80 -- Amercoat 235

1 ORDER / QTY: 93 KITS / DESTINATION: STOCKTON, CA / 8010-01-359-7235 UI: KT PAINT SYSTEM, ANTICORROSIVE AND ANTIFOULING, SHIP HULL: In accordance with Military Specification MIL-PRF-24647C, dated September 24, 2001. QPL-24647-6, dated April 14, 2000. Amercoat 235 (235B2163 BAR-RUST 235 Light Gray Base) DV235B20181 Coat 2 for Paint System (For use at temperatures below 40 F, may also be used at temperatures above 40 F) Type I - topcoats of ablative antifouling paints. Class 1A - having copper based toxics Grade A - VOC of antifouling topcoat 400 grams/liter max all other individual paints 340 g/l max Application 1 - having red color antifouling for underwater hull, service life of 5 years. Coat 2 for Paint System (For use at temperatures below 40F, may also be used at temperatures above 40 F) Type I Class 1A Grade A Application 2 - having black color antifouling for waterline (boottop) of hull, service life 5 years VOC: 385 grams/liter maximum Color - Light gray Size: Kit of shipping pail containing 15.1 Liters (4 gallons) Component A and paint can containing 3.78 Liters (1 gallon) Component B in separate containers. Maximum age on delivery shall not exceed four months. Date of reinspection shall be 24 months from date of manufacture. Section 112 of the Clean Air Act [U.S. EPA National Emissions Standard for Hazardous Air Pollutants - 40th Code of Regulations 63.780] specifies volatile organic compound and hazardous air pollutant content limits for compliant shipbuilding and ship repair coatings. Successful offeror shall provide the designated contracting officer representative a certificate of compliance as described in the U.S. EPA "Guidebook on How to Comply with the Shipbuilding and Ship Repair (Surface Coating) Operations NESHAP (EPA-453/B-97-001, January 1997, pages E-18, E-32, E-33). [http://www.epa.gov/ttn/uatw/shipb/shipguid.pdf]. This certificate is based either on known coating characteristics, or the results of EPA Method 24 volatile organic compound tests. Certificates need only be generated once for each applicable coating. When, and if, a supplier reformulates a coating, a new certificate would need to be generated. Suppliers are directed to put the following statements on the paint can labels: 1. A certification that paint in the container meets National Emission Standards for Hazardous Air Pollutants (NESHAP) requirements for shipbuilding and ship repair. 2. A statement of the ration of Volatile content to solids expressed as grams VOHAP per liter of solids. ITEM MARKING: In accordance with Mil-PRF-24647C dated September 24, 2001, page 19, paragraphs 3.10 Marking Requirements, 3.10.1 Special marking, 3.10.2 Container marking. PACKAGING: The components of each kit shall be packaged in multiple friction closure metal cans in accordance with the supplier's normal commercial practice, provided that there will be no interaction chemically or physically with the contents so as to damage the container or alter the strength, quality, or purity of the contents. The containers shall be closed in a manner that will insure that the contents will not spill or leak from the containers during shipment, handling, storage and redistribution. Components of each individual kit shall be further packed together in kit form that will prevent accidental separation of the components during shipment, handling, storage and redistribution. PACKING: Shall be furnished in the units indicated and packaged as follows: Kit Packaging: Ingredients of a product required to be furnished in separate containers shall be packaged according to the manufacturer's normal commercial practice. Such packaged components shall be further packaged or assembled together as a complete unit in kit form. The kit assembly shall be such that it will prevent accidental separation of the components during shipment, handling, storage and redistribution. All containers shall be such that there will be no interaction chemically or physically with the contents so as to damage the container or alter the strength, quality or purity of the contents. One and five gallon cans shall be provided with a bail type handle in accordance with normal commercial practice. The filled containers shall be closed in a manner that will insure that the contents will not spill or leak from the container during shipment, handling, storage and redistribution. MARKING: All unit, intermediate, transport packages and unit loads shall be marked for delivery to civilian activities in accordance with the FED-STD-123G, dated June 6, 1997, or marked for delivery to military activities in accordance with MIL-STD-129N, dated 15, May, 1997, as applicable. PLEASE INCLUDE A COPY OF THE MSDS WITH YOUR BID. ALL BIDS MUST BE SENT TO DIXIE LOGSDON BY COB 05-28-02. THANK YOU!