Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Commercial Packaging & Palletization (RP001 / ASTM D3951)

Active

Federal

Response Deadline08/10/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract requires commercial packaging and palletization of materials in strict compliance with ASTM D3951 and DLA RP001 standards to ensure secure handling and transportation within the military supply chain. All work must meet the rigorous durability, labeling, and containment requirements defined by these standards to guarantee compatibility with Department of Defense logistics systems and to prevent damage during transit under extreme conditions. The scope centers on transforming raw or unpackaged items into standardized, military-ready units that can be efficiently loaded, stored, and moved across global defense distribution networks. This subcontract is issued under NAICS code 561920 and is tied to performance at Fort Hood, Texas, with a zip code of 76544. The solicitation was posted on July 30, 2026, and responses are due by August 10, 2026, giving potential offerors limited time to prepare detailed compliance documentation and proposals. All work must align with the Department of Defense’s Land Supply Chain requirements, emphasizing traceability, environmental resilience, and adherence to federal military packaging protocols. Though no point of contact details or set-aside information is provided, the explicit focus on DLA and ASTM standards indicates a high-stakes operational context where failure to comply could disrupt critical military logistics.

General Info

Packaging and palletization per ASTM D3951 and DLA RP001 at Fort Hood, Texas, for military supply chain compliance.

Agency

Department Of Defense → LAND SUPPLY CHAINView Agency

NAICS

561920 - Convention and Trade Show OrganizersView NAICS

Place of Performance

FORT HOOD, TX, 76544, US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 30

subcontract

Response DeadlineAug 10

Submission deadline

Response Deadline

08/10/2026, 05:00:00 PM UTCin 9 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → LAND SUPPLY CHAIN

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → LAND SUPPLY CHAIN

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Package and palletize the item per ASTM D3951 and DLA RP001 standards to ensure secure military transport and supply chain compliance.

Similar Contracts

Same NAICS industry code

Kitchen Equipment and Mobile Catering SetupThe contract entails the provision and setup of mobile kitchen units, cooking appliances, serving lines, and temporary food service infrastructure at the Devens dining facility to support meal service operations. All equipment and infrastructure must be installed and operational in compliance with military dining standards, ensuring efficient, safe, and scalable food service delivery. The effort is classified as a subcontract under a Small Business Set Aside, meaning only small business concerns are eligible to bid, and the North American Industry Classification System code 561920 applies, which covers support services for food service and other related activities. The performance location is identified as Devens, Massachusetts, with a zip code of 01434, and the Department of Defense through the W7NC Uspfo Activity Me Arng is the overseeing agency. The solicitation was posted on July 31, 2026, with responses due by 5:00 PM on August 26, 2026, and bidders must be prepared to deliver and integrate full-service mobile kitchen systems capable of sustaining high-volume meal operations under temporary or expeditionary conditions.

W7NC Uspfo Activity Me Arng

POSTED

DEADLINE

Marriage Retreat

Solicitation # FA486126R0026

This solicitation, identified as FA486126R0026, is a total small business set-aside under NAICS code 561920 for Convention and Trade Show Organizers, with a size standard of $20 million in average annual receipts. The government is seeking a firm fixed-price contract to execute a three-day Marriage Retreat at Nellis Air Force Base, Nevada, from August 14 to 16, 2026, for up to 60 adults and 30 children. The contractor must secure a lodging facility within 50 minutes of the base that provides 30 double-occupancy rooms, four catered meals for all 90 attendees, a conference space with audiovisual equipment usable daily, and arrange recreational activities including kayaking and golf. All services are detailed in Attachment 1, the Performance Work Statement, and must be delivered FOB destination at the specified Nellis AFB location. Proposals are evaluated under a lowest price technically acceptable methodology, where offerors must achieve at least an “Acceptable” rating on Technical Capability and submit the lowest fair and reasonable total evaluated price, with no trade-offs permitted between technical and pricing factors. The government reserves the right to award without discussions or make no award based on quote quality and price reasonableness. The contract incorporates relevant FAR and DFARS clauses in effect as of March 13, 2026, including those related to safeguarding information, payment procedures, subcontractor responsibility, and prohibitions on certain materials and equipment. Invoicing must be submitted exclusively through the Wide Area WorkFlow system, using electronic methods such as web entry, EDI, or FTP, with payment administered by the Defense Finance and Accounting Service at Nellis AFB. Offerors must be registered in SAM.gov, provide a completed price list, and certify their small business status; additional socioeconomic certifications such as WOSB, EDWOSB, or SDVOSB are optional but not required. No contract value estimate is provided in the solicitation, and no option periods or modifications are indicated. Key points of contact for inquiries include Jaidon Gross and Samuel Toledo, both serving as contracting activity representatives. Inspections and acceptance will be conducted by the government on-site at the designated location according to standards outlined in the PWS, and all proposal submissions must be received by August 4, 2026, at 4:00 p.m. local

FA4861 99 Cons Lgc

POSTED

DEADLINE

AFM Logistic Operations Management Services

Solicitation # FA860126Q0097

This solicitation, FA8601-26-Q-0097, is a combined synopsis and request for quotation for commercial logistics operations management services in support of the annual Air Force Marathon, issued under FAR Part 12 and seeking firm-fixed price contracts. The requirement centers on providing a qualified workforce to manage all aspects of event logistics including setup and teardown of race courses, parking areas, the Health & Fitness Expo, and start and finish line operations across multiple locations at Wright-Patterson Air Force Base, Wright State University’s Nutter Center, and the National Museum of the U.S. Air Force. The contract is structured as a one-year base period with four one-year option periods and a six-month extension option, requiring offerors to include pricing for all periods in their quotations under the specified CLIN structure. The acquisition is full and open competition under NAICS code 561920 with a $20 million small business size standard, and no set-aside is used. Funds are not yet available, and the Government reserves the right to cancel the solicitation without obligation to reimburse offerors. Offerors must submit a single email under the specified subject line, not exceeding five megabytes in size, with no compressed or executable attachments—only .pdf, .doc, .docx, .xls, or .xlsx files are permitted. The quotation must include a completed Required Information Sheet with UEI and CAGE codes, demonstrate compliance with SAM registration requirements, and include aggregate pricing for the base and all option years in whole dollars. Technical acceptability is determined by conformance with the Performance Work Statement, with past performance requiring three relevant prior efforts to be rated acceptable. The Government will make award using the Lowest Price Technically Acceptable method, evaluating proposals based on technical acceptability, past performance, and price reasonableness. Mandatory cybersecurity compliance includes CMMC Level 1 self-certification in SPRS for protection of Federal Contract Information, with flow-down obligations to subcontractors. All offerors must be currently registered in SAM, and proposals must include full descriptions of services to be provided—not pricing alone. Proposals are due by 31 July 2026 at 11:00 AM EDT, with questions required to be submitted by 23 July 2026. The award will be subject to inspection and acceptance at Wright-Patterson Air Force Base, with payment processed through WAWF using the designated DoDAACs.

FA8601 Aflcmc Pzio

POSTED

DEADLINE

RFP 27-11/AB LOVE YOUR CITY EVENTS

Solicitation # RFP-124345

The City of Hampton, Virginia, has issued solicitation RFP-124345 titled RFP 27-11/AB LOVE YOUR CITY EVENTS to solicit proposals for organizing and executing community events that promote civic pride, engagement, and neighborhood vitality across the city. The solicitation was posted on July 14, 2026, with a response deadline of August 11, 2026, at 4:00 PM ET, and is open to entities capable of delivering high-quality, inclusive, and well-managed public events aligned with the city’s goals. All events are expected to take place within the City of Hampton, and proposers must demonstrate experience in event planning, community outreach, and the ability to work collaboratively with local stakeholders. The contract falls under the State, Local, and Education (SLED) category, with Alicia Brown as the designated point of contact for inquiries, reachable via email at alicia.brown@hampton.gov or by phone at 757-727-2196. No set-aside preferences or NAICS codes are specified, indicating the opportunity is open to all qualified vendors regardless of business size or classification. Interested parties must submit their responses through the official vendor portal linked in the solicitation details, ensuring all requirements, timelines, and evaluation criteria are fully addressed. The city seeks innovative, sustainable, and community-driven event concepts that enhance the quality of life for Hampton residents.

City of Hampton

POSTED

DEADLINE

Office of Safer Communities Conference

Solicitation # RFP-125330

The Office of Safer Communities Conference, solicited under RFP-125330 by the Virginia Department of Criminal Justice Services, invites proposals for the planning and execution of an event scheduled for December 2026. The solicitation was posted on July 31, 2026, with a response deadline of August 14, 2026, at 9:00 PM Eastern Time. This procurement is classified under the SLED government type and targets service providers capable of delivering a statewide conference focused on community safety initiatives. Proposals must demonstrate the ability to host the conference across designated regions of Virginia, including Charlottesville, Fredericksburg, and Williamsburg, with the award potentially spanning one or more of these locations. The procurement does not specify a set-aside classification or NAICS code, and full details and submission instructions are accessible through the official vendor portal linked in the solicitation. Inquiries should be directed to Karen Sullivan, the point of contact, via email at karen.sullivan@dcjs.virginia.gov or by phone at 804-786-9047.

Department of Criminal Justice Services

POSTED

DEADLINE

Hazardous Materials Handling & LabelingThis contract requires proper handling and labeling of hazardous materials in strict compliance with DFARS 252.223-7001 and MIL-STD-129, ensuring all hazardous substances are marked, documented, and packaged according to Department of Defense standards. The work is performed under a subcontract with a performance location in Tracy, California, zip code 95304-5000, and is governed by NAICS code 561920, which pertains to other support activities for animal production. The solicitation was posted on July 30, 2026, with a response deadline of August 7, 2026, and is managed by the ASC SUPPLIER OPER OEM DIVISION under the Department of Defense. All submissions must adhere to regulatory labeling requirements to maintain safety, traceability, and contractual compliance throughout the supply chain.

ASC SUPPLIER OPER OEM DIVISION

POSTED

DEADLINE

Hazardous Warning Label Design and ApplicationThe contract requires the design, printing, and application of durable hazard warning labels for hazardous materials, with strict adherence to OSHA 29 CFR 1910.1200 and MIL-STD-129 standards to ensure compliance with federal safety and labeling regulations. The labels must be engineered for long-term durability under demanding environmental conditions and applied accurately to containers and equipment used in military and defense operations. All work must be completed to meet precise technical specifications for content, layout, material, and placement to maintain consistency and regulatory validity across the supply chain. This subcontract is issued by the Department of Defense through the LAND SUPPLY CHAIN organization, with performance required at Fort Hood, Texas, 76544. The solicitation was posted on July 30, 2026, and responses are due by August 10, 2026. The NAICS code 561920 indicates this falls under other support services, likely involving specialized labeling or packaging services. Contractors must be prepared to demonstrate technical capability, compliance history, and the ability to deliver high-volume, high-accuracy labeling solutions on schedule to support critical defense logistics operations.

LAND SUPPLY CHAIN

POSTED

DEADLINE

Radioactive Material LabelingThe contract pertains to the labeling of radioactive components in strict compliance with MIL-STD-129 and DFARS regulations, ensuring proper identification, handling, and documentation of hazardous materials within the Department of Defense supply chain. The work is classified as a subcontract under NAICS code 561920, indicating it involves support services for transportation and material moving, with performance required at Herlong, California, zip code 96113-5520. The solicitation was posted on July 30, 2026, with a firm response deadline of August 6, 2026, leaving a brief window for qualified vendors to submit proposals. The contracting activity is administered by the Medical Supply Chain FSH under the Department of Defense, and the work must adhere to federal standards for labeling radioactive items, including specific markings, data elements, and documentation protocols necessary for logistics, safety, and regulatory compliance.

MEDICAL SUPPLY CHAIIN FSH

POSTED

DEADLINE

Radioactive Materials Notification and Labeling (If Applicable)The contract requires the identification, labeling, and documentation of radioactive materials that exceed established thresholds, ensuring full compliance with MIL-STD-129 and Defense Logistics Agency standards. All work must be performed in accordance with strict federal directives to guarantee safe handling, accurate marking, and proper recordkeeping for defense-related shipments. The scope centers on precise adherence to regulatory protocols for materials that pose radiological risks, with emphasis on uniformity in labeling and traceable documentation throughout the supply chain. This subcontract is issued by the Fluid Handling Division of the Department of Defense, with performance required at a designated location in New Cumberland, Pennsylvania, zip code 17070-5002. The solicitation was posted on July 30, 2026, and responses are due by August 10, 2026. The NAICS code 561920 indicates the work falls under other support activities for transportation, reflecting the logistical and compliance-focused nature of the task. All participating entities must be prepared to meet stringent DLA requirements and deliver verified documentation that confirms compliance with both military and federal radiological safety standards.

FLUID HANDLING DIVISION

POSTED

DEADLINE

NUWC Division Keyport Industry Engagement - Wednesday with the Deputy for Small Business

Solicitation # N00253-26-IE-WWTD

Industry partners are invited to participate in monthly Wednesday sessions hosted by the Deputy for Small Business at the Naval Undersea Warfare Center Division Keyport to explore contracting opportunities and learn how to engage with the command. These hybrid events, held on August 26, September 30, October 28, November 18, and December 16, 2026, from 10:00 a.m. to 11:00 a.m., offer both in-person attendance at Vibe Co-Works in Poulsbo, Washington, and virtual access via Microsoft Teams. The sessions are tailored for businesses with NAICS codes in Construction, Manufacturing, Information, Professional and Technical Services, Administrative and Support Services, Educational Services, and Other Services, with particular emphasis on companies holding the SeaPort Multiple Award Contract. Top NAICS codes of interest include 334511, 541330, 336611, and others related to defense-related manufacturing and technical support. Space for in-person attendance is limited and will be closed once capacity is reached. The event is administered under solicitation number N00253-26-IE-WWTD, with a response deadline of December 16, 2026, and is led by point of contact David Walz. Meetings are subject to change or cancellation.

Naval Undersea Warfare Center

POSTED

DEADLINE

Harborfest at Chula Vista Bayside ParkThe City of Chula Vista will host Harborfest, a free, one-day family-friendly waterfront event at Chula Vista Bayside Park, featuring live music, cultural displays, maritime history exhibits, arts programming, public safety demonstrations, and local recreation activities. The event is expected to draw up to 8,000 attendees and will require two additional days for setup and teardown. The San Diego Unified Port District will provide sponsorship through funding and services, including complimentary parking at Parcel H-23 near the park and free shuttle transportation from the parking area to the event site for all attendees. The event is designed to minimize environmental impact, with no anticipated adverse effects on air quality, greenhouse gas emissions, or transportation and traffic conditions. The applicant is responsible for ensuring full compliance with all federal, state, and local regulations concerning construction and demolition debris, hazardous materials, and stormwater management.

San Diego Unified Port District

POSTED

DEADLINE

RFP-126-2600000479-2 | 2026 Governor's Conf. Energy & Environment Cabinet

Solicitation # RFP-126-2600000479-2

The Kentucky Energy and Environment Cabinet is soliciting sponsorship and exhibit participation for the 2026 Governor’s Conference on Energy & the Environment, with the event scheduled for October 19–20, 2026. This procurement is structured as a non-traditional sponsorship agreement under KRS 45A.097, not a standard federal or state contract, and does not use Federal Acquisition Regulation clauses. The solicitation offers five tiers of participation: Commonwealth Sponsor at $10,000, Goldenrod Sponsor at $6,000, Viceroy Sponsor at $4,000, Cardinal Exhibit at $500, and Agate Exhibit at $200, with strict caps of five sponsors and twenty exhibitors total. The estimated contract value ranges from $10,000 to $60,000 depending on the number and level of selections. Proposals must be submitted electronically via MOVEit by 3:30 p.m. EDT on August 14, 2026, following a revised deadline from the original July 31 date. Offerors are required to submit a Technical Proposal Form and a notarized affidavit confirming compliance with state laws, including disclosure of any tax, labor, or procurement violations over the past five years. Business authorization from the Kentucky Secretary of State is mandatory, and vendors must not claim official sponsorship status. Evaluation is based entirely on technical merit, with no consideration of price. The scoring system allocates 60 points to the partner response, assessing alignment with energy and environmental goals and historical contributions to Kentucky’s development, and 20 points to vendor background, including business history and mission compatibility. Proposals must score at least 50 out of 100 to be considered. Contract administration is overseen by the Energy and Environment Cabinet, with no designated COR, COTR, or PCO identified; inquiries should be directed to Barry Stigers. Acceptance criteria are compliance-based, not technical, requiring adherence to Kentucky’s Civil Rights Act, Title VII, and applicable tax and employment statutes. All disputes are subject to jurisdiction in Franklin Circuit Court. Vendors must maintain good standing in Kentucky, provide access to records for state auditors, and ensure advertising runs for at least seven consecutive days. There are no packaging, transportation, inspection, or delivery requirements as no physical goods are involved; all obligations relate to branding, visibility, and event engagement during the conference.

Energy and Enviroment Cabinet

POSTED

DEADLINE

More opportunities from Department Of Defense → LAND SUPPLY CHAIN

Same awarding agency

Small Business Subcontracting Plan ImplementationThe contract requires support to the prime contractor in fulfilling small business utilization objectives under the Federal Acquisition Regulation provisions FAR 52.219-9 and FAR 52.219-16, which mandate the development and execution of a small business subcontracting plan. This includes performing outreach to small businesses, identifying and securing qualified subcontractors, and ensuring compliance with reporting requirements to demonstrate progress toward established goals. The effort is centered on facilitating meaningful participation of small businesses in the performance of work under the prime contract, with a focus on active engagement and transparent documentation throughout the contract lifecycle. The solicitation is associated with NAICS code 541611, which pertains to management consulting services, and is managed by the Department of Defense through the Land Supply Chain office. The response deadline is August 31, 2026, with the opportunity posted on July 31, 2026. Performance location and point of contact details are not specified, but the work is intended to support defense-related procurement activities. The type of set aside is not indicated, and the contract is structured as a subcontracting support engagement rather than a direct award. All activities must align with federal small business contracting policy and timelines to ensure compliance and accountability.

Administrative Management and General Management Consulting Services

POSTED

about 23 hours ago

DEADLINE

in about 1 month

Cybersecurity Compliance and Incident Response SupportThe contract provides ongoing support for maintaining compliance with NIST SP 800-171 requirements, managing cyber incident reporting procedures, ensuring proper preservation of controlled unclassified information on media, and overseeing subcontractors to ensure adherence to DFARS 252.204-7012. This support is essential for safeguarding sensitive defense information throughout the supply chain and must be delivered in alignment with all applicable federal cybersecurity standards. The work involves continuous monitoring, documentation, and response capabilities to address potential threats and ensure regulatory compliance across all layers of the contract structure. This is a subcontract under the Department of Defense, classified under NAICS code 541512 for computer systems design services, with a submission deadline of August 31, 2026. Performance location and specific agency office details are not specified, but the scope centers on safeguarding controlled unclassified information in alignment with federal mandates. The requirement applies to any subcontractor handling or processing covered defense information, and the contractor must demonstrate established processes for incident detection, reporting, media handling, and vendor compliance enforcement. All activities must be conducted with strict attention to accountability, traceability, and timely response to cybersecurity events as defined by DoD regulations.

Computer Systems Design Services

POSTED

about 23 hours ago

DEADLINE

in about 1 month

Product Verification Testing (PVT) SupportThe contract supports government-conducted Product Verification Testing by providing comprehensive assistance in sample preparation, documentation, and coordination with Defense Logistics Agency testing laboratories, as specified in Section E05. This subcontract is focused on ensuring that all testing procedures align with federal standards and that logistical and administrative tasks are executed accurately to facilitate timely and reliable verification outcomes. The work involves close collaboration with DLA labs to meet technical requirements and maintain traceability throughout the testing lifecycle. The solicitation is posted under NAICS code 541380 and is managed by the Land Supply Chain within the Department of Defense. The opportunity is open for responses until August 31, 2026, with no specific set-aside categories or organization type restrictions indicated. Performance locations are not explicitly defined, but the work centers around DLA testing facilities and requires active coordination with government personnel. Interested parties can access further details through the official DIBBS portal linked in the contract data.

Testing Laboratories and Services

POSTED

about 23 hours ago

DEADLINE

in about 1 month

Packaging, Preservation, and Marking ServicesThe contract requires the provision of military-compliant packaging, preservation, and labeling services for chain assemblies in strict accordance with Defense Logistics Agency standards. This includes the application of accurate barcoding for inventory tracking and full compliance with hazardous communication regulations to ensure safe handling and transport. All work must meet the stringent requirements for military-grade documentation, material protection, and labeling procedures to support logistics and operational readiness. The scope encompasses the full lifecycle preparation of chain assemblies from packaging through final marking, ensuring they are ready for deployment under Department of Defense protocols. This is a subcontract under the NAICS code 493190, issued by the Land Supply Chain division of the Department of Defense, with a response deadline of August 31, 2026. The performance location is not specified, but adherence to federal military logistics standards is mandatory. The solicitation is accessible via the DIBBS platform, and all submissions must comply with the detailed technical and regulatory expectations outlined by DLA without deviation. No set-aside provisions are indicated, meaning the opportunity is open to all qualified subcontractors capable of meeting the military compliance requirements.

Other Warehousing and Storage

POSTED

about 23 hours ago

DEADLINE

in about 1 month

Manufacturing of Chain Assembly, Tire (NSN 2540-12-417-2097)The contract entails the full-scale production of 541 or more units of a specialized chain assembly designed for tire applications, with the National Stock Number 2540-12-417-2097. All phases of manufacturing including material sourcing, fabrication, assembly, inspection, and packaging must adhere strictly to Defense Logistics Agency standards to ensure quality, consistency, and compliance with military specifications. The work is classified as a subcontract under NAICS code 332439, indicating it falls under Other Fabricated Metal Product Manufacturing, and is managed by the Land Supply Chain under the Department of Defense. The solicitation was posted on July 31, 2026, with responses due by August 31, 2026, and performance is expected to be carried out in accordance with DLA requirements, though the specific location of performance is not detailed. The contract does not specify a set-aside type or designated small business preferences, and no point of contact information is provided in the public details.

Other Metal Container Manufacturing

POSTED

about 23 hours ago

DEADLINE

in about 1 month

PLATE, MOUNTING

Solicitation # SPE7L1-26-Q-1419

The contract specifies the procurement of 292 mounting plates identified by NSN 5340-01-578-1311 under solicitation SPE7L1-26-Q-1419, with delivery required within 104 days after award and a firm fixed price structure with no tolerance for quantity variation. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, which supersede any conflicting specifications, and compliance with MIL-STD-130N for identification marking of military property is mandatory. The item must adhere to stringent packaging standards outlined in DLA’s RP001 and MIL-STD-129, with hazardous materials conforming to FED-STD-313 and TQ requirement IP025 while non-hazardous materials must comply with ASTM D3951 under DLA’s overarching authority. Ozone-depleting chemicals are strictly prohibited, and any alternative substances require prior approval unless explicitly authorized by the specification. The product must be sourced from qualified manufacturers listed on approved QPLs or QMLs as referenced in the associated technical documentation, and manufacturing must meet ISO 9001:2015 quality management standards. Inspection and acceptance occur at the destination, with sampling governed by MIL-STD-1916 or ASQ H1331, requiring zero non-conformances unless otherwise stipulated. The item is subject to configuration change management procedures and covered defense information controls, and all packaging must be labeled and palletized per DLA guidelines. Delivery is to the DLA Distribution facility in New Cumberland, Pennsylvania, with transportation logistics governed by DLAD procedural notes C19 and C20. The contract mandates full and open competition and applies to a Federal procurement with a NAICS code of 332722.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 23 hours ago

DEADLINE

CAP, PROTECTIVE, DUST AN

Solicitation # SPE7L1-26-Q-1420

The contract calls for the procurement of 47 protective dust and moisture seal caps with NSN 5340-01-684-3897, supplied by PALL AEROPOWER CORPORATION under part number 62RB114S0000, in compliance with stringent technical and quality requirements referenced from the DLA Master List and specific DLA directives including retention of supply chain traceability documentation per Procurement Note C03. The item is classified as a critical application requiring FAA airworthiness approval, with adherence to Drawing 13873 Rev 016843897 and Quality Assurance Provision 13873, and must meet sampling standards under MIL-STD-1916 or ASQ H1331 with zero non-conformances permitted unless otherwise specified. Packaging, preservation, and marking must conform to MIL-STD-2073-1E and MIL-STD-129, with each unit labeled with the NSN, contract number, lot number, contractor and manufacturer Cage codes, and part number, palletized per DLA packaging requirements. The contract is a firm fixed price with no variance allowed in quantity, and delivery is required within 37 days afteraward date to the DDSP New Cumberland facility in Pennsylvania. Inspection and acceptance occur at destination, and all documentation and traceability must be maintained by the contractor as mandated by DLA directives.

Hardware Manufacturing

POSTED

about 23 hours ago

DEADLINE

Solicitation # SPE7L1-26-T-823H

This contract specifies the procurement of an O-RING with part number KRP203321V-ORING and NSN 5331016878523, requiring a quantity of 176 units to be delivered FOB origin within 44 days of award. The item is classified as a Type I shelf-life item with a non-extendable lifespan of 180 months, governed by RS039 and identified by special marking code 32. All packaging must comply with MIL-STD-2073-1E and MIL-DTL-117, Type II, Class C, Style 1, ensuring the product is sealed in a medium-duty, waterproof, greaseproof, and opaque bag to protect against UV degradation, applicable to direct vendor delivery, foreign military sales, and stock shipments. Marking and palletization must follow MIL-STD-129 and DLA packaging requirements. The delivery destination is DLA Distribution San Diego, with the same address used for freight shipping and parcel post. Inspection and acceptance occur at the destination with zero variance permitted in quantity. The contract references technical and quality standards from the DLA Master List and incorporates requirements for hazardous materials packaging and transportation as per IP025 and DLAD Proc Note C19/C20. The solicitation was issued under SPE7L1-26-T-823H with a response deadline of July 20, 2026, and an original required delivery date of February 3, 2027, though the needed ship date is set for September 3, 2026.

Motor Vehicle Gasoline Engine and Engine Parts Manufacturing

POSTED

about 23 hours ago

DEADLINE

SPRING, HELICAL, TORSION

Solicitation # SPE7L1-26-Q-1422

A solicitation has been issued for 12 helical torsion springs identified by NSN 5360-01-236-0286 under contract number SPE7L1-26-Q-1422, with a response deadline of August 14, 2026, and a posted date of July 31, 2026. The item falls under NAICS code 332613 and is being procured by the Department of Defense through the Land Supply Chain organization, with performance required in Greensboro, North Carolina, 27409. The delivery timeline is set for 193 days after award, and the solicitation is open to federal contracting with no set-aside restrictions specified. Primary point of contact for inquiries is Derek Roberts, reachable by phone at 614-907-3824 or email at derek.c.roberts@dla.mil, and additional details can be accessed via the official DIBBS platform.

Spring Manufacturing

POSTED

about 23 hours ago

DEADLINE

CHAIN ASSEMBLY, TIRE

Solicitation # SPE7L1-26-R-0099

The contract is for the procurement of 541 units of CHAIN ASSEMBLY, TIRE with NSN 2540-12-417-2097, requiring delivery within 120 days after delivery order issuance. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions unless an amendment supersedes it. Packaging must comply with DLA packaging standards, and government identification must be removed from all non-accepted supplies. The use of Class I ozone-depleting chemicals is strictly prohibited in any component or process, overriding any conflicting specification but without waiving product performance requirements; any substitute chemicals require prior approval unless explicitly authorized by the specification. Sampling and inspection must follow MIL-STD-1916 or ASQ H1331 Table 1 or an equivalent zero-based plan, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively; unspecified attributes are deemed major. MIL-STD-105/ASQ Z1.4 may be used to determine sample size, but acceptance requires zero non-conformances unless otherwise stated. The solicitation was issued on July 31, 2026, with responses due by August 31, 2026, under solicitation number SPE7L1-26-R-0099, managed by the Department of Defense’s Land Supply Chain through point of contact Sarah Harmon.

Rubber Product Manufacturing for Mechanical Use

POSTED

about 23 hours ago

DEADLINE

in about 1 month

PLUG ASSEMBLY, SEALING

Solicitation # SPE7L1-26-Q-1417

The contract is for the procurement of four plug assemblies for sealing, identified by NSN 5340-01-324-8500, under solicitation SPE7L1-26-Q-1417, with a response deadline of August 7, 2026, and a required delivery within 202 days after award. The item is governed by DLA packaging and technical requirements incorporated through the DLA Master List of Technical and Quality Requirements, with revisions effective on either the solicitation issue date or award date depending on the acquisition size. Offerors must comply with MIL-STD-130N for identification marking of U.S. military property and source control drawing requirements; only approved sources may supply the item, and non-approved offerors must obtain OEM source approval and submit documentation with their proposal. The technical data associated with this item is subject to export controls under ITAR or EAR, prohibiting unauthorized disclosure or export to foreign persons or entities, including foreign nationals within the U.S. Compliance with DFARS 252.225-7048 is mandatory, and contractors must hold a valid US/Canada Joint Certification Program certification, complete required DOD export control training, and be approved by DLA to access controlled data. Additionally, the contractor must complete a Cybersecurity Maturity Model Certification Level 2 self-assessment. All submissions must adhere to strict data handling protocols, and proprietary information must be safeguarded against unauthorized use or dissemination.

Hardware Manufacturing

POSTED

about 23 hours ago

DEADLINE

Solicitation # SPE7L1-26-Q-1416

The contract pertains to the procurement of 17 units of PLUG, VENT with NSN 5340-01-288-7818 under solicitation SPE7L1-26-Q-1416, with a delivery requirement of 222 days after contract award. Technical data associated with this item is subject to export controls under either ITAR or EAR, meaning any disclosure to foreign persons—regardless of location—is prohibited without prior authorization from the Department of State or Department of Commerce. Only DLA contractors with approved US/Canada Joint Certification Program certification, completion of required DOD export control training, and successful submission of the DLA Export-Controlled Technical Data Questionnaire may access this data. DFARS 252.225-7048 governs compliance with these restrictions, applying uniformly to U.S. companies and their foreign subsidiaries. The procurement is managed by the Department of Defense’s Land Supply Chain, with performance due at Tinker AFB, Oklahoma, and all solicitations must be submitted by August 7, 2026, following a July 31, 2026 posting. Primary point of contact is Vittorio Tambaro, reachable via email and phone provided.

Hardware Manufacturing

POSTED

about 23 hours ago

DEADLINE