Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, September 16 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Industrial Equipment Repair & Overhaul

Active

Federal

Response Deadline09/30/2030, 10:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract, titled Industrial Equipment Repair and Overhaul, is issued by the Department of Defense through the FA9101 Aedc Pkp Procrmnt Branch. The project focuses on the overhaul and repair of major rotating industrial equipment, specifically motors, pumps, and compressors, for prime contractors operating at Air Force AEDC facility projects. The scope of work includes disassembly, inspection, root cause failure analysis, and reassembly, all performed in strict accordance with Original Equipment Manufacturer specifications to ensure the delivery of validated equipment. This effort falls under NAICS code 811310, with a response deadline set for September 30, 2030.

General Info

DoD subcontract for repairing and overhauling industrial motors, pumps, and compressors by 2030.

Agency

Department Of Defense → FA9101 Aedc Pkp Procrmnt BranchView Agency

NAICS

811310 - Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and MaintenanceView NAICS

Place of Performance

TN

Set-Aside

NONE

Documents

This scope was carved out of FA9101-26-9-Velocity_Alliance.

The full solicitation package (43 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

Request for Whitepapers: AEDC Velocity Alliance - A Multi-Billion Dollar OTA Consortium Opportunity

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedAug 31

subcontract

Response DeadlineSep 30

Submission deadline

Response Deadline

09/30/2030, 10:00:00 PM UTCin about 4 years

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → FA9101 Aedc Pkp Procrmnt Branch

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → FA9101 Aedc Pkp Procrmnt Branch

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Performs overhaul and repair of major rotating industrial equipment for prime contractors on Air Force AEDC facility projects. Executes disassembly, inspection, root cause failure analysis (RCFA), and reassembly of industrial motors, pumps, and compressors. Adheres to Original Equipment Manufacturer (OEM) specifications. Delivers repaired and validated rotating equipment.

Similar Contracts

Same NAICS industry code

1089 – Cafeteria freezer #1 & Cooler #4 Replacement

Solicitation # 26-137

This subcontracting opportunity for the Atterbury Job Corps Center in Edinburgh, Indiana, involves the full removal and replacement of Cafeteria Freezer #1 and Cooler #4. Freezer #1 requires replacement due to significant frame and door damage causing freeze-ups, while Cooler #4 must be replaced due to an inoperable unit, drainage backups, and a sagging ceiling. Additionally, the project includes correcting the exit door of the main Electrical Room to ensure compliance with NEC 2020 110.26.C (3) by installing panic hardware and ensuring the door opens toward the egress. The project is a single lump sum contract and is set aside for various small business categories, including SDB, WOSB, HUBZone, and SDVOSB. Bidders must attend a mandatory site visit on September 3, 2026, and submit proposals by September 11, 2026. Award decisions will be based on best value rather than the lowest price. Requirements include a valid Indiana Contractor's License, compliance with the Davis-Bacon Act (WD # IN20260002), and adherence to EPA and OSHA regulations. Contractors must provide a sequenced construction schedule within 10 days of the Notice to Proceed and start work within 14 days. Deliverables include all necessary training, operating manuals, and keys, with a one-year guarantee of workmanship and manufacturer warranties. Proposals must include a detailed cost breakdown, a 90-day bid guarantee, and proof of specific automobile liability and workers' compensation insurance naming Adams & Associates, Inc. as an additional insured.

Adams & Associates, Inc.

POSTED

about 9 hours ago

DEADLINE

in about 22 hours

Replace Ice-machine in café

Solicitation # 26-138

Adams & Associates, Inc. is soliciting a single lump sum contract for the full removal and replacement of a non-functional ice maker located in the cafeteria at the Atterbury Job Corps Center in Edinburgh, Indiana. The existing unit requires replacement due to a failed evaporator coil and other internal component failures. This opportunity is set aside for various small business categories, including SDB, WOSB, HUBZone, and SDVOSB. To be eligible for consideration, vendors must attend the mandatory site visit on September 3, 2026, at 3:00 PM, with final proposals due by September 11, 2026, at 3:00 PM. Award will be based on best value rather than the lowest price. Qualified contractors must hold a valid Indiana state contractor's license and provide proof of automobile liability and workers' compensation insurance, naming Adams and Associates, Inc. as an additional insured. The scope of work requires compliance with EPA and OSHA regulations, as well as Davis Bacon Act wage determinations. Deliverables include a sequenced construction schedule within 10 days of the Notice to Proceed, a one-year workmanship guarantee, and all relevant manufacturer warranties and maintenance manuals. Final payment is contingent upon the submission of a completed SF 1413, certified payroll records, and the release of liens from all subcontractors.

Adams & Associates, Inc.

POSTED

about 9 hours ago

DEADLINE

in about 22 hours

27-16 Equipment Repairs

Solicitation # 27-16

The Massachusetts agency MARB2 Procurement is seeking bids for solicitation BD-27-1293-MARB2-PROC2-133137 regarding on-call equipment repairs. The contract will be performed at the Widger Road location in Marblehead, Massachusetts. Interested parties must submit their responses by the deadline of September 23, 2026, at 3:00 PM. The primary point of contact for this procurement process is Purchaser Allison Jenkins.

MARB2 - Procurement

POSTED

about 12 hours ago

DEADLINE

Preventive Maintenance & Emergency Repair Services

260-NETWORK Contract Office 20 (36C260)

POSTED

about 14 hours ago

DEADLINE

Vehicle Management & Maintenance

POSTED

about 14 hours ago

DEADLINE

EDG Maintenance & Technical Support (On-Call)

Puget Sound Naval Shipyard IMF

POSTED

about 14 hours ago

DEADLINE

Fuel Tank Inspection, Test and Maintenance Service at Osan AB, Korea

Solicitation # W90VN626QA018

Solicitation W90VN626QA018 is a request for quotations for comprehensive fuel storage tank management services at Osan Air Base, Republic of Korea. The scope of work involves monthly and annual inspections, maintenance service calls, and repair services for approximately 365 aboveground and underground storage tanks and associated systems. The contract includes a base year starting January 1, 2027, with four subsequent option years. Key requirements include a 30-day phase-in period, 24/7 emergency response capability, and strict adherence to STI SP001, API 650/653, and various NFPA and IFC standards. A certified STI SP001 Inspector is designated as key personnel and must be available at all times, with a requirement for a replacement to be provided within 14 days of any vacancy. The government intends to award a single firm-fixed-price contract based on best value using a comparative evaluation process. Evaluation factors, listed in descending order of importance, include methodology based on a practical mock inspection, a staffing plan, past performance from the last five years, and price. While price is evaluated for fairness and reasonableness, the government may trade off price for superior technical value. The contract is funded by the ROK Ministry of National Defense, and offerors must provide specific documentation, including a tax exemption declaration and certificates of insurance for environmental liability. Quotes must be submitted via the PIEE Solicitation Module by October 7, 2026, divided into four distinct volumes covering technical approach, past performance, pricing, and administrative documentation.

0906 Aq Co Contracting Bat

POSTED

about 14 hours ago

DEADLINE

Water Tanker/Pump Repair

Solicitation # FA930126Q0030

Solicitation FA930126Q0030 is a small business set-aside request for quote for the repair and replacement of a structurally degraded agent water tank assembly and associated components on a 2011 International 7400 Fire Department Water Tender (registration 11L00144). The vehicle, which features a 4,000-gallon Pro-Poly America tank, has suffered from leaks and structural sagging. The scope of work includes the complete removal of the failing assembly, installation of a new tank capable of supporting maximum load without bowing, system integration of all plumbing and valves, and full exterior restoration including specialized painting and coating to match Fire Department specifications. All work must be performed at the contractor's facility and must meet or exceed KME manufacturer specifications as well as NFPA 1901, NFPA 1911, ASTM D1998, and OSHA 29 CFR 1910 standards. The government will award the contract based on a comparative evaluation of technical capability, past performance, price, delivery, and warranty to determine the best overall value. Vendors must demonstrate proven experience servicing KME fire apparatus and possess the necessary tooling and diagnostic capabilities. The estimated period of performance is 240 days after receipt of order. Quote submissions are due by September 8, 2026, at 4:00 PM PST, though this deadline may be moved up to September 4 if no site visits are requested by August 24. All submitted quotes must remain valid for at least 30 days.

FA9301 Aftc Pzio

POSTED

about 14 hours ago

DEADLINE

Kolene Salt Bath PM & ER

Solicitation # W911KF26QA058

The Kolene Salt Bath PM and ER contract, identified by solicitation number W911KF26QA058, is a presolicitation opportunity issued by the Department of Defense through the W6QK Acc Anad agency. The project focuses on the cleaning and maintenance of Kolene molten salt baths and is located in Anniston, Alabama. This opportunity is designated as a total small business set-aside under NAICS code 811310. Interested parties must submit their responses by the deadline of September 24, 2026. The primary point of contact for this requirement is Zena Johnson, with Heather Robinson serving as the secondary contact. All performance activities will take place at the specified facility in Anniston, Alabama.

POSTED

about 14 hours ago

DEADLINE

J--Transformer Refurbishment

Solicitation # 89503326QWA000417

The Western Area Power Administration, under the Department of Energy's Western-Sierra Nevada Region, is seeking proposals for the refurbishment of the Corning KY3A Transformer. This solicitation, identified by number 89503326QWA000417, falls under NAICS code 811310 and is managed from the office located in Folsom, California. The primary objective of this notice is to extend the RFQ close date to September 14, 2026, at 10:00 PD. Interested parties must submit their responses by the final deadline of September 14, 2026, at 17:00. Andrew Mika serves as the primary point of contact for this procurement process.

Western-Sierra Nevada Region

POSTED

about 14 hours ago

DEADLINE

61--STATION, IN REPAIR/MODIFICATION OF

Solicitation # N0038326QBB13

This presolicitation contract, issued by the Navsup Weapon Systems Support under the Department of Defense, concerns the repair and modification of station equipment. The requirement is for seven units of NSN 7R-6110-016903267-V2, adhering to TDP version 001, with delivery terms specified as FOB Origin. The solicitation, numbered N0038326QBB13, was posted on September 9, 2026, with a response deadline of October 26, 2026. The contracting office is located in Philadelphia, Pennsylvania, and the primary point of contact for this effort is Michael J. Keith.

Navsup Weapon Systems Support

POSTED

about 14 hours ago

DEADLINE

in about 2 months

Sources Sought - Cart Washer Maintenance Services for the Minneapolis VA Medical Center

Solicitation # 36C26327Q0016

The Department of Veterans Affairs, through Network Contract Office 23, is conducting market research via a sources sought notice for cart washer maintenance services at the Minneapolis VA Medical Center. This effort, identified by solicitation number 36C26327Q0016, seeks to identify capable service providers under NAICS code 811310 to perform maintenance as detailed in the provided Statement of Work. The opportunity is open for responses until September 16, 2026, and there is currently no specific set-aside designated for this requirement. Interested parties should direct inquiries to the primary point of contact, Alisha Milander, regarding the performance of these services in Minneapolis, Minnesota.

Network Contract Office 23 (36C263)

POSTED

about 14 hours ago

DEADLINE

More opportunities from Department Of Defense → FA9101 Aedc Pkp Procrmnt Branch

Same awarding agency

RWP Independent Air Supply

Solicitation # FA9101269IAS

The Arnold Engineering Development Complex at Arnold Air Force Base, Tennessee, is seeking white papers for the Independent Air Supply project under the authority of 10 U.S.C. section 4022. The objective is to establish a secondary, dedicated, and conditioned air supply for an existing test cell. The scope of work includes the demolition of existing equipment and the design, procurement, fabrication, and installation of a system featuring at least four modular compressor units, dryers, heaters, expansion turbines, and a final mixing chamber. The system must integrate with base utilities and utilize a local control network featuring Emerson RX3i PLCs, Proficy Machine Edition programming, and a Simplicity HMI interface capable of supporting simultaneous unclassified and classified operations. The government may award up to two prototype agreements, with a preference for base milestone pricing around 250,000 dollars, though this is not a strict ceiling. All final engineering drawings and analyses must be stamped by a Professional Engineer licensed in Tennessee, and air purity must comply with ISO 8573-1 Class 1P. Evaluation of submissions will involve a go/no-go compliance check followed by a qualitative review of technical capability, schedule feasibility, and cost realism. The submission deadline for white papers has been extended to September 23, 2026. Interested parties must verify their CAGE code, Joint Certification Program, and CMMC status to access export-controlled Distribution D documents.

Engineering Services

POSTED

DEADLINE

High-Voltage Electrical Infrastructure UpgradesThis subcontract for High-Voltage Electrical Infrastructure Upgrades supports Air Force AEDC facility projects by upgrading high-voltage substations exceeding 6.9kV and installing medium-voltage distribution networks. The scope of work involves the installation of high-voltage transformers, switchgear, and medium-voltage cabling specifically designed to power large industrial motors. Managed by the Department of Defense under the FA9101 Aedc Pkp Procrmnt Branch, the project requires strict adherence to high-voltage safety standards and NETA certifications to ensure the delivery of fully operational infrastructure. The contract falls under NAICS code 238210 and has a response deadline of September 30, 2030.

Electrical Contractors and Other Wiring Installation Contractors

POSTED

DEADLINE

in about 4 years

Low-Pressure Process Piping InstallationThis subcontract involves the design, fabrication, and installation of low-pressure process piping systems, specifically those rated at or below 150 PSIG, for prime contractors working on Air Force AEDC facility projects. The scope of work includes the installation of piping for various gas and fluid media, with all testing and turnover procedures conducted in accordance with ASME B31.3 industry standards. Managed by the Department of Defense under the FA9101 Aedc Pkp Procrmnt Branch, the contract falls under NAICS code 238220. The project requires the delivery of fully installed and tested low-pressure piping systems, with a response deadline set for September 30, 2030.

Plumbing, Heating, and Air-Conditioning Contractors

POSTED

DEADLINE

in about 4 years

High-Pressure & Hazardous Process Piping InstallationThis subcontract with the Department of Defense, specifically the Air Force AEDC facility, involves the design, fabrication, and installation of complex high-pressure and hazardous process piping systems. The scope of work focuses on systems exceeding 150 PSIG and requires strict adherence to ASME B31.3 standards, encompassing all testing and turnover processes. The project demands specialized welding certifications for high-pressure systems and the implementation of hazardous material containment. Under NAICS code 238220, the contractor is responsible for delivering fully installed and certified piping systems for prime contractors. The response deadline for this opportunity is September 30, 2030.

Plumbing, Heating, and Air-Conditioning Contractors

POSTED

DEADLINE

in about 4 years

Advanced Mechanical Engineering ServicesThe Advanced Mechanical Engineering Services subcontract supports prime contractors on Air Force AEDC projects by providing conceptual planning, detailed design, and analysis of non-standard mechanical components. The scope of work includes performing trade studies, cost estimates, and verification and validation specifically for high-pressure and high-temperature applications. To ensure technical compliance and quality, the contractor must hold a Professional Engineer license. Beyond design, the contractor is responsible for managing the procurement and fabrication processes to deliver complete engineering design packages and validated components. This effort is managed under the Department of Defense through the AEDC Pkp Procurement Branch, falling under NAICS code 541330. The contract period extends through September 30, 2030.

Engineering Services

POSTED

DEADLINE

in about 4 years

Specialized Fire Suppression Systems InstallationThis subcontract involves the design, installation, and testing of specialized fire suppression systems for prime contractors working on Air Force AEDC facility projects. The scope of work includes performing hazard analyses and installing deluge, foam, or clean agent systems using specific chemicals and equipment. All work must strictly adhere to NFPA codes to ensure the delivery of certified and tested fire suppression systems. Managed by the Department of Defense under the FA9101 Aedc Pkp Procurement Branch, the project falls under NAICS code 238220. The contract was posted on August 31, 2026, with a response deadline set for September 30, 2030.

Plumbing, Heating, and Air-Conditioning Contractors

POSTED

DEADLINE

in about 4 years

Site-Wide Utility Distribution InstallationThis subcontract for the Department of Defense, managed by the FA9101 AEDC Pkp Procurement Branch, involves the installation and maintenance of site-wide utility systems including water, steam, and gas for prime contractors at Air Force AEDC facilities. The scope of work encompasses trenching, pipe laying, and system tie-ins based on distribution capacity analysis, utilizing specialized excavation equipment and utility piping to deliver a fully operational distribution network. All work must be performed in strict accordance with local and federal utility codes. The project falls under NAICS code 237310 and has a response deadline of September 30, 2030.

Highway, Street, and Bridge Construction

POSTED

DEADLINE

in about 4 years

Specialized Industrial ConstructionThis subcontract for Specialized Industrial Construction involves the erection of heavy industrial structures and the modification of existing facilities for prime contractors on Air Force AEDC projects. The scope of work focuses on accommodating specialized test equipment through structural steel erection and specialized foundation work, utilizing heavy structural steel and specialized concrete. Managed by the Department of Defense under the FA9101 Aedc Pkp Procurement Branch, the project falls under NAICS code 236210. A critical requirement for this contract is that all structural steel work must be performed by AWS certified personnel to ensure the delivery of completed industrial structures or modified facilities.

Industrial Building Construction

POSTED

DEADLINE

in about 4 years

ID&C Engineering & InstallationThis subcontract for ID&C Engineering and Installation supports prime contractors on Air Force AEDC facility projects through the Department of Defense. The scope of work encompasses the full lifecycle of instrumentation, data, and control services, including the analysis, design, programming, and commissioning of critical systems. Key technical responsibilities involve programming PLCs, designing control panels, developing HMI screens, and performing software validation using various sensors and controllers to ensure fully commissioned systems with verified data acquisition. The contract is categorized under NAICS code 541330 and is managed by the FA9101 Aedc Pkp Procurement Branch. The performance period extends through a response deadline of September 30, 2030, focusing on the delivery of high-precision engineering and installation services for specialized facility projects.

Engineering Services

POSTED

DEADLINE

in about 4 years

Low-Voltage Electrical & Controls InstallationThis subcontract for the Department of Defense, managed by the FA9101 AEDC Pkp Procurement Branch, involves the installation of low-voltage power and controls for prime contractors at Air Force AEDC facilities. The scope of work includes the installation of motor control centers, building power distribution, and the integration of control systems using low-voltage switchgear, all of which must adhere to National Electrical Code standards. The project falls under NAICS code 238210 and focuses on delivering fully installed low-voltage power distribution and control systems. The contract was posted on August 31, 2026, with a response deadline set for September 30, 2030.

Electrical Contractors and Other Wiring Installation Contractors

POSTED

DEADLINE

in about 4 years

Request for Whitepapers: AEDC Velocity Alliance - A Multi-Billion Dollar OTA Consortium Opportunity

Solicitation # FA9101-26-9-Velocity_Alliance

The AEDC Velocity Alliance is a strategic consortium established by the Department of the Air Force, through the Air Force Test Center and Arnold Engineering Development Complex, to accelerate the modernization, restoration, and sustainment of critical national test infrastructure. Operating under the authority of 10 U.S.C. section 4022, this initiative utilizes Other Transaction Agreements (OTAs) rather than standard FAR-based contracts to create an agile industrial base. The consortium will execute a multi-billion dollar portfolio of complex engineering and construction projects, with a near-term forecast of approximately 135 projects valued at 550 million dollars for fiscal years 2026 and 2027. Once established, all project opportunities will be competed exclusively among pre-qualified Alliance members. To gain membership, vendors must submit a whitepaper that passes a four-part evaluation covering technical competency, acceptance of the government's intellectual property framework, and the capability to partner with non-traditional defense contractors, small businesses, or nonprofit research institutions. Technical requirements span 15 categories, including high-pressure process systems, high-voltage electrical infrastructure, and specialized industrial construction. Mandatory certifications include the Joint Certification Program and Cybersecurity Maturity Model Certification (CMMC), with a requirement for CMMC Level 2 or a NIST SP 800-171 assessment. The consortium activation date is set for July 1, 2026, with the request for whitepapers remaining active through September 30, 2032.

Engineering Services

POSTED

DEADLINE

in about 4 years

Process Air Dehumidification Coolers & Process Air Exhaust Coolers

Solicitation # FA910126RCoolers

The Air Force Test Center's Installation Contracting Division at Arnold Air Force Base in Tennessee is seeking capable sources for the design, fabrication, and delivery of high-performance replacement cooling coil assemblies and auxiliary equipment. This sources sought notice is for informational purposes to identify interested vendors and does not constitute a formal solicitation or commitment to award a contract. The anticipated NAICS code for this requirement is 332410 for Power Boiler and Heat Exchanger Manufacturing. Interested vendors must submit their company information, SAM Unique Entity Identifier, and an overview of their technical capabilities to Haley Smith by 2:00 PM Central Time on September 30, 2026. Because the detailed Statement of Objectives is export controlled under Distribution Statement D, access is restricted to Department of Defense and U.S. DoD contractors who must provide their CAGE code and confirm JCP and CMMC status to receive the encrypted documentation.

Power Boiler and Heat Exchanger Manufacturing

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 650+ contractors already using CLEATUS