This Government Contract opportunity from Government of Canada was posted on June 1, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

On-Site Installation & Training Services

Closed

International

Submission Closed06/16/2026, 07:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 811212

New

Federal

Electronics and Instrumentation MaintenanceThe contract involves the repair and calibration of electronic systems and instrumentation critical to facility operations at Wright Patterson Air Force Base under a subcontract arrangement. It falls under NAICS code 811212, which pertains to electronic equipment repair and maintenance, and is managed by the Department of Defense through the FA8601 Aflcmc Pzio office. The work requires precise technical expertise to ensure the reliability and accuracy of operational electronics, with all performance obligations tied to the designated military installation. The solicitation was posted on July 17, 2026, and responses are due by July 31, 2026, at 3:00 PM, creating a narrow window for qualified vendors to submit proposals. No set-aside preferences or specific organizational type requirements are indicated, leaving the opportunity open to eligible subcontractors who can meet the technical demands of maintaining defense-critical instrumentation.

POSTED

DEADLINE

Preventive Maintenance PlanningTexas Southern University is seeking a subcontractor to develop comprehensive preventive maintenance procedures aimed at ensuring the long-term reliability of its Building Automation System. The scope of work includes creating detailed inspection, cleaning, and calibration schedules along with clear task descriptions tailored to maintain system performance over time. The contract was posted on July 16, 2026, with a response deadline of August 13, 2026, at 5:00 PM CT. The solicitation falls under NAICS code 811212, which corresponds to electronic and precision equipment repair and maintenance. The place of performance and agency office location are not specified, but the contract is administered through the Texas SmartBuy portal, and all proposals must be submitted via the provided link before the deadline.

Texas Southern University

POSTED

DEADLINE

Emergency SCADA Repair and On-Call SupportThe contract seeks a subcontractor to provide continuous 24/7 emergency response services for SCADA system failures, requiring immediate diagnostic and repair capabilities at all times, including nights, weekends, and holidays. The response must ensure minimal downtime and operational continuity for critical infrastructure under the jurisdiction of the California Department of Corrections & Rehabilitation. The contractor is expected to maintain readiness to deploy promptly, resolve complex technical issues, and support system stability without delay. This is a subcontract under NAICS code 811212, with a response deadline of July 31, 2026, and a posting date of July 16, 2026. The place of performance is not specified beyond the state of California, and no set-aside provisions are indicated. The solicitation is open through the CalEprocure platform, and interested parties must submit their proposals by the stated deadline to be considered for award.

California Department of Corrections & Rehabilitation

POSTED

DEADLINE

Non-Emergency SCADA System Repair ServicesThe contract titled Non-Emergency SCADA System Repair Services is issued by the California Department of Corrections & Rehabilitation to secure subcontractor services for routine maintenance and repair of SCADA systems during standard business hours. The work involves scheduled diagnostic assessments, troubleshooting, and both hardware and software repairs necessary to maintain operational integrity without responding to urgent or emergency failures. Services are expected to be performed in alignment with the agency’s operational needs, focusing on preventive and planned interventions rather than reactive measures. The solicitation was posted on July 16, 2026, with a response deadline of July 31, 2026, and is classified under NAICS code 811212, which corresponds to computer and office machine repair and maintenance. The contract is structured as a subcontract and is open for bids through the California eProcurement portal. The place of performance and specific locations are not specified in the data provided, but services are anticipated to support facilities under the jurisdiction of the California Department of Corrections & Rehabilitation across the state. No set-aside provisions are indicated, and no point of contact details are listed in the available information.

California Department of Corrections & Rehabilitation

POSTED

DEADLINE

Manufacturer Repair Services for Critical ComponentsThe contract involves the repair and refurbishment of critical components for Teledyne API air quality monitoring and calibration equipment that supports the Florida Department of Environmental Protection’s monitoring network. These services are essential to maintaining the accuracy and reliability of air quality data collected across the state, ensuring compliance with environmental regulations and public health standards. The work requires specialized technical expertise to restore equipment to manufacturer specifications, with all components undergoing rigorous testing to guarantee performance integrity after refurbishment. Subcontractors must be capable of handling sensitive environmental monitoring hardware with precision, adhering to strict quality assurance protocols during each phase of the repair process. The solicitation is open for responses until August 6, 2026, and is classified under NAICS code 811212, which corresponds to electronic and precision equipment repair and maintenance. The contract is intended for a subcontractor to support the agency’s ongoing operational needs, with work performance expected to occur in coordination with FDEP’s logistics and technical teams to minimize disruption to monitoring operations. All proposals must demonstrate proven experience with Teledyne API systems and the ability to deliver timely, defect-free refurbishments.

Department of Environmental Protection

POSTED

DEADLINE

Extended Warranty and Lifecycle Support ServicesThe contract is for the provision of extended warranty and lifecycle support services for Taser handles, batteries, docks, and VR equipment, aimed at ensuring continued operational reliability and performance throughout the usable life of the devices. This subcontract is issued under the NAICS code 811212, indicating a focus on electronic and appliance repair and maintenance services, and is managed by the Texas Department of Insurance. The services will encompass proactive maintenance, repair, replacement, and technical support for the specified hardware to minimize downtime and maintain compliance with operational standards. Responses to this solicitation are due by July 31, 2026, with the posting date listed as July 16, 2026. The place of performance and organizational details are not specified, though the contract originates from the state of Texas and is accessible via the Texas SmartBuy portal. While no set-aside designation or point of contact information is provided, vendors must be prepared to meet the technical and operational requirements for supporting law enforcement-grade equipment with stringent reliability and uptime expectations. The contract does not specify geographic restrictions, implying services may be delivered remotely or on-site as needed to support the agency’s equipment across its jurisdiction.

Texas Department of Insurance

POSTED

DEADLINE

Drone Maintenance and Repair ServicesThe contract seeks a subcontractor to provide ongoing maintenance, troubleshooting, and repair services for drone systems and associated electronic components under the auspices of the Forestry Department of the Government of Jamaica. The work is critical to ensuring the operational readiness of unmanned aerial systems used for forestry monitoring, land management, and environmental surveillance. The subcontractor must possess the technical expertise to diagnose and resolve hardware and software issues across various drone platforms and embedded electronics, with an emphasis on rapid response and consistent system reliability. All services are expected to be performed in alignment with the operational needs of the agency without specifying a defined geographic location for performance. The opportunity is posted under NAICS code 811212, which categorizes it as electronic and precision equipment repair and maintenance, indicating a focus on technical service rather than manufacturing or supply. The solicitation was published on July 16, 2026, with responses due by July 27, 2026, suggesting a relatively short procurement cycle. While no set-aside type is specified, the contract is explicitly structured as a subcontract, meaning the winning entity will likely be engaged by a primary contractor rather than contracting directly with the government. Interested parties must review the full details through the provided government portal to understand any additional requirements, qualifications, or technical specifications not outlined in the public posting.

POSTED

DEADLINE

EDAX X-Ray System Maintenance SupportThe contract encompasses comprehensive maintenance, calibration, and repair services for EDAX X-Ray systems, specifically supporting the Elect Plus, Octane Pro, and Apollo models. This subcontract is focused on ensuring the continued operational integrity, accuracy, and performance of these critical analytical instruments through scheduled and reactive service efforts, with all work to be performed in alignment with manufacturer specifications and industry best practices for X-ray detection systems. The scope requires technical expertise in hardware diagnostics, software troubleshooting, sensor recalibration, and component replacement to maintain system reliability for users in regulated environments. Issued by the Texas Commission on Environmental Quality under NAICS code 811212, the contract was posted on July 16, 2026, with responses due by July 30, 2026. Although specific performance location details are not provided, services are expected to support equipment deployed across Texas state operations. The contract does not specify a set-aside status or point of contact, and all submissions must be directed through the designated Texas SmartBuy portal linked in the documentation. Contractors must demonstrate proven experience with EDAX systems and possess the capability to respond promptly to service requests to minimize downtime for essential environmental monitoring and analytical functions.

Texas Commission on Environmental Quality

POSTED

DEADLINE

On-Site Installation and Maintenance ServicesThe contract pertains to the installation, preventive maintenance, and repair of print devices across multiple school locations within Mississippi, with a strict four-hour on-site response service level agreement to ensure minimal disruption to educational operations. Services must be delivered promptly and reliably, covering all aspects of printer lifecycle management from initial setup to ongoing technical support, with an emphasis on maintaining high operational availability of printing equipment throughout the school districts. The contract is classified as a subcontract under NAICS code 811212, which corresponds to commercial and industrial machinery and equipment repair and maintenance. It was posted on July 16, 2026, with bids due by July 30, 2026, and is administered by the Mississippi Department of Finance and Administration under the MPTAP designation. The place of performance spans various school sites across the state, though specific locations are not outlined in the posting. Interested parties must submit proposals prior to the deadline to be considered for award, with all work required to comply with the stipulated response timeline and service standards.

POSTED

DEADLINE

Supply Chain Traceability and Obsolete Parts DocumentationThe contract requires the maintenance and documentation of supply chain traceability for all components to ensure full visibility and accountability throughout the procurement and manufacturing process, with strict adherence to the C02 and C03 compliance clauses. This includes tracking the origin, movement, and status of materials from supplier to final assembly, ensuring that all data is accurately recorded and readily accessible for audits or inspections. Additionally, the contractor must actively manage obsolete or discontinued parts, identifying them promptly, documenting their replacement or withdrawal, and ensuring they do not enter production or remain in inventory without proper authorization and justification. The work is performed under a subcontract issued by the Defense Logistics Agency on behalf of the Department of Defense, with the NAICS code 811212 indicating services related to commercial and industrial machinery and equipment repair and maintenance. The contract was posted on July 16, 2026, and the performance location and point of contact details are not specified, but the work is tied to DLA’s broader mission of sustaining military supply chains. Compliance with traceability and obsolete parts management standards is critical to maintaining operational readiness and regulatory alignment within defense logistics operations.

Defense Logistics Agency

POSTED

DEADLINE

Medical and Military Compliance Labeling ServicesThe contract pertains to the application of standardized labels on military medical supplies in compliance with Medical Marking Standard No. 1, ensuring full traceability and interoperability across the Department of Defense supply chain. Labels must include a 2D Data Matrix barcode encoded with critical data elements such as the National Stock Number, CAGE code, lot and expiration dates, and the contract identifier, enabling accurate inventory management, distribution, and field use of medical materiel. All labeling must adhere strictly to DOD specifications to support automated scanning and logistical tracking at any point from warehouse to point of care. The solicitation is issued as a subcontract under the NAICS code 811212, targeting service providers capable of executing high-precision labeling operations. The place of performance is specified as FPO with ZIP code 96672-4090, indicating delivery must be coordinated through military postal channels. The proposal deadline is set for July 22, 2026, with the solicitation posted on July 16, 2026, offering a six-day window for submissions. The contracting office, part of the Medical Supply Chain MD Surg FSF, operates under the Department of Defense, and the requirement is critical to sustaining operational readiness and compliance with federal medical logistics protocols.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

DEADLINE

Quality Inspection and Destination Acceptance SupportThis contract seeks qualified contractors to provide quality inspection and destination acceptance support for defense-related equipment, adhering strictly to MIL-STD-1916 and ASQ Z1.4 standards for sampling and acceptance procedures. The scope includes comprehensive inspection services at the destination, identification and reporting of non-conformances, thorough documentation of all inspection activities, and coordination of rework or corrective actions to ensure delivered items meet required specifications. All work must be performed at the designated place of performance in New Cumberland, Pennsylvania, with full compliance to federal quality and reporting protocols. The contract is structured as a subcontract under the NAICS code 811212, indicating a focus on industrial and commercial equipment repair and maintenance support, and is issued by the Department of Defense through LAND SUPPLIER OPNS ENGINES. Proposals must be submitted by the deadline of July 27, 2026, and the solicitation is active as of July 16, 2026. The contractor is expected to maintain rigorous procedural discipline, provide timely communication on non-conformances, and ensure full traceability of inspection outcomes and rework efforts to meet Department of Defense quality assurance expectations.

LAND SUPPLIER OPNS ENGINES

POSTED

1 day ago

DEADLINE

in 9 days

AI Contract Overview

The contract entails the physical installation, calibration, and comprehensive user training for digital photographic printers at various Department of National Defence locations throughout Canada. This work requires on-site execution by qualified personnel to ensure proper setup and optimal performance of the equipment in military environments, with a focus on reliability and precision in photo printing operations. The service includes ensuring all systems are fully functional, calibrated to meet technical standards, and that end users receive thorough instruction to operate and maintain the printers independently. All activities must be completed at multiple DND sites across the country, requiring flexible scheduling and logistical coordination to accommodate government operations. The contract is classified as a subcontract under NAICS code 811212, with a response deadline of June 16, 2026, and was posted on June 1, 2026. Work must be conducted in alignment with government standards and timelines, and the successful bidder will be responsible for managing travel, equipment transport, and on-site coordination without additional support from the agency. The scope emphasizes technical proficiency, timely delivery, and adherence to security and operational protocols within federal facilities.