Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

This Solicitation opportunity from Department Of Defense was posted on February 5, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

N4523A26Q5706 ELPAR Cylinder Lift Rebuild

Awarded
N4523A26Q5706Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 811310
New
Kubota M8200 Clutch Replacement
Solicitation # kubota-m8200-clutch-replacement
Management and Training Corporation is soliciting lump sum fee proposals for the clutch replacement of a Kubota M8200 tractor with front wheel assist, located at the Earle C. Clements Job Corps Center in Morganfield, Kentucky. The scope of work requires a qualified contractor to provide all transportation, labor, materials, and equipment to diagnose and repair the clutch assembly and power take-off system. Key technical requirements include replacing friction discs, bearings, oil seals, and O-rings, resurfacing the flywheel, and replacing hydraulic pipes and filters as needed. The contractor must perform all work according to manufacturer specifications and provide a final summary of diagnostic findings, an itemized list of replaced parts, and warranty documentation upon completion. This solicitation is set aside for small businesses, including VOSB, SDVOSB, WOSB, and HUBZone certified entities. Bids must be submitted via email to Angie Mahoney by 3:00 PM CST on November 3, 2026, and must include a bid sheet, proof of insurance, a completed supplier packet with a W-9, and applicable SBA certification letters. Award decisions will be based on best value, with a focus on administrative compliance and technical qualifications. The contract is subject to various Federal Acquisition Regulations, including standards for combating trafficking in persons, Buy American restrictions, and Service Contract Labor Standards per Wage Determination 2015-4687 Revision 31 for Kentucky.
Earle C. Clements Job Corps Center

POSTED

about 2 hours ago

DEADLINE

in 5 days
NAICS: 811310
New
SLED
SMDOT Elevator Maintenance
Solicitation # 12701633
The City of Santa Monica Department of Transportation (SMDOT) is soliciting bids for turnkey maintenance, inspection, and repair services for three hydraulic elevators located at 1620 6th Street. The equipment includes two passenger elevators and one freight elevator, specifically models AAK137, AA2986, and AEP227. The scope of work requires monthly systematic examination, lubrication, and repair of critical components, as well as monthly emergency recall and override testing in accordance with California Administrative Code Title 8, Section 3000(h). All provided materials must be new and meet Original Equipment Manufacturer standards. Bids must be submitted electronically via the OpenGov portal by December 3, 2026, at 3:00 pm. Qualified bidders must possess a valid C-11 California contractor's license and provide a maintenance supervisor to ensure compliance with safety requirements. The contract award is based on a weighted evaluation of experience and technical competence (25%), ability to meet work plans and timelines (25%), cost (20%), stability and references (10%), value add (10%), and quality control (10%). The City is not required to select the lowest monetary bidder. Key contractual requirements include a payment bond for awards exceeding 25,000 dollars, a Living Wage Certification for awards over 54,200 dollars, and compliance with the Oaks Initiative and ADA Title II. Successful bidders must provide a Certificate of Insurance naming the City of Santa Monica as an additional insured. Payment terms are net thirty days. The agreement includes an initial term with four subsequent annual renewal options.
D600 DEPT OF TRANSPORTATION - SaMoDOT

POSTED

about 16 hours ago

DEADLINE

in about 1 month
NAICS: 811310
New
SLED
CNG Fueling Station Maintenance and Repair Services
Solicitation # 2026-RFP-0441
The County of Sacramento is soliciting proposals under solicitation 2026-RFP-0441 to establish a contract for Compressed Natural Gas (CNG) fueling station preventative maintenance and repair services. The contract covers two facilities located at the Fleet Services Division and the Department of Airports. The selected contractor must provide certified CNG technicians to perform twice-monthly preventative maintenance and major services at 4,000 and 8,000-hour benchmarks. Service requirements include 24/7 availability, with on-site response times mandated within 48 hours for standard service calls and 24 hours for emergency calls. All work must adhere to manufacturer specifications and Cal/OSHA safety standards, including the provision of GHS Safety Data Sheets. The contract is designed for an initial one-year term with the option for four additional one-year extensions upon mutual agreement, with a scheduled award date of December 14, 2026. Award decisions will be based on factors other than price alone, utilizing a points-based scoring system that evaluates cost and the proposer's technical approach. Bidders must provide a Public Works and Prevailing Wage Contractor Registration number and are encouraged to utilize the County's Procurement Opportunities Program for small and micro-business preferences. Proposals must be submitted electronically via the SacCountyE bids portal by the final extended deadline of November 13, 2026.
DGS: CAPSD - Procurement

POSTED

about 16 hours ago

DEADLINE

in 15 days
NAICS: 811310
New
SLED
ELEVATOR & ESCALATOR MAINTENANCE, INSPECTIONS, AND TESTING
Solicitation # BPM059230
The Maryland Department of Transportation Maryland Transit Administration (MDOT MTA) is soliciting bids for a firm-fixed-price contract, AGY-26-001-MT, to provide comprehensive maintenance, inspection, and testing for elevators, escalators, and wheelchair lifts across various Metro stations in Maryland. The scope of work includes systematic preventive maintenance, emergency repairs, and deep cleaning to ensure all equipment remains in first-class operating condition in accordance with ASME A17.1 and A17.2 standards. The contract features a five-year base period with a total basis of award calculated at 4,750,000 dollars, which includes a 950,000 dollar allowance for reimbursable parts and materials. Bidders must maintain an operational office within 20 miles of Baltimore and provide certified mechanics with at least three years of documented experience. Award will be granted to the responsible bidder offering the lowest total price. Key procurement goals include a 17 percent Minority Business Enterprise (MBE) and a 1 percent Veteran-owned Small Business Enterprise (VSBE) participation rate. Bidders must possess at least three years of firm experience with comparable equipment and provide proof of significant insurance coverage, including 1 million dollars in general liability and 5 million dollars in pollution liability. Bids are due by November 12, 2026, and must include a bid bond, a contract affidavit, and detailed pricing for preventive maintenance and hourly labor rates. Performance is measured by the completion of specific checklist tasks rather than labor hours, and the contractor is required to submit safety reports within 24 hours of any incident.
Maryland Transit Administration

POSTED

about 18 hours ago

DEADLINE

in 14 days
NAICS: 811310
New
SLED
WOOHDR30R - Overhead Door Repairs and Maintenance - MDOT/SHA Worcester County
Solicitation # WOOHDR30R
Solicitation WOOHDR30R is an Invitation for Bids issued by the Maryland State Highway Administration for the preventative maintenance and repair of 27 overhead doors and their related operators at the Worcester County Shop locations in Snow Hill and Berlin. The scope of work requires semi-annual 20-point inspections and on-call repair services with a mandatory response time of four business days. All repairs must be performed by technicians with at least two years of experience, adhere to manufacturer specifications and building codes, and utilize new, first-quality parts. The contractor is required to provide a not-to-exceed cost quotation before performing any repair work and must submit detailed written reports following each service visit. The contract will be awarded to the responsive and responsible vendor offering the lowest total bid price. To qualify, bidders must demonstrate at least two years of continuous professional experience in overhead door services, be registered with the State Department of Assessments and Taxation, and possess their own employees, equipment, and vehicles without the use of subcontractors. Required submission documents include the eMMA Price Form, a Bid/Proposal Affidavit, and reference checks from the last five years. Payment is processed through the Snow Hill Shop, with specific billing requirements for trip charges, manlift usage, and materials priced at or below retail cost or MSRP. All work must comply with MOSH and OSHA safety regulations.
State Highway Administration

POSTED

about 19 hours ago

DEADLINE

in 20 days

AI Contract Overview

Show more

The contract titled "N4523A26Q5706 ELPAR Cylinder Lift Rebuild" is a solicitation issued by the Puget Sound Naval Shipyard IMF, part of the Department of Defense. The solicitation was posted on February 2, 2026, with a response deadline of February 9, 2026, at 6:00 PM. This opportunity is designated as a Total Small Business Set-Aside under FAR 19.5, specifically requiring inclusion of the NAICS code 811310, which must be reflected in the contractor’s SAM profile. The work is to be performed in Bremerton, Washington, reflecting the office address and place of performance location. Prospective bidders are advised to carefully review and return all requested paperwork as part of their submission. The contract involves the rebuild of an ELPAR cylinder lift, indicating a technical, maintenance-related scope. Key points of contact include Isaiah Fontenot and Edwin Baldoria, who are available to provide additional information via their provided email addresses. The government emphasizes compliance with submission requirements and the importance of aligning the NAICS code with the solicitation to ensure eligibility.

General Info

DoD solicitation for ELPAR cylinder lift rebuild, small business set-aside, Bremerton WA work.

NAICS

811310 - Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance

Place of Performance

Bremerton, WA, USA

Set-Aside

SBA

Documents

8

Attachment 7 - Technical Drawing (C8N4523A26Q5706)

PDF, High priority: read this firstspecifications
High

Contract Data Requirements List for N4523A26PR00098

PDF, High priority: read this firstcdrl
High

FAR 52.204-24 Representation Regarding Certain Telecommunications and Video Surveillance Services or Equipment

PDF, High priority: read this first4 pages · representation
High

FAR 52.212-5 Contract Terms and Conditions for Commercial Products and Services

PDF, High priority: read this first11 pages · contract-document
High

PWS Refurbishment of Elwell Parker Main Lift Cylinders

PDF, High priority: read this first6 pages · pws
High

QASP for Refurbishment of Elwell Parker Main Lift Cylinders

PDF, High priority: read this first6 pages · qasp
High

Solicitation N4523A26Q5706 for Elpar Cylinder Rebuild

PDF, High priority: read this first50 pages · rfq
High

Solicitation N4523A26Q5706 GFP Attachment 1

PDF, High priority: read this first1 page · gfp
High

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

1 update
PhaseAwarded
Posted

Solicitation

Notice updated

The notice description changed.

Awarded

Contract was awarded

Submission Closed

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → Puget Sound Naval Shipyard IMF
Contacts2 people available
OfficeBREMERTON, WA, 98314-5001, USA
Office AddressBREMERTON, WA, 98314-5001, USA
Contacts
Isaiah Fontenot
Edwin Baldoria

Full Description

Show more

PLEASE READ ALL PAPERWORK CAREFULLY. RETURN ALL PAPERWORK REQUESTED. MAKE SURE THE NAICS CODE SPECIFIED IN THE SOLICITATION IS IN YOUR SAM PROFILE.


Amendment 1 2/5/2026:


In response to vendor questions regarding the size and make of the cylinder lift units, Attachment 7. Technical Drawing has been added to the list of attachments on this solicitation. 

More opportunities from Department Of Defense → Puget Sound Naval Shipyard IMF

Same awarding agency

NAICS: 336611
New
Federal
Maintenance, Repair, and Preservation of YT-812
Solicitation # N4523A27Q1003
The Puget Sound Naval Shipyard and Intermediate Maintenance Facility is conducting market research to identify capable industry sources for the maintenance, repair, and preservation of the YT-812, a 90-foot steel-hulled medium yard tug. The anticipated period of performance is from July 2027 through September 2027. To ensure proper government oversight, the work must be performed at a contractor facility located within the Puget Sound, Washington region, specifically between Olympia and Bellingham. The comprehensive scope of work includes docking and undocking the vessel, performing ultrasonic and visual inspections of the hull and decks, and executing extensive blasting and preservation of the underwater hull, freeboard, and non-skid surfaces. Technical requirements involve repairing hull and winch valves, modifying winch control and air piping, installing an automatic voltage regulator, and performing interval inspections and repairs on Schottel Z-drive units and twin disc transmission coolers. The contractor must adhere to strict quality standards, including ANSI/AWS D1.1/D1.2 welding standards and MIL-PRF specifications for coatings. Interested respondents must submit a notice of interest by November 3, 2026, detailing their business size under NAICS code 336611, past performance, and technical capabilities. The government is specifically looking for firms with a satisfactory performance record and a current Agreement for Boat Repair or Master Ship Repair Agreement issued by NAVSEA. This sources sought notice is for planning purposes only and does not constitute a formal request for quotations.
Ship Building and Repairing

POSTED

2 days ago

DEADLINE

in 5 days
View Details
NAICS: 333912
New
Federal
Portable Special-Purpose High-Purity Nitrogen Generation Systems
Solicitation # N4523A27RFI0801
The Puget Sound Naval Shipyard and Intermediate Maintenance Facility is conducting market research via Request for Information N4523A27RFI0801 to acquire portable, special-purpose high-purity nitrogen generation systems. The government is seeking a ruggedized, turn-key solution housed within a single ISO 668 Type 1C 20-foot heavy-duty intermodal shipping container that is weather-sealed and salt-air corrosion resistant. Technical requirements specify the system must produce nitrogen with oxygen purity levels below 50 ppm, deliver pressures up to 4,500 psig, and feature a dual-mode feed air architecture, a high-pack booster compressor, and an automated supply manifold. The system must be capable of 180 days of continuous operation without scheduled servicing and 7-day autonomous operation in an unmanned outdoor shipyard environment. The contemplated acquisition strategy is an Indefinite Delivery/Indefinite Quantity (IDIQ) contract utilizing streamlined commercial procedures under FAR Part 12 and FAR Part 15. The government intends to procure two initial First Article Test units for qualification and NRTL inspection, followed by up to ten production units ordered via firm-fixed-price delivery orders. The scope includes on-site turnkey delivery, commissioning, operational verification at the Bremerton, Washington facility, 24 months of spare consumable parts, and optional multi-year maintenance agreements. Source selection is expected to be based on Best Value with Tradeoffs or Lowest Price Technically Acceptable, evaluating technical capability, reliability, delivery schedules, and past performance.
Air and Gas Compressor Manufacturing

POSTED

2 days ago

DEADLINE

in 1 day
View Details

Earlier notices in this NAICS code

Posted before this notice, open and closed

Find Active Opportunities Like This

Get AI-powered intelligence on the opportunities still open

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS