Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Crane Services for Shelter Maintenance

Active

Federal

Response Deadline08/24/2026, 07:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract seeks mobile crane services to support the maintenance and repair of FAA shelters across airport facilities nationwide, with specific tasks including the lifting and handling of HVAC units, shelter components, and communication equipment. The work is classified under NAICS code 238990 and is structured as a small business set-aside, reserved exclusively for small businesses as defined by the SBA. Performance is required primarily in Oklahoma City, though services may be deployed at multiple airport locations throughout the country. Interested contractors must respond by the deadline of August 24, 2026, and the opportunity is posted under the Department of Transportation, managed by 6973GH Franchise Acquisition Svcs. This subcontract is open to qualified small businesses capable of providing safe, reliable crane operations under varying site conditions at federal aviation infrastructure sites.

General Info

Small business set-aside for mobile crane services at FAA shelters nationwide, primarily Oklahoma City, due August 24, 2026.

Agency

Department Of Transportation → 6973GH Franchise Acquisition SvcsView Agency

NAICS

238990 - All Other Specialty Trade ContractorsView NAICS

Place of Performance

Oklahoma City, OK, USA

Set-Aside

SBA

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 20

subcontract

Response DeadlineAug 24

Submission deadline

Response Deadline

08/24/2026, 07:00:00 PM UTCin about 1 month

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Transportation → 6973GH Franchise Acquisition Svcs

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Transportation → 6973GH Franchise Acquisition Svcs

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Mobile crane support for maintenance and repair of FAA shelters, including lifting HVAC units, shelter components, and communication equipment at airport facilities nationwide.

Similar Contracts

Same NAICS industry code

T32-D5-Fencing-Candler SR404/I-16-190224The Georgia Department of Transportation is soliciting bids for the Installation, Repair, and Maintenance of Fencing under solicitation number 48400-eRFQ-001825-2027, with a response deadline of August 11, 2026. This procurement is authorized under Georgia state law for services ancillary to public road construction and maintenance, and only contractors previously qualified through the prequalification process for fencing work are eligible to respond. Bidders must fully adhere to the terms and conditions outlined in the Master Material Supply Agreement MMSA 48400-410-000033618 and the ITB/RFQ documentation, and are warned that the Department retains full discretion to modify terms, reject any or all submissions, and waive minor irregularities. The work is scoped for the Candler SR404/I-16 area in Georgia, with Samantha Jones of the Department serving as the primary point of contact for inquiries.

Department of Transportation

POSTED

about 10 hours ago

DEADLINE

Storm Drainage and Culvert InstallationThe contract pertains to the installation of storm drainage piping, catch basins, and culverts designed to manage highway runoff, ensuring proper water flow and erosion control along transportation corridors. This subcontract falls under NAICS code 238990 for other construction-related specialties and is issued by the Department of Defense through the MARITIME SUPPLY CHAIN ESOC BUYS office, indicating it supports military infrastructure or adjacent federal highway systems. The solicitation was posted on July 20, 2026, with a response deadline just three days later on July 23, 2026, suggesting a rapid procurement timeline requiring prompt submission of proposals. The place of performance and point of contact details are unspecified, implying the work location may vary or will be determined post-award, and bidders must review the provided DIBBS link for full technical specifications and requirements.

MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 15 hours ago

DEADLINE

On-Site Assembly and Installation OversightThe contract requires on-site supervision during the assembly and installation of a culvert system for a minimum of three days to ensure full compliance with standards and effective coordination with North Carolina Department of Transportation inspectors. The work is classified under NAICS code 238990 and is structured as a subcontract, with a deadline for responses set for August 3, 2026. Performance of the services is expected to occur at an unspecified location within North Carolina, where the contractor must be present throughout the critical phases of culvert installation to verify adherence to specifications and facilitate seamless communication with NCDOT personnel. The solicitation was posted on July 20, 2026, and all work must be executed under the oversight of the North Carolina Department of Transportation.

Department of Transportation

POSTED

about 15 hours ago

DEADLINE

Traffic Control & Site Safety ManagementThe contract requires the implementation of comprehensive temporary traffic control, signage, flagging, and public safety measures to support urban sewer access and cured-in-place pipe (CIPP) rehabilitation operations. Work must be conducted in alignment with established safety standards to ensure the secure movement of vehicles and pedestrians through active construction zones, with particular attention to minimizing disruptions and protecting public welfare during sewer infrastructure upgrades. All activities must be coordinated to meet operational timelines and maintain compliance with local and state regulations governing roadway safety during utility work. The solicitation is classified as a subcontract under NAICS code 238990, with a submission deadline of September 1, 2026, and was posted on July 20, 2026. The contracting entity is the City of Laurinburg in North Carolina, and the work is to be performed within its jurisdiction, though specific location details are not provided. No set-aside preferences or organizational type restrictions are indicated, and the opportunity is open to qualified subcontractors capable of delivering professional traffic management and site safety services for municipal sewer projects. Interested parties must submit proposals via the provided online portal before the deadline.

City of Laurinburg

POSTED

about 15 hours ago

DEADLINE

in about 1 month

Columbarium Niche Installation – Masonry & StoneworkThe contract encompasses the fabrication and installation of granite or stone columbarium niche units designed for the respectful placement of cremated remains, including all associated masonry and stonework tasks such as precise setting, thorough leveling, professional sealing, and final finishing to ensure durability and aesthetic quality. The work must adhere to strict standards for structural integrity and long-term preservation, with attention to detail in every phase from material handling to final installation at the designated site. This is a subcontract opportunity issued by the State of North Carolina’s Construction Office under NAICS code 238990, with a posted date of July 20, 2026, and a response deadline of August 20, 2026. The place of performance is within North Carolina, though specific location details are not provided, and all work must be completed in compliance with state construction regulations. Interested parties must submit proposals by the deadline through the official state portal linked in the contract data.

State of NC - Construction Office

POSTED

about 15 hours ago

DEADLINE

in about 1 month

Structural and Safety Enhancements (Bollards, Load Capacity)The contract involves the installation of concrete-filled security bollards and the structural reinforcement of records rooms to ensure they can support high load capacity, targeting enhanced physical security and structural integrity. Work will be performed at a location in Boston with a zip code of 02108, and the scope focuses on critical infrastructure improvements to meet safety and security standards. The solicitation is issued as a subcontract under NAICS code 238990, which corresponds to other heavy and civil engineering construction activities, indicating specialized execution requirements. The opportunity was posted on July 20, 2026, with a response deadline of July 22, 2027, providing ample time for qualified subcontractors to prepare and submit their proposals. The contracting entity is the DCP06 - Office of Leasing, based in Massachusetts, though no specific point of contact or set-aside provisions are indicated.

DCP06 - Office of Leasing

POSTED

about 15 hours ago

DEADLINE

in about 1 year

Signage and Wayfinding InstallationThe contract titled Signage and Wayfinding Installation requires the provision and installation of permanent, ADA-compliant signage throughout a facility in Boston, Massachusetts, with a zip code of 02108. All signage must include raised lettering, Braille, and accessible parking labels to meet federal accessibility standards, ensuring full compliance with the Americans with Disabilities Act. The work is classified under NAICS code 238990, indicating it falls under other specialty trade contractors, and is structured as a subcontract opportunity with a response deadline of July 22, 2027. The contracting entity is the DCP06 - Office of Leasing under the Massachusetts agency, and performance is to be completed at the specified location in Boston. There is no set-aside designation provided, and the solicitation does not include a point of contact or detailed address information beyond the city and zip code.

DCP06 - Office of Leasing

POSTED

about 15 hours ago

DEADLINE

in about 1 year

Glass and Glazing Installation (Tempered, Ballistic)The contract requires the supply and installation of tempered and ballistic glass for sidelights, vision panels, and reception areas, ensuring compliance with all applicable safety standards. The work must meet rigorous performance and durability requirements, particularly in high-security zones where impact resistance and security are critical. All materials and installation practices must align with industry best practices for ballistic-rated glazing systems, with emphasis on structural integrity, clarity, and long-term reliability under stress conditions. The contract is classified as a subcontract under NAICS code 238990 and is set for performance at a location in Boston with a zip code of 02108. The solicitation was posted on July 20, 2026, with a response deadline of July 22, 2027. The agency responsible is the DCP06 - Office of Leasing under the Massachusetts government, indicating this installation is for a state-managed facility. Contractors must be prepared to meet strict timelines, deliver certified products, and coordinate on-site installation to ensure minimal disruption to operations in the designated areas.

DCP06 - Office of Leasing

POSTED

about 15 hours ago

DEADLINE

in about 1 year

Storm Drainage and Culvert InstallationThe contract pertains to the installation of culverts, ditches, and storm drainage systems associated with the widening and grading of roadways in Randolph County, Georgia. The work involves the construction and integration of essential drainage infrastructure to support improved roadway capacity and resilience against water accumulation, with all activities tied to broader transportation enhancement efforts. The project falls under NAICS code 238990, classifying it as other heavy and civil engineering construction, and is structured as a subcontract opportunity. The solicitation was posted on July 20, 2026, with a firm response deadline of August 7, 2026, at 7:00 PM local time. While specific details regarding the exact location, point of contact, or set-aside provisions are not provided, the contract is administered by Randolph County under the state of Georgia, with performance expected within the county’s jurisdiction. Interested parties must submit proposals through the official Georgia procurement portal prior to the deadline to be considered for award.

Randolph County

POSTED

about 15 hours ago

DEADLINE

Asphalt Paving and ResurfacingThe contract entails full-depth asphalt resurfacing work on two road segments, encompassing both binder and surface courses to ensure durable, long-term pavement performance. The work is classified under NAICS code 238990 for other construction-related services and is structured as a subcontract opportunity issued by Randolph County in Georgia. The solicitation was posted on July 20, 2026, with responses due by August 7, 2026, at 7:00 PM Eastern Time. All work must be performed at the specified road locations, though exact city and state details for the place of performance are not provided. The contract does not include a set-aside designation and no point of contact information is listed, requiring potential bidders to reference the provided online link for further details and submission requirements.

Randolph County

POSTED

about 15 hours ago

DEADLINE

Stump Grinding & Site RestorationThe contract titled Stump Grinding & Site Restoration involves the post-removal grinding of tree stumps and minor site cleanup to return public areas to a safe and usable condition. Work is required at School Street in Brockton, Massachusetts, with a zip code of 02301, and falls under the NAICS code 238990 for other specialty trade contractors. This is a subcontract opportunity with no specific set-aside designation, intended for qualified subcontractors capable of performing precise stump grinding and environmental restoration tasks. The solicitation was posted on July 20, 2026, and responses must be submitted by August 3, 2026, with no point of contact listed and no agency organization name provided beyond the Massachusetts Procurement Department. The work must meet safety and usability standards for public spaces, emphasizing thoroughness and attention to detail in restoring disturbed areas.

PRO15 - Procurement Department

POSTED

about 16 hours ago

DEADLINE

Building Envelope CommissioningThe contract pertains to the commissioning of the building envelope, requiring comprehensive inspection and performance testing of air and water barrier systems, glazing, and roofing components. The scope includes thermographic scanning to detect thermal anomalies, air leakage testing to assess enclosure integrity, and moisture intrusion verification to identify potential water damage or infiltration pathways. These evaluations are critical to ensuring the building’s long-term durability, energy efficiency, and compliance with performance standards. Work must be completed by the response deadline of August 10, 2026, and the contract is classified as a subcontract under NAICS code 238990, indicating specialized construction services. The solicitation is issued by the Georgia State Financing and Investment Commission, with the procurement being administered through Georgia’s public procurement system, though no specific location or point of contact is provided.

Georgia State Financing and Investment Commi

POSTED

about 16 hours ago

DEADLINE

More opportunities from Department Of Transportation → 6973GH Franchise Acquisition Svcs

Same awarding agency

Crane Equipment and Operator SupplyThe contract is for the supply of certified cranes and qualified crane operators to support on-demand task-order execution, with all equipment required to meet FAA performance specifications for reach, lift capacity, and mobility. The service is scoped to provide fully operational crane units capable of responding promptly to mission-critical needs, ensuring safety, precision, and compliance with federal aviation standards. All crane operators must be properly credentialed and experienced in handling heavy-lift operations under stringent regulatory environments. This is a small business set-aside subcontract under the North American Industry Classification System code 238990, reserved exclusively for small businesses as defined by the SBA. The opportunity was posted on July 20, 2026, with proposals due by August 24, 2026, and performance is expected to be centered in Oklahoma City. The contracting entity is the Department of Transportation through its Franchise Acquisition Services division, and bidders must be prepared to meet rigorous performance and compliance requirements without the use of subcontractors outside the eligible small business pool.

All Other Specialty Trade Contractors

POSTED

about 20 hours ago

DEADLINE

in about 1 month

Crane Services for Cab Glass InstallationThe contract requires high-reach crane operations capable of reaching up to 320 feet with a lifting capacity of 5,500 pounds to perform precision installation of cab glass on elevated air traffic control tower cabs. The work demands specialized skills and equipment to ensure accurate and safe placement of glass components in challenging elevated environments. Coordination with Federal Aviation Administration personnel is essential to align operations with ongoing air traffic control activities and ensure compliance with safety and security protocols. Glazing support services are included as part of the scope to facilitate seamless installation and final finishing of the glass units. This is a small business set-aside subcontract under the SBA Total Small Business Set-Aside program, classified under NAICS code 238990 for other building finish contractors. The solicitation was posted on July 20, 2026, with a response deadline of August 24, 2026, at 7:00 p.m. The place of performance is in Oklahoma City, and the contracting agency is the Department of Transportation operating under the 6973GH Franchise Acquisition Services office. All proposals must demonstrate capability in high-reach crane operations, FAA coordination experience, and proven expertise in precision glazing installation for critical aviation infrastructure.

All Other Specialty Trade Contractors

POSTED

about 20 hours ago

DEADLINE

in about 1 month

Crane Services for Weather Cap InstallationThe contract seeks crane-based installation of weather caps on Air Traffic Control Towers, requiring equipment with a minimum 60-foot reach and 15,000-pound lifting capacity, along with full rigging and certified operator services. All work must fully comply with FAA and OSHA safety and operational standards to ensure mission-critical aviation infrastructure remains protected and functional. The effort is limited to small business concerns under a Total Small Business Set-Aside, classified under NAICS code 238990, and is part of a subcontracting opportunity managed by the Department of Transportation through its franchise acquisition services division. Performance is specifically required in Oklahoma City, with all bids due by August 24, 2026, and the opportunity was posted on July 20, 2026.

All Other Specialty Trade Contractors

POSTED

about 20 hours ago

DEADLINE

in about 1 month

Crane Services with Operator IDIQThe Federal Aviation Administration is procuring a five-year, multi-award Indefinite Delivery/Indefinite Quantity contract for crane services to install weather caps and cab glass on Air Traffic Control Towers and shelters at airport facilities nationwide under a total small business set-aside. This solicitation, identified as 6973GH-26-R-00122, is exclusively reserved for small businesses as defined by NAICS code 238990 with a size standard of $19 million in average annual receipts. All offerors must be registered in SAM.gov prior to award and maintain active registration throughout contract performance and final payment. Proposals must be submitted electronically via email to haylee.p.garcia@faa.gov no later than August 24, 2026, at 2:00 PM CST, with the solicitation number included in the subject line; phone inquiries are prohibited. Pricing will be established at the task order level, and performance is expected across multiple locations including Oklahoma City, Houston, Jacksonville, Phoenix, and others, with the contracting office located in Oklahoma City, OK. Compliance with the Statements of Work attached to the solicitation is mandatory, and proposals must adhere strictly to the instructions in Section L and be evaluated under the criteria outlined in Section M, though specific evaluation factors and weights are not detailed in the available information. Offerors must self-certify as small businesses under NAICS 238990, and failure to meet SAM registration requirements or submit by the deadline will result in disqualification.

All Other Specialty Trade Contractors

POSTED

about 20 hours ago

DEADLINE

in about 1 month

Composite Awareness Training

Other Technical and Trade Schools

POSTED

about 20 hours ago

DEADLINE

in about 1 month

HUM MALSR Demo and ReplacementThe Federal Aviation Administration is soliciting a firm-fixed-price contract for the demolition and replacement of the Medium Intensity Approach Lighting System with Rail (MALSR) at Houma-Terrebonne Airport in Louisiana, under solicitation number 6973GH-26-R-00111. The work encompasses complete removal of the existing MALSR system, shelter, power infrastructure, access roads, and associated components, followed by installation of a new Patriot MALSR system, Runway Alignment Indicator Lights, reinforced concrete foundations, maintenance pads, Earth Electrode Systems, new power distribution components, a fiberglass shelter, and asphalt or concrete access roads, with all site restoration. The contract requires full labor, materials, equipment, tools, transportation, and supplies to be furnished by the contractor and is governed by FAA-specific policies under the Acquisition Management System, not standard FAR provisions. The solicitation is open to small businesses under the 237310 NAICS code with a $45 million size standard. Proposals must be submitted electronically by 3:00 p.m. Central Time on July 24, 2026, following the most recent amendment that extended the deadline from June 19, 2026, and corrected the period of performance to 365 days after Notice to Proceed, while adding pricing options for access road materials and incorporating critical documents such as geotechnical reports, asbestos/lead surveys, and as-built drawings. All offerors must be registered in the System for Award Management with a valid Unique Entity Identifier, certified compliance with all representations and certifications, and must acknowledge all amendments via signed SF30 forms or SIR page acknowledgment to avoid non-responsiveness. Technical proposals are evaluated under a Low-Price, Technically Acceptable basis, requiring all technical elements to meet minimum acceptable standards without trade-offs. Compliance with environmental, safety, and health regulations including 29 CFR, 40 CFR, and 42 CFR is mandatory, along with adherence to FAA security protocols requiring government-issued IDs for site access and prohibitions against unescorted access to FAA facilities or sensitive information without prior suitability clearance. Contractors must secure all permits, submit performance and payment bonds equaling 100% of the contract price, and provide two organizational experience questionnaires detailing similar projects valued at $50,000 or more completed within the past three years. Invoicing must be submitted exclusively through the Delphi web portal via login.gov, and

Highway, Street, and Bridge Construction

POSTED

about 20 hours ago

DEADLINE

MARKET SURVEY SOURCES SOUGHT: QUINT POWER Series Industrial Power SupplyThe Federal Aviation Administration is seeking information from vendors regarding the procurement of 430 units of the Phoenix Contact Quint Power Series Industrial Power Supply, model number 2866789, critical for maintaining operational readiness of mission-critical air traffic control systems. Due to the proprietary nature of the component and the necessity for exact form, fit, and function, procurement is restricted to units sourced directly from Phoenix Contact or through authorized distributors with documented rights to the OEM data. This is a market survey, not a request for proposals, and the FAA will not compensate vendors for any costs associated with responding. Responses are required to include a detailed capability statement proving authorization to supply the component, qualifications to deliver it, manufacturing type, and past performance details on similar contracts. Vendors must also provide a point of contact, current registration in the System for Award Management (SAM.gov), and, if applicable, documentation of 8(a) or service-disabled veteran-owned small business certification. The North American Industry Classification System code is 334419 with a small business size standard of 750 employees. The FAA will use all submissions to evaluate competition, determine an appropriate acquisition strategy, and assess potential for small business set-asides. All responses must be submitted via email to nina.j.musser@faa.gov by July 31, 2026, at 3:00 p.m. CST, with the subject line clearly identifying the survey. Documents should be marked as proprietary, and submission does not constitute an offer or obligation on the part of the FAA.

Other Electronic Component Manufacturing

POSTED

DEADLINE

NOTICE OF INTENT TO SINGLE SOURCE-UNITED STATES TECHNOLOGIES INC.The Federal Aviation Administration plans to award a single-source contract to United States Technologies Inc. for the procurement of ARSR-4 RF Transfer Switches, part number 159C264H01, to maintain and replenish serviceable inventory levels for the ARSR-4 Radar System across eighty-eight sites, including spares. This procurement follows the successful development and testing of a form-fit and functional replacement unit by UST in 2022, which substituted an obsolete and unreparable legacy component; fourteen initial units were acquired, and this purchase will expand stock to ensure sustained operational readiness. The action is authorized under the FAA Acquisition Management System as a single-source procurement due to the proprietary nature of the replacement part and the absence of viable alternatives, with no competitive solicitation being issued. The effort falls under NAICS code 334511 for aeronautical system manufacturing and is being executed by the FAA’s Mike Monroney Aeronautical Center in Oklahoma City. Interested parties may submit written inquiries to Contract Specialist Nina Musser by 3 p.m. on July 24, 2026, though this notice serves only as an informational announcement and not a formal solicitation.

Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

POSTED

DEADLINE

Replacement UV-Blocking Protective Mesh Screen CurtainsThe FAA is seeking qualified vendors to provide UV-blocking protective mesh screen curtains for outdoor storage bays at the Mike Monroney Aeronautical Center in Oklahoma City, Oklahoma, to safeguard National Airspace System equipment and other FAA assets. This market survey aims to gather information on industry capabilities to determine whether the procurement will be conducted as a full-and-open competition or set aside for small businesses, service-disabled veteran-owned small businesses, or SBA-certified 8(a) socially and economically disadvantaged businesses. The requirement is classified under NAICS code 314999 with a small business size standard of 550 employees. Respondents must submit a detailed capability statement including past performance on similar curtain replacements, years in business, and a list of current government contracts; they must also provide a point of contact, proof of active SAM registration, and, if applicable, SBA 8(a) or SDVOSB certification documents. All submissions must be received by 2:00 p.m. Central Time on July 29, 2026, emailed to connie.m.houpt@faa.gov with the exact subject line specified. Offerors are reminded that SAM registration is mandatory for award, performance, and final payment. Proprietary information should be clearly marked, and while submissions are not publicly released, vendors are encouraged to provide feedback on the government’s approach. Additional support for small, minority, and women-owned businesses is available through the DOT Short Term Lending Program, which offers working capital loans up to $750,000 for transportation-related contracts.

All Other Miscellaneous Textile Product Mills

POSTED

DEADLINE

AC-26-03745 - ASR-9 Beacon Cable KitThe Federal Aviation Administration is seeking small business vendors to supply conversion kits for upgrading the Air Traffic Control Beacon Interrogator systems at ASR-9 radar facilities as part of the broader Radar System Replacement Program. These kits, developed by AJW-1433, are designed to replace existing rotary joint configurations with new beacon cable assemblies that align with the Mode Select Beacon System (Mode-S) architecture, enabling compatibility with the Brand-New Air Traffic Control System. The current rotary joints lack the necessary signal paths for integration into the modernized RSR infrastructure, making this modification essential for operational continuity and system interoperability. The solicitation, identified as AC-26-03745-ASR-9_Beacon_Cable_Kit, was posted on July 14, 2026, with responses due by August 4, 2026. This procurement is designated as a total small business set-aside under SBA guidelines, with the North American Industry Classification System code 517810. The contract is managed by the Department of Transportation’s Franchise Acquisition Services office located in Oklahoma City, Oklahoma, and the work will be performed at ASR-9 sites across the country, with the primary point of contact being Raymond Lena of the FAA. Vendors must meet small business eligibility requirements and be prepared to deliver kits that fully meet the technical specifications for retrofitting existing ATCBI-5 systems.

All Other Telecommunications

POSTED

DEADLINE

DESIGN ARSR4 POWER AMP MODULE TEST STATIONThe Federal Aviation Administration’s Mike Monroney Aeronautical Center is soliciting proposals to design, develop, fabricate, test, and deliver a replacement Air Route Surveillance Radar (ARSR4) Power Amplifier Module Test Station (PAMTS), along with a dedicated interface adapter fixture, test software, and repair procedures to support the testing and repair of two ARSR4 power amplifier module boards. This requirement is classified under NAICS code 335311 with a small business size standard of 800 employees, and full-and-open competition is authorized. The contract calls for one production PAMTS unit with part number KA421400G01 and a corresponding PAM interface adapter fixture with part number AD421410G01, with deliverables requiring compliance with specific electrical and mechanical performance standards matching or exceeding the legacy system, operating within the frequency range of 1215 MHz to 1372 MHz and excluding 1400 MHz measurements. The contractor must provide comprehensive technical documentation including non-proprietary schematics, block diagrams, parts lists, theory of operation, and a datasheet, and must adhere to ANSI/ASQC/ISO 9000 quality system certification and applicable IPC workmanship standards. All work is to be performed on the contractor’s premises and delivered F.O.B. destination to the FAA Logistics Center in Oklahoma City, Oklahoma. Proposals must be submitted exclusively via email to connie.m.houpt@faa.gov no later than August 4, 2026, at 2:00 PM Central Time, with the solicitation number 6973GH-26-R-00164 clearly included in the subject line. Offerors must execute and include a Screening Information Request comprising Sections A, B, F, and K of the solicitation, along with any necessary Small Business Subcontracting Plan, and must be currently registered in SAM.gov with a valid Unique Entity Identifier. All submissions must affirm the accuracy of SAM representations and certifications, and contractors are required to comply with provisions governing organizational conflicts of interest, prohibition of contracting with inverted domestic corporations, supply chain security, Buy American Act preferences, anti-discrimination, trafficking in persons, and records management. Invoicing must be submitted through the FAA’s Delphi eInvoicing portal via login.gov, with no facsimiles, emails, or scanned documents accepted. Payment will be awarded to the responsible offer

Power, Distribution, and Specialty Transformer Manufacturing

POSTED

DEADLINE

AC-26-03764 - ATCBI-5 Encoder Mod KitThe Federal Aviation Administration is seeking small business suppliers to provide conversion kits for upgrading the Air Traffic Control Beacon Interrogator ATCBI-5 systems at ASR-8 radar facilities as part of the broader Radar System Replacement Program. The existing rotary joints at these sites lack the necessary signal paths to interface with the new Brand-New Air Traffic Control System architecture and must be modified to match the configuration used at sites equipped with Mode-S beacon systems. The required kit, developed by AJW-1433, adds a critical additional signal path to enable compatibility with ASR-8 rotary joint encoders, ensuring seamless integration with the upgraded infrastructure. The solicitation, identified as AC-26-03764-ATCBI-5_Encoder_Mod_Kit, was posted on July 14, 2026, with responses due by August 4, 2026, and is designated as a Total Small Business Set-Aside under SBA guidelines. The NAICS code 517810 applies to this procurement, and all work will be performed in Oklahoma City, Oklahoma. The contract is managed by the Department of Transportation’s Franchise Acquisition Services office located in Oklahoma City, with Raymond Lena serving as the primary point of contact for inquiries. The initiative supports modernization efforts under the RSR Program, ensuring legacy radar systems remain operationally viable within the next-generation air traffic control environment.

All Other Telecommunications

POSTED

DEADLINE