Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Integrated OR Video System Installation & Configuration

Active

Federal

Response Deadline08/19/2026, 03:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract requires the installation and configuration of a 4K video routing and display system specifically designed for use in an operating room, ensuring seamless integration with existing medical infrastructure. This includes the secure mounting of high-resolution displays, precise cabling for video signals, and comprehensive validation of signal integrity to guarantee latency of no more than 200 milliseconds, critical for real-time surgical visualization and decision-making. All work must be conducted in compliance with healthcare environment standards to avoid interference with sensitive equipment and maintain sterility protocols. The project is being managed under the Department of Veterans Affairs through the 256-NETWORK Contract Office 16 and is classified under NAICS code 238210 for electrical contracting services. Performance of the work is required at a facility in Biloxi, Mississippi, with a zip code of 39531. The solicitation was posted on July 23, 2026, and responses must be submitted by August 19, 2026, at 3:00 PM. The contract is issued as a subcontract and does not specify any set-aside designations, indicating open competition for qualified vendors with expertise in medical-grade video systems and surgical environment installations.

General Info

Install 4K video system in Biloxi OR with ≤200ms latency under VA contract, compliance required.

Agency

Department Of Veterans Affairs → 256-NETWORK Contract Office 16 (36C256)View Agency

NAICS

238210 - Electrical Contractors and Other Wiring Installation ContractorsView NAICS

Place of Performance

Biloxi, MS, 39531, USA

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 23

subcontract

Response DeadlineAug 19

Submission deadline

Response Deadline

08/19/2026, 03:00:00 PM UTCin 26 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Veterans Affairs → 256-NETWORK Contract Office 16 (36C256)

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Veterans Affairs → 256-NETWORK Contract Office 16 (36C256)

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Installation and configuration of a 4K video routing and display system in an operating room, including display mounting, cabling, and signal integrity validation with latency ≤200 ms.

Similar Contracts

Same NAICS industry code

Elevator Lobby 2 Way CommunicationsThe contract involves the installation of 23 new two-way communication boxes in elevator lobbies across the terminal, including 17 main elevators, three service elevators, and three ramp landing elevators. This work is part of a larger effort to enhance safety and communication capabilities within the airport infrastructure. The project is forecasted by the Aviation Project Management Group under the Port of Seattle and falls under NAICS code 238210, indicating it is related to electrical contracting services. Point of contact for the solicitation is Angela Peterson, with Christina Burdett serving as the project manager. While no solicitation number has been assigned yet and details regarding set-aside status or specific performance location are not provided, the posting date indicates this is a future opportunity with a planned timeline in 2026. Interested parties should monitor the official portal link for updates and potential release of a formal solicitation.

Aviation Project Management Group

POSTED

about 6 hours ago

DEADLINE

Variable Frequency Drives (VFD) Replacement Phase 3 (DBB)The Port of Seattle is preparing to replace the final 125 aging Robicon variable frequency drives (VFDs) as part of Phase 3 of its VFD replacement initiative. This effort involves removing the failing units and installing new, modern VFDs capable of integrating seamlessly with the Port’s Direct Digital Controller (DDC) system to enable real-time energy usage monitoring, output control, and efficiency tracking. The scope includes all necessary wiring, testing, commissioning, and ancillary equipment to ensure a fully operational and reliable system. The work falls under the NAICS code 238210 for electrical contracting and is being managed by the Aviation Facilities & Infrastructure division. Primary point of contact for inquiries is Yanet Maldonado, with Sharon Miick serving as the Project Manager. The solicitation was posted on July 24, 2026, and the project is expected to proceed as a design-bid-build procurement.

Aviation Facilities & Infrastructure

POSTED

about 6 hours ago

DEADLINE

Operational Security Cameras Bagwell and North Cargo AreasThe contract will deliver design, permitting, and construction services to install 50 high-resolution cameras across 43 sites in the Bagwell and North Cargo Operations areas at the Port of Seattle. The primary objective is to enhance surveillance capabilities in key operational zones to support forensic investigations and enforce the Port’s movement rules and regulations. Current camera coverage is limited to conveyor systems and security doors, and this project will expand visibility along main terminal drive lanes and entrances in the Bagwell area to close critical monitoring gaps. In the North Cargo area, flexible camera coverage will be implemented using pan-tilt-zoom units that allow user-controlled adjustment to effectively monitor broad surface areas and address dynamic operational needs. The project involves a comprehensive integration of upgraded technology to replace outdated systems and ensure continuous, high-quality video surveillance across both operational zones. The work will be managed by the Aviation Project Management Group under the Port of Seattle, with primary point of contact Angela Peterson and project manager Randa Williams. The scope is classified under NAICS code 238210, indicating construction of electrical systems and related infrastructure. The solicitation was posted in July 2026 and will support long-term security improvements as part of the Port’s broader operational integrity initiatives.

Aviation Project Management Group

POSTED

about 6 hours ago

DEADLINE

Rental Car Facility (RCF) Quick Turn Around (QTA) Area Fire Suppression System Replacement (Re-bid)The Port of Seattle’s Aviation Project Management Group is soliciting bids to replace the existing aqueous film-forming foam (AFFF) fire suppression system contaminated with per- and polyfluoroalkyl substances (PFAS) at the Rental Car Facility located in SeaTac. The project requires complete removal of the outdated foam system, including contaminated components, followed by the design and installation of a new full dry chemical fire suppression system. This includes new storage tanks, control valves, pumps, sprinkler piping, nozzles, and reserve tanks, all of which must be seamlessly integrated with the facility’s existing fire alarm system to ensure full compliance and operational continuity. The work is classified under NAICS code 238210 and is being handled as a quick turn-around initiative to address environmental and safety concerns associated with PFAS contamination. The contract is being re-bid following an initial solicitation, and all proposals must meet the Port of Seattle’s technical and regulatory standards for fire safety and environmental remediation. The primary point of contact for inquiries is Todd Rehm, with Project Manager Pat Nakamura available for technical coordination. The posting date indicates the opportunity is forecasted for future release, suggesting timelines for bid submission, evaluation, and project execution will likely unfold in the latter half of 2026. All work must be performed on-site at 3150 S 160th Street, SeaTac, with no flexibility in location, and contractors are expected to demonstrate experience in hazardous material abatement and commercial fire system installations.

Aviation Project Management Group

POSTED

about 6 hours ago

DEADLINE

Parking Garage UPSThe contract involves the demo and replacement of the existing uninterruptible power supply (UPS) system in a parking garage, ensuring continuous backup power for ticketing kiosks and associated access gates. The scope includes installing new UPS equipment, subpanels, electrical feeders, disconnects, and breakers to modernize the power infrastructure. The new UPS system will feature integrated data connections to enable remote alarm monitoring and system diagnostics, enhancing reliability and maintenance response times. All components will be upgraded to meet current operational standards and provide long-term resilience against power outages. The procurement is managed by the Aviation Project Management Group under the Port of Seattle, with the work to be performed at the parking garage facility. Primary point of contact is Yanet Maldonado, reachable via phone or email for inquiries, while JJ Jordan serves as the project manager. The contract was posted as a forecast on July 24, 2026, with a NAICS code of 238210 indicating it falls under electrical contracting services. No set-aside information is specified, and the solicitation number is not yet assigned. All technical and logistical details are aligned with the Port’s infrastructure modernization goals.

Aviation Project Management Group

POSTED

about 6 hours ago

DEADLINE

Electrical Unit Price Portwide 2026The Contract for Electrical Unit Price Portwide 2026 encompasses a broad range of electrical work to be performed across multiple Port of Seattle facilities including Seattle-Tacoma International Airport, Maritime Properties, and surrounding areas. Work includes the installation of raceways, wiring, medium voltage cabling, junction boxes, transformers, temporary power and lighting systems, and all associated grounding and testing tasks, all executed in strict compliance with applicable code-enforcing agency requirements. The Contractor is responsible for providing all labor, tools, equipment, materials, and incidental items needed to fulfill each task authorized by the Port through a formal Work Authorization, ensuring full compliance with the labor classifications specified in the Schedule of Unit Prices. This procurement is a forecast solicitation issued by the Port Construction Services division of the Port of Seattle, with a posted date of July 24, 2026, and classified under NAICS code 238210 for Electrical Contractors. Performance locations span various Port-owned and operated sites throughout the Seattle-Tacoma region. Primary point of contact for the solicitation is Heather Bowden, with Lesley Miles serving as Project Manager; inquiries should be directed to their provided contact details. There is no specified solicitation number or set-aside designation, and the contract will be administered under a unit price structure allowing for flexible task mobilization as directed by the Port.

Port Construction Services

POSTED

about 6 hours ago

DEADLINE

Electrical Work for Cooling System IntegrationThe contract requires the electrical installation of evaporative cooling systems, encompassing all aspects of wiring, circuit protection, control panel setup, proper labeling, and seamless integration with existing building management systems. All work must strictly adhere to the National Electrical Code and USDA standards to ensure safety, reliability, and regulatory compliance. The scope demands technical expertise in both electrical systems and agricultural facility infrastructure, with an emphasis on precise coordination with other building systems for optimal performance. This is a total small business set-aside subcontract under NAICS code 238210, issued by the USDAARS AFM APD, with performance required in Saint Paul, Minnesota, ZIP 55108. The solicitation was posted on July 24, 2026, and responses are due by August 13, 2026, at 10:00 PM Eastern Time. Only small businesses certified under the SBA program are eligible to bid, and the work must be completed by a contractor capable of meeting federal agricultural facility specifications. The contract is accessible through the SAM.gov portal for qualified applicants.

USDA Ars Afm Apd

POSTED

about 13 hours ago

DEADLINE

Electrical Integration and Power HookupThe contract pertains to the electrical integration and power hookup required for a new HVAC system, encompassing electrical wiring, circuit provisioning, disconnect installation, and seamless integration with the building’s existing power and control infrastructure. The work demands precise coordination to ensure compatibility, safety, and compliance with electrical standards while minimizing disruption to ongoing operations. All tasks must be executed in alignment with the technical specifications of the building’s current systems and the requirements of the new HVAC equipment. Subcontracted under the Department of Defense, the work is classified under NAICS code 238210 for electrical contracting and is posted by W4LD USA Hecsa with a response deadline of July 31, 2026. The scope requires qualified contractors with proven expertise in industrial or institutional building electrical systems, particularly those familiar with defense facility protocols. The place of performance and point of contact details are unspecified, suggesting the location and coordination may be determined post-award, and bidders must be prepared to address site-specific conditions upon selection.

POSTED

about 13 hours ago

DEADLINE

Ceiling and Lighting Fixture InstallationThe contract pertains to the installation of suspended ceiling grids, acoustic tiles, and integrated LED lighting fixtures within renovated office spaces at Scott Air Force Base, zip code 62225. This is a subcontract classified as a Total Small Business Set-Aside under the SBA program, meaning only small business concerns are eligible to compete. The NAICS code 238210 identifies the work as building completion services, specifically interior finishing and installation of ceiling and lighting systems. The solicitation was posted on July 24, 2026, with responses due by August 14, 2026, at 6:00 p.m. The contracting activity is under the Department of Defense, specifically the W7M6 Uspfo Activity Ilang 126, with performance required exclusively at the designated military installation. All work must comply with federal contract standards and be executed in alignment with the scope of ceiling and lighting integration within the specified renovated office areas.

W7M6 Uspfo Activity Ilang 126

POSTED

about 13 hours ago

DEADLINE

Repair Airfield Lighting System Volk Field CRTCThe Wisconsin National Guard is seeking qualified commercial contractors to perform the Repair Airfield Lighting System at Volk Field Air National Guard Base in Camp Douglas, Wisconsin, under a single firm fixed-price contract estimated between $10 million and $15 million. The work encompasses all labor, materials, equipment, tools, transportation, and supervision necessary to complete the airfield lighting repairs, with a contract duration of 510 calendar days beginning upon notice to proceed, including inspection and punch list completion. This acquisition is classified as commercial under the Revolutionary FAR Overhaul and will be conducted using streamlined procedures from RFO FAR Part 12 in conjunction with RFO FAR Part 15 for negotiated contracting. The North American Industry Classification System code is 238210, with a small business size standard of $19 million, and the procurement is unrestricted with applicable HUBZone price evaluation preference. A Small Business Subcontracting Plan is mandatory for large business offerors. The solicitation requires all bidders to be registered in SAM.gov, and the official documents, including technical specifications, design drawings, and hazardous materials assessments, are accessible solely through the Contract Opportunities page on SAM.gov. Specific brand-name components—Cummins Inc. power generation, Monaco controls, and Best Key locks—are sole-sourced due to compatibility requirements with existing systems. The pre-proposal conference and site visit took place on July 15, 2026, and the deadline for submissions is August 7, 2026, at 4 p.m. CDT. The Government intends to award the contract without discussions, evaluating proposals based on Management Capability, Past Performance, Small Business Participation, and Price. No formal public bid opening will occur; all inquiries must be submitted in writing to the designated point of contact. Amendments to the solicitation will be posted only on SAM.gov, and offerors are responsible for regularly checking the site for updates. Option line items include installing an AMP 3 Landing Zone, a Powered Vertical Lift Gate, and milling and overlaying an asphalt road.

W7N8 Uspfo Activity Wiang Crtc

POSTED

about 13 hours ago

DEADLINE

Building Automation System (BAS) Preventive Maintenance Service Contract – U.S. Embassy AstanaThe U.S. Embassy in Astana is soliciting quotations under RFQ 19KZ1026Q0004 for comprehensive preventive maintenance services for its Building Automation System (BAS), with the contract intended to be awarded on a lowest price technically acceptable basis. The work involves annual preventive maintenance visits, sensor calibration, backup and inventory retention, system documentation updates including as-built drawings and O&M manuals, and up to 20 hours of remote support per year, all to be performed by manufacturer-certified personnel using calibrated equipment. The contract is structured as a firm fixed price with a one-year base period and four one-year option periods, extending potential performance up to five years contingent on funding and government discretion. All work must comply with manufacturer-recommended procedures and adhere to stringent security protocols, including required Secret or TOP SECRET clearance for personnel accessing controlled areas, mandatory U.S. citizenship for access to restricted spaces, and full compliance with State Department and Diplomatic Security clearance procedures including Visit Authorization Requests and Country Clearance Requests. Proposals must be submitted in English by July 30, 2026, at 15:00 Astana time and must include evidence of active SAM registration, past performance, financial and personnel资质, and documentation of compliance with all technical and regulatory requirements. Key deliverables must be submitted electronically and include updated BAS documentation, calibration records, and inventory logs as specified in six referenced appendices. The government will inspect and accept deliverables at the embassy location in Astana under FOB Destination terms. Contractors must meet strict responsibility criteria under FAR 9.1, including financial stability, technical capability, and integrity, and must comply with all Federal Acquisition Regulation clauses including whistleblower protections, executive compensation reporting, and prohibitions on covered telecommunications equipment. All shipments must conform to packaging and marking standards that prohibit sensitivity labels, require double-wrapping of documentation, and mandate DOT-compliant handling for hazardous materials. Invoices must be submitted electronically to AstanaInvoices@state.gov under FAR 32.905(e), with payment administered by the embassy’s Financial Management Section in Astana. The contracting officer is Jeffrey Meyer, with Edward Berry serving as the Contracting Officer’s Representative, and no formal COTR is designated. Offerors must disclose UEI and CAGE codes, and affirmative responses regarding covered telecommunications equipment, foreign person status, or greenhouse gas reporting obligations trigger additional disclosure requirements. Price is the sole differentiator among technically acceptable and responsible offerors, with no evaluation

US Embassy Nur-Sultan

POSTED

about 13 hours ago

DEADLINE

North Carolina Department of Administration (NC DOA)The North Carolina Department of Administration is soliciting proposals for the upgrade of the fire alarm system under solicitation number SCO-25-30464-01A, with responses due by August 20, 2026. The project is managed by the State of NC - Construction Office and will take place across various locations within North Carolina, with the primary point of contact being Kadisha Molyneaux. This solicitation falls under the SLED category, indicating it is targeted toward state, local, or educational entities, and is positioned as a state-level construction initiative to enhance life safety systems within state-owned facilities. The contract aims to modernize outdated fire alarm infrastructure to meet current safety codes and operational standards across state buildings. While specific technical requirements and scope details are not listed in the provided metadata, the nature of the solicitation suggests it involves the installation, integration, and commissioning of a comprehensive fire alarm system upgrade, potentially including notification devices, control panels, wiring, monitoring systems, and interoperability with other emergency response systems. All work must comply with applicable state and federal fire safety regulations and is expected to be performed by qualified contractors capable of delivering reliable, code-compliant solutions. Proposals must be submitted by the stated deadline through the official state procurement portal linked in the solicitation details.

State of NC - Construction Office

POSTED

about 20 hours ago

DEADLINE

More opportunities from Department Of Veterans Affairs → 256-NETWORK Contract Office 16 (36C256)

Same awarding agency

Z2JZ--Wellness Center Flooring Install / ServiceThe Government is soliciting quotations under a Service-Disabled Veteran-Owned Small Business (SDVOSB) set-aside for flooring installation and related services at the Whole Health Wellness Center, identified by solicitation number 36C25626Q1005. Proposals must demonstrate technical acceptability by providing a detailed schedule based on a mock Notice to Proceed of October 1, 2026, a comprehensive technical approach covering demolition, subfloor preparation, moisture mitigation, flooring installation, protection of existing finishes, and cleanup, and a robust quality assurance and safety plan that includes inspections, adherence to manufacturer guidelines, OSHA compliance, and site housekeeping. Failure to meet any of these technical criteria will result in an automatic fail and disqualification from award. Additionally, each offeror must submit a minimum 3" x 3" sample of the actual flooring product or a manufacturer color chart along with written product specifications, and deliver them prior to the due date to the specified location with clear identification marking; failure to do so renders the quotation nonresponsive. Evaluation will also consider past performance using available sources such as CPARS, customer feedback, or the contracting officer’s knowledge, without obligation to request supplemental information. Price will be assessed for reasonableness and compared against other submissions to determine overall value. The Government reserves the right to select a higher-priced offer if it delivers superior value based on technical merit, product quality, and past performance. The deadline for submission is August 21, 2026, and the work is anticipated to be performed under the NAICS code 238330 by a certified SDVOSB vendor. All inquiries and submissions must be directed to the designated point of contact, Andrew T. Misfeldt, Contract Specialist at the Department of Veterans Affairs, with the solicitation issued through the 256-NETWORK Contract Office 16.

Flooring Contractors

POSTED

about 13 hours ago

DEADLINE

4110--Blast ChillerThe Department of Veterans Affairs is soliciting quotes under solicitation number 36C25626Q1086 for a 4110–Blast Chiller under a combined synopsis/solicitation formatted per FAR Part 12, utilizing simplified acquisition procedures. This action is exclusively set aside for service-disabled veteran-owned small businesses, with the NAICS code 333415 applicable to the manufacture of air-conditioning and heating equipment. The contract encompasses the full lifecycle of the equipment including supply, installation, de-installation, transportation, in-service support, and testing, with all items required to meet the salient characteristics and functional specifications detailed in the accompanying statement of work. All responses must be submitted electronically via email to Marcus.Sidney@va.gov no later than 8:00 a.m. Central Time on August 12th, 2026, with no phone submissions or paper quotes accepted. Questions and inquiries must also be submitted via email by 8:00 a.m. Central Time on August 7th, 2026, and only official communications received directly from the requester will be acknowledged. The point of contact for this procurement is Contract Specialist Marcus Sidney, and all correspondence must adhere to the electronic submission requirement outlined in the solicitation, with applicable provisions and clauses current as of FAC 2026-01.

Air-Conditioning and Warm Air Heating Equipment and Commercial and Industrial Refrigeration Equipment Manufacturing

POSTED

about 13 hours ago

DEADLINE

BNOE Clinical Driving SimulatorThe Department of Veterans Affairs through its 256-NETWORK Contract Office 16 is seeking a contractor to provide the BNOE Clinical Driving Simulator in full alignment with the salient characteristics outlined in the Statement of Work. The solicitation, identified by number 36C25626Q1096, is exclusively set aside for small businesses under the SBA Total Small Business Set-Aside provisions, targeting vendors classified under NAICS code 333310 for manufacturing other transportation equipment. Responses are due by August 4, 2026, and the contract will be performed primarily in Houston, Texas, with delivery and operational support expected at the designated location. The primary point of contact for inquiries is Oney Kelly, reachable via phone or email, and all submissions must adhere to the requirements specified in the combined solicitation document posted on SAM.gov on July 24, 2026.

Commercial and Service Industry Machinery Manufacturing

POSTED

about 13 hours ago

DEADLINE

Training & Technical Support ServicesThe contract seeks to establish on-site training and technical support services for clinical and technical staff focused on the operation, maintenance, and troubleshooting of a specialized system. The scope includes delivering comprehensive support documentation and standard operating procedures to ensure consistent and effective use of the system. Training must be conducted at the designated performance location in Biloxi, Mississippi, with all activities aligned to support staff readiness and system reliability. The contract is classified as a subcontract under NAICS code 541512, indicating it involves computer systems design and related services. It is issued by the Department of Veterans Affairs through the 256-NETWORK Contract Office 16, with a response deadline of August 19, 2026, and was posted on July 23, 2026. Contractors are expected to provide qualified personnel capable of delivering hands-on instruction and immediate technical assistance in a clinical environment.

Computer Systems Design Services

POSTED

DEADLINE

System Integration & Interoperability TestingThe contract requires the successful integration and interoperability testing of a new operating room system with two Government-furnished systems, VaultStream and EasySuiteIP, ensuring seamless end-to-end content handoff. The work must validate critical performance metrics including latency, contrast, and color rendering to guarantee that medical imagery and data are transmitted accurately and without degradation across all connected platforms. This effort is essential for maintaining clinical reliability and operational efficiency in the new OR environment. Performance of this subcontract is mandated to occur in Biloxi, Mississippi, with a response deadline of August 19, 2026, and the solicitation was posted on July 23, 2026. The contract falls under NAICS code 541330, indicating it is related to other scientific and technical consulting services, and is administered by the Department of Veterans Affairs through the 256-NETWORK Contract Office 16. The scope is strictly technical and focused on system-level validation rather than hardware procurement or software development, emphasizing testing, compliance, and real-world operational synchronization between existing and newly deployed medical systems.

Engineering Services

POSTED

DEADLINE

Endoscopic Camera & Instrument SupplyThe contract calls for the supply of 10 units of CH-S700-XZ-EA VEI11 4K Camera Heads and 4 OTV-S700 NTSC processors, all of which must meet brand-name or equal specifications and adhere to established reprocessing standards to ensure performance and safety. The equipment is intended for endoscopic applications and must be fully compliant with required technical and regulatory benchmarks. The solicitation is a subcontract under the Department of Veterans Affairs through the 256-NETWORK Contract Office 16, with performance required in Biloxi, Mississippi, 39531. The opportunity was posted on July 23, 2026, and responses are due by August 19, 2026, at 3:00 PM. The NAICS code 339112 indicates classification under Surgical and Medical Instrument Manufacturing, reflecting the specialized nature of the goods being procured. There is no set-aside designation, and no point of contact is listed in the provided information.

Surgical and Medical Instrument Manufacturing

POSTED

DEADLINE

6515--Getine 9100 Series Washer Disinfector

Surgical Appliance and Supplies Manufacturing

POSTED

DEADLINE

6515--Copy of 586-26-3-047-0105-Tourniquets - JAX

Surgical Appliance and Supplies Manufacturing

POSTED

DEADLINE

6515--PHILIPS 3rd GENERATION MATRIX TRANSTHORACIC TRANSDUCERS EQUIPMENT

Electromedical and Electrotherapeutic Apparatus Manufacturing

POSTED

DEADLINE

6515--36C25626Q1085-Brand Name or Equal (Olympus) Integrated Operating Room, Endoscopy Video System and Endoscopic InstrumentationThis solicitation, numbered 36C25626Q1085, is a combined synopsis and solicitation for commercial items under FAR Subpart 12, requesting quotes for an Integrated Operating Room, Endoscopy Video System, and Endoscopic Instrumentation, with a brand-name-or-equal requirement specifying Olympus equipment. The acquisition is unrestricted, classified under NAICS code 339112 with a size standard of 1,000 employees, and will be evaluated using a best-value trade-off process that considers Technical, Past Performance, Veterans Socioeconomic Preference, and Price as equal-weighted factors, with no lowest price technically acceptable methodology. The period of performance is from August 31, 2026, to December 30, 2026, with delivery and performance occurring at the VA Gulf Coast Veterans Health Care System in Biloxi, Mississippi, specifically at Warehouse Building 26. Offers must be submitted electronically by August 19, 2026, at 10:00 a.m. Central Time to Contracting Officer Anthony Marion, and all questions must be submitted by August 6, 2026. A site visit is strongly encouraged on August 4, 2026, at Building 30, 1st Floor, to assess ceiling structures, medical gas routing, conduit pathways, lighting, and network integration requirements, though attendance is not mandatory for submission. The solicitation incorporates the full suite of FAR and VAAR clauses through FAC 2025-06 and applicable deviations effective through 2026, including critical provisions such as 52.212-1, 52.212-2, 52.212-3, and 52.212-4, along with addendums and VA-specific clauses like VAAR 852.215-70 for veteran preference and VAAR 852.219-70 for small business subcontracting. Contractors must be registered in SAM.gov, comply with the Trade Agreements Act, and submit proposals in three volumes—Technical, Management, and Past Performance—each within strict page limits of 20, 20, and 5 pages respectively. Proposals must be in DOCX or PDF format, virus-free, and submitted only via email. Payment will be processed electronically through the VA’s

Surgical and Medical Instrument Manufacturing

POSTED

DEADLINE

6515--Bar Code Scanners for CAVHS Brand Name or Equal

Other Communications Equipment Manufacturing

POSTED

DEADLINE

6515--LITEGATE 500X

Sporting and Athletic Goods Manufacturing

POSTED

DEADLINE