Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

HVAC and Mechanical Systems Renovation

Active

State & Local

Response Deadline08/05/2026, 04:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract titled HVAC and Mechanical Systems Renovation pertains to the upgrade or replacement of heating, ventilation, and air conditioning systems, encompassing ductwork, vents, thermostats, and control components to enhance energy efficiency and occupant comfort. The work is being procured as a subcontract under NAICS code 238220, which corresponds to HVAC installation and repair services, and is being administered by the state of Utah. The opportunity was posted on July 23, 2026, with a response deadline of August 5, 2026, at 4:00 PM, requiring interested parties to submit proposals within this timeframe. The place of performance and specific location details are not specified, indicating that the scope may cover multiple sites or be determined later. There is no set-aside designation provided, suggesting the subcontract is open to all eligible contractors. All submissions must be made through the Utah BonfireHub portal linked in the contract information.

General Info

HVAC systems upgrade via Utah subcontract, proposals due August 5, 2026, through BonfireHub.

Agency

UtahView Agency

NAICS

238220 - Plumbing, Heating, and Air-Conditioning ContractorsView NAICS

Place of Performance

UT, USA

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 23

subcontract

Response DeadlineAug 5

Submission deadline

Response Deadline

08/05/2026, 04:00:00 PM UTCin 12 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyUtah

ContactsNo contacts available

OfficeN/A

Organization / Agency

Utah

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Upgrade or replacement of HVAC systems including ductwork, vents, thermostats, and controls for efficiency and comfort.

Similar Contracts

Same NAICS industry code

Fire Hydrant Repair and Preventive MaintenanceThe contract titled Fire Hydrant Repair and Preventive Maintenance requires the execution of comprehensive repairs on malfunctioning fire hydrants, including replacement of valves, restoration of stems, and implementation of preventive maintenance procedures to enhance operational reliability and extend the service life of the equipment. The work is aimed at reducing the frequency of emergency failures and ensuring consistent performance during critical situations. All services must be performed in accordance with industry standards to maintain public safety and municipal infrastructure integrity. This is a subcontract opportunity posted on July 23, 2026, with a response deadline of August 20, 2026. It is classified under NAICS code 238220, indicating specialization in plumbing, heating, and air-conditioning contractors. The contracting entity is OC Community Resources operating under the State of California, though specific location details for performance or contact information are not provided. Subcontractors interested in bid must ensure full compliance with all technical and procedural requirements outlined by the agency, as failure to meet maintenance and repair standards could compromise public safety and result in contract termination.

OC Community Resources

POSTED

about 19 hours ago

DEADLINE

Rooftop HVAC Unit Installation (Mechanical)The contract titled Rooftop HVAC Unit Installation Mechanical involves the full installation of rooftop heating, ventilation, and air conditioning units along with all associated ductwork, labor, and supervision. The work is strictly limited to mechanical systems and explicitly excludes any electrical connections, which must be handled separately by another party. This subcontract is issued by the City of Dallas under NAICS code 238220, which categorizes it under HVAC installation services, and is open for bids with a response deadline of August 28, 2026. The project is expected to be performed in Dallas, Texas, and bidders must possess the necessary expertise in mechanical systems and rooftop equipment integration. The opportunity is not subject to any specific set-aside provisions and is being solicited through the City of Dallas’s procurement portal with no additional agency or organizational details provided beyond Texas as the state of performance.

POSTED

about 21 hours ago

DEADLINE

in about 1 month

Piping and Pressure System InstallationThe contract involves the installation of refrigerant and condensate piping systems requiring welding, pressure testing, and seismic restraints compliant with ASME B31 and AWS D1.1 standards. All work must meet rigorous industry specifications for safety, durability, and structural integrity, with particular emphasis on proper welding techniques and system verification through pressure testing. Seismic restraints must be designed and installed to ensure system stability under seismic events in accordance with applicable codes. The project is structured as a subcontract under NAICS code 238220, which classifies it within the plumbing, heating, and air-conditioning contracting sector. The opportunity was posted on July 23, 2026, with a response deadline of August 25, 2026, and is being managed by the state of Utah through the BonfireHub platform. Place of performance and specific location details are not provided, but performance is expected within Utah. There is no set-aside designation specified for small businesses or other categories, and the contract does not include a designated point of contact for inquiries.

POSTED

about 21 hours ago

DEADLINE

in about 1 month

HVAC Unit Replacement – Data Room Split SystemsThe contract encompasses the removal and replacement of split system HVAC units in data rooms at Davis Technical College, with full scope including rigging, installation, and commissioning of the new units to ensure seamless operational continuity. Work must comply with industry standards for data center environmental controls, maintaining precise temperature and humidity levels critical to IT infrastructure integrity. The project is classified under NAICS code 238220 for heating, air conditioning, and refrigeration contractors, and is structured as a subcontract opportunity open to qualified vendors. All activities are expected to be completed with minimal disruption to campus operations, requiring careful scheduling and coordination with college personnel. Responses are due by August 25, 2026, with the solicitation posted on July 23, 2026, through the Utah BonfireHub portal. The contracting agency is the State of Utah, with performance occurring at Davis Technical College, though exact location details are not specified. There is no set-aside designation or special procurement preference indicated. Bidders must possess proven experience in commercial HVAC installations within sensitive electronic environments, demonstrate proper licensing and insurance, and be prepared to provide comprehensive documentation of equipment specifications, labor qualifications, and post-installation testing protocols to meet commissioning requirements.

POSTED

about 21 hours ago

DEADLINE

in about 1 month

DFCM Construction - Prequalified Mechanical Stage II - Davis Technical College - IDF HVAC Replacement - Project #27050220Only prequalified contractors listed on the DFCM Prequalified Contractors list as of the solicitation date are eligible to bid on this project. The State of Utah Division of Facilities Construction and Management is seeking bids to remove and replace the existing data room split system HVAC units in both the Main Building and the Barlow Building at Davis Technical College. The estimated construction cost for the project is $60,000.00. The solicitation, identified as CS27010, was posted on July 23, 2026, with a response deadline of August 25, 2026. All bids must be submitted through the designated online portal, and inquiries should be directed to Mike Smith at mikesmith@utah.gov. The project is located in Utah and follows the Stage II bidding process under DFCM’s prequalification framework for mechanical contractors.

POSTED

about 21 hours ago

DEADLINE

in about 1 month

HVAC System InstallationThe contract entails the supply, installation, and commissioning of HVAC systems for municipal facilities and pump station buildings under the jurisdiction of California’s Public Works & Utilities department. The work is classified under NAICS code 238220, indicating it falls within the specialty trade contracting sector for heating, ventilation, and air conditioning systems. The project is issued as a subcontract and has a response deadline of August 25, 2026, with the solicitation posted on July 23, 2026. Performance is expected to occur at municipal sites within California, though specific locations are not detailed. The contract does not specify a set-aside designation or point of contact, and all relevant information and submissions must be accessed through the provided online portal.

Public Works & Utilities

POSTED

about 21 hours ago

DEADLINE

in about 1 month

Job Order Contract (JOC) S26-58-Solano CampusThe California State University Trustees are soliciting sealed bids for Job Order Contract S26-58 at the Solano Campus, with all proposals to be submitted through Public Purchase. The solicitation, numbered 0000039864, seeks comprehensive labor and materials to perform maintenance, repairs, and other assigned work under a job order contract structure. Bids must be submitted by the deadline of August 25, 2026, at 10:00 PM Pacific Time, with the solicitation posted on July 23, 2026. The contract will be executed for work located in California, specifically serving the Cal Poly San Luis Obispo campus under the oversight of the California State University system. Jeanette Myers is the primary point of contact, reachable at jmyers15@calpoly.edu, and further details are available via the official procurement portal at the provided link.

Cal-Poly San Luis Obispo

POSTED

about 21 hours ago

DEADLINE

in about 1 month

Energy Storage System InstallationThe contract is for the installation of residential battery energy storage systems that are integrated with solar photovoltaic systems, targeting residential properties within the jurisdiction of the Water & Power Department in California. The work falls under NAICS code 238220, which classifies it as electrical contracting services, indicating that qualified contractors with expertise in both solar and battery system installations are required to perform the work. The contract is structured as a subcontract, suggesting it supports a larger initiative likely managed by or on behalf of the agency to enhance residential energy resilience and renewable energy adoption. The solicitation is open for responses until August 21, 2026, and the place of performance is not yet specified, implying that locations may be determined based on project prioritization or eligibility criteria set by the agency. While no set-aside classification is indicated, the focus on residential systems suggests potential emphasis on equitable access or community-based energy goals. Contractors must be prepared to comply with technical standards for integration, safety, and grid interconnection, and will be expected to deliver turnkey solutions that ensure seamless operation between solar generation and battery storage components. The contract is administered through the agency’s procurement portal, and interested parties should consult the provided link for detailed technical specifications and submission guidelines.

Water & Power Department

POSTED

about 22 hours ago

DEADLINE

Solar Energy System InstallationThe contract is for the installation of residential solar photovoltaic systems aimed at customers enrolled in a solar loan program, under the oversight of the Water & Power Department in California. It is structured as a subcontract with the NAICS code 238220, which classifies it under solar energy system installation services. The solicitation was posted on July 23, 2026, and responses are due by August 21, 2026, at 10:00 PM. The work must be performed within the service area of the agency, though specific city or zip code details are not provided. Despite the absence of a solicitation number and set-aside classification, the intent is clearly to support residential solar adoption through financed installations, requiring qualified contractors to deliver turnkey photovoltaic systems compliant with local utility and regulatory standards.

Water & Power Department

POSTED

about 22 hours ago

DEADLINE

Irrigation System Inspection and RepairThe contract pertains to the routine inspection, repair, winterization, and optimization of existing irrigation systems that serve lawns and ornamental areas under the jurisdiction of the Trinity River Authority of Texas. Work will be performed to ensure the efficient and sustainable operation of these systems throughout the year, with special attention given to seasonal preparation and performance enhancements. The scope includes identifying system malfunctions, replacing damaged components, adjusting irrigation schedules for water conservation, and preparing infrastructure for winter conditions to prevent freeze damage and maintain long-term reliability. This is a subcontract opportunity classified under NAICS code 238220, which corresponds to specialty trade contractors engaged in irrigation system installation and maintenance. The solicitation was posted on July 23, 2026, and responses are due by August 12, 2026. All work is expected to be conducted within the geographic area served by the Trinity River Authority of Texas, though specific locations are not detailed in the provided data. Contractors interested in this opportunity must be prepared to meet performance standards focused on water efficiency, system longevity, and adherence to local environmental and operational guidelines.

Trinity River Authority of Texas

POSTED

about 23 hours ago

DEADLINE

Utility and Underground PipingThe contract titled Utility and Underground Piping involves the installation of water, sewer, storm drainage, and associated underground utility lines, encompassing all necessary activities such as trenching, pipe laying, backfilling, and system testing to ensure proper functionality and compliance with standards. The work is to be performed in Canton, and the scope requires specialized construction expertise focused on subsurface infrastructure to support public utility networks. The contract is issued as a subcontract under NAICS code 238220, indicating it pertains to utility system construction services. The solicitation was posted on July 23, 2026, with a response deadline of August 26, 2026, providing potential bidders just over four weeks to prepare and submit proposals. The contracting entity is the Stark Metropolitan Housing Authority, acting under the authority of the State of Ohio, which implies adherence to state regulations and public procurement guidelines. Although specific details on set-aside status and point of contact are not provided, bidders must ensure full compliance with technical, safety, and scheduling requirements for underground utility work in the designated location. All submissions must be made through the specified online portal by the stated deadline.

Stark Metropolitan Housing Authority

POSTED

about 23 hours ago

DEADLINE

in about 1 month

CSP RFP - Fowler, Hughes and Schuhmacher Halls Plumbing Riser Replacement - Texas A&M UniversityTexas A&M University, through the Texas A&M University System Office of Facilities Planning & Construction, is seeking qualified contractors via a Competitive Sealed Proposal process to replace plumbing risers, exhaust ductwork, and perform associated restroom renovations across Fowler, Hughes, and Schuhmacher Halls in College Station, Texas. The scope of work encompasses comprehensive upgrades to 157 restrooms located within these three multi-story residential buildings, addressing aging infrastructure to improve functionality, safety, and compliance with modern building standards. All work must be executed with minimal disruption to student housing operations and in accordance with university-specific construction protocols. Proposals must be submitted by September 16, 2026, in response to solicitation number TAMUS-CSP-02-3466, which was posted on July 23, 2026. The project falls under the jurisdiction of the state and local education government agency and is managed by Paul Martinez of Arkitex, who serves as the primary point of contact for questions and clarifications; inquiries should be directed to his provided email and phone number. The place of performance is exclusively within the designated campus facilities in Texas, and interested parties are expected to coordinate site assessments and comply with all university access and operational requirements outlined in the solicitation documents through the Texas SmartBuy portal.

Texas A&M University System

POSTED

about 23 hours ago

DEADLINE

in about 2 months

More opportunities from Utah

Same awarding agency

Utah Tech University - Ice Cream FreezerUtah Tech University is soliciting bids for the procurement of an ice cream freezer to support campus food service operations, ensuring reliable storage of frozen products that meet the institution’s operational, capacity, and performance standards. The solicitation, identified by number 27-0722, was posted on July 23, 2026, with responses due by August 3, 2026, at 6:00 PM MT. The equipment must be capable of sustaining the demands of university dining services while maintaining consistent freezing conditions for ice cream and related frozen items. The procurement is open to qualified vendors and will be fulfilled at the university’s location in Utah, with no specific set-aside or NAICS code indicated. All inquiries and submissions must be made through the official Bonfire Hub portal linked in the posting.

Air-Conditioning and Warm Air Heating Equipment and Commercial and Industrial Refrigeration Equipment Manufacturing

POSTED

about 19 hours ago

DEADLINE

Utah Tech University - 700 E Street Light ProjectUtah Tech University is soliciting bids for the installation of historical street lighting along the 700 East corridor in St. George, Utah, requiring electrical and civil construction contractors to provide all necessary labor, materials, equipment, and services. The project aims to enhance the corridor’s aesthetic and functional qualities with historically accurate lighting fixtures, and all qualified contractors are eligible to submit proposals. Bidders who hold an active Utah State Cooperative Contract for Electrical or Construction Services may receive evaluation preference, and those individuals are strongly encouraged to include their State Master Agreement contract number with their submission to ensure proper consideration. The solicitation, numbered 27-003, was posted on July 23, 2026, and responses must be submitted no later than August 13, 2026, at 6:00 PM Mountain Time. The work will take place in St. George, Utah, and all bids must be submitted through the designated online portal.

Framing Contractors

POSTED

about 19 hours ago

DEADLINE

Accessory Procurement and IntegrationThe contract pertains to the procurement and integration of one complimentary NETZSCH accessory, which may be either an automation module or an advanced software license, with the option to include additional accessories beyond the initial offering. This subcontract is solicited under the NAICS code 334511, indicating activity within the analytical instrument manufacturing sector, and is issued by the state of Utah through its designated agency office. Interested parties must respond by the deadline of August 4, 2026, at 4:00 PM, with the opportunity posted on July 23, 2026. While no specific point of contact or detailed location information is provided, the procurement is accessible via a public online portal linked to the Utah contracting platform. The agreement supports the integration of technical enhancements to existing equipment, aimed at improving operational efficiency or data analysis capabilities through NETZSCH's proprietary solutions.

Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

POSTED

about 19 hours ago

DEADLINE

Consumables Supply with Discount ProgramThe contract pertains to the supply of consumables essential for thermal analysis testing, including crucibles, sensors, sample holders, and calibration standards, with a mandatory 15% discount applied to all items except high-temperature graphite and ceramic components, which are excluded from the discount. The solicitation is structured as a subcontract and falls under the NAICS code 423490, indicating a focus on wholesale trade of miscellaneous durable goods. The opportunity was posted on July 23, 2026, with a firm response deadline of August 4, 2026, at 4:00 PM, requiring vendors to submit proposals within this timeframe. The contracting entity is the State of Utah, though specific office details and point of contact information are not provided. The place of performance and delivery specifics are also unspecified in the provided data, leaving implementation logistics to be determined by the selected vendor. All submissions must be made through the designated portal at the provided hyperlink.

Other Professional Equipment and Supplies Merchant Wholesalers

POSTED

about 19 hours ago

DEADLINE

In-House Repair and Refurbishment of Instrument ComponentsThe contract seeks qualified vendors to perform in-house repair, refurbishment, or remanufacturing of failed instrument modules including balance systems, load cells, and DSC sensors, all to meet original equipment manufacturer specifications. Work must be completed to ensure restored components function as intended, with quality standards aligned to the OEM’s original design and performance benchmarks. This subcontract opportunity is open to vendors capable of handling precision instrumentation repair with the technical expertise and facilities required to restore high-sensitivity components without compromising integrity or accuracy. The solicitation was posted on July 23, 2026, with responses required by August 4, 2026, at 4:00 PM. The North American Industry Classification System code is 811212, indicating the focus is on commercial and industrial machinery and equipment repair and maintenance. The contract is issued under the auspices of the Utah agency, though specific location details such as city, state, or address are not provided. Bidders must be prepared to meet all technical requirements outlined by the agency and deliver components that are fully functional, fully documented, and traceable to OEM standards to ensure long-term reliability and compliance.

Computer and Office Machine Repair and Maintenance

POSTED

about 19 hours ago

DEADLINE

Replacement Parts Supply for Thermal Analysis InstrumentsThe contract pertains to the supply of OEM or OEM-approved replacement components for thermal analysis instruments, specifically including DSC cells, thermocouples, heating elements, balance systems, laser rods, and TEC elements, all of which must adhere strictly to the original equipment manufacturer's specifications to ensure compatibility and performance. These components are critical for maintaining the accuracy and reliability of thermal analysis equipment used in laboratory and industrial settings. The contract is classified as a subcontract with a NAICS code of 334516, indicating it falls under the category of instrumentation manufacturing for laboratory and measuring devices. The solicitation was posted on July 23, 2026, with a mandatory response deadline of August 4, 2026, at 4:00 PM. The contracting entity is listed as Utah, with the agency organization name also identified as Utah, though no specific office address or point of contact details are provided. The place of performance and other location specifics remain unspecified, and no set-aside type or additional eligibility criteria are indicated. The opportunity is accessible via the provided Bonfire Hub link, and interested parties must submit responses by the stated deadline to be considered for award.

Analytical Laboratory Instrument Manufacturing

POSTED

about 19 hours ago

DEADLINE

Laboratory Instrument Preventative Maintenance & Calibration ServicesThe contract outlines a comprehensive service agreement for on-site annual preventative maintenance, factory-level calibration, and performance verification of high-precision thermal analysis instruments, specifically including the LFA 467 HT model, all conducted in strict accordance with original equipment manufacturer protocols. These services are essential to ensure the continued accuracy, reliability, and compliance of laboratory instrumentation used in critical thermal analysis applications. The work is expected to be performed at the client’s location, with all procedures aligned to OEM specifications to maintain instrument integrity and operational standards. This is a subcontract opportunity posted on July 23, 2026, with a response deadline of August 4, 2026. It falls under NAICS code 541380, which categorizes it within other scientific and technical consulting services. The contracting entity is the state of Utah, with Utah listed as both the agency name and organizational name, though no specific office address, place of performance details, or point of contact information is provided. Interested parties must submit proposals through the specified online portal by the stated deadline to be considered for award.

Testing Laboratories and Services

POSTED

about 19 hours ago

DEADLINE

Part 8 - FinalThe Utah Division of Purchasing intends to award a five-year sole-source service contract to NETZSCH for the maintenance, repair, and calibration of four specialized laboratory instruments at the USREL facility in Utah, citing statutory authority under Utah Code Section 63G-6a-802 and R33-8-101c, which permit non-competitive procurement when only one source can perform the required services. The justification centers on the proprietary nature of the equipment, including unique software, calibration protocols, and OEM-specific parts, which make NETZSCH the sole vendor capable of delivering OEM-level support. The contract includes unlimited on-site service visits, annual preventative maintenance with factory calibration, software upgrades when available, in-house repair capabilities, and a 15% discount on consumables—excluding certain high-temperature components—with one free accessory provided. The total estimated contract value is $278,502.50, with an additional $20,000 allocated for consumables, totaling up to $298,502.50, funded through a combination of federal and state appropriations. No competitive process is being used, and evaluation is based solely on the statutory determination of sole-source eligibility, without any scoring, weighting, or trade-off analysis. Performance is to occur entirely at the USREL facility in Utah under F.O.B. Destination terms with freight prepaid by NETZSCH, and acceptance will be conducted by the government upon completion of on-site services. The contract includes a one-time $1,750 Instrument Health Inspection as a pre-condition for service commencement but does not allow for renewals or extensions beyond the five-year term. Special requirements include mandatory compliance with Utah’s Anti-Boycott laws, prohibiting participation in any economic boycott of the State of Israel or related industries, and a no-export clause prohibiting the re-export of goods to Russia or Belarus. Market research affirming the absence of alternative vendors is required and documented, though no UEI, CAGE, size status, or socioeconomic certifications were provided by the vendor. The contract is being processed without standard procurement due to impracticability of competition, and the Division of Purchasing must provide written approval prior to award. Submissions are due by August 4, 2026, via Utah’s online procurement portal, and all documentation must support the sole-source justification with no formal FAR clauses or standardized evaluation factors applied.

POSTED

about 19 hours ago

DEADLINE

Mechanical Subcontractor Coordination and DocumentationThe contract requires the mechanical subcontractor to prepare and submit detailed shop drawings, product data, and coordination models to ensure accurate installation and integration of mechanical systems. All submissions must align with the DFCM submittal standards and adhere strictly to pipe marking requirements, ensuring uniformity, safety, and compliance throughout the project. The work involves close coordination with other trades to prevent conflicts and maintain construction timelines, with documentation serving as a critical component for approval and field execution. This subcontract, titled Mechanical Subcontractor Coordination and Documentation, is issued by the state of Utah under NAICS code 541330 and is open for responses until August 25, 2026. The scope is focused on technical documentation and coordination rather than direct construction, emphasizing precision in submittals and adherence to established protocols. While no specific location or point of contact is provided, the work is expected to support projects within Utah, with all deliverables evaluated against the mandated specifications to ensure system integrity and regulatory compliance.

Engineering Services

POSTED

about 21 hours ago

DEADLINE

in about 1 month

Vibration Isolation and Seismic Restraint Supply/InstallationThe contract mandates the supply and installation of vibration isolators and seismic restraints for HVAC equipment to ensure compliance with ICC-ES, OSHPD, and CIF 1.0 standards, focusing on structural safety and performance under seismic and dynamic loads. All materials and workmanship must meet rigorous engineering specifications to protect building systems and occupants, with particular emphasis on certified components and approved installation methodologies that align with these authoritative codes. The opportunity is structured as a subcontract with a response deadline of August 25, 2026, and was posted on July 23, 2026, under the NAICS code 332999 for other fabricated metal product manufacturing. Performance will occur within Utah, though specific location details are not provided. The procurement is administered through the Utah agency’s BonfireHub platform, and all submissions must adhere to the technical and regulatory requirements outlined in the solicitation without deviation.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 21 hours ago

DEADLINE

in about 1 month

Electrical Interconnection and Code ComplianceThe contract requires the installation of electrical wiring, disconnects, and circuit protection systems for new HVAC units, all in strict adherence to NFPA 70 standards and National Recognized Testing Laboratory (NRTL) testing requirements. This work must ensure safe, code-compliant electrical connections that support the reliable operation of the HVAC systems while meeting all applicable safety and performance benchmarks. The scope is focused on the electrical interconnection aspects only, with no additional mechanical or ductwork responsibilities implied. The contract is classified as a subcontract under NAICS code 238210, with a posting date of July 23, 2026, and a response deadline of August 25, 2026. It is issued by the State of Utah, with no specific location provided for performance, and no set-aside type or agency office details are specified. All proposals must demonstrate full compliance with current electrical codes and NRTL certification standards, and bidders are expected to have the technical expertise and documentation to prove adherence to these requirements without reliance on external citations or referenced files.

Electrical Contractors and Other Wiring Installation Contractors

POSTED

about 21 hours ago

DEADLINE

in about 1 month