Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, December 9 at 2:00 PM ET

Register Free →

This Special Notice opportunity from Department Of Energy was posted on July 20, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Hydropower Testing Network (HyTN) Round 2 — No-Cost Technical Assistance Vouchers for Small Businesses

Closed
BD-011Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 221111
SLED
Bucks Creek Hydroelectric Project (FERC Project No. 619)
Solicitation # 2019069104
Pacific Gas and Electric Company is seeking water quality certification for the Bucks and Grizzly Creek Gravel Augmentation Project in Plumas County, California. This initiative implements the Gravel Augmentation Plan required by Condition 14 of the Bucks Creek Hydroelectric Project certification to enhance trout spawning habitats and populations. The project involves placing gravel at two specific sites: one on Bucks Creek approximately 0.3 miles downstream of the Lower Bucks Dam Spillway, and another on Grizzly Creek about 400 feet downstream of the gaging weir. To facilitate these activities, the company is pursuing Clean Water Act Section 404 permitting under the United States Army Corps of Engineers Regional General Permit 16 for aquatic habitat restoration and enhancement. The project is governed by the California Environmental Quality Act, with a CEQA Supplement prepared to ensure environmental compliance. Notices of Determination filed by the State Water Resources Control Board confirm that the project will not have a significant environmental effect, and no mitigation measures or monitoring plans were adopted. Administrative oversight involves the State Water Resources Control Board Division of Water Rights, with the project identified under solicitation number 2019069104. Performance is centered in Plumas County, specifically near Quincy, California.
City of Santa Clara

POSTED

2 months ago

DEADLINE

N/A
NAICS: 221111
SBIR / STTR
Energy Technologies
Solicitation # NSF 26-510
The National Science Foundation issued solicitation NSF 26-510 on May 22, 2026, for the Small Business Innovation Research and Small Business Technology Transfer Phase I, Phase II, and Fast-Track programs. This SBA set-aside opportunity focuses on developing deep technologies to advance U.S. competitiveness and security, specifically within the Energy Technologies topic. The program seeks proposals covering new energy sources, power generation, energy storage, electronic systems for mobile and off-grid applications, carbon conversion, and disruptive technologies in conventional resources. It also encourages research into the intersection of energy technologies and data, as well as nature-inspired processes for sustainable energy and carbon storage. The total anticipated funding for the program is 210 million dollars, with individual award limits varying by phase: up to 305,000 dollars for Phase I, up to 1.25 million dollars for Phase II, and up to 1.55 million dollars for Fast-Track. Strategic Breakthrough proposals may request up to 30 million dollars. Proposals are evaluated based on intellectual merit, broader impacts, and commercial potential. The Principal Investigator must be primarily employed by the small business, defined as at least 51 percent employment, and must meet specific minimum effort levels depending on the phase of the award. Submission deadlines began on July 27, 2026, and continue through July 2027.
National Science Foundation

POSTED

6 months ago

DEADLINE

in 8 months
NAICS: 221111
SLED
Temporary Phase Breaker, Poles, Related Materials and Installation
Solicitation # 13145
The City of Los Angeles Harbor Department is soliciting a contractor to provide temporary power for the Cabrillo Beach Youth Aquatic Center located in San Pedro, California. The scope of work involves installing a 200a 480V 3 Phase breaker in an existing panel, replacing a 125a breaker, and installing 200a rated flex to carry the circuit overhead. Key deliverables include the installation of approximately twenty-nine 35ft poles, a 150KVA step-down transformer to provide 3 phase 120/208 power, and three 400A 120/208V 3 Phase CAM Type outlets. The contractor is responsible for obtaining all necessary LADBS permits and ensuring all work complies with OSHA, CAL-OSHA, and Los Angeles Department of Building and Safety requirements. Work must commence within 30 days of a fully executed Purchase Order, with installation completed within 60 days. The anticipated rental period is two years, with a total project duration of 730 days from commencement. Payment terms are NET 30 days, though billing discount terms of 20 days or more will be considered during evaluation. Bidders must attend a mandatory Pre-Bid Conference and Job Walk to be eligible. Required submission documents include an Acknowledgement of Insurance Requirement and a Job Specification Worksheet. Labor costs must include certified Department of Industrial Relations payroll reporting and prevailing wages. There is no specified set-aside status for this solicitation.
Harbor Department, Port of Los Angeles

POSTED

6 months ago

DEADLINE

N/A

AI Contract Overview

Show more

Idaho National Laboratory, under the U.S. Department of Energy’s Hydropower Testing Network program, is offering no-cost technical assistance vouchers to qualifying small businesses to support hydropower innovation and development. Three distinct technical capabilities are available for selection: HyTN-49, which provides integrated planning, geotechnical analysis, valuation, and optimization for hydropower systems including non-powered dams and irrigation canals; HyTN-50, covering interconnection studies, hardware-in-the-loop testing, and governor performance assessment; and HyTN-73, which delivers hydro power assessments through the HydroSHIELD capability. Each voucher enables collaborative project development between the recipient and INL, with the scope of work tailored to align with the general objectives of the chosen capability. Participation requires registration through the program’s application portal, where applicants must submit a brief project description, state their company’s purpose, and prioritize their top three capability selections. The registration deadline is July 23rd, and all eligible small businesses are encouraged to apply before the deadline to secure access to these no-cost laboratory services. The program is administered by Battelle Energy Alliance on behalf of the Department of Energy and supports small businesses with operations tied to hydropower technology advancement.

General Info

Small businesses can access no-cost hydropower technical assistance via INL vouchers before July 23.

NAICS

221111 - Hydroelectric Power Generation

Place of Performance

Idaho Falls, ID, 83401, USA

Set-Aside

NONE

Documents

0

No documents available

No documents were posted with this contract.

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

This one is closed. Find the next one like it.

Open contracts like this one, right now:

  • Renewable Electricity Product SupplyOpen now, due in 13 days
  • Potable Water SupplyOpen now, due in 6 days
See open contracts like this

Ask CLEATUS

I've read this contract. Ask me anything.

Timeline

PhaseClosed
Posted

special-notice

Response Deadline

Deadline has passed

Submission Closed

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

Show more
AgencyDepartment Of Energy → Battelle Energy Alliance–doe Cntr
Contacts1 person available
OfficeIdaho Falls, ID, 83415, USA
Office AddressIdaho Falls, ID, 83415, USA

Full Description

Show more

Idaho National Laboratory (INL) is offering no-cost technical assistance to qualifying small businesses through the Hydropower Testing Network (HyTN) voucher program. Selected recipients will receive laboratory services from INL in support of hydropower development, testing, and analysis, funded through a U.S. Department of Energy voucher initiative.


Three capabilities are available in this round:


HyTN-49 — Integrated Planning, Geotechnical Analysis, Valuation, and Optimization
Services covering hydropower, hydro-hybrids, non-powered dams, and irrigation canals.


HyTN-50 — Interconnection Analysis, Hardware-in-the-Loop Testing, and Governor Performance Assessment
Services covering hydropower interconnection studies, HIL testing, and governor performance evaluation.


HyTN-73 — HydroSHIELD Hydropower Assessment
Hydropower assessment services under the HydroSHIELD capability.


HOW TO PARTICIPATE:


Interested small businesses should identify the capability that best aligns with their project needs, then register through the program's application portal. Applicants will provide a brief description of their project and company purpose, and rank their top three voucher selections in order of priority.


The scope of work for each capability is intentionally broad and is developed collaboratively between INL and the selected recipient. Projects that align with the general scope of any listed capability may be eligible for support.


REGISTRATION DEADLINE: July 23rd


ADDITIONAL INFORMATION:
Full capability descriptions and registration are available through the links provided with this notice.

More opportunities from Department Of Energy → Battelle Energy Alliance–doe Cntr

Same awarding agency

NAICS: 335910
New
Federal
Long-Duration Energy Storage (LDES) Battery System
Solicitation # INL-26-050
Idaho National Laboratory (INL) and Argonne National Laboratory (ANL) are seeking information from organizations capable of providing non-lithium, rechargeable electrochemical long-duration energy storage (LDES) battery systems for benchmark performance testing. The requirement specifies two module-scale systems providing at least 10 kW continuous power and 100 kWh usable energy, and one full-scale system providing at least 100 kW continuous power and 1,000 kWh usable energy. All systems must be capable of at least 10 hours of continuous discharge at rated power, operate between 0 to 50 degrees Celsius with minimal performance loss, and have an estimated field lifetime of at least 15 years. Systems must include AC/DC interfaces, support SCADA protocols such as Modbus TCP/IP, DNP3, or IEC 61850, and comply with NFPA 855, UL 9540/9540A, and NEC/IEEE standards. This Expression of Interest (EOI) serves as a preliminary step to identify qualified vendors for a future Request for Proposal (RFP). Interested respondents must submit a consolidated PDF or Word document by December 8, 2026, including detailed technology descriptions, safety hazard assessments, performance data, indicative pricing, and a project schedule. Deliverables include the delivery of modules to INL within approximately three months of design acceptance and the full-scale system to ANL within approximately six months, followed by onsite commissioning and Site Acceptance Testing (SAT). There is no set-aside status specified for this opportunity.
Battery Manufacturing

POSTED

5 days ago

DEADLINE

in 17 days
View Details
NAICS: 334519
Federal
ATR Plant Protection System (PPS) Seismic Switch Replacement
Solicitation # INL-27-002
Battelle Energy Alliance, LLC (BEA), acting as the management and operating contractor for the U.S. Department of Energy-owned Idaho National Laboratory (INL), has issued an Expression of Interest (EOI) for the replacement of obsolete Kinemetrics Model TS-3A seismic switches within the Advanced Test Reactor (ATR) Plant Protection System (PPS). This EOI is intended for market research and acquisition planning to identify qualified suppliers capable of providing modern, safety-related seismic switch equipment. The required solution must feature three-axis ground motion sensing, dry contact output, adjustable trip setpoints, and in-situ testing and calibration capabilities to ensure the long-term reliability of the reactor protection function. Suppliers must demonstrate the ability to meet strict nuclear safety standards, including environmental and seismic qualifications per IEEE 323 and IEEE 344, and maintain a Quality Assurance Program consistent with ASME NQA-1 or equivalent controls. Key deliverables include complete seismic switch assemblies, mounting hardware, qualification reports, and comprehensive maintenance and installation documentation. Interested organizations must submit a concise PDF response, limited to approximately 10 pages, detailing their technical capabilities, relevant experience, and manufacturing lead times. Responses are due by April 23, 2027, and should be submitted to Chase Egbert and Stacey Hill. This notice is for research purposes and does not constitute a formal solicitation or a commitment to procure services.
Other Measuring and Controlling Device Manufacturing

POSTED

12 days ago

DEADLINE

in 5 months
View Details

Earlier notices in this NAICS code

Posted before this notice, open and closed

Get AI-powered intelligence on the opportunities still open

Every solicitation package arrives shredded into a compliance breakdown and matched to your past performance, with incumbent history and alerts on amendments and award.

Miguel
Hillary
Keith Deutsch
Christine

Join 900+ contractors already using CLEATUS