Fumika Yamasaki is a government contact. Fumika is associated with 15 contracts. Activity spans Ship Building and Repairing, Prefabricated Metal Building and Component Manufacturing, and Hardwood Veneer and Plywood Manufacturing.
Person Profile
Contracting officer information and contact details
Solicitation N6264926R0013 is a request for a Firm-Fixed-Price contract for the repair, continuous maintenance, and alteration of the YON-285 craft, to be performed at Commander, Fleet Activities Sasebo. The scope of work encompasses eleven individual job specifications, including underwater hull repair and preservation, cathodic protection installation, electrical modifications, and the installation of a knuckle crane. The project also requires the contractor to handle the docking and hauling out of the barge at their own facility, including the provision of temporary pier shacks and portable heads. Performance is scheduled across various options, with key dates ranging from September 2026 through May 2027.
The procurement process has undergone fifteen amendments, with the final closing date extended to October 2, 2026, at 10:00 AM JST. Award will be based on Best Value, utilizing a trade-off source selection procedure where past performance is weighted more heavily than price. Technical proposals are evaluated on an acceptable or unacceptable basis, focusing on labor hours, management staffing plans, and milestone schedules. All pricing must be submitted in Japanese Yen. The contract is managed by NAVSUP Fleet Logistics Center Yokosuka, with Jason Rankin serving as the primary point of contact.
Solicitation N6264926Q0482, issued by NAVSUP Fleet Logistics Center Yokosuka, is a firm-fixed-price request for the prefabrication of one new bow ramp for the LCU-1651 (NBU-7). The work is to be performed at the contractor's shop, with final delivery and acceptance occurring at SRF and JRMC Yokosuka, specifically in Sasebo, Japan. The scope includes the fabrication of the main structural shell, plating, framing, and permanent stiffeners, as well as cleaning, preservation, and the application of a specific primer. The period of performance is established from September 29, 2026, to March 31, 2027, with a final delivery deadline of April 30, 2027.
To be eligible for award, offerors must certify that they hold an active U.S. Navy Master Ship Repair Agreement (MSRA) or Agreement Between Parties (ABR) in the Japan Region. Additionally, contractors located outside of Japan must demonstrate compliance with DFARS 252.225-7042. The government intends to make a single award based on the lowest total priced proposal from a responsible offeror. The contract incorporates strict quality management standards per NAVSEA Standard Item 009-04 and requires adherence to MIL-STD-1689A for welding inspections. Payment will be processed electronically via Wide Area WorkFlow (WAWF) in Japanese Yen.
This solicitation, numbered N6264926QE039, seeks the purchase of four 40-foot ISO668-compliant containers for storage use at the Akasaki Container Yard in Sasebo, Japan, with deliveries required to be completed within two months after contract award. The containers must meet specific physical standards including double doors on the short side, forklift pockets, and exterior painting in RAL6003 Olive Green, and may be either brand new or used—though used containers require a minimum one-year warranty covering structural integrity. All items must conform to MIL-STD-130 and MIL-STD-129 for unique item identification and shipment labeling, withUIDs marked using two-dimensional data matrix symbology compliant with ISO/IEC 16022, and verified using automated technology per Appendix A of MIL-STD-130. The procurement is firm fixed price, quoted in Japanese yen based on the FY26 exchange rate of JPY 150.4415 per USD 1.00, with payment processed electronically through the WAWF system after submission of an Invoice and Receiving Report Combo. The delivery point is FOB Destination at Sasebo, Japan, and all items are subject to inspection and acceptance at the delivery site by the designated representative.
The solicitation strictly limits eligibility to contractors authorized to operate in Japan, requiring non-Japanese entities to submit official documentation from the Japanese government—such as a certificate of incorporation, business license, certificate of authority, or articles of organization—to prove legal operational status; failure to provide this documentation renders a quotation non-responsive. All offerors must maintain an active SAM registration with updated representations and certifications, and Japanese offerors must possess a Unique Entity Identifier, obtainable via Tokyo Shoko Research Ltd. as a DUNS number. Submissions must be in English, include pricing in JPY with all incidental costs bundled into the unit price, and be submitted via email, fax, hand delivery, or mail by 10:00 AM JST on 18 August 2026. Required documentation includes the completed SF 1449, responses to specified FAR and DFARS provisions, and compliance with antiterrorism training and whistleblower notification requirements. The award will be made on a best value tradeoff basis, primarily driven by price unless past performance indicates a lower-priced offer does not deliver optimal value. Contractors must ensure any personnel accessing U.S
The solicitation for moving a pier shack from Dry Dock #2 to India Pier #1 in Sasebo, Nagasaki, under contract number N6264926QE038, has been amended to extend the quote submission deadline to 10:00 a.m. on 12 August 2026, Japan Standard Time, and to adjust the period of performance to span from 20 August 2026 to 4 September 2026. Only entities duly authorized to operate and conduct business in Japan are eligible to participate, with contractors located outside Japan required to provide official documentation from the Government of Japan proving their legal right to operate there, such as a certificate of incorporation, business license, certificate of authority, or articles of organization; failure to submit one of these documents will render the quotation non-responsive and ineligible for award. The physical address listed in SAM will be verified, and no awards will be issued to contractors without proper authorization to conduct business in Japan. The opportunity is managed by the Naval Supply Systems Command Fleet Logistics Center Yokosuka, and inquiries should be directed to the designated point of contact, Fumika Yamasaki.
Department Of DefenseSasebo,
JP-42,
JPN
NAICS
332311
Prefabricated Metal Building and Component Manufacturing
This solicitation, N6264926QE036, seeks proposals to provide and operate a 50-meter class man-lift for the U.S. Navy’s Fleet Logistics Center in Yokosuka, with performance required in Sasebo, Nagasaki, Japan. The contract is open exclusively to entities legally authorized to conduct business in Japan, as mandated by DFARS 252.225-7042. Contractors not physically based in Japan must submit official documentation from the Government of Japan proving their legal operational status, such as a certificate of incorporation, business license, certificate of authority, or articles of organization; failure to provide one of these documents will render the quotation non-responsive and ineligible for award. The physical address listed in SAM will be verified, and only entities with a legitimate presence in Japan will be considered. The solicitation was posted on July 21, 2026, with responses due by August 4, 2026, under NAICS code 532490, and no small business set-aside applies. All inquiries should be directed to Fumika Yamasaki at the provided contact information.
Department Of DefenseSasebo,
JP-42,
JPN
NAICS
532490
Other Commercial and Industrial Machinery and Equipment Rental and Leasing
The contract titled NBU-7 Repair of Dozer is a special notice issued by the Naval Supply Systems Command Fleet Logistics Center Yokosuka under the Department of Defense, with solicitation number N6264926QE034. It was posted on July 8, 2026, and responses are due by July 24, 2026, with the primary point of contact being Fumika Yamasaki, reachable via email at [email hidden] or phone at 0956502851. The contract falls under NAICS code 811310, indicating it pertains to industrial machinery and equipment repair and maintenance services. The office is based in FPO, AP, 96349-1500, and the work is to be performed in Saikai, Nagasaki, Japan. No specific set aside is designated for this opportunity, meaning it is open to all eligible contractors regardless of size or status. The reference to an attached Statement of Work confirms that detailed technical requirements and scope of repairs are documented externally and must be reviewed for full compliance.
Department Of DefenseSaikai,
JP-42,
JPN
NAICS
811310
Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance
The contract solicitation N6264926Q0374 for FAS-34 Overhaul is a simplified acquisition under the Department of Defense, issued by Navsup Flt Logistics Ctr Yokosuka, targeting the repair and preservation of a single 25UB1308 Utility Boat manufactured by METAL SHARK, LLC. Performance is required at the contractor’s yard with delivery and acceptance occurring at Fleet Activities Sasebo, Japan, and the period of performance runs from September 1, 2026, to December 15, 2026. The work includes hull repairs using AL5086 H116 aluminum alloy, underwater preservation via boat bouncing, zinc anode replacement, installation of an aft curtain, front cabin seat, and new windshield wipers and motors, along with electrical disconnection and reinstallation to facilitate preservation. All work must comply with ASTM B928, MIL-PRF-6855, and NAVSEA Standard Item 009-04, and is subject to periodic and final inspections by a government representative identified post-award, with quality management systems required to meet Government standards and the higher-level requirement of FAR 52.246-11. The contract is subject to stringent compliance with DFARS 252.225-7042, requiring all offerors to be authorized to operate in Japan, and unless already possessing an active U.S. Navy MSRA or ABR agreement in the Japan Region, they must agree to execute such an agreement prior to award. Contractors located outside Japan must unambiguously demonstrate compliance with these geographic requirements; failure to meet this, or any other pass/fail gate—including quoting all items in the solicitation—disqualifies the proposal regardless of price. Award will be made on a lowest total priced basis under a lowest price technically acceptable methodology. Payment is mandatory through electronic funds transfer, with a JPY735 transaction fee deducted by Bank of America, and all invoices must be submitted via WAWF using the Invoice 2in1 format. Contractors must also comply with 29 CFR 1915 shipyard safety standards, extend commercial warranties per NAVSEA guidelines, adhere to U.S. security and OPSEC requirements including HSPD-12 and Executive Order 13467, and ensure employees meet citizenship or residency criteria based on their duties. All offerors must be registered in
The solicitation N6264926Q0373 for the FAS-33 Overhaul is a simplified acquisition issued under the Department of Defense, specifically by Navsup Fleet Logistics Center Yokosuka, targeting repair and preservation services for boat FAS-33 at Fleet Activities Sasebo, Japan. The work is to be performed from September 1, 2026, through December 15, 2026, under a firm fixed price arrangement with payment to be made in Japanese yen using the FY26 budget exchange rate of JPY 150.4415 per USD 1.00. The contract requires full compliance with DFARS 252.225-7042, mandating that all offerors either be located in Japan or unambiguously demonstrate legal authorization to conduct business there. Additionally, all offerors must hold an active U.S. Navy Master Support Agreement (MSRA) or Agreement Below Threshold (ABR) in the Japan Region, or commit to executing one prior to job order award, with failure to meet either requirement rendering the proposal ineligible. Proposals must be submitted electronically via email by the deadline of July 22, 2026, and include a signed SF 33, completed provisions 52.204-8, 252.204-7998, and 252.229-7001, along with a proposal breakdown sheet using Japanese yen. Although labeled a Request for Quotation, offerors must treat this as a Request for Proposal, with submission constituting a legally binding offer.
The technical scope of work includes detailed repair and preservation tasks for FAS-33, including fabrication and installation of a new aft curtain, replacement of one zinc anode and 55 linear feet of rubber fender, installation of two windshield wiper and motor units, surface preparation and coating to SSPC-SP-17 and SSPC-SP-11 specifications using aluminum oxide abrasive blast media, and full compliance with military standards such as MIL-STD-2003B and MIL-STD-1310H. All work must adhere to specified naval technical documents and drawings. The contractor must maintain a government-acceptable quality management system compliant with NAVSEA Standard Item 009-04 and is subject to periodic and final inspections by designated government representatives. Payment
This solicitation, numbered N6264926Q0397, is for the provision of a temporary freezer box and chill box for the USS Rushmore (LSD-47) at Sasebo, Japan, under a simplified acquisition procedure. The work requires delivering one 20-foot freezer box capable of maintaining temperatures between minus 5 to zero degrees Fahrenheit and one 20-foot chill box maintaining temperatures between plus 33 to plus 37 degrees Fahrenheit, with performance obligations beginning October 5, 2026, and concluding July 31, 2027. Contractors must provide daily temperature monitoring and logging at 09:00 and 16:00, perform immediate maintenance and repairs during service, and remove all equipment upon completion. Inspection and acceptance will occur at the destination, with the Government conducting periodic assessments during performance and a final acceptance upon completion. The Contractor must maintain a quality management system compliant with NAVSEA Standard Item 009-04 and comply with 29 CFR 1915 occupational safety standards as if work were performed on U.S. navigable waters, while also adhering to any stricter local Japanese regulations.
Only offerors with an active U.S. Navy MSRA/ABR Agreement in the Japan Region or those who commit to executing one before award are eligible; contractors outside Japan must unambiguously demonstrate compliance with DFARS 252.225-7042, or they will be deemed ineligible. All proposals must quote all items in the solicitation and be submitted electronically via email by the July 29, 2026 deadline, accompanied by signed SF-33 and SF-30 forms, completed provisions including 52.204-8, 252.204-7998, and 252.229-7001, and a proposal breakdown sheet. Offerors must be registered in SAM with up-to-date annual certifications and certify compliance with various representations relating to compensation of former DoD officials, safeguarding covered defense information, and non-traditional defense contractor status. The award will be made to the lowest priced responsible offeror, with price accounting for 100% of the evaluation. Payment will be made via Electronic Funds Transfer through Bank of America, subject to a JPY 735 transaction fee and possible additional bank charges. The contract is
This solicitation, numbered N6264926QE029, issued by the Naval Supply Systems Command Fleet Logistics Center Yokosuka under the Department of Defense, seeks the delivery and installation of an Airman Air Compressor at Sasebo, Japan, with a delivery deadline of 180 calendar days following award. The contract is strictly limited to entities duly authorized to operate and conduct business in Japan, as mandated by DFARS 252.225-7042; contractors with a physical address in SAM outside Japan are ineligible for award, regardless of other qualifications. Eligible contractors must provide official Japanese government documentation—such as a certificate of incorporation, business license, certificate of authority, or articles of organization—to substantiate their legal operating status in Japan. The solicitation is a small business set-aside under NAICS code 333912, and award will be made on a best value tradeoff basis, weighing price and past performance, with authorization to operate in Japan serving as a mandatory pass/fail criterion. The contractor is required to deliver a custom 440V air compressor system with stainless steel (SUS) piping, provide technical guidance for trial runs and maintenance, and submit Japanese and English versions of the oil’s SDS and instruction manual, including a PCB certificate. All items must be marked with a unique item identifier in compliance with MIL-STD-130 and shipped with labels conforming to MIL-STD-129, verified via machine-readable technology. Invoicing must be processed through WAWF using specified DoDAACs, and payment will be made by electronic funds transfer upon submission of the first invoice with valid EFT details. The contractor must ensure all personnel requiring physical access to U.S. military installations are either U.S. citizens or U.S. permanent residents with three or more years of legal residency, comply with OPSEC training requirements, and adhere to trafficking in persons prohibitions. The offeror must complete all required representations and certifications in SAM, respond to specific FAR and DFARS provisions, submit all documentation in English using Japanese currency, and include delivery and incidental costs in unit pricing. Offers are due by 10:00 AM JST on June 30, 2026, and must be submitted via email, fax, hand delivery, or mail to the Sasebo Contracts Division, with full signatures and completed SF 1449 forms.