Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, September 16 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

High-Speed Fire Detection & Suppression Installation

Active

Federal

Response Deadline09/16/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract involves the installation of specialized fire mitigation and automated venting systems for prime contractors at the Army Pine Bluff Arsenal facility. The scope of work includes the implementation of high-speed fire detection sensors, suppression systems, and automated fail-safe shutdown protocols, alongside automated venting designed to prevent deflagration. The selected provider will be responsible for delivering a fully operational fire detection and suppression system, supported by safety venting schematics and a regulatory compliance matrix. This project falls under NAICS code 238220 and is managed by the Department of Defense under agency W6QK Acc-Ri, with a response deadline of September 16, 2026.

General Info

Install fire mitigation and automated venting systems at Army Pine Bluff Arsenal.

Agency

Department Of Defense → W6QK Acc-RiView Agency

NAICS

238220 - Plumbing, Heating, and Air-Conditioning ContractorsView NAICS

Place of Performance

Pine Bluff, AR, USA

Set-Aside

NONE

Documents

This scope was carved out of W519TC26ACSO.

The full solicitation package (5 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

Automated Fluidized Bed Mixer Facility Modernization for end use at Pine Bluff Arsenal – CSO

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedAug 26

subcontract

Response DeadlineSep 16

Submission deadline

Response Deadline

09/16/2026, 05:00:00 PM UTCin 4 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → W6QK Acc-Ri

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → W6QK Acc-Ri

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Installs specialized fire mitigation and automated venting systems for prime contractors on Army Pine Bluff Arsenal facility projects. Installs high-speed fire detection sensors, suppression systems, and automated fail-safe shutdown protocols. Implements automated venting to prevent deflagration. Provides safety venting schematics and a regulatory compliance matrix. Delivers an operational fire detection and suppression system.

Similar Contracts

Same NAICS industry code

ICE 8A - Ft Benning Improvements

Solicitation # 70CMSW25R00000011

Solicitation 70CMSW25R00000011 is a firm-fixed-price task order issued under an 8(a) Multiple Award Construction Contract (MACC) for design-build services to support the Immigration and Customs Enforcement (ICE) Office of Firearms and Tactical Programs at Fort Benning, Georgia. The project, valued between 4.0 million and 4.5 million dollars, focuses on life, safety, and operational improvements. The scope of work includes the installation of two aluminum awnings at the shipping and receiving dock and Fiske Range Lane 2, turf replacement at Fiske Range, the demolition of Building 2294, gutter and drainage improvements for Building 234, commercial HVAC services and replacements, and general facility improvements for Building 301 and the DAGr Team facility. The period of performance is 365 days from the date of award. Award will be based solely on the lowest total evaluated price, provided the offeror demonstrates a sound technical approach, appropriate design resources, and a comprehensive quality control and safety program. The contract is subject to the Davis-Bacon Act, requiring prevailing wage rates and specific paid sick leave for workers. Performance and payment bonds are required per FAR 52.228-15. Proposals must be submitted in two volumes: a technical and safety volume and a pricing volume using the provided template. All payment requests must be processed electronically via the Invoice Processing Platform and accompanied by certified payroll.

Bristol Alliance of Companies

POSTED

about 4 hours ago

DEADLINE

PIDC Project 3 - Dorm RTU Replacement and SCADA

Solicitation # 872287

This firm-fixed-price task order, issued under an 8(a) MACC IDIQ, involves the replacement and upgrade of Rooftop HVAC Units (RTUs) for the Alpha, Bravo, Charlie, and Delta dorms, as well as a SCADA system upgrade at the Port Isabel Detention Center in Los Fresnos, Texas. The project objective is to replace corroded and obsolete equipment with high-quality, coastal weather-resistant, and durable systems that exceed commercial standards. The scope includes removing existing RTUs, replacing necessary piping, electrical, and ducting, and installing new SCADA software and two chemical feed pumps in compliance with Texas Commission of Environmental Quality standards. The estimated magnitude of the project is between 1.2 million and 1.5 million dollars, with a period of performance of 365 days from the date of award. Award will be based solely on the lowest total evaluated price, provided the offeror demonstrates a sound technical approach, appropriate design resources, and a comprehensive quality control and safety program. Key requirements include the submission of a Quality Control Plan, a safety plan, and the designation of a Project Manager with at least five years of relevant federal contracting experience. The contractor must also provide a one-year warranty for installation and craftsmanship and ensure all personnel pass required background checks for site access. Compliance with the Davis-Bacon Act and associated executive orders regarding wages and sick leave is mandatory. All payment requests must be submitted electronically via the Invoice Processing Platform and accompanied by certified payroll.

Bristol Alliance of Companies

POSTED

about 4 hours ago

DEADLINE

Packaged HVAC Unit Replacement - Bldg 1091

Adams & Associates, Inc.

POSTED

about 4 hours ago

DEADLINE

RFQ7593 Smoke Detector Installation

Solicitation # RFQ7593

Management & Training Corporation (MTC) is soliciting bids for a fee-for-service subcontracting opportunity to provide smoke detector installation and fire system services at the Sierra Nevada Job Corps Center in Reno, Nevada. The scope of work requires the replacement of 43 smoke detectors across specific dormitory rooms, including 12 detectors in rooms 11, 15, and 18, 12 detectors in room 19, and 19 detectors in rooms 20 and 21. The contractor must ensure all installed detectors communicate with the fire panel and that all work adheres to NFPA standards and local Authority Having Jurisdiction requirements. Bids must be submitted via email to Tom Williams by 3:00 PM PST on September 18, 2026. To be considered, applicants must provide a completed bid sheet, proof of insurance, and a supplier packet containing a W-9, self-certification form, and acceptance of terms and conditions. This opportunity is open to various small business set-asides, including SDB, WOSB, HUBZone, and Veteran-Owned businesses, under NAICS code 238220. Award decisions will be based on the best value as determined by MTC. The contract mandates compliance with Service Contract Labor Standards and Wage Determination No. 2015-5595 Revision 28 for labor rates in Washoe and Storey counties. Additionally, subcontractors must provide a 12-digit Unique Entity ID and certify their debarment status under FAR 52.209-6 if the subcontract exceeds 30,000 dollars. Strict adherence to government and Department of Labor guidance regarding the protection of sensitive and proprietary information is required.

Sierra Nevada Job Corps Center

POSTED

about 4 hours ago

DEADLINE

2026-Clearfield-Bldg E8 Welding HVAC

Solicitation # 2026- Clearfield- Welding Bldg. E8 HVAC Replacement

Management & Training Corporation is seeking fixed-price lump sum bids for a subcontracting opportunity to replace the HVAC system at Building E8 Welding within the Clearfield Job Corps Center in Clearfield, Utah. The scope of work includes the complete change-out of the existing motor, installation of wiring, conduit, disconnects, breakers, fuses, and starters, and the subsequent validation of voltage, phase, and grounding. Deliverables include startup and testing documentation, onsite training for maintenance personnel, and the provision of manufacturer O&M manuals. All work must adhere to OSHA requirements, federal, state, and local codes, and site safety procedures. Bids must be submitted via email to nelson.dar@jobcorps.org and patricia.willover@mtctrains.com by September 19, 2026, at 3:00 PM MST. To be considered for award based on overall best value, offerors must complete a physical site visit, provide a detailed bid breakout on company letterhead, and submit a bid bond guarantee. The project is a small business set-aside under NAICS 238220 and requires compliance with Davis-Bacon prevailing wage determinations for Davis County. Awardees must provide a UEI number, submit a Schedule of Values for invoicing via AIA G702/G703 forms, and provide original payment and performance bonds from a surety with at least an A- rating within five business days of an Intent to Award letter. Performance dates will be established upon the signing of a Notice to Proceed.

Management & Training Corporation

POSTED

about 4 hours ago

DEADLINE

CBP7664 Wellness HVAC Compressor Replacement

Solicitation # CBP7664

Management & Training Corporation is seeking bids for a subcontracting opportunity to replace a failed HVAC/refrigeration compressor at the Wellness facility of the Sierra Nevada Job Corps Center in Reno, Nevada. This fixed-price, single lump sum contract requires the contractor to provide all labor, materials, and equipment to execute a five-phase process including preparation, demolition, installation of an OEM-specified compressor, system testing and commissioning, and final closeout. The project must restore full cooling capacity and operational efficiency while adhering to EPA Section 608 regulations for refrigerant recovery. The work must be completed within thirty consecutive business days following the receipt of a written Notice to Proceed. Bids will be evaluated based on overall best value, considering price, quality, and delivery schedule. The estimated price range is between 0 and 25,000 dollars, though bids equal to or greater than 25,000 dollars require a 20 percent bid bond guarantee and subsequent performance and payment bonds from an A-rated surety company. Submission requirements include a bid sheet, proof of insurance, three comparable project references, and a completed supplier packet containing a W-9 and self-certification of business size under FAR 52.219-8. Contractors must comply with Davis-Bacon Act prevailing wage rates for Washoe County and adhere to FAR 52.204-10 reporting if the award reaches 40,000 dollars. Final payment is contingent upon a successful final inspection and the submission of a notice of final completion, certified payroll reports, and operation and maintenance manuals.

Sierra Nevada Job Corps Center

POSTED

about 4 hours ago

DEADLINE

Replace Shower Diverters in two (2) Dorms

Solicitation # replace-shower-diverters-two-2-dorms

This project involves the removal and replacement of shower diverters in eight bathrooms across two dorm buildings in Indiana. The scope of work includes replacing existing Powers brand systems with Delta or comparable models featuring readily available parts, as well as repairing or replacing any piping in poor condition leading into the diverters. The solicitation is open to various small business set-asides, including SDB, WOSB, HUBZone, and SDVOSB. Proposals must be submitted via email to Tammy Swallows at Atterbury Job Corps by September 14, 2026, at 3:00 PM. A site visit was scheduled for September 1, 2026.

Adams & Associates

POSTED

about 4 hours ago

DEADLINE

This is a subcontracting opportunity to replace a chiller in McKinney, TX.

Solicitation # subcontracting-opportunity-replace-chiller-mckinney-tx

Serrato Corporation is seeking bids for a subcontracting opportunity to replace a failing air-cooled chiller at the North Texas Job Corps Center, specifically within Building 214/215 in McKinney, Texas. The scope of work includes the demolition and disposal of the existing chiller, the installation and startup of a new air-cooled chiller, and the integration of building automation controls using a JACE 9000 central integration point. Additionally, the contractor is responsible for installing three-way control valves at four air handling units, replacing VFDs, performing AHU cleaning and inspection, and ensuring all wiring is plenum-rated. Bids must be submitted by September 18, 2026, and quotes must remain valid for 90 days. Required submission documentation includes manufacturer equipment specifications, a Certificate of Liability Insurance naming Serrato Corporation as the holder, and Form 1413 for Davis-Bacon Act certified payroll compliance for work exceeding 2,000 dollars. Insurance requirements include a minimum of 500,000 dollars for Employers Liability and 1,000,000 dollars per occurrence for Commercial General Liability. The project is set aside for various small business categories, including SDB, WOSB, HUBZone, VOSB, and SDVOSB. Primary points of contact for this solicitation are Stacy Smith and Roy Henderson.

Serrato Corporation DBA North Texas Job Corps

POSTED

about 4 hours ago

DEADLINE

AAL-0880-02 HVAC and Electrical Upgrades Fairbanks

Solicitation # AAL-0880-02

Solicitation AAL-0880-02 is a presolicitation for HVAC and electrical upgrades at the Fairbanks FSS facility in Alaska, with an estimated construction magnitude between 250,000 and 500,000 dollars. The scope of work includes the replacement of the Fairbanks FSS chiller, four AC units, chilled-water piping, and all associated electrical systems. To maintain operations during construction, the contractor must provide temporary and redundant cooling and perform modifications to Panel P1 and various HVAC circuits. The project is scheduled for a proposed start date of April 15, 2027. Final deliverables include the completion of startup, testing, commissioning, and punch-list work, as well as providing FAA training and project closeout. This opportunity is set aside for small businesses, including SDB, WOSB, HUBZone, VOSB, SDVOSB, and Alaskan small businesses, under NAICS code 238220. Interested firms should contact Masanori Akers, the Parsons Subcontract Administrator, for further information.

PTSI Managed Services Inc.

POSTED

about 4 hours ago

DEADLINE

Main Building 1 Wing 5 – Six Rooftop HVAC Unit Replacement – Glenmont Job Corps Center

Solicitation # S26-010

The Glenmont Job Corps Center is soliciting proposals from qualified, New York State licensed contractors for the replacement and installation of HVAC equipment within Main Building No. 1, Wing 5 (Education Building) in Glenmont, New York. The project involves replacing two 7.5-ton split-system units for the auditorium, one 6-ton rooftop unit for the library and computer lab, and one 12.5-ton rooftop unit for the north and east wing classrooms. Additionally, the scope includes installing four 2-ton ductless mini-split heat pump systems, removing a window air-conditioning unit, and abandoning two 5-ton rooftop units in place. Comprehensive associated work encompasses demolition, roof curbs and penetrations, ductwork, refrigerant and condensate piping, electrical work, controls, structural roof evaluations, and fire alarm and duct smoke detector installations, concluding with testing, balancing, and commissioning. This solicitation is set aside for various small business categories, including SDB, WOSB, HUBZone, and Veteran-Owned Small Businesses. The project must be completed within 210 calendar days following the written Notice to Proceed, and the facility will remain operational throughout the construction period. Key deadlines include a pre-proposal site walkthrough on September 10, 2026, with vendor questions due by September 14, 2026. Final proposals must be submitted by September 21, 2026, at 4:00 PM ET. All work must comply with applicable New York State codes, safety regulations, and environmental requirements.

Adams and Associates, Inc.

POSTED

about 4 hours ago

DEADLINE

Replace HVAC Systems in the following buildings on our campus –1.) 1091 – Glazing/Welding/Heavy Mechanics Bldg

Solicitation # 26-140

This project involves the replacement of a pad-mounted gas-fired packaged HVAC unit at the Glazing, Welding, and Heavy Mechanics Building (1091) in Indiana. The existing 10-ton Carrier unit, which utilizes R-22 refrigerant, will be replaced with a new 12.5 SEER packaged unit using non-R22 refrigerants such as R-410A or R-454B. The scope of work requires the reuse of existing ductwork, electrical disconnects, and thermostat wiring. Following installation, the old unit and any recovered refrigerant must be labeled and left at the maintenance building for parts and reuse. The solicitation is managed by Adams and Associates, Inc., with a response deadline of October 5, 2026. This opportunity is set aside for various small business categories, including Small Disadvantaged, Women-Owned, HUBZone, and Veteran-Owned businesses. Interested parties should contact Tammy Swallows for further information regarding this NAICS 238220 project.

Adams & Associates, Inc.

POSTED

about 4 hours ago

DEADLINE

Replace HVAC Systems in the following buildings on our campus –1.) ABL Dormitory

Solicitation # 26-141

This subcontracting opportunity, managed by Adams & Associates, Inc. for the U.S. Department of Labor, involves the replacement of HVAC systems at the Atterbury Job Corps Center ABL Dormitory in Indiana. The project requires replacing existing R-22 Bryant condensing units and coils serving common areas and dormitory wings A, B, C, and D with new 12.5 SEER packaged units utilizing non-R22 refrigerants such as R-410A or R-454B. The contractor is expected to reuse existing electrical disconnects, ductwork, and thermostat wiring, and must label and leave all recovered refrigerant on-site. Bidders must attend a mandatory site visit on September 23, 2026, and submit a single lump sum proposal by October 5, 2026. Award will be based on best value, evaluating price (60 points), quality (20 points), past performance (10 points), and schedule (10 points). Eligible vendors must maintain an active SAM.gov registration and a Unique Entity ID, hold a valid Indiana Contractor's License, and provide proof of specific automobile and workers' compensation insurance. Compliance with EPA, OSHA, and Davis-Bacon Act wage determinations is mandatory. Final payment is subject to Net 30 terms and is contingent upon the submission of a completed SF 1413, certified payroll records, and the release of liens from all subcontractors and material suppliers.

Adams & Associates, Inc.

POSTED

about 4 hours ago

DEADLINE

More opportunities from Department Of Defense → W6QK Acc-Ri

Same awarding agency

Cincinnati Lathe MO Retrofit

Solicitation # W519TC-26-Q-A181

The Army Contracting Command-Rock Island is soliciting a total small business set-aside for an electrical retrofit of a Cincinnati Lathe MO 5305U18-88-013 located at the Rock Island Arsenal Joint Manufacturing and Technology Center in Illinois. The project requires a qualified contractor to engineer, procure, manufacture, install, and debug a comprehensive electrical retrofit package, featuring a FANUC Oi-TF Plus Control series with a 15 inch LCD display, updated servo and spindle motors, and new wiring and enclosures meeting NEMA standards. The contractor must also provide operator training and ensure the equipment can execute qualification cuts exceeding six feet with a dimensional tolerance of plus or minus 0.0005 inches. All work must adhere to OSHA safety standards for arc flash and lockout/tagout procedures. The government intends to award a single firm-fixed-price purchase order to the lowest-priced, responsive, and responsible vendor following a technical review for acceptability. The period of performance is not to exceed 34 weeks after contract award, with a target delivery date of November 1, 2026. Quotes are due by 6:00 PM on September 11, 2026, and must include shipping to Rock Island Arsenal and a Certificate of Conformance for all items. Payment will be processed electronically via the Wide Area Workflow system.

Machine Tool Manufacturing

POSTED

about 20 hours ago

DEADLINE

Precision Gear and Spline Cutting

Solicitation # W519TC26QA190

Solicitation W519TC26QA190 is a request for quotes for precision gear and spline cutting services to support the United States Army Rock Island Arsenal - Joint Manufacturing Technology Center. The scope of work involves final gear cutting operations for bevel gearshafts and other components in accordance with technical drawings 10923030, 10925678, 10925679, 10925680, and 10953662. This requirement is designated as a women-owned small business set-aside, and the government intends to award one firm fixed price purchase order to the lowest price, responsive, and responsible contractor. The submission deadline for quotes is September 15, 2026, at 10:00 AM. Because the technical drawings are subject to distribution restrictions, contractors must have an approved Joint Certification Program account and request access via SAM.gov using their CAGE code. All deliveries must include a Certificate of Conformance to avoid rejection, and inspection and acceptance will occur at the destination in Rock Island, Illinois. The contract incorporates various federal regulations, including Buy American preferences and DFARS requirements for safeguarding covered defense information.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 20 hours ago

DEADLINE

Non-micronized Pentaerythritol

Solicitation # W519TC27RNMPE

The Army Contracting Command - Rock Island is conducting market research through a sources sought announcement for the procurement of Non-micronized Pentaerythritol. The future requirement will be issued as a single firm-fixed price contract for a non-commercial supply, awarded to the responsive, responsible, lowest priced offeror under Federal Acquisition Regulation Part 12 Simplified Acquisition Procedures. The scope includes a primary requirement for 41,800 lbs of the material and a First Article Test of 2 lbs, with an additional 100 percent option quantity of 41,800 lbs to be evaluated at the time of award. All materials must be produced in accordance with drawing 36-1-317, Rev F. Interested parties are requested to provide their UEI/Cage code, small business designation, business size status, past performance on similar requirements, and estimated costs. Submissions should be directed to Contract Specialist Austin Acree. This current announcement is for research purposes only and will not result in a contract award.

All Other Miscellaneous Chemical Product and Preparation Manufacturing

POSTED

about 20 hours ago

DEADLINE

Install Utilities - RV Campground Site - Rock Island Arsenal (Amendment 0003)

Solicitation # W519TC-26-R-A072

The Army Contracting Command - Rock Island is soliciting proposals for a commercial firm-fixed-price construction contract to install utilities for a new RV campground site at the Rock Island Arsenal in Illinois. This 100% small business set-aside project involves the installation of an 8-inch HDPE water main with a fire hydrant, a 1-inch gas main with a meter, and a 13.8 KV overhead electrical service leading to a 750 KVA transformer. The work must adhere to the 2026 Iowa State Urban Design and Specifications Program (SUDAS) and USACE EM 385-1-1 (2024) safety standards. The contractor is required to complete the project within 180 working days from the Notice to Proceed, with liquidated damages set at 1,000 dollars per calendar day of delay. Proposals are due by September 15, 2026, and must include a total firm-fixed-price bid, a high-level project schedule, resumes for a Quality Control Manager and Site Safety and Health Officer, and evidence of past performance on similar utility projects. The government will award the contract based on the best overall value, conducting a comparative analysis of price, schedule, personnel, and past performance. Required responsibility documents include a bid bond of 20 percent of the bid price or 3 million dollars, whichever is less, and proof of current contractor licensing. Payment will be processed electronically through the Wide Area WorkFlow system.

Water and Sewer Line and Related Structures Construction

POSTED

about 20 hours ago

DEADLINE

OEM Radar Site Commissioning

Electronic and Precision Equipment Repair and Maintenance

POSTED

DEADLINE

NetworkedIO (NIO) Software Licensing

Software Publishers

POSTED

DEADLINE

Shielded Network Cabling Supply

Commercial, Industrial, and Institutional Electric Lighting Fixture Manufacturing

POSTED

DEADLINE

SpotterGlobal C40-EXT Compact Surveillance Radar Supply

Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

POSTED

DEADLINE

Fleet Fuel Supply

Piece Goods, Notions, and Other Dry Goods Merchant Wholesalers

POSTED

DEADLINE

Fleet Maintenance Services

General Automotive Repair

POSTED

DEADLINE

Material Handling Equipment (MHE) Services

Freight Transportation Arrangement

POSTED

DEADLINE

Secure Postal and Mail Distribution Services

General Freight Trucking, Long-Distance, Truckload

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 650+ contractors already using CLEATUS