Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

This Sources Sought opportunity from Department Of Health And Human Services was posted on June 24, 2020. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

AGM Batteries

Closed
HHSNCC20-010662Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 811310
New
Kubota M8200 Clutch Replacement
Solicitation # kubota-m8200-clutch-replacement
Management & Training Corporation is soliciting bids for the clutch replacement of a Kubota M8200 tractor with front wheel assist, no cab or loader, located at the Earle C. Clements Job Corps Center in Morganfield, Kentucky. The scope of work requires the contractor to provide all transportation, labor, supervision, tools, and new manufacturer-specified parts to diagnose and repair the clutch assembly and power take-off system. Key technical requirements include disassembling tractor components, replacing friction discs, bearings, oil seals, and O-rings, resurfacing the flywheel, and replacing hydraulic pipes and filters as necessary. The contractor must verify proper clutch engagement and disengagement and test the PTO system under load to ensure the unit is restored to safe operating condition. This is a small business set-aside solicitation with a response deadline of November 3, 2026. Award will be based on best value, and bidders must submit a bid sheet, a completed supplier packet including a W-9 and self-certification form, and proof of insurance. The contract is subject to various federal regulations, including Service Contract Labor Standards under Wage Determination 2015-4687 Revision 31 for Kentucky, and FAR clauses regarding the utilization of small business concerns and combating trafficking in persons. Final acceptance of the work is contingent upon inspection by the Facility Maintenance Department to verify operational functionality and adherence to manufacturer specifications.
Earle C. Clements Job Corps Center

POSTED

about 3 hours ago

DEADLINE

in 3 days
NAICS: 811310
New
SLED
Asphalt Storage Tank Maintenance and Repair
Solicitation # 601320000072188
The Texas Department of Transportation (TxDOT) issued Invitation for Bid (IFB) 601320000072188 in October 2026 for the maintenance and repair of two Duraco Model 8250 asphalt storage tanks located at the Gonzales Maintenance Facility in District 13. The scope of work includes the cleaning of tanks, installation of new manway gaskets and other necessary seals, and the off-site transport and disposal of all removed materials in compliance with Texas Health and Safety Code Chapter 361. All work must be performed according to manufacturer recommendations and applicable standards, with a final inspection required by a TxDOT representative prior to invoicing. Responses are due by November 6, 2026, at 3:00 p.m. Central Time and must be submitted via the Euna Procurement portal. Bidders are required to provide a comprehensive submission including a price schedule in Excel format, qualifications and references, an approach to work, and mandatory certifications regarding child support obligations and legal eligibility. TxDOT will award the contract based on best value, primarily considering purchase price, compliance with specifications, and the risk of vendor non-performance. To pass the initial evaluation, vendors must maintain a performance rating of A, B, or C in the CPA Vendor Performance Tracking System. The selected vendor must adhere to strict insurance requirements, including policies from companies with an A.M. Best rating of A- or better, and maintain confidentiality regarding all TxDOT business information. Payments will be processed electronically in accordance with Texas Government Code Chapter 2251. Additionally, respondents must certify compliance with various state and federal laws, including the Texas Free Enterprise and Antitrust Act and Title VI assurances, while agreeing to prioritize the purchase of Texas-produced materials when available.
Texas Department of Transportation

POSTED

1 day ago

DEADLINE

in 6 days
NAICS: 811310
New
SLED
Conveyance Maintenance Services
Solicitation # 26-1336
Chicago Public Schools is soliciting bids for Conveyance Maintenance Services under solicitation number 26-1336 to implement a comprehensive preventive maintenance program for conveyance equipment. The selected bidder will provide all labor, materials, and supervision necessary to ensure equipment remains safe and operational, adhering to the City of Chicago Municipal Code, ASME A17.1/CSA B44, ASME A17.3, and original equipment manufacturer standards. The contract includes a three-year initial term with the possibility of two automatic renewals of two years each. Services involve monthly preventive maintenance during normal working hours from 6:00 a.m. to 2:30 p.m., as well as 24/7 emergency callback support. Key deliverables include site-specific maintenance schedules, the use of CPS facilities software for reporting, and an annual Executive Summary Report based on a 7-point assessment rubric. The agreement will be awarded to the lowest, responsive, and responsible bidder based on evaluation factors including price, business stability, professional qualifications, past performance, and capacity. Bidders must submit a comprehensive package via Bonfire, including an Excel-based bid tabulation, audited financial statements for the last three fiscal years, three non-Board references, and a W-9 tax form. Compliance with MBE/WBE aspirational goals of 30% and 7% respectively is required, along with adherence to the Illinois Minimum Wage Law and various federal and state non-discrimination acts. Invoicing must be submitted electronically in PDF format, with payments processed according to the Local Government Prompt Payment Act. All shipments are designated as F.O.B. destination. The deadline for questions is November 6, 2026, and the final response deadline is November 20, 2026.
Chicago Public Schools

POSTED

1 day ago

DEADLINE

in 20 days
NAICS: 811310
New
SLED
Annual Inspection/Maint. and Repair on Generator at FMS #8
Solicitation # SRC0000037488
Solicitation SRC0000037488 is for the annual inspection, maintenance, and repair of a Speed Air air compressor (Model 1WD44, SN: D063475) at FMS #8 in Gadsden, Alabama. The scope of work includes replacing belts, collecting oil samples, and installing filters, cabinet filter mats, and repair kits for the oil and thermostatic valves. A mandatory site visit is required on November 18, 2026, at 10:00 AM at 5319 Airport Road, Gadsden, Alabama. The response deadline is November 23, 2026, and all bids must be submitted electronically through the Alabama Buys portal. The contract is managed by the Army MCA and the State of Alabama, with a maximum total value of 25,000 dollars over a potential five-year period, subject to annual renewals. Award evaluation will be based on price reasonableness, cost realism, and supplier qualifications, including professional licenses and insurance. Vendors must comply with the Code of Alabama, including the Beason-Hammon Alabama Taxpayer and Citizen Protection Act and registration requirements for foreign corporations. Payment will be handled electronically via P-cards, EFT, or state-issued credit cards. Final acceptance of services is contingent upon a satisfactory inspection by the State of Alabama in accordance with the Universal Commerce Code.
Army MCA_App 01_Real Property Operations & Maintenance, State Military Department

POSTED

1 day ago

DEADLINE

in 22 days
NAICS: 811310
New
SLED
Electrical & Automation Services
Solicitation # 9181
The City of Denton is soliciting proposals for Electrical and Automation Services to support 12 Wartsila 18V50SG units located at the Denton Energy Center. The selected contractor must ensure all equipment operates within Original Equipment Manufacturer specifications without voiding existing warranties. Key performance requirements include providing personnel and service offers within one week of notice and completing repairs and services within five weeks of evaluation. The City will award the contract based on best value, evaluating submissions through a weighted scoring system: 30% for schedule timeliness, 30% for compliance with specifications, 20% for indicators of probable performance, and 20% for total cost of ownership. Submissions must be made via IONWAVE or hard copy by December 2, 2026, at 2:00 PM CT. Hard copy responses must be sealed, limited to 200 pages, and bound only with staples or binder clips. Required documentation includes proof of Texas state registration, a conflict of interest questionnaire, and a safety record. The contractor must comply with Davis-Bacon prevailing wage rates, the Buy American Act, and ADA non-discrimination practices. Invoicing must be submitted to the City's Accounts Payable department within 30 calendar days of service completion, with payments processed within 30 days of receipt. All deliverables must be shipped with weather-resistant labeling and a packing slip to the designated Denton address.
City Of Denton

POSTED

1 day ago

DEADLINE

in about 1 month
NAICS: 811310
New
SLED
In Shop Overhead Crane Maint Contract
Solicitation # 26-466MIL-ARNFF-B-54424
The Department of Military Affairs for the State of Illinois is soliciting bids under solicitation number 26-466MIL-ARNFF-B-54424 for the maintenance, service, annual inspection, and certification of twenty-eight overhead cranes located at various Army and Air National Guard facilities across Illinois. The scope of work requires the contractor to provide preventative maintenance during regular business hours and emergency services on a 24/7 basis. Key deliverables include annual certifications, load testing, monthly updated maintenance checklists, and quarterly reports detailing all repairs and parts used. All replacement parts must be Original Equipment Manufacturer (OEM) genuine parts, and the contractor must provide a one-year warranty on all materials and workmanship. The contract will be awarded to the lowest priced responsive and responsible bidder. Evaluation factors include price, financial resources, past performance, and the ability to provide required maintenance services. Bidders must submit responses electronically via the BidBuy portal by the November 17, 2026, deadline. Required documentation includes Vendor Disclosure and IPG Active Registered Vendor Disclosure forms. The awarded vendor must maintain comprehensive insurance coverage, including one million dollars in general commercial and auto liability, and comply with prevailing wage laws and the Buy American Act. Funding may be provided through a combination of state and federal sources, and the contract is contingent upon the availability of these appropriations.
ARNFFCLTIES466 - ARNG Facilities

POSTED

1 day ago

DEADLINE

in 17 days

General Info

NAICS

811310 - Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance

Place of Performance

Bethesda, MD, 20892, USA

Set-Aside

SBA

Documents

1
DOCX

AI Contract Breakdown

Uniform Contract Format

Contract not broken down yet

CLEATUS splits the solicitation into Uniform Contract Format (UCF) sections: scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseClosed
Posted

Sources Sought

Response Deadline

Deadline has passed

Submission Closed

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

Show more
AgencyDepartment Of Health And Human Services → National Institutes Of Health - Cc
Contacts1 person available
OfficeBETHESDA, MD, 20892, USA
Office AddressBETHESDA, MD, 20892, USA

Full Description

Show more
THIS IS NOT A FORMAL REQUEST FOR PROPOSAL (RFP) AND DOES NOT COMMIT THE NATIONAL INSTITUTE OF HEALTH, CLINICAL CENTER, OFFICE OF PURCHASING AND CONTRACTS, TO AWARD A CONTRACT NOW OR IN THE FUTURE This is a SOURCES SOUGHT NOTICE to determine the availability of small businesses (e.g., 8(a), service-disabled veteran owned small business, HUBZone small business, small disadvantaged business, veteran-owned small business, and women-owned small business) under NAICS code, 811310, to provide AGM Batteries. Statement of Objective MMESD intends to purchase AGM Batteries, because MMESD has received a mandate from the NIH Clinical Center Safety Committee to replace the existing cell filled batteries with the maintenance free AGM batteries in all material handling equipment (see attached listing of equipment). This replacement is necessary, because of the constant overfilling of the battery cells by operators which creates an overspill of battery Acid onto the building 10 and clinical center floors on the B2 Level. These overspills pose a hazardous threat to the staff and visitors. If this replacement does not take place, the threat mentioned above will continue; which could lead to complaints lodged against the department leadership. Statement of Work The NIH Clinical Center utilizes the material handling equipment in the form of Cushman tuggers and transporters. Also, Raymond electric forklift and order picker, and Unicarrier electric pallet jacks. Contractor Requirements Vendor will be responsible for the removal of existing batteries and debris, through the proper hazardous material disposal IAW state law. Vendor will be responsible for the delivery, installation and training of new AGM batteries and chargers. All training will be coordinated and scheduled with the Project Officer. A complete set of AGM Battery manuals will be provided by the vendor. After installation, any of the new AGM Batteries that are purchased, the vendor will be provide on-hands training within 24 hours. Vendor will provide 8-10 week lead time for delivery and installation of the batteries. Vendor will be available to support any issues with the AGM batteries while still under warranty and service within 24 hours of request. And replace any damaged or nonoperational batteries under warranty, as longs as it is not operator fault. Request for service should be handled via phone Monday-Friday 7:30 AM - 2:00 PM. Service requests after hours, weekend and holidays is not available because the requesting service is closed. If on-site service is required, a vendor representative should arrive the same day or within 24 hours. The vendor will provide the Project Officer copies of all written warranties during the installation. The vendor is responsible for all parts that are under warranty and will ship parts within four days. See Battery and Charger Specifications Below: Item Description Quantity Batteries, Absorbent Glass Mat (AGM) and Gel for replacing cell filled batteries, 8 volt and sealed for Transporters 64 Batteries, Absorbent Glass Mat (AGM) 6 volt sealed for Tuggers 78 Battery, Sealed 36 volt for sit down forklift 1 Batteries, Sealed for electric pallet jacks 24 volt 6 Battery, for Order Picker 24 volt 1 Charger, Onboard for Order Picker 36 volt 3 Charger, for Sit Down Electric Forklift 36 Volt 1 Chargers, for Electric Pallet Jacks 24 Volt 5 Removal, Old Cell Filled Batteries Business information: a. DUNS Number b. Company POC, Phone and Email Address c. Company Address (Company Point of Contact, phone number and email address) e. Type/Size of company, NAICS code, and Social Economic status, as validated at SAMs. f. Current GSA Schedule g. Tax ID Number The synopsis is for information and planning purposes and is not to be construed as a commitment by the Government. This is not a solicitation announcement for proposals and no contract will be awarded from this announcement. No reimbursement will be made for any costs associated with providing information in response to this announcement and any follow-up information requests. Respondents will not be notified of the results of the evaluation. All information submitted in response to this announcement must arrive on or before the closing date. Responses must be submitted to the POC within 12 calendar days (7/6/20) from the date of this synopsis. Responses shall be limited to 10 pages. Attn: Lynda Cole NIH CC OPC 6707 Democracy Blvd Bethesda, MD 20892-5480 PH: +1 (555) 000-0000 E-mail: contact@example.gov

More opportunities from Department Of Health And Human Services → National Institutes Of Health - Cc

Same awarding agency

Earlier notices in this NAICS code

Posted before this notice, open and closed

Find Active Opportunities Like This

Get AI-powered intelligence on the opportunities still open

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS