Drydock Repairs of the Coast Guard Ant Puget Sound (ANB 55107)

The United States Coast Guard Surface Forces Logistics Center, Contracting Procurement Branch 3, intends to issue a Commercial Request for Quote (RFQ) for Drydock Repairs of the Coast Guard Ant Puget Sound (ANB 55107), a 55 Foot Aids to Navigation Boat. The Coast Guard intends to conduct the procurement in accordance with Federal Acquisition Regulation (FAR) Part 12 Acquisition of Commercial Items. The NAICS Code is 336611 and the small business size standard is less than 1,000 employees. This acquisition will be issued as a Best Value Request for Quote (RFQ), on or about 26NOV12. The RFQ will be issued via the Federal Business Opportunity (FEDBIZOPPS) web page at https:fbo.gov. This Requirement will be evaluated using past performance as an evaluation factor. Hard copies of the solicitation and specification will not be issued. It is incumbent upon contractors to monitor the FEDBIZOPPS web page for the RFQ release and all subsequent amendments. FEDBIZOPPS contains an option for automatic notification service. THE ACQUISITION WILL BE SOLICITED AS A TOAL SMALL BUSINESS SET-ASIDE. The government intends to award one contract as a result of the solicitation. This availability is geographically restricted to a facility located in the Strait of Juan de Fuca and Puget Sound, WA along a route where fuel and berthing services are available. The anticipated Period of performance is forty-five (45) calendar days, from 05FEB2013-22MAR2013. A CD-ROM containing all applicable drawings is available free of charge to contractors upon request not later than three (3) days from the solicitation issuance. CD-ROM (s) will be sent via FED-X. The CD-ROM (s) contain Windows compliant raster/vector formats (e.g.*DWF, etc.). The scope of the acquisition is for the overhauling, renewing and repairing of various items aboard the ANB 55107. This work may include, but is not limited to: WORK ITEM 1: General Welding, Provide WORK ITEM 2: Hull Plating ( U/W Body ) WORK ITEM 3: Hull Plating (U/W Body) Ultrasonic Testing, Perform WORK ITEM 4: Rub Rail and Fendering, Inspect WORK ITEM 5: Work Platform, Inspect WORK ITEM 6: Appendages (U/W), Leak Test WORK ITEM 7: Accessible Spaces, Inspect WORK ITEM 8: Accessible Voids, Inspect WORK ITEM 9: Diesel Fuel Tanks, Clean and Inspect WORK ITEM 10: Diesel Fuel, Refill WORK ITEM 11: Watertight Closures, Inspect WORK ITEM 12: Mast, Inspect WORK ITEM 13: Main Diesel Engine Mount Vibration Isolators, Renew WORK ITEM 14: Main Diesel Engine, Align WORK ITEM 15: Shaft(s), Inspect w/ Haul-out WORK ITEM 16: Water Lubricated Shaft Bearings, Renew WORK ITEM 17: Propeller (s), Inspect WORK ITEM 18: SW Heat Exchangers; Clean , Inspect and Hydro WORK ITEM 19: Exhaust, Clean and Inspect WORK ITEM 20: Fuel Valves, Renew WORK ITEM 21: Non-Standard Hoses, Inspect WORK ITEM 22: Standard Hoses, Renew WORK ITEM 23: Interior Hull Insulation, Inspect WORK ITEM 24: Sea Valves, Renew WORK ITEM 25: Sea Strainers, Inspect WORK ITEM 26: Grease Trap, Clean and Inspect WORK ITEM 27: Bilges, Remove Surface Contaminates WORK ITEM 28: Bilges, Inspect WORK ITEM 29: Air Compressor, Inspect and Service WORK ITEM 30: Hydraulic Oil Tanks, Clean and Inspect WORK ITEM 31: Steering System, Inspect WORK ITEM 32: Rudder(s), Remove, Inspect, and Reinstall WORK ITEM 33: Handrails, Lifelines, Stanchions and Sockets, Inspect WORK ITEM 34: Fore Deck, Preserve WORK ITEM 35: Buoy Deck, Preserve WORK ITEM 36: Tank Sewage Holding, Clean and Inspect WORK ITEM 37: Hull Identification Markings , Apply WORK ITEM 38: U/W Body, Preserve "100%" WORK ITEM 39: Grating/Girders , Inspect WORK ITEM 40: Hull Plating Freeboard, Preserve - " 100% " WORK ITEM 41: Tank Potable Water, Inspect WORK ITEM 42: Superstructure, Preserve "100%" WORK ITEM 43: Tank Grey Water Holding, Clean and Inspect WORK ITEM 44: Cathodic Protection / Zinc Anodes, Renew WORK ITEM 45: Routine Drydocking, Provide WORK ITEM 46: Temporary Services, Provide WORK ITEM 47: Full Power Trial Performance, Provide WORK ITEM 48: Time Compliance Technical Order (TCTO) , Complete WORK ITEM 49: Deck Fittings, Inspect WORK ITEM 50: Marine Chemist Service, Provide Contractors shall provide a current certification of its drydocking facility/travel lift/or crane as required by the specification, Routine Drydocking Work Item, and SFLC Standard Specification 8634_STD. All welding and brazing shall be accomplished by trained welders, who have been certified by the applicable regulatory code performance qualification procedures. For further information or questions regarding this solicitation, please contact Mr. Matthew Katsaris at +1 (555) 000-0000 or email: contact@example.gov or Ryan dela Cruz at +1 (555) 000-0000 or email: contact@example.gov.