurement.

This procurement is being conducted using commercial item procedures pursuant to Federal Acquisition Regulation {FAR} Part 12 and FAR Part 13, specifically FAR 13.106-1{b}{1}, allowing the Contracting Officer

{KO} to solicit from one source.

The North American Industry Classification System {NAICS} for this requirement is 336611 - Ship Building and Repairing. The Product of Service Code for this requirement is 2090. This will not be a small business under the Small Business Administration {SBA} size standard for this sector.

This notice of intent is neither a formal solicitation nor a request for competitive proposals. No solicitation document is available, and telephone requests will not be honored. No award will be made on the basis of unsolicited quotations or offers received in response to this notice. Any response to this notice must show clear, compelling and convincing evidence that competition will be advantageous to the Government. The intent of this synopsis is for informational purposes only. Information received will normally be considered solely for the purpose of determining whether to conduct competitive procurement. A determination by the Government not to complete this action based on this notice is solely within the discretion of the Government.

All inquiries and concerns must be addressed in writing via e-mail to Mr. Sean McTague at contact@example.gov with the following information referenced in the subject line, Solicitation 70Z08526Q025282. A determination by the Government not to complete this proposed procurement based on the responses to this notice is solely within the discretion of the Government. Information received will be considered solely for the purpose of determining whether to conduct competitive procurement. All interested parties who are responsible, certified, and capable may identify their interest and may submit an offer or quotation which shall be considered by the agency no later than 8:00 AM Pacific Time

{PST} on June 29, 2026, to Mr. Sean McTague at contact@example.gov

The interested parties bear full responsibility to ensure complete transmission and timely receipt.

TATEMENT OF WORK (SOW) FOR

#52000PR260025282 Hamilton DD FY26 Caterpillar Center Section Overhaul Parts

Background. CGC Hamilton is conducting maintenance on the SSDG and requires the following parts to complete maintenance.

Scope. Receive the parts requested from Blanchard Caterpillar

Part Number

Name (Description)

Qty

2816159

ARM AS ROCKER

2302621

ARM AS-ROC

1463740

DAMPER GP-BA

2827944

LIFTER AS-

5744543

LIFTER AS-VA

2287090

SEAL-O-RING

4522501

CAMSHAFT AS-

4522502

CAMSHAFT AS-

4522503

CAMSHAFT AS-

4522504

CAMSHAFT AS-

5P8210

SEAL-O-RING

6V5048

SEAL-O-RING

6V5064

SEAL O RIN

7N3368

GASKET

7N4932

GASKET

7N4945

GASKET

7N6806

SEAL

9L1480

GASKET

3137770

PUMP GP-F XF

3920217

INJECTOR GP-

4P5638

PUMP GP GASKET

2473796

SEAL O RING

1123540

BOLT-HEX HEA

3008579

SEAL O RING

4P4460

GASKET SEAL O RIN

6V5064

SEAL O RIN

7N3368

GASKET

8L2786

SEAL O RING

5091016

TURBO GP-BAS

4160610

PUMP GP-WATE

5404708

PUMP AS-WATE

4457604

HARNESS AS

4457605

HARNESS AS

10R4343

CYLINDER PACK-3508

Part Number

Name (Description)

Qty

10R4343

CORE

1003878

SPRING-INJ

1011198

CAM BEARING

1011365

THRUST WASHER

1011368

THRUST WASHER

1011372

BEARING

1092332

SEAL O RING

1097411

SEAL-O-RING

1123102

SEAL O RIN

1259751

BEARING

1326469

HARNESS AS

1367227

SEAL O RIN

1406468

SHIELD AS

1406469

SHIELD AS

1409597

BEARING-SLEE

1417143

HOSE-ELBOW

1445692

GASKET

1492209

SEAL

1515257

SEAL

1546389

BUTTON

1623906

PUMP AS-F PR

1637826

GASKET

1874606

HOSE AS

2071364

BELLOWS AS

2071390

BELLOWS AS.

2147566

SEAL-O-RING

2176692

HOSE-TEE

2287097

SEAL-O-RING

2301072

GASKET

2302633

SHAFT AS-ARM

2330643

GEAR-FLYWHEE

2353546

SEAL-O-RIN

2385080

SEAL-O-RING

2385081

SEAL-O-RING

2415928

GASKET

2416236

GASKET

2432288

GASKET

2594598

SEAL-O-RING

2594600

SEAL-O-RING

2639597

THERMOCOUPLE

2657537

BRIDGE-FLOAT

2693129

HOSE

2697885

SEAL-O-RING

Part Number

Name (Description)

Qty

2843920

SHIELD

2986387

SEAL-O-RIN

2K4973

NUT

2N2766

LOCK NUT

2W0752

GASKET

3094550

GASKET

3095088

HOSE AS.

3103954

SEAL-O-RING

3237347

SEAL-O-RING

3H5939

GASKET

3J1907

SEAL

3J7354

SEAL O RING

3P6061

GASKET

4200652

SEAL AS

4200653

SEAL AS

4289129

GASKET

4289130

SEAL

4477206

SEAL-O-RING

4973911

GASKET-ACCES

4B8407

GASKET

4F7387

SEAL

4H7869

GASKET

4S5898

SEAL-O-RING

5051567

SHIELD AS-EX

5051568

SHIELD AS-EX

5328532

SEAL-ROD END

5755643

HOSE AS.

5B4399

RING

5P0840

SEAL-O-RING

5P1469

CM-HOSE STK

252

5P7818

SEAL

5P8880

BOLT

6F4868

GASKET

6J2680

SEAL

6K6307

SEAL O RING SEAL

6V0405

SEAL O RING

6V1454

SEAL O RING

6V3348

SEAL

6V3908

SEAL-O-RING

6V6228

SEAL O RING

6V6609

SEAL

6V8001

SEAL

6V8002

SEAL

Part Number

Name (Description)

Qty

6V8260

SEAL

6V9027

SEAL-O-RING

7C3258

WASHER AS

7E3921

VALVE 355

7L6443

BOLT-HIGH TEMP

7N3049

GASKET

7N3218

PLATE-CAM TH

6190636

GASKET

7N5246

WASHER-THRUS

7N7539

WASHER-THRUS

7X4805

SEAL O RING

7X7875

ROD END

8C0562

SEAL

8J6775

SEAL

8T1919

SEAL

8T2928

SEAL

8T2929

SEAL

9F7707

RING

9L7373

BOLT

9M2610

SEAL O RING

9X7523

SEAL

9X8872

BOLT

1073759

SEAL AFTCLR

2828217

CORE AS-AFTC

6V9027

SEAL-O-RING

1496035

BEARING-MAIN

7C6209

PLATE-THRUST

5697728

SEAL-CRANKSH

5697729

SEAL-CRANKSH

2594600

SEAL-O-RING

3103954

SEAL-O-RING

OS1594

CAP SCREW

1367227

SEAL O RIN

1653932

BOLT-HEX HEA

1653934

BOLT-HEX HEA

1782437

SEAL

1808424

SEAL-O-RING

1A5964

CAPSCREW

2525658

HOSE AS

3102233

NUT-HEX

3419211

GASKET

3836859

HOSE AS-WATE

5326587

HOSE AS-WATE

Part Number

Name (Description)

Qty

6V1943

BOLT

6V6753

BOLT

7N7559

GASKET

2714926

SEAL

5H6734

SEAL-O-RING

2353546

SEAL-O-RIN

5N1940

GASKET

6V3348

SEAL

1275400

BEARING

2657538

BRIDGE FLOAT

4600944

COUPLING ELE

5685626

DISC

5685627

HUB-FLEX

Objective. The objective of this requirement is to return the #1 and #2 SSDG to safe and reliable operations.

Security Requirement. N/A

Place of performance.

Local Pickup/delivery of parts LTJG Claire Portigue

SFLC LRE PL

UNITED STATES COAST GUARD BASE CHARLESTON

1050 Register St North Charleston, SC 29405-2421

Required Delivery Date : 07/06/2026

Points of Contact. LTJG Javon Wingate SFLC-LRE-PDM-APM2 Cell: (757)- 980-3066

More opportunities from Department Of Homeland Security → Sflc Procurement Branch 2(00085)

Same awarding agency

NAICS: 541330

Federal

Marine Engineering & Technical Documentation ConsultantThis subcontract for Marine Engineering and Technical Documentation Consulting supports the USCG USCGC HEALY SLEP projects through the Department of Homeland Security. The selected consultant will be responsible for integrated system design, drafting, and the creation of provisioning data requirements for prime contractors. Key deliverables include System Arrangement and Detail drawings, system schematics, Material Lists with NSNs, the Integrated Master Schedule, and Provisioning Technical Data, all developed using CAD software in accordance with USCG and MIL-STD standards. The project is categorized under NAICS code 541330 and is managed by the Sflc Procurement Branch 2. Performance of the contract will take place in Seattle, Washington. The response deadline for this opportunity is October 6, 2027.

POSTED

DEADLINE

Marine Electrical Cable & Wiring SubcontractorThis subcontract involves the supply and installation of electrical cabling for DFT and Steering Control systems on USCG USCGC HEALY SLEP projects. The scope of work includes routing marine-grade cabling through ducts and raceways, terminating cables at consoles and cabinets, and delivering fully installed and tested wiring harnesses. All work must be performed in accordance with SFLC Std Spec 3041 and 3042, as well as MIL-STD-1399-300-1. Managed by the Department of Homeland Security through the SFLC Procurement Branch 2, the project is located in Seattle, Washington. The contract falls under NAICS code 238210, with a response deadline set for October 6, 2027.

Electrical Contractors and Other Wiring Installation Contractors

POSTED

DEADLINE

Steering Control System Specialist (COTS PLC)This subcontract opportunity with the Department of Homeland Security's Sflc Procurement Branch 2 involves the replacement of existing steering control systems with COTS PLC-based designs for the USCGC HEALY SLEP projects. The selected specialist will be responsible for interfacing new PLC systems with existing electro-hydraulic steering gear and navigation systems, configuring communication protocols, and ensuring full adherence to COTS standards and USCG navigation interface requirements to deliver a fully operational steering control system. The project is based in Seattle, Washington, under NAICS code 334511. Interested parties must submit their responses by October 6, 2027.

Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

POSTED

DEADLINE

Boiler Control Systems & PLC IntegratorThis subcontract opportunity with the Department of Homeland Security involves the replacement of obsolete boiler PLCs and burner sequencing controls for prime contractors working on USCG USCGC HEALY SLEP projects. The selected integrator will be responsible for designing and installing PLC-based controls, programming burner sequencing, and conducting initial light-off and burner adjustments. All work must be performed using a combustion analyzer in strict accordance with MIL-STD-1399-300-1 and USCG Tech Pub S9517-AY-MMC-010 to ensure a fully operational control system. The project is based in Seattle, Washington, under NAICS code 332410. Managed by Sflc Procurement Branch 2, the contract requires the delivery of a functional boiler PLC and burner sequencing control system. Interested parties must submit their responses by the deadline of October 6, 2027.

Power Boiler and Heat Exchanger Manufacturing

POSTED

DEADLINE

Marine Piping & Mechanical Installation ContractorThis subcontract for the Department of Homeland Security involves the shipboard installation of the DFT, feedwater treatment systems, and associated piping for the USCG USCGC HEALY SLEP projects in Seattle. The contractor is responsible for installing equipment on foundations according to Coast Guard drawings, performing pipe cleaning, flushing, and testing, and welding copper-nickel and bronze piping. All work must adhere to SFLC Std Spec 6310 and MIL-STD-777 standards to deliver a fully installed and tested boiler feedwater piping and tank system. The opportunity is managed by the Sflc Procurement Branch 2 under NAICS code 336611. The solicitation was posted on September 18, 2026, with a response deadline of October 6, 2027.

Ship Building and Repairing

POSTED

DEADLINE

Deaerating Feed Tank (DFT) & Feedwater Treatment System ManufacturerThis subcontract through the Department of Homeland Security involves the design, manufacture, and delivery of one Deaerating Feed Tank and NSTM 220 V2 compliant feedwater treatment systems for the USCG USCGC HEALY SLEP projects. The manufacturer must utilize MIL-C-15726 Copper-Nickel Alloy and MIL-B-24480 Bronze/Nickel-Aluminum materials and maintain ANSI/ASQ 9001:2015 certification. The project is managed by the Sflc Procurement Branch 2 and requires delivery of the equipment to the installation site in Seattle, Washington. The response deadline for this opportunity is October 6, 2027.

Pump and Pumping Equipment Manufacturing

POSTED

DEADLINE

Military-Grade Radar Component Packaging & PreservationThis subcontract opportunity with the Department of Homeland Security's SFLC Procurement Branch 2 involves providing specialized preservation, packaging, and marking services for sensitive electronic radar equipment. The selected provider will support prime contractors on USCG Surface Forces Logistics Center projects by applying corrosion prevention materials, implementing ESD protection for electronics, and securing components in military-spec crates. All packages must be marked according to government specifications using industrial equipment to ensure components are ready for transport. The project is based in Baltimore and falls under NAICS code 488410. Interested parties must submit their responses by the deadline of December 1, 2026.

POSTED

DEADLINE

Radar Pedestal Mechanical Repair & OverhaulThis subcontract, managed by the Department of Homeland Security's SFLC Procurement Branch 2, involves the mechanical overhaul and repair of radar pedestal assemblies, specifically part number 54.2424.600.00 and NSN 5985-01-676-8432. The scope of work includes mechanical disassembly, cleaning, part replacement, and the testing of rotation and stability using precision alignment and heavy mechanical tooling. All services must comply with USCG SFLC repair and preservation standards to ensure the delivery of certified overhauled pedestals for prime contractors on USCG Surface Forces Logistics Center projects. The project is categorized under NAICS code 811210 and will be performed in Baltimore. The solicitation was posted on August 24, 2026, with a response deadline of December 1, 2026.

Electronic and Precision Equipment Repair and Maintenance

POSTED

DEADLINE

AN/SPS-75 Radar Electronic Component RepairThis subcontract involves the overhaul and repair of AN/SPS-75 radar electronic components for prime contractors supporting the USCG Surface Forces Logistics Center. The scope of work includes the disassembly, inspection, and diagnostic troubleshooting of power supplies, circuit card assemblies, and RF/IF units. All work must be performed using specialized RF/IF test equipment and circuit board diagnostic tools in strict accordance with OEM standards and proprietary technical data to ensure the delivery of fully repaired and tested components. The project is managed by the Department of Homeland Security under the Sflc Procurement Branch 2 and is categorized under NAICS code 334290. Performance of the contract will take place in Baltimore. The solicitation was posted on August 24, 2026, with a response deadline of December 1, 2026.

Other Communications Equipment Manufacturing

POSTED

DEADLINE

TRS-3D /AN/SPS-75 Radar repairs/ overhaul services

Solicitation # 70Z08526RRJ001B00

The United States Coast Guard Surface Forces Logistics Center is soliciting repair and overhaul services for the AN/SPS-75 Air Search Radar System, specifically for the 418-foot Legend-class National Security Cutter fleet. This is a sole-source acquisition awarded to Northern Defense Industries, LLC, as they are the only authorized U.S. service provider for these proprietary OEM parts and technical data. The scope of work includes the disassembly, inspection, testing, repair, preservation, packaging, and marking of various critical components, such as power supplies, circuit card assemblies, and radar set subassemblies. All repairs must adhere to Original Equipment Manufacturer specifications to maintain operational readiness and system warranties. The contract is structured as a requirements contract with fixed-price delivery orders, consisting of a base period and three one-year ordering periods, with an additional six-month extension option. Performance is primarily conducted at the contractor's facilities, with a strict requirement for items to be preserved for at least two years of warehouse storage and packaged according to military standards. Award is based on technical capability and fair and reasonable pricing, with evaluations focusing on resources, quality assurance, and past performance. Administrative requirements include electronic invoicing via the Invoice Processing Platform and the provision of a dedicated Project Manager to serve as the primary point of contact.

Electronic and Precision Equipment Repair and Maintenance

POSTED

DEADLINE

Supply of Appleton Jib CylindersThis subcontract opportunity, managed by the Department of Homeland Security's SFLC Procurement Branch 2, involves the procurement and delivery of three brand-name Appleton Jib Cylinders, part number YMD-9526, for USCG Surface Forces Logistics Center projects. The contract is designated as a Total Small Business Set-Aside under NAICS code 423830. To be eligible, providers must submit an authorized distributor letter from Appleton Marine Inc. The selected contractor is responsible for ensuring all items are packaged and marked according to MIL-STD-2073-1E, MIL-STD-129R, and ISO/IEC-16388-2007 standards. The final delivery of the three packaged cylinders is to be made to Baltimore, Maryland, specifically in the Curtis Bay area. The response deadline for this solicitation is July 26, 2027.

Industrial Machinery and Equipment Merchant Wholesalers

POSTED

DEADLINE

Solicitation # 70Z08526Q40200B00

Solicitation 70Z08526Q40200B00 is a combined synopsis and request for quote issued by the U.S. Coast Guard Surface Forces Logistics Center for the procurement of specific brand name components from Appleton Marine Inc. This is a Brand Name Only solicitation with no substitutions authorized; therefore, interested vendors must be authorized distributors and provide an authorized distributor letter from the Original Equipment Manufacturer with their quotation. The requirement is a total small business set-aside under NAICS code 333995 and will result in a firm-fixed-price purchase order. The procurement consists of three line items: three Jib Cylinders (NSN 3040 01-F12-2745), four Luff Cylinders (NSN 3040 01-F12-2743), and ten Sheaves (NSN 3020 01-F12-2750). Strict packaging and marking standards apply, including MIL-STD-2073-1E Method 10 for cylinders and ASTM D5118 fiberboard boxes for sheaves, with all items requiring marking per MIL-STD-129R and barcoding per ISO/IEC-16388-2007. Delivery is required by September 30, 2026, to the USCG Surface Forces Logistics Center in Baltimore, Maryland, with shipping terms set as FOB Destination. Offers will be evaluated based on price and the ability to meet the brand name and authorized distributor requirements. Successful contractors must submit invoices through the Invoice Processing Platform with payment terms of Net 30. All submissions must include the vendor's Unique Entity Identifier and CAGE code, and offerors must maintain current representations and certifications in the System for Award Management.

Fluid Power Cylinder and Actuator Manufacturing

POSTED

3 months ago

DEADLINE

in 9 months

View Details

Earlier notices in this NAICS code

Posted before this notice, open and closed

Solicitation # N2979461684025

Navsup Flt Logistics Ctr Yokosuka

POSTED

CLOSED

ACCESSIBLE VOID, 6-48-1-V; REPAIR UPTAKE SPACE IN 5-49-1-Q; REPAIR AND PRES ERVE

Solicitation # N6275826PRRU318

Navsup Flt Logistics Ctr Yokosuka

POSTED

CLOSED

LSD-47 CHEMICAL-RESISTANT FLOORING IN 03-29-0-L; REPLACE

Solicitation # N6264926Q0389

Navsup Flt Logistics Ctr Yokosuka

POSTED

CLOSED

Main Propulsion Diesel Engine Parts

Solicitation # N5005426P0127

Mid Atlantic Reg Maintenance Ctr

POSTED

DEADLINE

BILGE AREA IN 6-98-0-J; PRESERVE ELM-255046; ACCOMPLISH

Solicitation # N6275826PRRU319

Navsup Flt Logistics Ctr Yokosuka

POSTED

CLOSED

LSD-47 2PK CHEMICAL-RESISTANT FLOORING IN 2-25-1-L; INSTALL

Solicitation # N6264926Q0310-S

Navsup Flt Logistics Ctr Yokosuka

POSTED

CLOSED

USS BLUE RIDGE (LCC-19) 5C1 DSRA TYCOM# 8 (Yokosuka, Japan)

Solicitation # N6264925RA053

Navsup Flt Logistics Ctr Yokosuka

POSTED

CLOSED

USCGC WAESCHE FUEL OIL PUMP (FOP) MOTOR

Solicitation # 70Z08526Q025798

Sflc Procurement Branch 2(00085)

POSTED

CLOSED

Solicitation # SPE7M4-26-T-169R

FLUID HANDLING DIVISION

POSTED

CLOSED

USCGC OAK THRUSTER GENERATOR REPAIR

Solicitation # 70Z08526Q0024820

Sflc Procurement Branch 2(00085)

POSTED

CLOSED

Overhaul (soft kits only) and testing of Marotta valves

Solicitation # N6883626P0049

Navsup Flt Logistics Ctr Jacksonville

POSTED

DEADLINE

USS BLUE RIDGE (LCC-19) FY26 CNO DSRA TYCOM# 4 (Yokosuka, Japan)

Solicitation # N6264925RA028

Navsup Flt Logistics Ctr Yokosuka

POSTED

4 months ago

CLOSED

3 months ago

View Details

Find Active Opportunities Like This

Get AI-powered intelligence on the opportunities still open

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS