This Solicitation opportunity from Government of Canada was posted on June 11, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

MOTOR-PUMP SUBASSEMBLY, HYDRAULIC

Closed

W8482-264700/AInternational

Submission Closed06/26/2026, 07:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 333996

New

DIBBS

CYLINDER-PUMP SETThe contract is for the procurement of one Cylinder-Pump Set, identified by NSN 4320-01-531-2219 and part number SCR-106H, under solicitation SPE7M1-26-T-232D. Delivery is required within 20 days of award to a FPO address in the Pacific, with FOB destination terms and zero tolerance for quantity variance. Inspection and acceptance occur at the delivery point. Packaging must comply with MIL-STD-2073-1E and MIL-STD-129, using specific preservation methods, unit containers, and palletization per DLA requirements, with no special marking or hazardous materials. The item must not contain ozone-depleting chemicals, and mercury or mercury compounds are strictly prohibited except for specific exempted functional uses in accordance with NAVSEA guidelines, including requirements for secondary containment in portable devices. All technical and quality standards referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, with revision control tied to the solicitation or award date. The contract mandates adherence to DLA packaging and transportation procedures, with detailed shipping instructions for vessel and parcel post routes, and includes government-specific identifiers and compliance codes for tracking and logistics. The required delivery date is July 22, 2026, with solicitation responses due by August 6, 2026, and procurement is managed by the Department of Defense under NAICS code 333996.

MARITIME SUPPLY CHAIN

POSTED

DEADLINE

SEAL ASSEMBLY, SHAFT, SPThe contract pertains to the procurement of a spring-loaded shaft seal assembly, designated by part number 1-1084-1 from REXNORD INDUSTRIES, LLC and 2490518 from PARKER HANNIFIN CORPORATION, with a National Stock Number of 4320-00-627-5679. A total of 222 units are required to be delivered within 606 days from the contract award, with delivery terms specified as FOB origin and inspection and acceptance occurring at the destination. The item is classified as a critical application and must comply with stringent technical, quality, and environmental standards, including the prohibition of asbestos, ozone-depleting chemicals, and intentional use of mercury or mercury-containing compounds, except under narrowly defined exceptions for functional uses in specific equipment. Sampling and inspection must adhere to MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise stipulated, and all attributes must be verified using specified verification levels or AQLs. Packaging must meet MIL-STD-2073-1E and marking must follow MIL-STD-129, with no special markings required. The item is subject to DLA’s master list of technical and quality requirements, and documentation requirements for source approval are in effect. The contracting activity is a total small business set-aside under NAICS code 333996, managed by the Department of Defense’s Maritime Supply Chain, with delivery directed to Hill Air Force Base, Utah, and transportation governed by DLA procedural notes. The original required delivery date is February 18, 2029, with a need ship date of April 4, 2028.

MARITIME SUPPLY CHAIN

POSTED

DEADLINE

EJECTOR, JETThe contract is for the procurement of a single bronze eductor, 4-inch, designated as EJECTOR, JET with NSN 4320011923053 and part number 974-4IN from VITAFLOW, LLC. The item must comply with technical and quality requirements listed in the DLA Master List of Technical and Quality Requirements, referenced by R and I numbers, with the applicable revision determined by the solicitation or award date depending on acquisition scale. Prohibitions are strictly enforced against the use of Class I ozone-depleting chemicals and the intentional addition of mercury or mercury-containing compounds, except for specific functional applications like batteries, fluorescent lights, instrument sensors, weapon systems, or approved chemical reagents; portable mercury-containing devices must include shock-proof construction and a secondary containment boundary in accordance with NAVSEA 5100-003D. Packaging must adhere to MIL-STD-2073-1E and DLA packaging requirements, with marking compliant to MIL-STD-129 and no special marking codes applied. Palletization must follow DLA guidelines and the unit of issue is each (EA). Delivery is required FOB destination within 20 days of contract award, with no variance allowed in quantity. Inspection and acceptance occur at the destination, and the item is to be shipped to the USS CHIEF MCM 14 at FPO AP 96662 via vessel shipment procedures. The original required delivery date is July 22, 2026, and the solicitation response deadline is August 6, 2026, under contract number SPE7M1-26-T-231V, issued by the Department of Defense through the Maritime Supply Chain.

MARITIME SUPPLY CHAIN

POSTED

DEADLINE

COVER, HYDRAULIC RESThe contract pertains to the procurement of one unit of a hydraulic reservoir cover, identified by NSN 4320-01-451-6424 and part number 6617042, supplied by JLG Industries, Inc. The delivery is required within five days of award, with shipment terms FOB origin and no tolerance for quantity variance. Inspection and acceptance both occur at the destination, with packaging strictly following MIL-STD-2073-1E standards, including specific preservation methods, packaging materials, and unit container code E6. Marking must comply with MIL-STD-129, with no special marking required, and palletization must adhere to DLA packaging requirements. The item is to be delivered to the military installation at Schokfield Barracks, Hawaii, under the specified government point of contact and shipping address, with the original required delivery date set for July 23, 2026. Technical and quality requirements are governed by the DLA Master List referenced in the document, applicable per the solicitation or award date depending on acquisition size. The contract number is SPE7M0-26-T-018K, with the solicitation issued by the Department of Defense’s Maritime Supply Chain eSoc Buys division, and the point of contact is Grace Beck.

MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

DEADLINE

PUMP, SLIDING SHOEThe contract is for the procurement of 33 units of a Pump, Sliding Shoe with NSN 4320-01-235-6167, under solicitation SPE7M1-26-T-232K, which is a total small business set-aside. Delivery is required within 280 days of the contract award, with FOB origin terms and inspection and acceptance points at the destination. The item must be uniquely identified with IUID per MIL-STD-130 and DFARS 252.211-7003, and packaged according to MIL-STD-2073-1E with marking compliant with MIL-STD-129; no special marking is required. Packaging must comply with DLA’s procurement standards, including unit packaging, intermediate containers, and palletization. Mercury or mercury-containing compounds are prohibited unless part of approved functional components such as batteries, fluorescent lamps, or specified instruments, and any such items must include shock-proof design and a secondary containment boundary as per NAVSEA 5100-003D. The delivery address is the DLA Distribution Center in New Cumberland, PA, and the required ship date is June 25, 2026, with an original delivery deadline of September 19, 2027. The unit of issue is each, priced at $33.00 per unit, totaling $1,089.00. Transportation and freight instructions must follow DLAD Proc Notes C19 and C20.

MARITIME SUPPLY CHAIN

POSTED

DEADLINE

EJECTOR, JETThe contract is for the procurement of seven EJECTOR,JET units with NSN 4320-01-554-3622 under solicitation SPE7M1-26-T-232P, issued as a Women-Owned Small Business Set-Aside by the Department of Defense’s Maritime Supply Chain. Delivery is required within 165 days of contract award with a firm delivery date of January 19, 2027, and must be shipped FOB origin in accordance with MIL-STD-2073-1E packaging standards, utilizing unit packaging code U with specified preservation methods and container types. All items must be marked per MIL-STD-129 with no special marking required. Inspection and acceptance occur at the destination facility located at DLA Dist San Joaquin in Tracy, California, with zero tolerance for quantity variance. The contract incorporates all technical and quality requirements referenced by R or I numbers from the DLA Master List, and packaging must comply with DLA Packaging Requirements for Procurement. Payment is based on a unit price of $7.00 per item totaling $49.00, with the DoD unit of issue being each (EA). The point of contact is Michael Reese, and all transportation details align with DLAD Proc Notes C19 and C20.

MARITIME SUPPLY CHAIN

POSTED

DEADLINE

IMPELLER, PUMP, CENTRThis contract is for the procurement of 42 centrifugal pump impellers with NSN 4320-01-521-6954 under solicitation SPE7M1-26-T-232M, a total small business set-aside. The item is designated as a critical application component and must comply with all technical and quality requirements listed in the DLA Master List of Technical and Quality Requirements, referenced by R and I numbers. The manufacturing process may involve casting or forging, and if special tooling is required, suppliers must submit a Casting and Forging Assistance Request through the designated DLA channels. Mercury or mercury-containing compounds are strictly prohibited in or on the item except for specific functional uses approved under NAVSEA 5100-003D, with portable devices containing mercury requiring shockproof construction and secondary containment. The impellers must be packaged in accordance with MIL-STD-2073-1E and marked per MIL-STD-129 with no special marking codes. Delivery is FOB origin with a strict 117-day lead time, to be completed by December 2, 2026, with no tolerance for quantity variance. Inspection and acceptance occur at the destination facility located at the DLA Distribution center in New Cumberland, Pennsylvania. All packaging must adhere to DLA packaging requirements and palletization standards, and transportation is governed by DLAD procedural notes C19 and C20. The supplier must coordinate with government-point-of-contact Michael Reese for any inquiries, and unit of issue is each, priced at $42.00 per unit for a total contract value of $1,764.00.

MARITIME SUPPLY CHAIN

POSTED

DEADLINE

43--EJECTOR,JETThe solicitation seeks seven jet ejectors, identified by NSN 4320015543622, to be delivered to DLA Dist San Joaquin within 165 days of award. Only approved sources, identified by the identifiers 47WD8 5700230 and 47WD8 5999142, are eligible to respond. The procurement is conducted as a Request for Quotation with no hard copies available; all submissions must be submitted electronically through the designated online portal. The solicitation does not include specifications, plans, or drawings, and all responsible sources may submit quotes if received by the deadline. The effort is designated as a Women-Owned Small Business set aside under NAICS code 333996, administered by the DLA Land and Maritime office in Columbus, Ohio. The response deadline is August 6, 2026, and inquiries should be directed via email to the point of contact listed in the solicitation document accessible through the provided SAM.gov link.

DLA Land And Maritime

POSTED

DEADLINE

43--PUMP,SLIDING SHOEThe contract seeks the procurement of 33 units of NSN 4320012356167, a sliding shoe pump, to be delivered to W1A8 DLA DISTRIBUTION within 280 days after award. The approved source for this item is designated as 52330 CW7055/H-200C.I., and only quotes submitted electronically will be accepted. The solicitation is issued as an RFQ under number SPE7M126T232K, with no hard copies available, and no specifications, plans, or drawings are provided. All responsible sources may respond, provided submissions are received by the deadline of August 6, 2026. This procurement is a total small business set-aside under NAICS code 333996, reserved exclusively for small businesses as defined by the SBA. The contracting activity is managed by the Department of Defense through DLA Land and Maritime, based in Columbus, Ohio, with inquiries directed to the designated point of contact via email. The solicitation will be accessible solely through the online SAM.gov portal linked in the notice.

DLA Land And Maritime

POSTED

DEADLINE

43--IMPELLER,PUMP,CENTRThe solicitation is for 42 impellers for centrifugal pumps, specified by NSN 4320015216954, under a total small business set-aside as defined by FAR 19.5, with the NAICS code 333996. Offers must be submitted electronically through the SAM.gov portal by the deadline of August 6, 2026, and only approved sources listed as 96046 082678M and 96046 082682M REV E ITEM 19 are eligible to respond. The delivery destination is W1A8 DLA DISTRIBUTION, with an anticipated delivery timeline of 117 days after contract award. This is a combined solicitation issued by the Department of Defense through DLA Land and Maritime, with the office located in Columbus, Ohio. No hard copies or detailed specifications, plans, or drawings are available; all information must be obtained via the electronic solicitation link. All responsible small businesses may submit quotes, but submissions must be received electronically before the deadline to be considered. Questions regarding the solicitation should be directed via email to the designated point of contact listed in the solicitation document.

DLA Land And Maritime

POSTED

DEADLINE

43--SEAL ASSEMBLY,SHAFT,SPThe solicitation seeks 222 units of NSN 4320006275679 SEAL ASSEMBLY, SHAFT, SP under a full and open total small business set-aside, with responses due by August 6, 2026. The procurement is issued by the Defense Logistics Agency Land and Maritime through solicitation number SPE7M126T232L, with delivery required to the DLA Distribution Depot Hill within 606 calendar days after award. Only approved suppliers with the commercial item identifiers 91587 1-1084-1 and 92003 2490518 are eligible to respond, and all submissions must be made electronically through the SAM.gov portal; no hard copies of the solicitation are available, and no specifications, plans, or drawings are provided. The acquisition falls under NAICS code 333996 and is restricted to small businesses as defined by the SBA, with the contracting office located in Columbus, Ohio, and primary inquiries directed to the listed email address for the buyer identified in the official solicitation document.

DLA Land And Maritime

POSTED

DEADLINE

Rotary Pump Supply and DeliverySt. Thomas Health Services in Jamaica is seeking a supplier to provide and deliver a rotary pump under a subcontract arrangement, with no installation, training, or ongoing maintenance services required. The procurement is categorized under NAICS code 333996 and is issued by the Government of Jamaica, indicating a public sector initiative to support healthcare infrastructure. The solicitation was posted on July 24, 2026, with a firm response deadline of August 4, 2026, at 5:00 PM local time, requiring all bids to be submitted prior to this cutoff. While specific technical specifications or quantity details are not included here, the contract strictly confines obligations to the physical supply and delivery of the equipment to the designated facility in Jamaica, placing full responsibility on the vendor to ensure compliance with applicable standards and timely transit without additional service components. The procurement is accessible through the Jamaican e-procurement portal via the provided link.

St. Thomas Health Services

POSTED

3 days ago

DEADLINE

in 8 days

AI Contract Overview

The Department of National Defence is seeking bids for two Hydraulic Motor-Pump Subassemblies, part number 170158-20-025, manufactured by BLUMETRIC ENVIRONMENTAL INC, with a NSN of 4320-20-0138293 and NCAGE L0AV8. Each unit is a first-pass pump assembly comprising 17 components, primarily an electric motor and axial piston pump, and must be new production of current manufacture, conforming to the latest drawing and specification in effect at the bid closing date. Two units are required for delivery to CFB Halifax, Nova Scotia, and two to CFB Esquimalt, British Columbia, under a Delivered Duty Paid (DDP) term as defined in Incoterms 2020, meaning the contractor bears all costs, risks, and responsibilities including transport, customs duties, and taxes until the items are received at the designated Canadian Forces supply depots. Bidders may propose equivalent or substitute products if accompanied by complete technical specifications, descriptive literature, and assurances that existing Canadian equipment warranties remain unaffected. All bids must comply with mandatory technical requirements, including the correct part number and NCAGE, and must be submitted in a structured format with separate technical, financial, and attestation sections. Packaging and marking must adhere to Canadian Forces specifications D-LM-008-001/SF-001 for preservation and D-LM-008-002/SF-001 for marking, with bar codes using UCC/EAN-128 symbology and Application Identifiers 241 for PSCN or 7001 for NSN. Human-readable interpretations must accompany all bar codes, and markings must remain legible for the item’s expected service life, in line with DND standard D-02-002-001/SG-001. Quality assurance is governed by ISO 9001:2015, with inspection and release documentation obligations depending on the bidder’s location. Payment is on a firm-price basis with customs duties included and applicable taxes extra, paid via direct deposit or international wire transfer, with invoices submitted only after delivery and sent to designated financial offices in Halifax and Victoria. The bid deadline is June 26, 2026, and the contract will be awarded to the lowest compliant bidder on an item-by-item basis. Canada reserves

General Info

Procurement of four hydraulic motor-pump subassemblies for two Canadian military bases by June 2026.

Agency

Government of Canada → Department of National DefenceView Agency

NAICS

333996 - Fluid Power Pump and Motor ManufacturingView NAICS

Place of Performance

British Columbia, Nova Scotia, CAN

Set-Aside

NONE

Documents

(2)

RFP W8482-264700-A EN - Motor-Pump Subassembly Hydraulic

PDF•rfp

RFP W8482-264700-A FR - Sous-ensemble moteur-pompe, hydraulique

PDF•rfp

AI Contract Breakdown

Uniform Contract Format

Timeline

PhaseClosed

PostedJun 11

Solicitation

Response DeadlineJun 26

Deadline has passed

Submission Closed

06/26/2026, 07:00:00 PM UTC

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyGovernment of Canada → Department of National Defence

Contacts1 person available

OfficeN/A

Organization / Agency

Government of Canada → Department of National Defence

View Agency Profile

Office AddressN/A

Contacts

Jean-Pierre NormandinContracting Authority

contact@example.gov

Full Description

NOTICE OF PROPOSED PROCUREMENT The Department of National Defence has a requirement for the items detailed below. The delivery is requested at CFB Halifax, Nova Scotia and CFB Esquimalt, British Columbia. Line Item 1, MOTOR-PUMP SUBASSEMBLY,HYDRAULIC Part Number: 170158-20-025 GSIN: 4320 NCAGE: L0AV8 Manufacturer: BLUMETRIC ENVIRONMENTAL INC Quantity: 2, Unit of Issue: EA, to be delivered to CFB Halifax, Nova Scotia. Line Item 2, MOTOR-PUMP SUBASSEMBLY,HYDRAULIC Part Number: 170158-20-025 GSIN: 4320 NCAGE: L0AV8 Manufacturer: BLUMETRIC ENVIRONMENTAL INC Quantity: 2, Unit of Issue: EA, to be delivered to CFB Esquimalt, British Columbia. Bidders proposing an Equivalent or Substitute Product must indicate the brand name and model and/or Part Number and the NSCN/NCAGE of the item of supply they are offering. Bids will be assessed on a Delivery Duty Paid (DDP) basis The Crown retains the rights to negotiate with suppliers on any procurement. Documents may be submitted in either official language of Canada.