Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, September 30 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

DOT Certified Shell Road Base Supplier

Active

State & Local

Response Deadline10/16/2026, 02:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

General Info

Agency

Florida Fish and Wildlife Conservation CommissionView Agency

NAICS

423860 - Transportation Equipment and Supplies (except Motor Vehicle) Merchant WholesalersView NAICS

Place of Performance

FL, USA

Set-Aside

NONE

Documents

This scope was carved out of FWC 26/27-30.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

Babcock Ranch Preserve Road Work

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedSep 16

subcontract

Response DeadlineOct 16

Submission deadline

Response Deadline

10/16/2026, 02:00:00 PM UTCin 28 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyFlorida Fish and Wildlife Conservation Commission

ContactsNo contacts available

OfficeN/A

Organization / Agency

Florida Fish and Wildlife Conservation Commission

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supplies and delivers DOT certified shell road base material for prime contractors on Florida Fish and Wildlife Conservation Commission (FWC) road work projects. Provides Code B02 Bank Run Shell Base and manages the delivery of approximately 240 loads to the project site. Material must meet DOT certification standards. Delivers 5,280 tons of shell road base material.

Similar Contracts

Same NAICS industry code

MOTOR, WIPER ASSEMBLY, RETROFI | 2101014

Solicitation # 2101014

Solicitation 2101014 is issued by the Dallas Area Rapid Transit Authority for the procurement of a motor wiper assembly retrofit. The solicitation was posted on September 17, 2026, with a response deadline of September 24, 2026. All bids must be submitted via the Bonfire portal and must reflect FOB Destination shipping terms, with all freight costs included in the overall price. Delivery timing and rates are critical, as failure to meet specified schedules may result in rejection or termination for default. Payment terms are Net 30, with invoices paid 30 days from the receipt of the invoice or the order, whichever is later. Invoices must be submitted in triplicate to the designated email address and include the purchase order number, item number, description, quantities, and extended totals. The Authority maintains the right to terminate the order for default if the seller fails to perform within specified time periods, making the seller liable for reprocurement costs. Additionally, the seller must certify that they do not boycott Israel and are not associated with foreign terrorist organizations as identified by the Texas Comptroller.

Dallas Area Rapid Transit

POSTED

DEADLINE

TES OCS Specialized Equipment

Solicitation # 2097621

Solicitation 2097621 is a supply contract issued by the Dallas Area Rapid Transit (DART) for the procurement of specialized Hi-Rail vehicles to support the maintenance and renewal of the Overhead Catenary System (OCS). The scope of work requires the delivery of two Hi-Rail Platform Trucks and two Hi-Rail Bucket Trucks. These dual-mode vehicles must be road-worthy and rail-bound, complying with Federal Railroad Administration (FRA), AAR, and OSHA standards. The contract has a performance term of nine months, with all deliveries made F.O.B. destination to a designated facility in Dallas, Texas. Award will be granted to the responsible bidder based on price and other price-related factors, provided the offer meets all minimum technical criteria. The contractor must provide performance and payment bonds executed by a surety licensed in Texas, as well as a Commercial General Liability insurance limit of 5 million dollars. Acceptance of the equipment is contingent upon successful Factory Acceptance Testing (FAT) at the manufacturer's facility and subsequent Site Acceptance Testing (SAT) at a DART-designated location. Required deliverables include comprehensive operator and maintenance manuals, electrical and hydraulic schematics, and as-built drawings provided in English.

Dallas Area Rapid Transit

POSTED

DEADLINE

Colfax Curved Rail Replacement and Spare, Materials only

Solicitation # IFB 226DR014

The Regional Transportation District (RTD) issued Invitation for Bid IFB 226DR014 on September 17, 2026, for the procurement of track materials to support the replacement of a curved light rail track section under the Colfax bridge near the Auraria West Station in Denver, Colorado. This fixed-price contract is for materials only and requires the supply of pre-curved running and restraining rail for curves TAC2 and TBC3, including spirals, as well as four single-rail and four double-rail insulated joint kits. All rail materials must be new premium or standard high strength 115 RE steel conforming to AREMA standards, and insulated joints must be from approved manufacturers such as Allegheny Rail Products, American Track Systems, Portec, or Railway Bonded Insulated Joints. Bids are due by 2:00 pm on October 6, 2026, via RTD's online procurement portal. The contract will be awarded to the responsive, responsible low bidder, with evaluation focusing on pricing, organizational conflict of interest certifications, and compliance with submission instructions. Deliverables include the physical materials and shop drawings for approval, with all items delivered FOB to the RTD CML Storage Yard by December 31, 2026. Bidders must certify compliance with prevailing wage requirements and provide a W9 and key personnel documentation. While there is no specific SBE participation goal, bidders are encouraged to document their efforts to include small business enterprises in the project.

Rail Operations

POSTED

DEADLINE

Supplier of Packing with Retainer (NSN 5330-01-178-3727)

LAND SUPPLIER OPNS VEHICLE SPT

POSTED

DEADLINE

HELM CHAIR PURCHASE

Solicitation # 15254PR260000369

The Department of Homeland Security, specifically Base Honolulu, is soliciting quotes for the purchase of four NORSAP 1600 Standard S Aluminum Back helm chairs or an equivalent model. The required specifications include a 670-800MM size, Pearl Black color, and a weight capacity of 255 lbs, identified by item NS8610. The items are to be delivered to the US Coast Guard Base Honolulu at 400 Sand Island Parkway, Honolulu, HI 96819, for the CGC Hollyhock. This solicitation, numbered 15254PR260000369, was posted on September 17, 2026, with a response deadline of September 24, 2026. The procurement falls under NAICS code 423860 and is not subject to any specific set-aside restrictions. Vendors are required to provide an estimated shipment and delivery date within their quotes. Primary contact for this requirement is Kolt Joseph, with secondary support provided by David W. Kelii.

Base HONOLULU(00034)

POSTED

DEADLINE

16.0 CU YD Truck-Mounted Spreader Supply

KYTC - Div of Equipment

POSTED

DEADLINE

Wheel. steel used on bus

Solicitation # 2139037

The MTA-NYC Transit (NYCT) is soliciting bids under solicitation number 2139037 and contract number 0000562593 for the procurement of steel wheels used on buses. This opportunity was posted on September 15, 2026, with a response deadline of October 15, 2026, at 11:00 AM. The contract term is established for 12 months, and the place of performance is listed as state-wide within New York. Interested vendors must submit their proposals to the MTA-NYC Transit Bid Reception Desk located at 3 Stone Street, Ground Floor, New York, NY 10004. Primary contact for the solicitation is the NYCT Bid Reception Desk, reachable via email at vreplies@nyct.com or by phone at 646-252-6101. Notably, Gillig LLC has been identified as a business enterprise that was awarded an identical or substantially similar procurement contract within the past five years.

MTA - NYC Transit (NYCT)

POSTED

DEADLINE

INVITATION FOR SALE - Surplus Sale - Ground Support Equipment (GSE) & Miscellaneous Related Items

Solicitation # 2026-035-ITS

The Sanford Airport Authority is soliciting sealed bids for the purchase of a single lot of surplus Ground Support Equipment and miscellaneous related items located at Orlando Sanford International Airport. The inventory includes baggage tractors, beltloaders, tow tractors, and various ramp items such as radios and headsets. All items are sold on an as-is, where-is basis with all faults and without warranties. The contract will be awarded to the highest responsive and responsible bidder who meets or exceeds the minimum reserve price of 400,000 dollars. Bids must be submitted by September 24, 2026, and must include a completed Respondent Questionnaire and proof of legal organization. The successful bidder is required to submit a 10 percent deposit within five business days of the Notice of Intent to Award, with full payment due within ten calendar days of the Notice of Award. Payment must be made via certified check, cashier's check, wire transfer, or ACH. Following full payment, the purchaser must submit a removal plan within five calendar days and complete the removal of all equipment from airport property within 30 calendar days. The purchaser assumes all responsibility for labor, transportation, and logistics costs. Additionally, the bidder must provide evidence of comprehensive insurance, including Commercial General Liability and Workers Compensation, and must comply with all airport safety and security regulations.

POSTED

DEADLINE

Solicitation # W8476-26M419/A

The Department of National Defence is seeking to procure fourteen EMD Forklifts with various configurations for delivery to Canadian Forces Base Dundurn, Trenton, and Borden. The required delivery timeline is 180 days following the award of the contract. This solicitation is restricted to suppliers who hold a Supply Arrangement under RFSA E60HS-21FRKL. Interested offerors must submit their proposals via email to the designated receiving address by the deadline of September 23, 2026. The procurement process allows for submissions in either official language of Canada, and the Crown maintains the right to negotiate with suppliers. Primary contact for this requirement is Contracting Authority Marie-Eve Bouchard.

Department of National Defence

POSTED

DEADLINE

Spare Parts for Airfield Ground Support Equipment 2

Solicitation # W8486-270982/A

The Department of National Defence has issued a notice of proposed procurement for various spare parts intended for Airfield Ground Support Equipment. The requirement includes a diverse range of components such as bushings, filler opening caps, linear actuating cylinders, filters, vehicular heaters, horn buttons, window washer nozzles, leaf spring shackle pins, electrical solenoids, speed switches, gas springs, engine starters, switches, and vehicular windows. These items are to be delivered to the Canadian Forces Supply Depots in either Edmonton, Alberta, or Montreal, Quebec, with a requested delivery deadline of December 31, 2026. Prospective offerors must submit their bids in Canadian dollars, ensuring that prices exclude applicable taxes but include all delivery costs, Canadian customs duties, and excise taxes. Submissions must be made electronically via email to the designated receiving address. While specific part numbers and NCAGE codes are provided, suppliers proposing equivalent or substitute products must clearly identify the brand name, model, part number, and NCAGE of the offered item. The Crown maintains the right to negotiate with suppliers, and offerors may request a debriefing regarding the solicitation results within fifteen business days of receiving the outcome.

Department of National Defence

POSTED

DEADLINE

Aviation Maintenance Parts IDIQThe Department of State, through the Bureau of International Narcotics and Law Enforcement Affairs, is establishing an Indefinite Delivery, Indefinite Quantity contract for aviation maintenance parts. This initiative is designed to create a more efficient and cost-effective sourcing mechanism for the procurement of aviation parts and related services, with the primary place of performance located in Bogota. Classified under NAICS code 423860, this forecast was posted on September 1, 2026. Jamillah Timmons serves as the primary point of contact, with Tyler Sinclair acting as the Small Business Specialist for the requirement.

BUREAU OF INTERNATIONAL NARCOTICS AND LAW ENFORCEMENT AFFAIRS

POSTED

DEADLINE

26-04060TD S70 MT & CT HPU Overhaul Material IFB

Solicitation # 26-04060TD

The Utah Transit Authority (UTA) has issued a firm fixed-price Invitation for Bids (IFB) to procure materials necessary for the overhaul and update of Hydraulic Power Units (HPUs) for its fleet of 77 Siemens S70 Light Rail Vehicles. The objective is to ensure reliable service for an additional 15 years through the replacement of wearable items and pump motors, with the actual overhaul work to be performed by UTA personnel. The contractor is required to provide materials packaged as complete kits; individual parts will not be accepted. Specifically, the procurement includes Kit A for Motor Truck HPUs, Kit B for Non-Power or Center Truck HPUs, and Kit C for updating MT/CT HPUs with Interface Blocks and pump motor half-life replacements. All parts must meet or exceed OEM specifications, maintenance manual requirements, and the standards detailed in the solicitation. Bids are due by October 8, 2026, at 3:00 pm via the Euna portal, and the award will be granted to the lowest responsive and responsible bidder based on the bid price of the parts. To be considered responsive, submissions must include a technical bid limited to 25 pages, a bid sheet, and all required signed forms and certifications. The contractor must maintain a Quality Assurance Program and provide completed test documents to certify that all materials meet specifications prior to delivery, which is FOB to a UTA-designated destination. This contract includes strict compliance with federal regulations, including the Build America, Buy America Act, ADA standards, and record retention requirements under 2 C.F.R. § 200.334. Payment for approved invoices will be issued within 30 calendar days of submittal.

POSTED

DEADLINE

More opportunities from Florida Fish and Wildlife Conservation Commission

Same awarding agency

Dinner Island Ranch WMA Canal Cleaning and Maintenance

Solicitation # FWC 26/27-27

POSTED

about 3 hours ago

DEADLINE

in about 1 month

Cypress Tree Trimming and PruningThis subcontract involves specialized cypress tree trimming and pruning services for prime contractors working on Florida Fish and Wildlife Conservation Commission projects. The scope of work requires trimming all cypress tree limbs to a minimum height of 15 feet above the ground, cutting back to the trunk or branch using aerial lifts and professional tree trimming equipment. All work must adhere to the specific tree preservation markings provided by the FWC Project Manager. The services are to be delivered along a 36-mile fire line corridor. This opportunity falls under NAICS code 561730 and was posted on September 17, 2026, with a response deadline of October 17, 2026.

Landscaping Services

POSTED

DEADLINE

Fire Line Installation and Surface PreparationThis subcontract for the Florida Fish and Wildlife Conservation Commission involves the installation of 36 miles of fire lines. The scope of work requires the removal of debris, stumps, and roots using a root rake to create a 30-foot clearing, followed by the establishment of a 16-foot disked center line. To ensure proper vehicle access, the contractor must perform leveling, grading, and rolling of the surface utilizing box blades, rototillers, and disk harrows. All operations must be conducted in strict compliance with established wetland guidelines. The project is categorized under NAICS code 237990, with a response deadline set for October 17, 2026.

Other Heavy and Civil Engineering Construction

POSTED

DEADLINE

Right-of-Way Vegetation ClearingThis subcontract involves performing vegetation clearing for prime contractors on Florida Fish and Wildlife Conservation Commission projects. The scope of work requires the use of bulldozers and forestry mulchers to establish a 50-foot wide right-of-way along area boundary lines, totaling approximately 2 miles of cleared vegetation. The contractor must ensure full compliance with federal, state, and local wetland disturbance guidelines and coordinate all operational activities around quota hunt dates. This project falls under NAICS code 115310, with a response deadline of October 17, 2026.

Support Activities for Forestry

POSTED

DEADLINE

Okaloacoochee Slough WMA Fire Line Installation

Solicitation # FWC 26/27-24

The Florida Fish and Wildlife Conservation Commission is soliciting competitive bids for fire line installation and vegetation clearing at the Okaloacoochee Slough Wildlife Management Area in Hendry County, Florida. The scope of work requires the contractor to clear approximately 2 miles of vegetation to establish a 50-foot right-of-way and install approximately 36 miles of fire lines, consisting of a 30-foot-wide root rake line with a 16-foot-wide disked line centered within it. The final surface must be cleared, smoothed, leveled, and rolled to accommodate wheel drive vehicles and meet prescribed burning standards. All work must be performed outside of established quota hunts and comply with federal, state, and local guidelines regarding wetland disturbance. The contract will be awarded to the responsive and responsible bidder offering the lowest price. Bidders must be registered in the MyFloridaMarketPlace and SunBiz systems and submit sealed physical bids by October 17, 2026; digital submissions are not accepted. Mandatory requirements include the submission of a price sheet, an ITB acknowledgement form, and at least three references for similar projects. The period of performance begins within 30 days of the purchase order issuance and must be completed by June 30, 2027. Compliance will be verified through on-site and aerial measurements by the FWC Project Manager. The contractor must also adhere to various regulatory standards, including the Davis-Bacon Act, the Copeland Anti-Kickback Act, and Florida statutes regarding employment eligibility and scrutinized companies.

Support Activities for Forestry

POSTED

DEADLINE

Road Base Installation and Grading Contractor

Highway, Street, and Bridge Construction

POSTED

DEADLINE

Babcock Ranch Preserve Road Work

Solicitation # FWC 26/27-30

The Florida Fish and Wildlife Conservation Commission is soliciting competitive bids for road work at the Babcock Ranch Preserve near Punta Gorda, Florida. The project involves the supply, delivery, spreading, and grading of approximately 5,280 tons of DOT certified shell road base material, specifically Code B02 Bank Run Shell Base, to be applied to Tram Grade and Cutoff. The estimated budget for this one-year contract is 163,700.00 dollars, with the performance period scheduled from February 1, 2027, through May 31, 2027. The contract will be awarded to the responsive and responsible bidder offering the lowest total price. To be eligible, vendors must be registered in the MyFloridaMarketPlace and SunBiz systems and provide Florida Department of Transportation Material Certification. Key requirements include a performance bond, insurance documentation, and compliance with the Davis-Bacon Act and Build America, Buy America provisions. Delivery is subject to weather restrictions and must maintain a volume between 25 and 100 loads per day. Final payment is contingent upon a written confirmation of acceptance by the Commission and the submission of a notarized Certificate of Contract Completion.

Highway, Street, and Bridge Construction

POSTED

DEADLINE

Miami-Dade Tegu Removal - 13 Trap Lines

Solicitation # FWC 26/27-09

The Florida Fish and Wildlife Conservation Commission has awarded solicitation FWC 26/27-09 to Blue Iguana Pest Control for the Miami-Dade Tegu Removal project. This contract involves managing 13 trap lines across selected public lands in Miami-Dade County, including locations such as Card Sound Road, Tallahassee Road, and various canals. The scope of work requires the contractor to capture Argentine black and white tegus, collect morphometric data, submit high-resolution photographs, and perform humane euthanasia and carcass disposal at approved sites like the South Dade Landfill. The contract is for an initial one-year term with fieldwork scheduled from February 1, 2027, through October 31, 2027, with a potential one-year renewal option. The awarded bid price is $17,400 for the base period. To qualify for the award, the contractor was required to demonstrate at least three years of experience in invasive wildlife trapping and technical data management, including the use of GPS and ArcGIS. The contract mandates strict adherence to humane killing standards and requires the contractor to maintain necessary permits and insurance, including General Liability and Worker's Compensation. Administrative requirements include registration in the MyFloridaMarketPlace system and compliance with various state and federal regulations, such as the Build America, Buy America provision and accessibility standards. Payments are processed monthly via Electronic Funds Transfer, subject to a 0.7% MyFloridaMarketPlace transaction fee, and are contingent upon written confirmation of service acceptance by the Commission.

Hunting and Trapping

POSTED

DEADLINE

St. Pete Campus Awning Replacements

Solicitation # FWC 26/27-02

The Florida Fish and Wildlife Conservation Commission (FWC) is proceeding with the replacement of four wind-damaged awnings at the St. Pete Headquarters Campus. Although originally issued as Invitation to Bid FWC 26/27-02 with an estimated budget of 99,500 dollars, the Commission received fewer than two responsive bids. Consequently, the FWC has withdrawn the formal solicitation and is transitioning to an exceptional purchase process pursuant to section 287.057(6), Florida Statutes, to negotiate the best terms and conditions for the state. The scope of work requires the removal of damaged fabric covers and the fabrication and installation of new covers using all-weather exterior woven acrylic or polyester fiber reinforced vinyl. Technical specifications mandate heat-welded and double-stitched seams with UV-resistant sewing thread. Installation methods vary by location, utilizing either rope and grommet or staple stitch methods. The project must be completed by March 31, 2027, and includes a minimum 10-year warranty on fabric and a one-year warranty on labor, materials, and equipment. The procurement process emphasizes responsiveness and responsibility, requiring bidders to provide verifiable references and certifications regarding forced labor, the boycott of Israel, and scrutinized company status. All shipments are F.O.B. destination with prepaid transportation charges. Payment is contingent upon written confirmation of delivery and acceptance by the Commission, with an inspection period of five working days. Compliance with the Davis-Bacon Act and Build America, Buy America provisions is required where applicable.

Other Foundation, Structure, and Building Exterior Contractors

POSTED

DEADLINE

in about 2 hours

Marine Upholstery ServicesThis subcontract for Marine Upholstery Services supports prime contractors on projects for the Florida Fish and Wildlife Conservation Commission. The scope of work involves the supply and installation of marine-grade vinyl and fabrics for leaning post seats and any seating located fore of the console. All materials and workmanship must adhere to commercial durability standards specifically designed for offshore research vessels. The opportunity was posted on September 14, 2026, with a response deadline of October 6, 2026. Classified under NAICS code 314999, the contract focuses on the delivery of fully installed seating upholstery to meet the rigorous demands of the agency's maritime operations.

All Other Miscellaneous Textile Product Mills

POSTED

DEADLINE

Marine Fuel System FabricationThis subcontract for Marine Fuel System Fabrication involves the supply and installation of commercial-grade fuel systems for prime contractors working on Florida Fish and Wildlife Conservation Commission projects. The scope of work includes the installation of fuel tanks coated with coal tar epoxy, stainless Weema fuel level senders, and Racor fuel water separators featuring stainless bracket mounts. All fuel fill hardware must be 316 stainless and compliant with U.S. EPA regulations to ensure a fully installed and tested fuel system. The opportunity was posted on September 14, 2026, with a response deadline of October 6, 2026. Classified under NAICS code 332999, the contract is managed by the state of Florida for the Florida Fish and Wildlife Conservation Commission. Interested parties can find further details through the MyFloridaMarketplace vendor portal.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

DEADLINE

Marine Engine Installation and RiggingThis subcontract for Marine Engine Installation and Rigging supports prime contractors on projects for the Florida Fish and Wildlife Conservation Commission. The scope of work involves the installation and rigging of FWC-supplied 200 hp Yamaha engines, including the integration of engine controls, cables, and gauges. To ensure a fully operational propulsion system, the contractor must utilize UFLEX High Efficiency Mach Series cables, harnesses, and switch panels in accordance with factory pre-rigging standards. The opportunity is categorized under NAICS code 811310 and was posted on September 14, 2026, with a response deadline of October 6, 2026. Interested parties can find further details through the Florida Marketplace vendor portal.

Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS