Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Plumbing System Installation with Backflow Prevention

Active

Federal

Response Deadline08/03/2026, 03:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract entails the installation of comprehensive plumbing systems within medical facilities, with a strict requirement to specify and install reduced pressure principle backflow preventers in compliance with AWWA C511 standards. This work is critical to ensuring water safety and regulatory adherence in healthcare environments where contamination risks must be rigorously controlled. The scope encompasses all aspects of plumbing system deployment, including design, procurement, and on-site installation, with an emphasis on technical precision and adherence to industry best practices for backflow prevention. The contract is classified as a subcontract under NAICS code 238220, indicating it falls within the plumbing, heating, and air-conditioning contracting sector. It was posted on July 24, 2026, with a response deadline of August 3, 2026, at 3:00 PM, leaving a narrow window for qualified subcontractors to submit proposals. The awarding entity is the Department of Defense, specifically through the W2V6 USA Engineering Support Center in Huntsville, indicating this work supports federal medical infrastructure. The place of performance is not specified, suggesting installations may occur at multiple DoD medical facilities across various locations, requiring flexibility and logistical readiness from the contractor.

General Info

Install plumbing systems with AWWA C511 backflow preventers for DoD medical facilities by August 3, 2026.

Agency

Department Of Defense → W2V6 USA Engineering Spt Ctr HuntsvilView Agency

NAICS

238220 - Plumbing, Heating, and Air-Conditioning ContractorsView NAICS

Place of Performance

AL, KOR

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 24

subcontract

Response DeadlineAug 3

Submission deadline

Response Deadline

08/03/2026, 03:00:00 PM UTCin 8 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → W2V6 USA Engineering Spt Ctr Huntsvil

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → W2V6 USA Engineering Spt Ctr Huntsvil

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Installation of plumbing systems in medical facilities, including specification and installation of reduced pressure principle backflow preventers per AWWA C511.

Similar Contracts

Same NAICS industry code

HVAC and Mechanical Systems InstallationThe contract involves the installation of heating, ventilation, air conditioning, and mechanical systems for buildings and industrial facilities under a total small business set-aside, reserved exclusively for small businesses as defined by the SBA. The NAICS code 238220 indicates this project falls under the specialty trade contracting category for HVAC and mechanical work. The opportunity is managed by the Department of Defense through its W071 Endist Portland entity with the required performance located in Portland, Oregon, specifically at the 97204 ZIP code area. All proposals must be submitted by the deadline of August 5, 2026, at 10:00 PM Eastern Time, following the subcontract structure and compliance requirements tied to federal acquisition regulations for small business programs. Work under this contract will demand expertise in system design, installation, and integration across complex facility environments, with strict adherence to defense standards and operational specifications.

W071 Endist Portland

POSTED

DEADLINE

Pumping and Hydraulic SystemsThe contract titled Pumping and Hydraulic Systems is a small business set-aside subcontract under the NAICS code 238220, specifically designated as a Total Small Business Set-Aside in accordance with FAR 19.5, ensuring that only small businesses are eligible to compete. The work involves the installation, maintenance, and support of pumping stations, hydraulic power units, and fluid transfer systems, with all performance obligations centered in Portland, Oregon, at the zip code 97204. The solicitation was posted on July 25, 2026, and responses must be submitted by August 5, 2026, at 10:00 PM Eastern Time. The contracting office is under the Department of Defense, identified as W071 Endist Portland, though no specific point of contact or additional organizational details are provided. The contract opportunity is accessible via the SAM.gov platform for interested small businesses seeking performance-based subcontracting opportunities within defense infrastructure support.

W071 Endist Portland

POSTED

DEADLINE

Fire Protection and Fire AlarmsThe contract titled Fire Protection and Fire Alarms pertains to the installation of comprehensive fire protection systems and fire alarm systems as part of a full facility systems upgrade. It is classified as a subcontract under NAICS code 238220, which corresponds to fire protection contractor services. The opportunity was posted on July 25, 2026, with a response deadline of August 7, 2026, at 2:00 AM. The place of performance is located in Higashimatsushima with a postal code of 981-0503, and the contracting agency is the Department of Defense under the designation FA5025 356 Eceg Pk. No specific set-aside information or point of contact details are provided, and the work is expected to be delivered at the designated location without further geographic clarification beyond the city and postal code.

FA5025 356 Eceg Pk

POSTED

DEADLINE

HVAC and Climate Control SystemsThe contract requires the installation of HVAC and climate control systems to maintain precise environmental conditions within warehouses, ensuring optimal operational integrity for sensitive materials or processes. The work is scoped under NAICS code 238220, indicating specialized building equipment contractors, and is categorized as a subcontract with no specific set-aside provisions. Performance is designated for Higashimatsushima, Japan, with a zip code of 981-0503, though no city or state details are provided beyond the location name. The Department of Defense is the contracting agency under the designation FA5025 356 Eceg Pk, indicating a military or defense-related facility. The solicitation was posted on July 25, 2026, and responses are due by August 7, 2026, at 2:00 AM UTC, leaving a narrow window for submission. All activities must comply with environmental control standards necessary for warehouse operations under defense logistics requirements.

FA5025 356 Eceg Pk

POSTED

DEADLINE

Temporary Boiler and Control Room SetupThe contract titled Temporary Boiler and Control Room Setup is a subcontract awarded under a Service-Disabled Veteran-Owned Small Business Set Aside, targeting the provision and installation of temporary boiler units and mobile control rooms to ensure uninterrupted steam operations during construction activities. The work is required at a location in Dublin, Georgia, with a NAICS code of 238220 indicating it falls under the specialty trade contractors category for heating, plumbing, and air-conditioning. The contract was posted on July 25, 2026, and is administered by the 247-NETWORK Contract Office 7 under the Department of Veterans Affairs, reflecting the federal government’s commitment to supporting service-disabled veteran-owned small businesses in critical infrastructure maintenance tasks. This effort is essential for maintaining operational continuity at VA facilities undergoing construction, ensuring that steam-dependent systems remain functional without disruption.

247-NETWORK Contract Office 7 (36C247)

POSTED

DEADLINE

Boiler System Installation and Controls IntegrationThe contract involves the installation of three new steam boilers within a medical facility located in Dublin, Georgia, with full integration into the existing control systems, piping, and mechanical infrastructure. This work is critical to ensuring reliable heating and operational efficiency in a healthcare environment where continuous system performance is essential. All equipment and systems must meet stringent medical facility standards for safety, reliability, and compliance with environmental and operational regulations. The contract is a subcontract classified under NAICS code 238220 for Plumbing, Heating, and Air-Conditioning Contractors, and it is specifically set aside for Service-Disabled Veteran-Owned Small Businesses. The solicitation is managed by the Department of Veterans Affairs through its 247-NETWORK Contract Office 7, indicating a procurement initiative aligned with federal veteran-owned business support programs. Performance of the work is restricted to the designated medical facility in Dublin, with all systems required to be commissioned and fully operational within the timeline and specifications outlined by the contracting authority.

247-NETWORK Contract Office 7 (36C247)

POSTED

DEADLINE

PEIG-TIE Shaw Building - AHU ReplacementThe Government of Prince Edward Island, through the Department of Transportation, Infrastructure and Energy, is soliciting bids for the replacement of air handling units at the Shaw Building in Charlottetown under tender number 3750-26017. All submissions must be received in clearly marked, sealed envelopes at the Security Desk of the Jones Building, 11 Kent Street, Charlottetown, PEI, no later than 2:00 PM local time on Thursday, August 13th, 2026. Tender documents are accessible exclusively online via the Prince Edward Island government tenders portal, and no hard copies will be provided. Bidders are encouraged to attend the public opening of tenders at the specified time and location. The contract is open to all eligible parties, and while the lowest bid will be considered, it is not guaranteed to be accepted. The contracting authority is Jonathan Gauthier, who can be reached by phone at 902-368-5128 or by email at jwgauthier@gov.pe.ca. This procurement is classified under federal sponsorship, with performance localized to Prince Edward Island.

Gov of PEI - Transportation, Infrastructure and Energy

POSTED

DEADLINE

Network Infrastructure and ConnectivityThe contract for Network Infrastructure and Connectivity requires the delivery of structured cabling, Wi-Fi access points, and VLAN configuration to enable full network readiness for smart room functionality within facilities operated by Tax Administration Jamaica under the Government of Jamaica. The scope encompasses the installation and integration of physical and wireless network components to support advanced room technologies, ensuring seamless connectivity, data transmission, and system interoperability across designated areas. All work must meet industry standards for reliability, scalability, and security to sustain the operational demands of smart environments. The contract is classified as a subcontract with a NAICS code of 238220, indicating it falls under telecommunications and related construction services. The solicitation was posted on July 24, 2026, with a response deadline of August 17, 2026, at 3:00 PM. Performance is expected to occur at locations under Jamaican government jurisdiction, though specific site details are not provided. The procurement is aligned with broader digital transformation initiatives by Tax Administration Jamaica to modernize infrastructure and enhance service delivery through technology-enabled spaces.

Tax Administration Jamaica

POSTED

DEADLINE

Plumbing System InstallationThe contract entails the full installation of plumbing systems within an occupied building, encompassing supply lines, drainage networks, and vent piping, with strict adherence to operational constraints due to the building’s active use. Work must be meticulously coordinated with other trades to ensure seamless integration and minimal disruption, requiring scheduled access, noise mitigation, and strict protection of existing finishes, fixtures, and infrastructure throughout the project lifecycle. All activities must comply with applicable codes and standards while maintaining the safety and functionality of the occupied spaces. The solicitation is classified as a subcontract under NAICS code 238220, issued by the Hawaii office of the Department of Business, Economic Development, & Tourism, with a response deadline of August 22, 2026. The project requires demonstrated experience in working within occupied environments, robust logistics planning, and the ability to manage complex scheduling alongside environmental and occupancy safeguards. Contractors must be prepared to adapt to evolving conditions on-site and deliver compliant, high-quality plumbing systems without compromising the building’s daily operations.

Department of Business, Economic Development, & Tourism

POSTED

DEADLINE

Fuel System Design and Installation (FMVSS 301 Compliance)The contract entails the design and installation of a complete fuel system including fuel tanks, transfer lines, and fillers, all engineered to meet the Federal Motor Vehicle Safety Standard 301 requirements for crashworthiness and fuel spillage prevention. All components must be constructed and assembled with fireproof sleeves installed to enhance thermal protection and minimize fire risk during or after impacts. The work must be executed to ensure full compliance with federal safety regulations for vehicle fuel systems under crash conditions, with no tolerance for deviations that could compromise occupant safety or environmental integrity. This is a subcontract opportunity issued by the Department of Transportation through its Hawaii office, with a solicitation posted on July 24, 2026, and a response deadline set for August 15, 2026. The North American Industry Classification System code 238220 indicates the work falls under specialty trade contracting for plumbing, heating, and air-conditioning-related services, aligning with specialized vehicle fuel system installations. The place of performance and specific contact details are not provided, but the project is likely tied to state or federally funded transportation assets requiring stringent safety certification. Bidders must demonstrate technical capability, compliance history, and experience with FMVSS 301 standards to be considered eligible.

Department of Transportation

POSTED

DEADLINE

Honuakaha Hot Water Return Systems ModificationsModifications are being sought for the domestic tankless hot water return systems serving 151 rental units in a residential building at 545 Queen Street, Oahu, under the solicitation titled Honuakaha Hot Water Return Systems Modifications. The project aims to enhance the efficiency and reliability of the existing hot water infrastructure to better serve residents, with work to be performed entirely on Oahu. The solicitation was posted on July 24, 2026, and responses are due by August 22, 2026. This opportunity is being managed by the Hawaii Department of Business, Economic Development, & Tourism, under the state agency classification of SLED, though no specific set aside or NAICS code has been designated. All inquiries and communications should be directed to Wendi Reyes, the primary point of contact, via email at wendi.reyes@hawaii.gov or phone at 808-594-0326, with Charlyn Ontai listed as a secondary contact. Further details and official documentation are available through the state’s procurement portal at the provided UI link.

Department of Business, Economic Development, & Tourism

POSTED

DEADLINE

Allentown Lead Service Line Replacements, Cycle 3 Contract AThe Lehigh County Authority is soliciting bids for the replacement of 1,000 lead service lines in Allentown, Pennsylvania, through two separate contracts—Contract A and Contract B—each covering 500 replacements. The work involves the full removal and replacement of lead service lines on both public and private sides, with all construction activities required to comply with state and federal regulations, including the Build America, Buy America Act, the Steel Products Procurement Act, and the Davis-Bacon Act, which mandates payment of prevailing wages. All bids must be submitted electronically through the PennBid portal by August 31, 2026, with Contract A opening at 10:00 AM and Contract B at 2:00 PM, and each bid must include a bid security of ten percent of the bid amount in the form of a certified check or bond. Bids will remain open for 60 days after opening, extendable to 120 days if award delays occur due to funding approvals, bond sales, or grant awards. A mandatory virtual pre-bid meeting was held on August 11, 2026, and all bidder questions had to be submitted in writing via PennBid by August 19, 2026. Compliance with Disadvantaged Business Enterprise (DBE) participation requirements is mandatory, requiring bidders to demonstrate six good faith efforts to solicit state-qualified DBE firms, with documentation of those efforts submitted with the bid; failure to submit this documentation may result in bid rejection. The project is partially funded through PENNVEST and other federal and state sources, obligating contractors to comply with federal Executive Orders 11625, 12138, and 12432, as well as EPA regulations concerning DBE inclusion. Contractors must adhere to strict packaging, labeling, and preservation standards for materials, including machine-printed, UV- and water-resistant labels, color-coded markings for systems, and underground warning tape placed six inches below grade. All work must meet specified inspection and testing criteria, including compliance with ASTM, NFPA, and manufacturer standards, with final acceptance conducted on-site by the Engineer acting on behalf of the Owner. Safety requirements are rigorous, mandating OSHA 10-hour certification for safety representatives, full PPE compliance including hard hats and closed-toe safety footwear, prohibition of smoking and inappropriate clothing on site, and implementation of a respiratory protection program where needed. The Owner retains broad

POSTED

DEADLINE

in about 1 month

More opportunities from Department Of Defense → W2V6 USA Engineering Spt Ctr Huntsvil

Same awarding agency

Photographic Documentation and Reporting ServicesThe contract entails the provision of weekly and monthly photographic documentation services to capture and record construction progress for use in reporting, invoicing, and submission to the Real Property Management System. These visual records must be systematically collected and delivered on a consistent schedule to support accurate project tracking, financial reconciliation, and compliance with regulatory requirements. The work is performed under a subcontract arrangement tied to a Department of Defense project managed by the W2V6 USA Engineering Support Center in Huntsville, with the North American Industry Classification System code 541921 indicating it falls under other engineering services. All submissions must adhere to specified standards to ensure uniformity and usability across internal and external oversight functions. Responses to the solicitation are due by August 3, 2026, and the opportunity was posted on July 24, 2026. The contract does not specify a set-aside type or detailed location for performance, and no point of contact information is provided within the data. The work is exclusively focused on capturing and organizing photographic evidence without additional labor or material services beyond documentation. Proposers must be prepared to deliver high-quality, time-stamped images with appropriate metadata and formatting to meet reporting and archival needs, ensuring traceability of construction milestones throughout the project lifecycle.

Photography Studios, Portrait

POSTED

DEADLINE

Equipment Procurement and Installation for Medical FacilitiesThe contract pertains to the procurement, delivery, and installation of specialized medical and facility equipment essential for operational readiness in defense medical environments, including full integration of HVAC systems and medical gas infrastructure. All equipment must be installed in compliance with stringent technical and safety standards, followed by comprehensive commissioning to ensure system functionality and regulatory adherence. The contractor is required to deliver complete operation and maintenance documentation to support long-term facility performance and troubleshooting capabilities. This subcontract is issued under the NAICS code 333318, aligning with medical equipment manufacturing and installation services, and is managed by the Department of Defense through the W2V6 USA Engineering Support Center in Huntsville. Responses are due by August 3, 2026, with no set-aside provisions designated, making it open to all qualified bidders regardless of business size or status.

Other Commercial and Service Industry Machinery Manufacturing

POSTED

DEADLINE

Safety and Health Compliance ServicesThe contract entails the provision of comprehensive on-site safety and health compliance services specifically focused on the development, implementation, and enforcement of critical safety plans including the Accident Prevention Program and Fall Prevention Plan. The work requires dedicated personnel to perform immediate safety oversight at the project site, ensuring adherence to federal safety standards and promoting a culture of hazard mitigation and workplace safety. This is a subcontract under a Department of Defense initiative managed by the W2V6 USA Engineering Support Center in Huntsville, classified under NAICS code 541620 for management, scientific, and technical consulting services. Responses to this solicitation must be submitted by August 3, 2026, at 3:00 p.m., with the work expected to commence following award and be performed at an undesignated location under the Department of Defense’s jurisdiction. The contract does not specify any set-aside status and the place of performance details are not provided, suggesting site-specific requirements will be determined post-award. All parties interested must engage through the official SAM.gov portal to access the full solicitation and submit proposals.

Environmental Consulting Services

POSTED

DEADLINE

Crane and Heavy Equipment OperationsThe contract governs the execution of critical crane lifts and heavy equipment operations essential to construction or renovation projects, requiring strict adherence to formal lift planning procedures and the use of certified crane operators. All activities must be conducted in compliance with industry safety standards and regulatory requirements, ensuring the secure handling of heavy loads under complex site conditions. The work is classified under NAICS code 238910 and is structured as a subcontract under the Department of Defense, specifically managed by the W2V6 USA Engineering Support Center in Huntsville. Responses must be submitted no later than August 3, 2026, at 3:00 PM, with no set-aside provisions applied. The contract does not specify a geographic location for performance, but the responsible agency is a DoD entity, indicating the work may support federal infrastructure or defense-related construction efforts. While contact details and performance address are not provided, the official solicitation can be accessed through the SAM.gov portal for further procedural requirements and technical specifications.

Site Preparation Contractors

POSTED

DEADLINE

Temporary Construction Site Fencing Supply and InstallationThe contract pertains to the supply and installation of high-visibility temporary fencing designed to secure active construction zones in accordance with strict force resistance and visibility standards mandated for federal projects. The work involves deploying durable, weather-resistant fencing that ensures both safety and compliance with regulatory requirements, particularly in environments where public and worker protection are critical. All materials and installation methods must meet performance benchmarks for impact resistance, durability under environmental stress, and visual discernibility to prevent accidental intrusion into hazardous areas. This is a subcontract under the NAICS code 238990, issued by the Department of Defense through the W2V6 USA Engineering Support Center in Huntsville, with a response deadline of August 3, 2026. The place of performance has not been specified, indicating flexibility in location across defense-related construction sites requiring temporary security barriers. Contractors must be prepared to deliver and install fencing systems with minimal disruption, adhering to federal timelines and quality controls without predefined set-aside conditions, leaving the opportunity open to qualified general subcontractors capable of fulfilling the technical and logistical demands of the scope.

All Other Specialty Trade Contractors

POSTED

DEADLINE

Medical Facility Renovation and Alteration ConstructionThe contract involves a full-scale renovation, alteration, and repair of medical facilities under the NAICS code 236220, focusing on structural modifications and strict adherence to health and safety codes. This subcontract is managed by the Department of Defense through the W2V6 USA Engineering Support Center in Huntsville, with work to be performed at unspecified medical facility locations. The solicitation was posted on July 24, 2026, and responses are due by August 3, 2026, at 3:00 PM. The scope requires experienced contractors capable of handling complex renovations in active healthcare environments, ensuring all work meets federal medical facility standards without disrupting essential services. No set-aside classification is specified, and the place of performance details are not provided, indicating the projects may span multiple DoD medical sites. The opportunity is accessible through the SAM.gov portal for qualified subcontractors seeking to support military healthcare infrastructure upgrades.

Commercial and Institutional Building Construction

POSTED

DEADLINE

Modular Power Enclosures Program (MPEP) ConstructionThe Modular Power Enclosures Program includes the design, fabrication, and installation ofprefabricated, environmentally sealed, and EMP-shielded power enclosures specifically engineered for missile defense systems. These enclosures must meet rigorous performance standards to ensure operational reliability under extreme conditions, including electromagnetic pulse exposure, harsh weather, and prolonged field deployment. All components must be manufactured with precision to enable rapid on-site assembly while maintaining complete environmental and electromagnetic integrity, with materials and construction methods selected to withstand long-term exposure to corrosion, vibration, and thermal cycling. The project requires full compliance with Department of Defense technical specifications and quality assurance protocols throughout the entire lifecycle. The contract is a subcontract under the Department of Defense, with the prime activity managed by the W2V6 USA Engineering Support Center in Huntsville. Performance is expected to occur predominantly in Huntsville, Alabama, though logistics and transportation arrangements may extend beyond this location. The solicitation window opened on July 24, 2026, with responses required by August 10, 2026, leaving a limited timeframe for qualified vendors to submit proposals. The NAICS code 332323 indicates classification under Electrical Equipment and Equipment Manufacturing, signaling the technical specificity and industrial expertise required. Interested parties must demonstrate proven experience in defense-grade shielding technology, modular construction, and prior work with sensitive military systems to be considered eligible for award.

Ornamental and Architectural Metal Work Manufacturing

POSTED

DEADLINE

Commissioning and Testing ServicesThe contract solicits services for functional testing, systems commissioning, and performance verification of mechanical, electrical, and control systems within federal facilities, specifically under the Department of Defense’s W2V6 USA Engineering Support Center in Huntsville. The work involves ensuring all building systems operate as designed, meet performance specifications, and are fully integrated and validated prior to acceptance, with an emphasis on compliance with federal standards and operational readiness. The contract is structured as a subcontract with a NAICS code of 541330, indicating it falls under engineering services. Responses are due by August 10, 2026, at 1:00 PM, following a posting date of July 24, 2026. The place of performance is firmly designated as Huntsville, and while no specific set-aside provisions or point of contact details are provided, the scope requires specialized technical expertise in system commissioning across multiple disciplines. Contractors must be prepared to deliver rigorous verification protocols and documentation to confirm system integrity and functionality across federal infrastructure projects managed by the Department of Defense.

Engineering Services

POSTED

DEADLINE

Equipment Procurement and InstallationThe contract entails the procurement, delivery, and installation of military-standard compliant equipment including generators, HVAC units, security systems, and modular power enclosures, all required to meet MIL-STD specifications for ruggedness, reliability, and performance in demanding environments. This subcontract is part of a broader Department of Defense initiative led by the W2V6 USA Engineering Support Center in Huntsville, with all work to be performed at that location. The equipment will support critical infrastructure needs, ensuring operational continuity, environmental control, and physical security for defense-related facilities. All submissions must be received by August 10, 2026, with the solicitation having been posted on July 24, 2026. The NAICS code 423600 classifies this procurement under Electronic and Equipment Wholesalers, indicating the focus is on distribution and integration of specialized technical hardware rather than manufacturing. The contract does not specify set-aside provisions or small business preferences, and the point of contact details are not provided. Compliance with all military standards, timely logistics coordination, and secure installation protocols are essential to meeting contract obligations.

POSTED

DEADLINE

Protective Infrastructure and Facility ModificationsThe contract seeks subcontractors to design and execute construction or retrofitting of blast-resistant walls, hardened structures, secure entryways, and other physical protection systems aimed at enhancing facility security. Work is focused on Huntsville, with performance obligations centered there, and is classified under NAICS code 238990 for other specialized construction activities. The opportunity is issued by the Department of Defense through the W2V6 USA Engineering Support Center, with a deadline for responses set for August 10, 2026, and a posting date of July 24, 2026. This is not a set-aside contract, meaning it is open to all qualified bidders regardless of business size or ownership status. No point of contact is listed, and the solicitation number is not provided, suggesting the opportunity may require direct engagement through the SAM.gov portal for full details and submissions.

All Other Specialty Trade Contractors

POSTED

DEADLINE

Design-Build Facility ConstructionThe contract mandates the full design-build delivery of secure commercial and institutional facilities, encompassing comprehensive architectural, structural, and MEP systems integration to meet stringent security and operational standards. All phases of the project—from initial design through construction and commissioning—are to be executed under a single contract vehicle, ensuring seamless coordination between disciplines and accountability for performance, schedule, and compliance with federal security requirements. The opportunity is designated as a subcontract under NAICS code 236220, with the Department of Defense through the W2V6 USA Engineering Support Center in Huntsville serving as the overseeing agency. Performance is required in Huntsville, and responses must be submitted by August 10, 2026, with the solicitation posted on July 24, 2026. While no specific set-aside classification is provided, the scope emphasizes compliance with defense infrastructure protocols, requiring contractors to demonstrate proven experience in delivering secure, high-integrity facilities within a design-build framework.

Commercial and Institutional Building Construction

POSTED

DEADLINE

Utility Installation (Electrical, Communications, Water, Sewer)The contract calls for the installation of underground and above-ground utility systems at secure Department of Defense facilities in Huntsville, Alabama, encompassing power distribution, fiber optic communications, water supply, sewer lines, and storm drainage infrastructure. This subcontract is classified under NAICS code 237130 for utility system construction and requires full compliance with security protocols due to the sensitive nature of the sites. Work must meet rigorous technical and safety standards set by federal and military specifications, with all systems designed for long-term functionality, redundancy, and resistance to environmental and operational stressors. Responses are due by August 10, 2026, with the solicitation posted on July 24, 2026, through the SAM.gov platform. The contract is managed by the USA Engineering Support Center in Huntsville, and bidders must be prepared to coordinate with multiple government entities and possibly adhere to classified site access requirements. Performance is expected to occur entirely within the Huntsville area, and contractors must demonstrate proven experience in complex utility installations at secured governmental facilities, including prior work with military or federal infrastructure projects. All work must be completed in alignment with applicable federal, state, and local codes while maintaining operational security at all times.

Power and Communication Line and Related Structures Construction

POSTED

DEADLINE