Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →
CLEATUS
Get CLEATUS

This Subcontract opportunity from Department Of Defense was posted on September 22, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Field Hardware Packaging & Assembly

Closed
Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 334418
New
International
Automatic Particle Counter (APC) Equipment SupplyThis subcontract involves the supply of 150 Automatic Particle Counters (APC) intended for prime contractors working on projects for the Government of Canada, specifically the Department of National Defence and the Royal Canadian Air Force. The equipment must be manufactured to meet ISO 11171 standards and provide contamination code reporting in accordance with ISO 4406:2021. Each unit is required to be equipped with high-pressure hose sets and either M16x2 or SAE J1502 quick-connect couplings, and must be delivered with technical documentation and identification plates. The procurement is categorized under NAICS code 334418 and is to be performed within Canada. Interested parties should note the response deadline of November 16, 2026, for this equipment supply opportunity.
Department of National Defence

POSTED

1 day ago

DEADLINE

in 8 days
NAICS: 334418
New
DIBBS
Quick Release Pin SupplierThis subcontract involves the supply of 43 specialized quick-release pins, identified by NSN 5315-015-33818-8, to support prime contractors delivering for the Department of Defense under the DLA Weapons Support ASC Commodities Division. The supplier is responsible for manufacturing or sourcing these pins in strict accordance with the technical and quality standards outlined in the DLA Master List of Technical and Quality Requirements. All items must be packaged according to RP001 DLA Packaging Requirements and delivered to the designated DLA destination in San Diego, California. The procurement falls under NAICS code 334418, with a response deadline set for November 13, 2026.
DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

2 days ago

DEADLINE

in 5 days
NAICS: 334418
New
DIBBS
Electrical Power Cable Assembly SupplyThis subcontract involves the supply of two specialized electrical power cable assemblies, specifically NSN 6150015902141 and L3 Technologies part number 60085525+000. The contract supports prime contractors delivering for the Department of Defense under the DLA Weapons Support ASC Commodities Division. All deliverables must strictly adhere to MIL-STD-2073-1E for packaging and MIL-STD-129 for marking requirements. The project falls under NAICS code 334418 and specifies New Cumberland as the place of performance. Interested parties must note the response deadline of November 13, 2026, following the posting date of November 6, 2026.
DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

2 days ago

DEADLINE

in 5 days
NAICS: 334418
New
DIBBS
Specialized Cable Assembly Production (NSN 5995017172227)This subcontract involves the manufacture and supply of one specialized Cable Assembly, identified by NSN 5995017172227, for prime contractors supporting Department of Defense supply contracts. The production must strictly adhere to Basic Drawing NR 19207 12613498 Rev A, as well as Reference Drawings NR 19207 12420957 Rev D and NR 19207 12608579 Rev A, in accordance with TDP Rev A Gen 2 requirements. Managed by the DLA Weapons Support Aviation Supply Chain ESOC Buys, the contract falls under NAICS code 334418 and requires full compliance with DFARS covered defense telecommunications prohibitions. The place of performance is located in Little Falls, Minnesota. The solicitation was posted on November 6, 2026, with a response deadline of November 13, 2026.
DLA WEAPONS SUPPORT AVIATION SUPPLY CHAIN ESOC BUYS

POSTED

2 days ago

DEADLINE

in 5 days
NAICS: 334418
New
DIBBS
Manufacture and Supply of Blind Rivets (PN 11438039-15)This subcontract involves the manufacture and supply of 50 blind rivets, part number 11438039-15, for prime contractors supporting DLA Weapons Support ASC projects. The rivets must be fabricated according to reference drawing 18876 11438039 Revision AE using precision machining and forming equipment. Quality assurance requires the implementation of zero-based sampling in accordance with MIL-STD-1916 or ASQ H1331, with final products packaged per MIL-STD-2073-1E and marked per MIL-STD-129. The contractor must maintain several critical certifications and security standards, including the US/Canada Joint Certification Program, CMMC Level 2, and DFARS 252.204-7012 compliance. This Department of Defense requirement is categorized under NAICS code 334418, with the place of performance located in New Cumberland, Pennsylvania.
DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

2 days ago

DEADLINE

in 5 days
NAICS: 334418
New
DIBBS
Manufacture and Supply of Straight Tube-to-Boss AdaptersThis subcontract involves the manufacture and supply of 1,812 straight tube-to-boss adapter assemblies for the DLA Weapons Support Nuclear Reactor Program. The scope of work includes the fabrication of fitting bodies, nuts, and sleeves designated as Critical Application Items, utilizing precision machining to ensure compliance with NSN 4730004115597. All deliverables must be marked and packaged in accordance with MIL-STD-129 and MIL-STD-2073-1E standards. The project is categorized under NAICS code 334418 and will be performed in New Cumberland. Interested parties must respond by November 16, 2026, to support prime contractors delivering these essential components to the Department of Defense.
DLA WEAPONS SUPPORT NUCLEAR REACTOR PROGRAM

POSTED

2 days ago

DEADLINE

in 8 days
NAICS: 334418
New
DIBBS
Supply of Straight, Headless Pins (Critical Application)This subcontract involves the supply of 47 units of straight, headless pins for prime contractors supporting DLA supply contracts. The items must meet the technical requirements for part number 82402098 and comply with specifications from approved manufacturers, specifically Transaero, Inc. or Ontic Engineering. Due to the critical application of these components, they must be produced with high-precision tolerances and include full material certifications. The contract is managed by the Department of Defense under the DLA Weapons Support ASC Commodities Division, with the place of performance located in Cherry Point. The solicitation was posted on November 6, 2026, with a response deadline of November 13, 2026. The procurement falls under NAICS code 334418.
DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

2 days ago

DEADLINE

in 5 days
NAICS: 334418
New
DIBBS
Supply of Drain Cocks (NSN 4820012485052)This subcontract involves the manufacture or sourcing of 26 units of drain cock hardware meeting NSN 4820012485052 specifications for prime contractors supporting the DLA Weapons Support Fluid Handling Division of the Department of Defense. The contractor is responsible for ensuring all items are packaged and palletized according to MIL-STD-2073-1E and RP001 standards, with all shipments marked in compliance with MIL-STD-129. The performance of this contract will take place in Bremerton, Washington. Interested parties must respond by November 16, 2026, regarding this requirement categorized under NAICS code 334418.
DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

2 days ago

DEADLINE

in 8 days
NAICS: 334418
New
DIBBS
Annular Ball Bearing SupplyThis subcontract involves the supply of 20 annular ball bearings, identified by NSN 3110015316865, for prime contractors working on DLA Weapons Support procurement projects. The bearings must strictly adhere to Configuration Control Item standards to ensure technical compliance. All units are to be delivered to the Defense Logistics Agency in Jacksonville, Florida. The contract mandates rigorous logistics and handling protocols, requiring packaging according to MIL-STD-2073-1E and marking in accordance with MIL-STD-129. Additionally, all shipments must be palletized following RP001 DLA Packaging Requirements. This procurement is managed by the Department of Defense under the DLA Weapons Support ASC Commodities Division.
DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

2 days ago

DEADLINE

in 5 days
NAICS: 334418
New
DIBBS
Supply of MIL-DTL-38999 Electrical Plug ConnectorsThis subcontract involves the manufacture or distribution of six electrical plug connectors, specifically part number D38999/26FE6PN, for prime contractors working with the Department of Defense DLA Weapons Support Active Devices Division. The components must strictly adhere to MIL-DTL-38999N Revision N and MIL-DTL-38999/26G Revision G specifications. To qualify, the provider must hold QPL/QML certification for Federal Stock Class 5935. Additionally, all deliverables must comply with MIL-STD-129 and RP001 packaging standards. The opportunity is categorized under NAICS code 334418, with a response deadline set for November 20, 2026.
DLA WEAPONS SUPPORT ACTIVE DEVICES DIVISION

POSTED

2 days ago

DEADLINE

in 12 days
NAICS: 334418
New
DIBBS
Manufacturing and Supply of Nonmetallic Hose AssembliesThis subcontract, issued by the Department of Defense for the DLA Weapons Support Fluid Handling Division, requires the fabrication and supply of 172 nonmetallic hose assemblies. The contractor must manufacture these assemblies according to NSN 4720-01-495-7466 and the DLA Master List of Technical and Quality Requirements, with a strict prohibition on the use of additive manufacturing. All finished products must be marked per MIL-STD-129 and packaged according to ASTM D3951 for delivery to DLA Distribution centers. The opportunity is designated as a Total Small Business Set-Aside under NAICS code 334418, with the place of performance located in New Cumberland. Interested parties must respond by November 16, 2026, to provide these essential components to prime contractors supporting the agency.
DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

2 days ago

DEADLINE

in 8 days
NAICS: 334418
New
DIBBS
Printed Circuit Board (PCB) Fabrication and AssemblyThis subcontract opportunity is for the fabrication and assembly of populated printed circuit boards to support prime contractors on DLA Weapons Support ASC projects. The scope of work includes multi-layer PCB fabrication, SMT assembly, and through-hole soldering of signal processing components, all performed according to strict aerospace standards. The final deliverables consist of fully populated and tested PCB assemblies. The contract is issued by the Department of Defense under the DLA Weapons Support ASC Supplier OE and AF Division and is designated as a Total Small Business Set-Aside. Qualified bidders must maintain ISO 9001 certification and ITAR registration. The place of performance is located in New Cumberland, Pennsylvania, with a response deadline set for November 13, 2026.
DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

2 days ago

DEADLINE

in 5 days

AI Contract Overview

Show more

This subcontract for Field Hardware Packaging and Assembly supports Department of the Air Force AI Classroom projects by providing specialized hardware design and assembly. The scope involves creating hardened, self-contained hardware configurations, including ruggedized enclosures and chassis optimized for mobile field delivery. All systems must ensure standalone deployment capabilities and adhere strictly to MIL-STD ruggedization and transportation standards to deliver a completed, durable hardware unit. The project is managed under the Department of Defense with a performance location at Wright Patterson AFB. Classified under NAICS code 334418, the opportunity was posted on September 22, 2026, with a response deadline of September 24, 2026.

General Info

Subcontract for ruggedized AI classroom hardware assembly for Department of the Air Force.

Agency

Department Of Defense

NAICS

334418 - Printed Circuit Assembly (Electronic Assembly) Manufacturing

Place of Performance

Wright Patterson AFB, OH, 45433, USA

Set-Aside

NONE

Documents

This scope was carved out of IASS-AFRL-RMZB-2026-0055.

The full solicitation package (2 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

AI Classroom - Intent to Award Sole Source

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PhaseClosed
Posted

subcontract

Response Deadline

Deadline has passed

Submission Closed

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

Show more
AgencyDepartment Of Defense
ContactsNo contacts available
OfficeN/A
Organization / AgencyDepartment Of Defense
Office AddressN/A
ContactsNo contact information available

Full Description

Show more
Designs and assembles a hardened, self-contained hardware configuration for prime contractors on Department of the Air Force AI Classroom projects. Designs ruggedized enclosures and chassis, assembles systems optimized for mobile field delivery, and ensures standalone deployment capabilities per MIL-STD ruggedization and transportation standards. Delivers a completed, hardened, self-contained hardware unit.

More opportunities from Department Of Defense

Same awarding agency

NAICS: 541330
New
OTA
Next-Generation Human Systems Integration Framework and Toolset Prototype
Solicitation # bf1e6a1f-27f8-4540-afec-9134c5890c5e
The Department of Defense is seeking industry, academic, and commercial partners to develop a Next-Generation Human Systems Integration Framework and Toolset Prototype. This initiative aims to replace outdated, document-centric HSI practices with an agile, telemetry-driven approach integrated into digital engineering and DevSecOps workflows. The goal is to move away from retrospective compliance reviews toward continuous, quantitative, and predictive assessments of human-agent teaming to improve decision velocity and operator survivability across multi-domain weapons and autonomous systems. The project addresses critical gaps in current defense acquisition, specifically the lack of digital modeling for human cognitive dynamics and the risks associated with human-AI teaming, such as cognitive overload and automation complacency. The resulting modular prototype must embed real-time HSI evaluation into the digital engineering lifecycle, utilizing verification, validation, and analysis processes to achieve operational test certification. This framework will treat the human operator as a critical system component to reduce fielding timelines and minimize the need for excessive operator training.
Engineering Services

POSTED

1 day ago

DEADLINE

in 19 days
View Details
NAICS: 541618
New
OTA
Rapid Facility Clearance Cohort Pilot: Enabling Classified Technology Assessment and Bi-Directional Collaboration for Joint Operational Problems and Mission Capabilities Priorities
Solicitation # 8ee1fe86-14b2-42dd-974d-14259bd579e8
The Office of the Under Secretary of War for Research and Engineering, in coordination with the Defense Innovation Unit and Mission Engineering and Integration Activity, is establishing a Rapid Facility Clearance Mentorship and Prototyping Cohort. This pilot program addresses the procedural barrier where non-traditional, small-business, and commercial providers cannot access classified work without a Facility Clearance, yet cannot obtain one without a classified contract. Through subcontract relationships with Maximus Federal Services under the ONIX OTA framework, selected participants receive security mentorship and sponsorship for Facility Clearances adjudicated by the Defense Counterintelligence and Security Agency. The primary objective is to allow the government to assess emerging technologies and conduct collaborative dialogue in classified settings to reduce transition risk and accelerate Joint Force capabilities. Participation in the cohort provides a security pathway and potential access to classified technical exchanges but does not guarantee funded technical work, the acquisition of products, or preferential status. Vendors are not paid for participating in the cohort or the sponsorship process and are responsible for all administrative and compliance costs associated with maintaining industrial security programs.
Other Management Consulting Services

POSTED

3 days ago

DEADLINE

in 5 months
View Details
NAICS: 336612
New
Federal
PEO-SW: SOF Safety at Sea Assessment Event (AE)
Solicitation # PEO_SW_SOF_Safety_at_Sea_AE
SOFWERX, in collaboration with USSOCOM Program Executive Office SOF Warrior and Naval Special Warfare Command, is hosting an Assessment Event to identify prototype solutions for life raft capabilities and modernized emergency maritime survival supplies for single maritime craft operations. This opportunity is open exclusively to U.S. Persons from industry, academia, and national laboratories. The ultimate goal is to select a solution for program procurement by fiscal year 2029, with prototypes undergoing both operational and developmental testing. Interested parties must submit their capabilities by December 14, 2026. Following a downselect process, selected participants will attend an in-person event at SOFWERX from January 12 to January 14, 2027, to pitch and demonstrate their solutions to an evaluation panel. Successful candidates may enter into various agreements, including Other Transaction Authority, FAR-based contracts, or cooperative research and development agreements. Awardees may be required to comply with NIST SP 800-171 standards for protecting controlled unclassified information.
Boat Building

POSTED

3 days ago

DEADLINE

in about 1 month
View Details
NAICS: 561920
New
Federal
U.S. AFRICOM INDUSTRY DAY - Tunis, Tunisia (2-4 February, 2027)
Solicitation # W90QVA-27-AFRICOMJ2
U.S. Africa Command is seeking commercial vendors to participate in Industry Sessions held in Tunis, Tunisia, from February 2 to 4, 2027, during the West Africa Shared Security Forum. These sessions serve as a platform for vendors to showcase military technologies, supplies, and services to African Partner nations. Primary areas of interest include geospatial tools, drones and counter-UAS technology, C4ISR systems, cyber security, big data analytics, and administrative consulting. This notice is for market research purposes only and does not constitute a formal request for proposal or a commitment to contract. Interested vendors must submit a Capability Statement by November 12, 2026, detailing their company information, proposed exhibits, and demonstrated operational experience and supply chain capabilities within Africa. Selected participants are responsible for all associated costs, including travel, lodging, and equipment logistics, as the government provides no funding or administrative support. The government intends to notify selected vendors of their participation status by December 15, 2026, with a final acceptance deadline of December 17, 2026.
Convention and Trade Show Organizers

POSTED

4 days ago

DEADLINE

in 4 days
View Details
NAICS: 236220
New
OTA
DRAFT-Rapid Expandable Modular SCIF Construction Project (REMS) for U.S. Pacific Command
Solicitation # 1fb5fee8-d3b0-42c4-a304-54bed06392a5
The Department of Defense is seeking a contractor to execute the Rapid Expandable Modular SCIF Construction Project for U.S. Pacific Command at Camp H.M. Smith, Hawaii. The project involves the design, fabrication, transport, and installation of a temporary, one-story prefabricated modular administrative Sensitive Compartmented Information Facility on a permanent concrete foundation. This facility must provide secure workspace with concurrent NIPRNET, SIPRNET, and JWICS access for an initial capacity of 140 personnel, with the engineering capability to expand to 229 personnel by Fiscal Years 2028-2029 without requiring de-accreditation or major reconstruction. The primary goal is to overcome the limitations of conventional site-built construction, which is often too slow and disruptive to meet evolving Top Secret/Sensitive Compartmented Information mission requirements. The selected solution must adhere to ICD 705, IC Technical Specifications, and applicable UFC criteria while addressing regional challenges such as seismic activity, high wind loads, salt-air corrosion, and termites. By validating a secure off-site fabrication and chain-of-custody process, this project aims to establish a repeatable business model for accelerating the delivery of accredited secure facilities across the Indo-Pacific theater.
Commercial and Institutional Building Construction

POSTED

6 days ago

DEADLINE

in 22 days
View Details
NAICS: 541620
OTA
NEPA and Cultural Resources Compliance Workflow Modernization Prototype for Army Reserve 63d Readiness Division
Solicitation # fb420221-eb1c-4f01-9757-62730fa6db7f
The U.S. Army Reserve 63d Readiness Division is seeking prototype approaches to modernize and standardize statutory and regulatory due-diligence workflows across its seven-state area of responsibility. The primary focus is on improving the consistency, visibility, and timeliness of National Environmental Policy Act and National Historic Preservation Act compliance processes related to facility maintenance, military construction, and real-property actions. The goal is to address operational inefficiencies such as inconsistent handoffs, duplicate documentation, and limited visibility into pending actions by developing a repeatable, Government-reviewable operating model. This effort aims to integrate work-order tracking, geospatial information, and regulatory correspondence to create an auditable system for decision support. The prototype will be evaluated based on its ability to improve processing timeliness, record traceability, and documentation completeness without requiring the government to procure new software unless identified as a gap. While the contractor will develop the workflow model, the Government retains all final regulatory determinations, compliance approvals, and signature authority.
Environmental Consulting Services

POSTED

9 days ago

DEADLINE

in 12 days
View Details
NAICS: 541512
OTA
Commander, Navy Installations Command (CNIC) Smart Maintenance Orchestrator Challenge
Solicitation # c922d13c-feef-4034-a736-c38d30c96a2d
The Commander, Navy Installations Command (CNIC) is seeking a software solution to modernize maintenance management across 53 Navy Defense Fuel Support Points (DFSPs). The current system relies on inconsistent, manual, paper-based processes that lack automated notifications and enterprise-level visibility, creating difficulties in verifying compliance and tracking the status of critical fuel assets. The goal is to implement a holistic approach that captures the entire maintenance lifecycle, utilizing programmable logic to automatically trigger follow-on actions and notify responsible operators. The selected provider must design, build, and sustain a scalable system that produces verifiable records of all maintenance and inspections. While the government is open to commercial, custom, or hybrid technical approaches, the solution will be initially validated at one or more operational DFSPs, with a primary focus on high-impact deepwater terminals. This initiative aims to fundamentally transform how maintenance is driven and evidenced rather than simply digitizing existing paper workflows.
Computer Systems Design Services

POSTED

9 days ago

DEADLINE

in 11 days
View Details
NAICS: 541511
Federal
PEO-FW FANTOM Behavior Integration (A2E) Assessment Event (AE)
Solicitation # PEO_FW_A2E_AE
SOFWERX and USSOCOM Program Executive Office Fixed Wing are hosting an Assessment Event to identify vendors capable of integrating new or existing autonomy behaviors into the Framework of Autonomous Networked Tactical Open Modules software. This initiative supports the Adaptive Airborne Enterprise ecosystem, focusing on Group 2-3 uncrewed systems to enhance capabilities in swarm coordination, distributed decision-making, navigation, and task allocation using the FANTOM Core Software Development Kit. Participation is restricted to U.S. citizens, and the government seeks to establish a catalog of behaviors and evaluate vendor integration capabilities to inform future development. The process consists of four phases, beginning with a submission deadline of November 12, 2026, followed by a downselect period and a virtual Assessment Event from December 15 to 17, 2026. Successful participants may be eligible for various funding vehicles, including OTA, FAR-based contracts, or Cooperative Research and Development Agreements. Awardees may be required to comply with NIST SP 800-171 standards for protecting controlled unclassified information.
Custom Computer Programming Services

POSTED

10 days ago

DEADLINE

in 5 days
View Details
NAICS: 336414
OTA
U.S. Army Long Range Precision Munition Launched Effects Medium Range-Lethal Prototype Integration and Qualification
Solicitation # 11e09f87-099d-4282-abc4-f6a4ce589397
The U.S. Army is seeking prototype approaches for the Long Range Precision Munition (LRPM) to enhance the lethality and operational flexibility of aviation and ground forces. This effort focuses on integrating commercial or modified commercial air vehicles with government-developed payloads, launch systems, and battle-management technologies. The goal is to create a fieldable all-up-round capability capable of operating in contested anti-access/area-denial and PNT-denied environments. The selected performer will be responsible for the integration, testing, qualification, and sustainment of the prototypes, including software and firmware integration, cybersecurity validation, and airworthiness support. While the government will provide technical data packages for the payload section, software baselines, and interface protocols, the performer is responsible for all physical hardware procurement and assembly. This prototype-driven approach aims to generate the technical and manufacturing evidence necessary to support future production and operational fielding decisions.
Guided Missile and Space Vehicle Manufacturing

POSTED

11 days ago

DEADLINE

in 10 days
View Details
NAICS: 541330
Federal
AIR FORCE CRYPTOLOGIC OFFICE COMMERCIAL SOLUTIONS OPENING
Solicitation # FA7037-21-S-C001
The Air Force Cryptologic Office (AFCO) Cyberspace Intelligence Surveillance and Reconnaissance and Multi-Domain Innovation Division is soliciting innovative commercial capabilities through Commercial Solutions Opening FA7037-21-S-C001. The agency is seeking mature technologies and innovative services in Electromagnetic Warfare, Information Operations, and electromagnetic digital communications, with a specific goal of achieving a field demonstration within one year. The procurement process is divided into two phases: Phase I requires the submission of a quad chart and a white paper, while Phase II consists of full proposals by invitation only. Awards may be issued as traditional contracts or Other Transactions (OT), with potential funding ranging from 50,000 dollars to 50 million dollars over a period of performance lasting between one and five years. The evaluation process is based on technical merit, importance to agency programs, and fund availability, utilizing peer or scientific review to select offerors. Successful projects are expected to follow a structure of base period tasks to demonstrate feasibility, followed by option tasks for design, fabrication, testing, and evaluation. Because the work supports DoD ISR-Cyber capabilities, offerors must possess the necessary personnel and facility security clearances to handle classified work independently. All acquired technologies are treated as commercial items under 10 USC 3458 and DFARS 212.70. Submissions are managed by Carissa Heuertz, and the performance location is identified as San Antonio, Texas.
Engineering Services

POSTED

11 days ago

DEADLINE

in 11 months
View Details
NAICS: 541620
OTA
USSF SLD 30: Integrated Development Planning and Environmental Readiness Process Prototype
Solicitation # 61fb4c07-b7d0-4646-987e-dbc1c624d7cf
Space Launch Delta 30 is seeking industry, academic, and non-profit partners to prototype an integrated development planning and environmental readiness process. The goal is to replace the Department of the Air Force's fragmented legacy planning system, which currently takes over nine months to produce low-fidelity concepts, with a unified methodology. This effort focuses on the creation of a repeatable business process rather than physical construction or facility delivery. The objective is to utilize agile design charrettes and concurrent environmental analysis to compress the planning lifecycle, aiming to produce a high-fidelity 30% to 35% conceptual planning package and complete environmental documentation in under five months. This multi-phase prototype begins with Phase I, focusing on Small-Scale Project Process Prototype support for SLC-9. The final deliverable is a government-owned Technical Data Package that codifies this accelerated planning process.
Environmental Consulting Services

POSTED

16 days ago

DEADLINE

in 5 days
View Details
NAICS: 541512
OTA
Tactical ISR Processing, Exploitation and Dissemination (PED): Adaptive AI and Autonomy at the Tactical Edge
Solicitation # 1f829fd0-4f36-4a90-a3b7-d05d41483223
The National Geospatial-Intelligence Agency is seeking prototype solutions under an Other Transaction Authority vehicle to develop edge-deployable computer vision capabilities for unclassified small unmanned aerial systems. The primary goal is to enable sustained tactical intelligence, surveillance, and reconnaissance operations in contested and austere environments where connectivity is limited. By focusing on object detection, tracking, and re-identification, the project aims to eliminate the current dependency on enterprise cloud infrastructure for model retraining, allowing warfighters to maintain continuous custody of objects of interest. The required solution must utilize low-shot learning approaches, enabling operators with minimal coding expertise to adapt models at the point of need using limited labeled data on size, weight, and power constrained hardware. Success will be measured by specific precision, recall, and F1 thresholds, as well as the ability to re-identify objects after a loss of custody. To ensure operational utility, the prototype must integrate with standard GEOINT data formats, REST API architectures, and tactical dissemination systems such as the TAK ecosystem.
Computer Systems Design Services

POSTED

17 days ago

DEADLINE

in 11 days
View Details

Earlier notices in this NAICS code

Posted before this notice, open and closed

NAICS: 334418
Federal
Manufacture of Circuit Card Assembly (NIIN: 011999431)
SPRMM1 DLA Mechanicsburg

POSTED

about 2 months ago

DEADLINE

in 2 months
View Details
NAICS: 334418
Awarded
Federal
59--SOLENOID,ELECTRICAL
Solicitation # SPE7M526T376X
DLA Land And Maritime

POSTED

about 2 months ago

DEADLINE

N/A
View Details
NAICS: 334418
Closed
Federal
Distribution Box
Solicitation # SPRDL1-26-R-A040
DLA Land Warren

POSTED

about 2 months ago

CLOSED

about 1 month ago
View Details
NAICS: 334418
Closed
DIBBS
Supply of Electromagnetic Relays (NSN 5945-01-461-9953)
MARITIME SUPPLY CHAIN

POSTED

about 2 months ago

CLOSED

about 1 month ago
View Details
NAICS: 334418
Closed
DIBBS
Supply of Circuit Card Assemblies (P/N 798962-004)
MARITIME SUPPLY CHAIN

POSTED

about 2 months ago

CLOSED

about 1 month ago
View Details
NAICS: 334418
Closed
DIBBS
Supply of Fluid Pumps (NSN 4320015734057)
MARITIME SUPPLY CHAIN

POSTED

about 2 months ago

CLOSED

about 1 month ago
View Details
NAICS: 334418
Closed
DIBBS
Supply of Aircraft Electrical Connectors (NSN 1680015353461)
ASC COMMODITIES DIVISION

POSTED

about 2 months ago

CLOSED

about 1 month ago
View Details
NAICS: 334418
Closed
DIBBS
Hydraulic Manifold Assembly Supplier
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 2 months ago

CLOSED

about 1 month ago
View Details
NAICS: 334418
Closed
DIBBS
Supply of Quick Disconnect Coupling Halves (NSN 4730-01-176-7083)
FLUID HANDLING DIVISION

POSTED

about 2 months ago

CLOSED

about 1 month ago
View Details
NAICS: 334418
Closed
DIBBS
Supply of Adjusting Screw Assemblies (NSN 2835009611465)
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 2 months ago

CLOSED

about 1 month ago
View Details
NAICS: 334418
Closed
DIBBS
Supply of Voltmeter (NSN 6625013761613)
MARITIME SUPPLY CHAIN

POSTED

about 2 months ago

CLOSED

about 1 month ago
View Details
NAICS: 334418
Closed
DIBBS
Special Purpose Cable Assembly Fabrication
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 2 months ago

CLOSED

about 1 month ago
View Details

Find Active Opportunities Like This

Get AI-powered intelligence on the opportunities still open

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS