This Combined Synopsis/Solicitation opportunity from Department Of Defense was posted on May 6, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

ACU-2 Alignment and Preventative Maintenance

Closed

FA930226Q0044Federal

Submission Closed05/15/2026, 07:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 811310

New

Kubota M8200 Clutch Replacement

Solicitation # kubota-m8200-clutch-replacement

Management & Training Corporation is soliciting bids for the clutch replacement of a Kubota M8200 tractor with front wheel assist, no cab or loader, located at the Earle C. Clements Job Corps Center in Morganfield, Kentucky. The contractor is responsible for providing all transportation, labor, supervision, tools, and new manufacturer-specified parts to diagnose and repair the clutch assembly and power take-off system. Key technical requirements include replacing friction discs, bearings, oil seals, and O-rings, as well as resurfacing the flywheel and replacing hydraulic pipes and filters as necessary. Final acceptance is contingent upon the Facility Maintenance Department verifying proper clutch engagement and PTO operation under load. This is a fee-for-service contract awarded on a best-value basis, with a response deadline of November 3, 2026. The solicitation is set aside for small businesses, including VOSB, SDVOSB, WOSB, and HUBZone certifications. Applicants must submit a bid sheet, proof of insurance, a completed supplier packet including Form W-9, and a self-certification form. The contract is subject to various Federal Acquisition Regulations, including Service Contract Labor Standards under Wage Determination 2015-4687 Revision 31 for Kentucky, and strict requirements regarding the security of non-public information and the prevention of trafficking in persons.

Earle C. Clements Job Corps Center

POSTED

DEADLINE

Bus Fire Suppression System Maintenance

Solicitation # WMATA-0000010906

The Washington Metropolitan Area Transit Authority is seeking proposals for the maintenance of bus fire suppression systems under solicitation number WMATA-0000010906. This procurement falls under NAICS code 811310 and is managed through the agency's Virginia operations. The solicitation was posted on October 27, 2026, and requires all responses to be submitted by the deadline of November 4, 2026, at 7:00 PM. Interested parties can access further details and submit their bids through the official WMATA supplier portal.

Washington Metropolitan Area Transit Authority

POSTED

DEADLINE

ANNUAL ROTATING EQUIPMENT INSPECTION, TESTING, REPAIR, RECONDITIONING AND STORAGE SERVICES

Solicitation # 2026-RFP-130

Lakeland Electric is soliciting proposals under RFP 2026-RFP-130 to establish a pool of qualified contractors for the annual inspection, testing, repair, reconditioning, and storage of critical rotating equipment at the McIntosh and Larsen Power Plants. The scope of work covers a wide range of assets, including low- and medium-voltage AC/DC electric motors and circulating water and condensate pumps. Required services include clean inspection tests, troubleshooting, motor rewinding, dynamic field balancing, laser alignment, and vibration analysis. Additionally, the selected contractors must provide logistics support, including pickup, delivery, and secure indoor storage with ongoing preservation activities such as shaft rotation and lubrication. Proposals are due by 3:00 pm on October 30, 2026, via the OpenGov portal. Award decisions will be based on a 100-point scoring system evaluating pricing (30%), qualifications and experience (25%), technical and facility capabilities (25%), service approach and response (15%), and past performance (5%). Mandatory submittals include a signed W-9, Florida Sunbiz registration, a notarized Hold Harmless Indemnification Agreement, and a Human Trafficking Affidavit. Contractors must adhere to strict safety standards, including OSHA regulations for crane operations and powered industrial trucks, and must certify compliance with drug-free workplace and suspension and debarment regulations.

LE - Production - MPP

POSTED

DEADLINE

Airport Baggage Handling System

Solicitation # PUR-RFP2026.08.10068

The City of San Jose is seeking responses from qualified vendors for an Airport Baggage Handling System under solicitation number PUR-RFP2026.08.10068. All proposals must be submitted electronically via Biddingo by December 4, 2026, at 12:00 PM PT. The contract will be awarded based on a best value evaluation rather than price alone, and preference may be given to Local and Small Business Enterprises that maintain an office in Santa Clara County and hold a valid City of San Jose Business Tax Certificate. Vendors are instructed to exclude sales tax from their initial responses, as the city will determine the applicable tax upon award. It is important to note that any quantities provided in the solicitation are estimates and are not guaranteed, meaning variations in volume will not justify adjustments to unit pricing or rates. Further details and required documentation are available through the official solicitation documents and the Biddingo platform.

City of San José - Purchasing

POSTED

DEADLINE

Laboratory Instrument Installation and CalibrationThis subcontract, titled Laboratory Instrument Installation and Calibration, involves the physical installation, setup, and calibration of the THW-L1S system for prime contractors supporting NASA Marshall Spaceflight Center projects. The scope of work includes transporting and positioning equipment within Lab 105E of Building 4205, establishing power and temperature control connections, and performing precise calibrations for volumetric specific heat and thermal conductivity measurements. Managed by the NASA Shared Services Center under NAICS code 811310, the project requires personnel with specific security clearance for access to Building 4205. The final deliverable is a fully commissioned and calibrated system. The solicitation was posted on October 27, 2026, with a response deadline of October 30, 2026.

NASA Shared Services Center

POSTED

DEADLINE

Inspection, Testing, and Repair of Rosemount Model 6888 Oxygen Sensors

260-NETWORK Contract Office 20 (36C260)

POSTED

DEADLINE

Forklift and Utility Vehicle Safety & Maintenance

National Cemetery Administration (36C786)

POSTED

DEADLINE

Heavy Equipment Preventative & Corrective Maintenance

National Cemetery Administration (36C786)

POSTED

DEADLINE

Specialized NDT (Non-Destructive Testing) ServicesThis small business set-aside subcontract involves providing specialized non-destructive testing services for Department of the Army UH-60 helicopter projects. The contractor is responsible for detecting cracks, corrosion, and catastrophic damage using ultrasonic equipment and inspection kits through methods such as X-ray, Magnetic Particle, and Dye Penetrant testing. All work must be performed by personnel holding NAS410 or equivalent certification to ensure the delivery of accurate inspection reports and airworthiness certifications. Managed by the Department of Defense under agency W6QK Acc-Rsa, the opportunity falls under NAICS code 811310. Interested parties must submit their responses by the deadline of December 1, 2026.

POSTED

DEADLINE

Radiator Core & Heat Exchanger RepairThis small business set-aside subcontract, managed by the Department of Defense agency W6QK Acc-Rsa, involves specialized repair, cleaning, and refurbishment of radiator cores and heat exchanger elements. The work supports prime contractors on Department of the Army UH-60 helicopter projects to ensure components meet continued airworthiness standards. Technical requirements include chemical cleaning, pressure leak testing using specialized rigs, brazing, soldering, and fin straightening. The opportunity is categorized under NAICS code 811310 and was posted on October 27, 2026, with a response deadline of December 1, 2026. The selected contractor will be responsible for utilizing industrial cleaning solvents and pressure testing equipment to deliver fully refurbished heat exchangers and radiator cores.

POSTED

DEADLINE

Preventative Maintenance and Repairs

Solicitation # W911KF27QA006

This sole source procurement, solicitation number W911KF27QA006, is awarded to Phillips Corporation for the provision of preventive maintenance and repair services for Haas Computer Numerical Controlled machines. The work will be performed at the Anniston Army Depot in Alabama under the Department of Defense. The presolicitation was posted on October 22, 2026, with a response deadline of December 3, 2026. While this specific action is sole sourced, other organizations possessing the required capabilities may submit written evidence to the contracting officer to be considered for future procurement opportunities.

POSTED

DEADLINE

Material Handling Equipment (MHE) Repair Services

Solicitation # N0018927QL011

Navsup Flt Logistics Ctr Norfolk

POSTED

about 15 hours ago

DEADLINE

in 10 days

AI Contract Overview

This solicitation, identified as FA930226Q0044, seeks commercial services for annual alignment and preventative maintenance of the B1030 Air Conditioning Unit 2 (ACU-2) at Edwards Air Force Base, California. The requirement is issued as a Request for Quote under Simplified Acquisition Procedures and is structured as a 100% Small Business Set-Aside under NAICS code 811310, with a size standard of $12,500,000 in annual receipts. The contract has a five-year potential performance period, consisting of a one-year base period and four one-year option periods, with the Government retaining the right to exercise options without obligation. Offers must be submitted via email as a single PDF document not exceeding 10MB, accompanied by a completed SF1449 form, and must include all mandatory contractor information including SAM UEI, TIN, CAGE code, payment terms, point of contact details, warranty information, and expiration date. The quote must also contain a detailed technical approach demonstrating capability to perform the work in accordance with the Statement of Work, which includes precision laser shaft alignment, vibration and temperature analysis, component inspection, lubrication per manufacturer specs, and post-maintenance verification, with deliverables such as detailed service reports and alignment documentation. The Government will evaluate all offers using the Lowest Price Technically Acceptable (LPTA) methodology, prioritizing price while requiring full technical acceptability as defined by compliance with the SOW. Failure to provide a clear technical approach renders an offer unresponsive. All submissions are subject to the FAR clauses in effect through February 1, 2026, including 52.212-1, 52.212-2, and 52.212-4, and must comply with the System for Award Management registration requirements, prohibitions on inverted domestic corporations and certain subcontracting practices, and representations regarding prohibited entities and defense telecommunications equipment. Contract administration is governed by WAWF for invoicing, with payment terms of NET 30. All work must be performed on-site at Edwards AFB, where contractor personnel must undergo background checks, obtain base access credentials, complete antiterrorism and OPSEC training, adhere to OSHA and environmental regulations, and comply with installation-specific rules such as desert tortoise awareness, FOD prevention, and weapons restrictions. Proposals are due by 12:00 PM

General Info

Annual maintenance of B1030 ACU-2 at Edwards AFB, five-year small business RFQ, LPTA evaluation.

Agency

Department Of Defense → FA9302 Aftc Pzz

NAICS

811310 - Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance

Place of Performance

Edwards, CA, 93524, USA

Set-Aside

SBA

Documents

Solicitation FA930226Q0044 for ACU-2 Baldor Motor Maintenance

rfq

High

Sources Sought Q&A for ACU-2 Alignment and Preventative Maintenance

sources-sought

High

SOW for ACU 2 Alignment and Preventative Maintenance at Edwards AFB

sow

High

Wage Determination 2015-5603 for California Kern County

wage-determination

High

ACU+No.+2+Motor+Data+Plate.jpeg

AI Contract Breakdown

Uniform Contract Format

Timeline

PhaseClosed

PostedMay 6

Combined Synopsis

Response DeadlineMay 15

Deadline has passed

Submission Closed

05/15/2026, 07:00:00 PM UTC

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Defense → FA9302 Aftc Pzz

Contacts2 people available

OfficeEDWARDS AFB, CA, 93524-1185, USA

Organization / AgencyDepartment Of Defense → FA9302 Aftc Pzz

Office AddressEDWARDS AFB, CA, 93524-1185, USA

Contacts

Karla Vazquez

contact@example.gov

JAMIL MINOSA

contact@example.gov

Full Description

This is a Request for Quote (RFQ) Solicitation for the acquisition of Annual B1030 Air Conditioning Unit 2 (ACU-2) Alignment and Preventative Maintenance at Edwards Air Force Base.

(i) This is a solicitation for commercial services prepared in accordance with the format in RFO 5.201(c), as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; quotes are being requested and a written solicitation will not be issued. The Simplified Acquisition Procedures (RFO 12.201-1) will be used for this requirement.

(ii) Solicitation Number: FA930226Q0044 **Please provide the full solicitation number on all packages**

Interested parties who believe they can meet all the requirements for the service described in this solicitation are invited to submit, in writing, a complete quote.

Offerors may utilize the attached SF1449 to complete quote information in addition to a separate quote (in PDF format); ensuring the quote contains information and pricing for all contract line items (CLINs) included on the SF1449. Offerors are required to submit with their quote enough information for the Government to evaluate the requirements detailed in this solicitation. Offerors shall submit quotes via email, please note the maximum file size is 10MB. Emails over this file size will not be received. Submit only written offers; oral offers will not be accepted.

This solicitation is issued as a Request for Quote (RFQ).

(iii) This solicitation document and incorporated provisions and clauses are in effect through the Revolutionary FAR Overhaul effective 01 February 2026.

(iv) THIS REQUIREMENT WILL BE: 100% Small Business Set-Aside. The North American Industry Classification System (NAICS) number for this acquisition is 811310 “Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance” with a size standard of $12,500,00.00.

(v) Period of Performance is 5 years (base year + 4 option years)

(vi) The provision at RFO 52.212-1, Instructions to Offerors--Commercial Products and Commercial Services (Oct 2025), applies to this acquisition. Provisions and clauses can be viewed via internet at Acquisition.gov, https://www.acquisition.gov/.

Offerors shall prepare their quotations in accordance with RFO 52.212-1. In addition, the following information shall be included:

PROVIDE THE FOLLOWING CONTRACTOR INFORMATION WITHIN YOUR QUOTE:

1. SAM UEI:

2. TIN Number:

3. CAGE Code:

4. Contractor Name:

5. Payment Terms (NET 30) or Discount:

6. Point of Contact Name and Phone Number:

7. Email address:

8. Price:

9. Warranty:

10. Date Offer Expires:

11. FOB Destination:

12. Period of Performance Terms:

13. Technical Approach

--------------------------------------------

(vii) The provision at RFO 52.212-2, Evaluation—Commercial Products and Commercial Services (Oct 2025) applies to this acquisition.

***Please read the evaluation criteria closely. If vendor does not provide a full response, it will be found unresponsive***

The solicitation provides that quotations will be evaluated using the Lowest Price Technically Acceptable (LTPA) approach. The award will be made based on the lowest evaluated price of proposals meeting or exceeding the acceptability standards for non-cost factors. The technical acceptability factor contains one non-cost subfactor: (1) Proposal demonstrating a technical approach and capability to complete the required services in accordance with the Statement of Work (SOW). The agency will first rank quotations according to price, from lowest to highest, and will evaluate the lowest-priced quotation as either technically acceptable or unacceptable, reserving the right to evaluate additional quotations for technical acceptability if deemed to be in the best interest of the government.

Evaluation Factors:

Price
Technical Acceptability
1. Subfactors:
  1. Proposal demonstrating a technical approach and capability to complete the required services in accordance with the Statement of Work (SOW). Offerors that do not submit a proposal clearly demonstrating their technical approach will be deemed unresponsive and ineligible for award.

The Government will award a purchase order resulting from the RFQ to a responsible offeror whose quote is responsive to the RFQ and considered to be the LTPA

Options. The Government will evaluate offers for award purposes by adding the total price for all options to the total price for the basic requirement. The Government may determine that an offer is unacceptable if the option prices are significantly unbalanced. The evaluation of options does not obligate the Government to exercise the option(s).

(viii) Offerors shall include complete copies of applicable provisions, which are included in the SF1449. Offers will be considered incomplete if these are not included with the quote.

(ix) The clause RFO 52.212-4, Contract Terms and Conditions—Commercial Products and Commercial Services (Oct 2025), applies to this acquisition.

(x) Additional Contract Requirement or Terms and Conditions: Please find a contemplated list of additional provisions/clauses in the attachments; the final list of clauses is dependent upon actual dollar value of the contract award and may change from those provided in the attachment. Full text for the clauses and provisions can be accessed via https://www.acquisition.gov/

(xi) Defense Priorities and Allocation System (DPAS): N/A

(xii) Quote Submission Information:

It is the government’s intent to award without negotiations. Therefore, each initial quote should contain the offeror’s best terms from a price and technical standpoint. However, the government reserves the right to request clarifications if the Contracting Officer (CO) deems them necessary.

Offers are due on 15 May 2026 at 12:00 PM, Pacific Daylight Time (PDT).

Offers must be sent via email to both Karla Vazquez contact@example.gov AND TSgt Jamil Minosa contact@example.gov. No late submissions will be accepted.

(xiii) For additional information regarding this solicitation contact:

Primary Point of Contact:

TSgt Jamil Minosa

Contracting Officer

contact@example.gov

Secondary Point of Contact:

Karla Vazquez

Contract Specialist

contact@example.gov

QUESTION PERIOD: The period for questions regarding this RFQ will end at 2:00 PM PDT on 08 May 2026. Please send all questions to the primary and secondary POCs listed above. Phone inquiries are not available currently. All questions and answers will be posted to this RFQ.

(xiv) Please note that upon submission of a quote, award is dependent on RFO 52.232-18, availability of funds.

*** This solicitation does not serve as a ﬁnancial obligation for the government. No award should be expected by the contractor and no work may begin unless a fully executed contract document is received by the contractor.