Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

SCADA System Upgrades and Compliance Support

Active

State & Local

Response Deadline07/31/2026, 10:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract seeks technical expertise to support the upgrade of SCADA hardware and software systems, with the primary objectives of ensuring regulatory compliance and modernizing critical infrastructure. The work involves providing accurate technical estimates and hands-on implementation assistance throughout the upgrade process, ensuring seamless integration of new systems while maintaining operational continuity and meeting all applicable standards. The scope is focused on enabling the California Department of Corrections & Rehabilitation to maintain secure, reliable, and up-to-date supervisory control and data acquisition capabilities. The opportunity is issued as a subcontract under NAICS code 541511, indicating it is for custom computer programming services, and is posted on the CalEProcure portal with a response deadline of July 31, 2026. While no specific location for performance is detailed, the contracting agency is based in California, and the work is expected to support state-owned facilities and systems under its jurisdiction. There is no set-aside designation specified, and no point of contact information has been provided, requiring potential bidders to review the official posting on the CalEProcure platform for additional submission details.

General Info

Upgrade SCADA systems for California CDCR to ensure compliance and modernize infrastructure through custom programming services.

Agency

California Department of Corrections & RehabilitationView Agency

NAICS

541511 - Custom Computer Programming ServicesView NAICS

Place of Performance

CA, USA

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 16

subcontract

Response DeadlineJul 31

Submission deadline

Response Deadline

07/31/2026, 10:00:00 PM UTCin 14 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyCalifornia Department of Corrections & Rehabilitation

ContactsNo contacts available

OfficeN/A

Organization / Agency

California Department of Corrections & Rehabilitation

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Provide technical estimates and implementation support for SCADA hardware/software upgrades to ensure regulatory compliance and system modernization.

Similar Contracts

Same NAICS industry code

D--Software Development Services for Coastal Remote S

Office Of Acquisiton Grants

POSTED

about 19 hours ago

DEADLINE

7A21--Amion Enterprise Agreement (VA-26-00071814)The Department of Veterans Affairs Technology Acquisition Center intends to award a sole source contract to DOXIMITY INC. for the subscription and ongoing technical support of the Amion healthcare scheduling platform, which enables VA hospitals to manage real-time on-call and shift schedules for medical staff, ensuring timely provider availability for urgent care needs such as stroke, heart attack, and emergency surgeries. This platform supports Veteran-centered care by aligning physician coverage with critical specialty and mental health requirements. Technical support must be provided 24/7/365 and include all updates, security patches, system fixes, regulatory compliance adjustments, third-party integrations, and seamless migration of data from existing non-Amion systems without operational disruption. The contract will be awarded as a firm-fixed-price agreement under the sole source authority of FAR 6.103-1, as Amion is deemed the only solution meeting the Department’s unique requirements. Interested parties may submit a capabilities statement by July 22, 2026, at 1:00 PM EST to demonstrate their ability to fulfill the requirement, but the Government retains full discretion to proceed without competition if no viable alternatives are presented. All submissions must be in writing; verbal responses will not be considered. The point of contact for this action is Phillip Kang, Contract Specialist, reachable at Phillip.kang@va.gov.

Technology Acquisition Center Nj (36C10B)

POSTED

about 19 hours ago

DEADLINE

Electronic Flight Bags-iPad Mini 7The United States Air Force is seeking a single Firm Fixed Price Purchase Order for Apple iPad Mini 7 models, specifically the 8.3-inch A17 WiFi variant with 256GB storage, to support electronic flight bag requirements. All offerings must meet the exact specifications detailed in Attachment 1 and are required to be delivered directly to Aviano Air Base in Italy. This acquisition is exclusively reserved for Women-Owned Small Businesses certified in the SBA’s Small Business Certification database; only qualifying WOSB entities are eligible to respond, and non-WOSB submissions will be rejected outright. The solicitation number is FA568226QA058, with responses due by July 27, 2026, and the North American Industry Classification System code is 541511. Funds for this requirement are not currently available, and any award is entirely contingent upon the future appropriation of funds in accordance with FAR 52.232-18. The U.S. Government reserves the right to make no award regardless of the number or quality of submissions. The contract opportunity is managed by the Department of Defense through the office headquartered in APO, AE, with Point of Contact Jason Haro as the primary representative and Jessica De Benedet as the secondary contact. The solicitation is posted on SAM.gov under the specified UI link and is categorized as a combined source selection with a sole source WOSB set-aside.

FA5682 31 Cons (unit 6102)

POSTED

about 19 hours ago

DEADLINE

Notice of Intent to Sole Source Services for Feature Development of Adaxis AdaOne software platformThe U.S. Army Corps of Engineers, Engineer Research and Development Center’s Geotechnical and Structures Laboratory, Concrete and Materials Branch, intends to award a sole-source contract to Adaxis USA, Inc. for the development, maintenance, enhancement, and technical support of the AdaOne software platform, which is critical to advancing additive manufacturing research for large civil works components. The software must deliver precise control over fiber-reinforced deposition, including continuous toolpath generation without breaks, discrete start and stop zones for regional fiber application, gradual initiation sequences to protect connection points, user-defined preferential directions for fiber infill, and strict geometric constraints to enforce minimum and maximum bend radii—recommended at 1 to 2 centimeters—to prevent fiber damage. These capabilities are essential to ensuring the reliability and performance of 3D-printed structural elements under research conditions. The procurement falls under NAICS code 541511 for custom computer programming services with a $34 million size standard and is being conducted under FAR Part 12 for commercial products and services. This notice is not a solicitation for competitive bids, but parties may submit capability statements with pricing by the deadline of 3:00 p.m. Central Time on Friday, July 24, 2026, via email to the designated points of contact. Submissions must be in Word, Excel, or PDF format and will be evaluated solely to determine whether competition is feasible. If no meaningful responses are received within fifteen days of publication, the acquisition will proceed as a sole-source award to Adaxis USA, Inc. No phone inquiries will be accepted, and the Government retains full discretion over the decision to proceed without competition.

W2R2 USA Engr R & D Ctr

POSTED

about 19 hours ago

DEADLINE

Web-Based Training Development for Ralph H Johnson VAMCThis contract seeks web-based training development services for the Ralph H Johnson VAMC under RFQ 36C24726Q0690, structured as a firm-fixed price award through a commercial items solicitation under FAR Part 12. The requirement is strictly set aside 100% for small businesses, with the NAICS code 541511 (Custom Computer Programming Services) and a size standard of $34.0 million. The work involves two distinct phases: a base year from September 1, 2026, through August 31, 2027, and an optional one-year extension from September 1, 2027, through August 31, 2028. Key deliverables include ongoing oversight, support, and enhancement of the Transplant Medication Monitoring Dashboard across five VA sites, as well as integration of digital and graphic enhancements with interactive learning modules on top of the existing base-year system. Quotes must be submitted via email to thaddeus.gray@va.gov no later than July 28, 2026, at 12:00 PM ET, with no hand delivery or fax accepted, and must adhere to a 4MB email limit. Offers must include two volumes: technical capability demonstrating compliance with the Statement of Work and a complete pricing schedule covering both base and option periods. All submissions must be signed, dated, and include the solicitation number, offeror’s UEI, contact details, and explicit agreement with all terms. Offers are evaluated on technical capability and price, with past performance considered but carrying less weight than the other two factors. The government may award without discussions and reserves the right to reject any or all offers. Contract performance is F.O.B. destination at the Charleston, SC, VA facility, with delivery expected within 30 days of award. The contract includes standard FAR provisions for inspection, acceptance, payment, disputes, and termination for convenience or cause, along with specific clauses addressing contractor compliance with labor standards, equal opportunity, prohibitions on trafficking and discriminatory DEI activities, cybersecurity, and electronic payments via EFT. The contract duration, including any options, is capped at five years, with a 6-month services extension available under 52.217-8. Compliance with SAM registration, prompt payment rules, and the VA’s specific requirements such as electronic payment submissions and adherence to Executive Order 13899 is mandatory

247-NETWORK Contract Office 7 (36C247)

POSTED

about 19 hours ago

DEADLINE

AI-Enabled Manpower Modeling and Readiness Optimization Solution

Director Of Contracting

POSTED

about 19 hours ago

DEADLINE

Website Redesign & Front-End DevelopmentThe City of Meriden is seeking a contractor to redesign and develop a modern, accessible, and mobile-responsive website using HTML5, CSS3, and JavaScript. The project requires comprehensive UI/UX design, planning for content migration, and full front-end implementation to ensure a seamless user experience across all devices. The website must meet current accessibility standards and reflect the City’s commitment to inclusive digital services. This subcontract opportunity is open for bids with a response deadline of August 7, 2026, and is classified under NAICS code 541511 for custom computer programming services. All work is to be performed in support of the City of Meriden’s digital presence, with submissions managed through the Connecticut Purchasing portal.

POSTED

about 20 hours ago

DEADLINE

Cybersecurity for Controlled Unclassified Information (CUI)The contract requires the implementation of NIST Special Publication 800-171 security controls to protect Controlled Unclassified Information (CUI) within contractor systems, ensuring compliance with federal cybersecurity standards for handling sensitive but unclassified data. This subcontract is tied to the Department of Defense and specifically supports the Medical Supply Chain MD Surg FSF, with performance centered at Fort Stewart, Georgia, 31314-5185. The solicitation, posted on July 16, 2026, mandates a response by July 22, 2026, and falls under NAICS code 541511, indicating it pertains to computer systems design and related services. Compliance with NIST SP 800-171 involves establishing and maintaining a range of security controls covering access control, audit, configuration management, identification and authentication, maintenance, media protection, personnel security, physical protection, risk assessment, system and communications protection, and incident response to secure CUI at all stages of handling. Contractors must demonstrate the technical capability and operational readiness to fully implement these controls within their information systems before performance begins.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

DEADLINE

Electronic Invoicing and WAWF Integration SupportThe contract seeks support services for electronic invoicing through the Wide Area Workflow system, encompassing end-to-end invoice submission, coordination of receiving reports, and monitoring of payment status to ensure timely and accurate financial processing. This subcontract is focused on integrating and maintaining seamless operations within the Department of Defense’s maritime supply chain, requiring proficiency in DLA’s WAWF platform and adherence to standardized federal invoicing protocols. The work is performance-based and must be executed at the specified location in New Cumberland, Pennsylvania, with a zip code of 17070-5002. The solicitation was posted on July 16, 2026, with responses due by July 27, 2026, and falls under the NAICS code 541511 for Computer Systems Design Services. While no set-aside designation is specified, the contract is classified as a subcontract within the broader DOD procurement framework. The agency responsible is the Maritime Supply Chain under the Department of Defense, and interested parties must engage through the official DIBBS portal to submit proposals. All deliverables must align with federal requirements for electronic data interchange and financial accountability, emphasizing accuracy, timeliness, and compliance with DoD standards.

MARITIME SUPPLY CHAIN

POSTED

DEADLINE

API & System Integration ServicesThe contract seeks qualified vendors to develop and manage API and SFTP integrations between a SaaS platform and the existing systems of the Trinity River Authority of Texas, ensuring seamless data synchronization in JSON and CSV formats. The work involves designing secure, reliable data exchange protocols that align with the Authority’s infrastructure requirements, supporting real-time or scheduled transfers of operational and administrative data. Vendors must demonstrate expertise in integration architecture, data mapping, error handling, and system compatibility across disparate platforms. This subcontract opportunity is open for response until August 7, 2026, with a competitive bid process managed through the ProcureWare platform. The NAICS code 541511 indicates the scope centers on custom computer programming services, emphasizing technical implementation over general consulting. The place of performance and agency office details are unspecified, but the work will directly support Texas-based operations. Proposals must address compliance with industry standards for data security, interoperability, and system uptime, as failures may impact critical water resource management functions.

Trinity River Authority of Texas

POSTED

DEADLINE

Prohibition on Foreign Telecom Equipment ComplianceThis contract mandates strict adherence to Section 889 of the National Defense Authorization Act, prohibiting the acquisition or use of covered foreign telecommunications equipment, including products from Huawei and ZTE, within all operations tied to the performance scope. The subcontractor must ensure full compliance throughout the supply chain, verifying that no equipment, components, or services derived from restricted entities are integrated into systems, networks, or infrastructure supporting the Department of Defense mission at the New Cumberland facility. Failure to comply could result in contract termination, financial penalties, or loss of eligibility for future federal awards. The solicitation is open for responses until July 27, 2026, and is classified under NAICS code 541511 for computer systems design services. The place of performance is designated as New Cumberland, Pennsylvania, with ZIP code 17070-5002, and the contracting activity falls under the Department of Defense’s DDS New Cumberland Facility. All parties involved must implement rigorous documentation, supplier vetting, and internal audits to demonstrate ongoing compliance, with unannounced inspections and reporting obligations likely to be enforced as part of contract oversight. No set-aside provisions are specified, meaning the opportunity is open to any qualified entity capable of meeting the stringent security and compliance requirements.

DDSP NEW CUMBERLAND FACILITY

POSTED

DEADLINE

Prohibition on Covered Telecommunications EquipmentThis contract mandates strict compliance with the prohibition on covered telecommunications equipment and services as outlined in DFARS 252.204-7018 and Section 889 of the National Defense Authorization Act. All vendors and subcontractors must undergo thorough certification and screening processes to confirm that no equipment or services derived from prohibited sources—such as those manufactured or provided by Huawei, ZTE, Hytera, Hikvision, or Dahua—are used in the performance of the contract. The requirement applies to all components, systems, and services throughout the supply chain, and failure to comply may result in contract termination or financial penalties. The contracting entity, the Department of Defense through its Medical Supply Chain FSH office, enforces this rule to safeguard national security by eliminating exposure to potential surveillance or cyber threats from foreign adversaries. The solicitation is classified as a subcontract under NAICS code 541511, targeting information technology services, and is open for response until July 23, 2026. Performance will take place at FPO, zip code 09591, with no specific set-aside designation. All offerors must provide documented attestation of compliance, including evidence of vendor due diligence and supply chain audits, prior to award. The contract remains active under federal acquisition regulations and is accessible via the DIBBS platform, with no designated point of contact listed. Participation requires full understanding of and adherence to the prohibitions outlined in the NDAA and DFARS, regardless of the size or nature of the subcontractor’s role in the project.

MEDICAL SUPPLY CHAIIN FSH

POSTED

DEADLINE

More opportunities from California Department of Corrections & Rehabilitation

Same awarding agency

Non-Hazardous Garbage Collection, Removal and Disposal ServicesThe California Department of Corrections & Rehabilitation is soliciting bids for Non-Hazardous Garbage Collection, Removal and Disposal Services exclusively for SCC, with the solicitation open as of July 18, 2026, and responses due by August 4, 2026, at 7:00 PM. This procurement is categorized under SLED government contracting and is focused on service provision within the state of California, though specific city or zip details are not provided. The primary point of contact for inquiries is Sonia Luna-Acosta, reachable via email at sonia.luna-acosta@cdcr.ca.gov. The solicitation is accessible through the CalEprocure portal, and while no Naics code or set-aside designation is specified, all work must be performed within California under the agency’s requirements.

Solid Waste Collection

POSTED

about 7 hours ago

DEADLINE

Asphalt Paving and Roadway SurfacingThe contract entitled Asphalt Paving and Roadway Surfacing is a subcontract issued by the California Department of Corrections & Rehabilitation under NAICS code 237310 for the laying and compacting of asphalt on roadways, parking lots, and access drives. The solicitation was posted on July 16, 2026, with a response deadline of August 5, 2026, at 7:00 PM. Work under this contract is to be performed in Kern County, California, and is intended to support infrastructure maintenance and development within state correctional facilities or related properties. There is no specified set-aside type or organization type designated for this opportunity, and all interested parties must submit responses by the deadline to be considered for award. Performance will be focused on delivering durable, compliant asphalt surfaces meeting state and federal standards for vehicular use.

Highway, Street, and Bridge Construction

POSTED

DEADLINE

Site Grading and EarthworkThe contract titled Site Grading and Earthwork is a subcontract under the California Department of Corrections & Rehabilitation, focused on excavation, cut and fill operations, and site grading to prepare the ground for upcoming construction activities. Work is to be performed at a location in Kern County, California, with all activities centered on earthmoving to achieve proper ground conditions for development. The North American Industry Classification System code 237990 indicates this falls under other heavy and civil engineering construction, specifically related to site preparation. The solicitation was posted on July 16, 2026, and responses must be submitted by August 5, 2026, at 7:00 PM. There is no set-aside designation specified, and the contract is open to qualified subcontractors without apparent restrictions based on business size or category. The process is managed through the Cal eProcure system, and no point of contact details are provided within the document.

Other Heavy and Civil Engineering Construction

POSTED

DEADLINE

Concrete Forming and PlacementThe contract titled Concrete Forming and Placement entails the full scope of concrete work including the installation of formwork, placement of reinforcement, and pouring of both structural and architectural concrete elements such as slabs, walls, and foundations. This subcontract is issued by the California Department of Corrections & Rehabilitation under NAICS code 238110 and requires performance in Kern County, California. The solicitation was posted on July 16, 2026, with a firm response deadline of August 5, 2026, at 7:00 PM. Although no set-aside details or point of contact information is provided, all work must be completed at the designated place of performance to meet the department's facility construction or renovation needs.

Poured Concrete Foundation and Structure Contractors

POSTED

DEADLINE

Plumbing and Piping Systems InstallationThe contract entails the installation of sanitary, storm, and water supply piping systems along with associated fixtures and drainage infrastructure, scoped under the NAICS code 238220 for plumbing, heating, and air-conditioning contractors. This is a subcontract opportunity issued by the California Department of Corrections & Rehabilitation with a performance location in Kern, California. The solicitation was posted on July 16, 2026, and responses are due by August 5, 2026, at 7:00 PM Pacific Time. The work involves full system integration to meet functional and regulatory standards for institutional facilities under the agency’s jurisdiction. There is no specified set-aside designation, and the contract is not tied to a particular procurement category beyond its classification as a subcontract. All work must be executed in alignment with applicable state and local codes, and the successful bidder will be responsible for sourcing materials, labor, and ensuring system compliance from initial installation through final inspection.

Plumbing, Heating, and Air-Conditioning Contractors

POSTED

DEADLINE

Electrical Installation and Wiring ServicesThe contract titled Electrical Installation and Wiring Services is a subcontract solicited by the California Department of Corrections & Rehabilitation under NAICS code 238210, specifying the installation of electrical systems including power distribution, lighting, and control wiring for commercial or infrastructure projects within Kern County, California. The solicitation was posted on July 16, 2026, with a response deadline of August 5, 2026, at 7:00 PM Pacific Time, requiring interested parties to submit proposals prior to the stated cutoff. The place of performance is confined to Kern County, though no specific city or address is provided, and the contract does not indicate a set-asides classification or agency organization type. Subcontractors must be prepared to meet the technical and regulatory requirements for electrical work in state facilities, with all submissions handled through the California eProcurement portal at the provided URL.

Electrical Contractors and Other Wiring Installation Contractors

POSTED

DEADLINE

C5613490-D, Vehicle Lift Preventative Maintenance, Inspection, Testing, and Repair ServicesThe Contractor is required to perform comprehensive preventative maintenance, inspection, testing, and repair services for vehicle lifts at Kern Valley State Prison in Delano, California, under a contract that extends through September 30, 2026. Services must be conducted during normal business hours Monday through Friday, excluding state holidays, and all work must be scheduled in coordination with the Institution Contract Liaison. Compensation is based on fixed rates outlined in Exhibit B-1, which includes all labor, travel, per diem, materials, equipment, tools, permits, and incidental expenses necessary to complete the work. The scope includes preventative tasks such as cable adjustments, anchor torquing, and lubrication of components, as well as safety inspections with the placement of signed inspection stickers and operational testing. Repairs are performed on an unlimited basis upon request, requiring a separate repair proposal for each lift and a completed Service Report (Exhibit A-2) for approval before payment. All services must comply with OSHA, ANSI, and Automotive Lift Institute standards, and each technician must hold a valid California C-61 Limited Specialty license with a D-21 Machinery and Pumps classification, an ALI Lift Inspector Certification, and at least three years of qualifying experience within the past five years. Apprentices and trainees are prohibited. The Contractor must comply with stringent security and access protocols, including submitting a Gate Clearance request at least ten working days in advance for all personnel, providing social security numbers, state ID or driver’s license numbers, and dates of birth, and adhering to strict prohibitions on electronic devices such as cell phones and cameras on prison grounds. All personnel must also meet California’s prevailing wage requirements and comply with the Drug-Free Workplace Act of 1990 and state nondiscrimination statutes. Financial incentives are available for Disabled Veteran Business Enterprises (DVBE), with net bid prices reduced by up to 5% or $500,000 based on participation levels, and up to a 5% preference for non-small businesses subcontracting at least 25% to certified small or micro businesses. The award follows a lowest responsive and responsible bidder model, with responsiveness including adherence to all submission requirements, such as the Bidder Acknowledgment (OBS 300), Rate Sheet, certifications, license copies, and GenAI disclosures. Invoicing must be submitted electronically to a designated CDCR email with a PDF attachment, itemizing parts and labor and always accompanied by an approved Service Report. Payment is contingent upon written

Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance

POSTED

DEADLINE

SCADA System Parts and Component SupplyThe contract involves the supply of OEM or approved replacement parts for GE Fanuc and Allen Bradley SCADA systems, covering essential components such as processors, I/O modules, power supplies, and software licenses. This subcontract is issued by the California Department of Corrections & Rehabilitation to ensure the continued operational integrity of critical SCADA infrastructure through the provision of authentic, compliant, and functional hardware and software components. All supplied parts must meet specified technical standards and be sourced from authorized manufacturers or approved alternatives to guarantee reliability and compatibility within existing systems. The solicitation is open for response until July 31, 2026, and is classified under NAICS code 423690, which pertains to other commercial equipment merchant wholesalers. The contract does not specify a set-aside designation or additional demographic preferences, and the place of performance and point of contact details are not provided. Prospective vendors must be prepared to fulfill requirements consistent with state procurement protocols and deliver parts that support seamless integration into the department’s existing industrial control environment. The opportunity is available through the California eProcurement portal for qualified suppliers seeking to provide mission-critical automation components.

Other Electronic Parts and Equipment Merchant Wholesalers

POSTED

DEADLINE

Emergency SCADA Repair and On-Call SupportThe contract seeks a subcontractor to provide continuous 24/7 emergency response services for SCADA system failures, requiring immediate diagnostic and repair capabilities at all times, including nights, weekends, and holidays. The response must ensure minimal downtime and operational continuity for critical infrastructure under the jurisdiction of the California Department of Corrections & Rehabilitation. The contractor is expected to maintain readiness to deploy promptly, resolve complex technical issues, and support system stability without delay. This is a subcontract under NAICS code 811212, with a response deadline of July 31, 2026, and a posting date of July 16, 2026. The place of performance is not specified beyond the state of California, and no set-aside provisions are indicated. The solicitation is open through the CalEprocure platform, and interested parties must submit their proposals by the stated deadline to be considered for award.

Computer and Office Machine Repair and Maintenance

POSTED

DEADLINE

Non-Emergency SCADA System Repair ServicesThe contract titled Non-Emergency SCADA System Repair Services is issued by the California Department of Corrections & Rehabilitation to secure subcontractor services for routine maintenance and repair of SCADA systems during standard business hours. The work involves scheduled diagnostic assessments, troubleshooting, and both hardware and software repairs necessary to maintain operational integrity without responding to urgent or emergency failures. Services are expected to be performed in alignment with the agency’s operational needs, focusing on preventive and planned interventions rather than reactive measures. The solicitation was posted on July 16, 2026, with a response deadline of July 31, 2026, and is classified under NAICS code 811212, which corresponds to computer and office machine repair and maintenance. The contract is structured as a subcontract and is open for bids through the California eProcurement portal. The place of performance and specific locations are not specified in the data provided, but services are anticipated to support facilities under the jurisdiction of the California Department of Corrections & Rehabilitation across the state. No set-aside provisions are indicated, and no point of contact details are listed in the available information.

Computer and Office Machine Repair and Maintenance

POSTED

DEADLINE

Allen Bradley SLC RS Logix 500 Maintenance and RepairThe contract encompasses the inspection, maintenance, repair, and replacement of components within Allen Bradley SLC RS Logix 500 control systems that are integrated into the SCADA network used across water treatment facilities. The scope of work requires technical expertise in industrial automation systems, ensuring reliable operation of critical infrastructure by addressing hardware failures, software malfunctions, and performance degradation. All activities must align with the operational needs of the water treatment environment, maintaining system integrity and continuity without disrupting water processing operations. This is a subcontract solicitation posted by the California Department of Corrections & Rehabilitation under NAICS code 541330, with a response deadline of July 31, 2026. The place of performance and specific facility locations are not detailed in the contract data, implying the work may be distributed across multiple water treatment sites managed by the agency. Interested parties must submit proposals prior to the deadline, and while no set-aside provisions are specified, bidders should be prepared to demonstrate qualifications in industrial control systems and experience with SCADA-integrated automation platforms.

Engineering Services

POSTED

DEADLINE

GE Fanuc 90-30 PLC & SCADA System Maintenance and CalibrationThe contract entails the performance of preventative maintenance, inspection, calibration, and operational testing of GE Fanuc Series 90-30 programmable logic control systems integrated within the SCADA infrastructure used for water treatment operations. The work requires technical expertise in maintaining legacy industrial control systems to ensure continuous and reliable operation of critical water treatment functions. All activities must be performed in accordance with industry standards to preserve system integrity, accuracy, and safety without disrupting ongoing operations. This subcontract is issued under NAICS code 541330, indicating it falls within the engineering services category, and is managed by the California Department of Corrections & Rehabilitation under the California state agency. The solicitation was posted on July 16, 2026, with a response deadline of July 31, 2026. The place of performance is tied to water treatment facilities under the agency’s purview, though specific location details are not provided. Contractors must be prepared to work within existing SCADA environments, adhere to strict timing and operational constraints, and ensure all calibrated systems meet required performance benchmarks for water treatment reliability and regulatory compliance.

Engineering Services

POSTED

DEADLINE