Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, September 30 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Soffit Repair and Painting

Active

State & Local

Response Deadline10/21/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

General Info

Agency

Oregon State UniversityView Agency

NAICS

238320 - Painting and Wall Covering ContractorsView NAICS

Place of Performance

Not specified

Set-Aside

NONE

Documents

This scope was carved out of RFP 00001338.

The full solicitation package (2 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

Radiation Center Roof | Copy of General Solicitation Posting Template

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedSep 21

subcontract

Response DeadlineOct 21

Submission deadline

Response Deadline

10/21/2026, 05:00:00 PM UTCin 29 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyOregon State University

ContactsNo contacts available

OfficeN/A

Organization / Agency

Oregon State University

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Performs skim coating and painting of water-damaged front entrance soffit areas for prime contractors on Oregon State University facility projects. Applies skim coats to damaged areas and repaints the soffit after the roof overlay is complete. Requires prevailing wage compliance. Delivers a repaired and painted entrance soffit.

Similar Contracts

Same NAICS industry code

Paint All Exterior and Common Area Doors, Buildings 4166, 4167, 4168 & 3673

Solicitation # N400857606105

Solicitation N400857606105 is a task order under MACC N4008525D for the cleaning, preparation, priming, and painting of approximately 800 exterior and common area doors, frames, vents, and louvers, as well as the refinishing of 2,350 linear feet of handrails. The work is located at MCAS Cherry Point, North Carolina, specifically covering Buildings 4166, 4167, 4168, 4169, and 3673. The project requires a professional, durable finish, with specific requirements to paint both sides of common area and mechanical doors, while residential doors are to be painted on the corridor-facing side only. All work must be completed within 180 calendar days after the award. The contract will be awarded based on the lowest price. Bidders must adhere to the Buy American Act and Davis-Bacon Act wage determinations, with a minimum wage of 13.65 per hour for covered workers. Bonding requirements vary by proposal amount: no bonds for 35,000 or less, a payment bond for amounts between 35,000 and 150,000, and a bid, payment, and performance bond for amounts exceeding 150,000. Proposals were due by 1400 local time on September 21, 2026. The contractor is required to provide a Quality Control Manager and maintain liability insurance per FAR 28.307-2 and North Carolina law.

Bristol Alliance of Companies

POSTED

about 12 hours ago

DEADLINE

in about 12 hours

On-Call Interior Painting

DAS Procurement

POSTED

about 15 hours ago

DEADLINE

Painting Projects

Solicitation # BID #2027-09

The Town of Stratford is soliciting bids for BID #2027-09 to provide on-call interior and exterior painting services for town buildings and public school facilities. The contract is for an initial 12-month term with the possibility of renewal upon 60 days' written notice. The scope of work includes interior and exterior painting, transparent finishes for wood doors, window re-glazing, and lead paint abatement. Individual projects under this contract are capped at 100,000 dollars. The award will be granted to the lowest responsible bidder, with the town reserving the right to award to multiple bidders based on cost, scheduling availability, and the range of services offered. Qualified bidders must demonstrate at least five years of industry experience, maintain a local facility, and provide three references from comparable projects completed within the last three years. Submissions must be delivered in a sealed envelope clearly marked with the bid number and include a signed cover page, a list of subcontractors with hourly rates, and a notarized non-collusion affidavit. All work must comply with federal and state OSHA standards and include a minimum one-year guarantee against defective materials and workmanship. The town may retain 5 percent of the total bid amount for 90 days following final acceptance of the work.

DAS Procurement

POSTED

about 15 hours ago

DEADLINE

Exterior Penetration Sealing and WeatherproofingThis subcontract for Exterior Penetration Sealing and Weatherproofing involves providing specialized sealing services for structural penetrations at County Sheriff's Office radio sites. The contractor is responsible for securing wall, roof, and junction box penetrations using industrial sealants, waterproof flashing, and UV-resistant coatings to ensure all exterior cable entries are protected from water and environmental damage. The primary objective is to deliver water-tight seals at all penetration points in accordance with manufacturer recommendations. The project is associated with the California Sheriff's Office under NAICS code 238320. The solicitation was posted on September 22, 2026, with a response deadline of November 19, 2026.

Sheriff's Office

POSTED

about 21 hours ago

DEADLINE

in about 2 months

Residential Painting Services

City of Rocky Mount

POSTED

about 23 hours ago

DEADLINE

Interior Finishes (Flooring & Walls)This subcontract for Interior Finishes (Flooring and Walls) involves the supply and installation of specialized healthcare finishes for projects at the New York State Rockland Psychiatric Center. The scope of work includes the installation of seamless sheet vinyl flooring, antimicrobial wall coverings, and ceiling tiles, as well as painting services. Contractors must possess specific experience with hospital-grade materials and seamless installation techniques designed to prevent bacterial growth and ensure the delivery of high-quality finished interior surfaces. The opportunity was posted on September 22, 2026, with a response deadline of October 2, 2026. Falling under NAICS code 238320, this contract is managed by the state of New York and is intended for providers capable of meeting the rigorous sanitary and material standards required for psychiatric healthcare facilities.

POSTED

DEADLINE

Interior Finishes (Flooring & Painting)This subcontract for Interior Finishes focuses on the delivery of finished interior surfaces for construction projects located in Rochester, New York. The scope of work involves performing interior painting and the installation of various flooring materials, specifically including tile, carpet, and resilient flooring, while operating as a subcontractor for prime contractors. The project is categorized under NAICS code 238320 and is managed by the state of New York. Interested parties must note the tight turnaround for the solicitation, which was posted on September 22, 2026, with a response deadline of September 25, 2026.

POSTED

DEADLINE

Painting of Decorative Acorn Light Poles at Various Locations in the City of Utica

Solicitation # 2139195

The City of Utica in New York is soliciting bids for the painting of decorative acorn light poles at various locations throughout the city. This procurement opportunity, identified by solicitation number 2139195, was posted on September 22, 2026, with a response deadline of October 15, 2026. The contract includes specific minority and women business enterprise goals, requiring a 10 percent MBE goal and a 2 percent WBE goal. Interested parties should direct inquiries and submissions to Eugene Santa Croce III or Michael Mustard. No other business enterprises have been awarded identical or substantially similar contracts within the past five years.

POSTED

DEADLINE

Interior Wood Door Staining and Finishing

Health and Human Services Commission

POSTED

DEADLINE

Interior Painting and Surface Preparation Services

Health and Human Services Commission

POSTED

DEADLINE

Dormitory Interior Painting San Antonio State Supported Living Center Building 674

Solicitation # HHS0017699

The Texas Health and Human Services Commission is seeking competitive bids for interior painting services for Building 674 at the San Antonio State Supported Living Center. The project involves surface preparation, priming, and finish coats, requiring the contractor to maintain a qualified crew and supervisor to ensure quality control while minimizing interruptions to residents in the occupied facility. Technical specifications require a total dry film thickness of at least 2.5 MDF, a maximum VOC of 150g/L, and an H pencil hardness. All materials must be delivered in original manufacturer packaging with clear identification. Bidders must attend one of two mandatory on-site visits on September 24 or 25, 2026, to avoid disqualification. Responses are due by October 6, 2026, and can be submitted via email or the HHS Online Bid Room. The award will be based on best value, considering price, ability to meet performance delivery requirements, and demonstrated experience. Contractors must provide an all-inclusive price and meet strict insurance requirements, including workers' compensation and employer's liability of $1,000,000. Performance is expected Monday through Friday, with standard service call responses within four hours and emergency responses within one hour.

Health and Human Services Commission

POSTED

DEADLINE

Drywall and PaintingThis subcontract opportunity with the City of Rome, Georgia, involves providing specialized drywall and painting services for Water Department renovation projects. The selected contractor will be responsible for performing wall repairs, installing and finishing moisture-resistant green board drywall, and applying commercial-grade antimicrobial low-VOC paint to walls and ceilings. Eligible bidders must hold a general painting and drywall contractor license. The solicitation was posted on September 21, 2026, with a response deadline of October 22, 2026. The project falls under NAICS code 238320 and requires the delivery of fully finished and painted surfaces.

POSTED

DEADLINE

More opportunities from Oregon State University

Same awarding agency

Roof Core Sampling and Leak Investigation

Surveying and Mapping (except Geophysical) Services

POSTED

DEADLINE

Roofing System Materials Supply

Other Building Material Dealers

POSTED

DEADLINE

Roof Overlay and Installation

Roofing Contractors

POSTED

DEADLINE

Roof System Design and Permitting

Architectural Services

POSTED

DEADLINE

Radiation Center Roof | Copy of General Solicitation Posting Template

Solicitation # RFP 00001338

Oregon State University is seeking a Design-Build contractor for RFP 00001338 to perform a roof overlay of approximately 38,500 square feet at the Radiation Center in Corvallis, Oregon. The project requires the removal of existing rock ballast and the installation of 1/4-5/8 inch new sub deck material followed by a fire-rated EPDM fleeceback roof system, with a minimum thickness of 90 mils and a preference for 145 mils. The objective is to ensure a minimum 15-year extended roof life with a target expectancy of 40 years. Key deliverables include a core sample survey to confirm insulation viability, the repair or replacement of the reactor bay roof hatch, and the installation of roof tie-off points for fall and swing protection. The project must adhere to OSU Design and Construction Standards and Oregon Prevailing Wage Law, with a target substantial completion date of September 15, 2027. The anticipated budget for the work is approximately 3.8 million dollars. Proposals must be submitted via the OSU Workday Posting Portal by October 21, 2026, at 10:00 am PT. Applicants must hold a valid Oregon Construction Contractors Board license and submit a proposal narrative not exceeding 20 pages, with pricing submitted as a separate document. Evaluation will be based on a weighted scoring system of non-price criteria followed by a price evaluation. Due to the nature of the facility, the contractor must coordinate work around an occupied building and manage high-risk factors, as water infiltration could lead to radioactive contamination or explosions.

Roofing Contractors

POSTED

DEADLINE

Buoyancy Engine I Procurement Service I SOLE SOURCE

Solicitation # oregon-state-university-1295138

Oregon State University is seeking to procure buoyancy engines for its underwater Slocum electric gliders from Teledyne Webb Research. This is a sole source procurement because Teledyne Webb Research is the only manufacturer and distributor capable of providing engines that meet the specific compatibility requirements of the university's existing equipment, specifically requiring a 200-meter capable change in buoyancy. The solicitation, identified by number oregon-state-university-1295138, was posted on September 18, 2026, with a response deadline of September 25, 2026. Entities wishing to challenge this sole source determination must submit their objections via email to Cassandra Hurd by the specified closing date.

Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

POSTED

DEADLINE

Four Component Net Radiometers I Procurement Services I SOLE SOURCE

Solicitation # oregon-state-university-1295134

Oregon State University is seeking to procure eight four-component net radiometers from Apogee through a sole source contract. The university requires these instruments to measure incoming and outgoing shortwave and longwave radiation to quantify surface energy balance and evaluate ET measurements across network sites. The SN-500 model was selected because it is the only available instrument that meets all critical technical specifications, including native SDI-12 digital output, onboard A/D conversion, individually heated sensing elements, and low power consumption suitable for remote solar operation. These specific features ensure compatibility with existing Campbell Scientific data acquisition systems and 12-V solar-powered field stations without requiring additional hardware or analog channels. The procurement aims to maintain consistency in programming, maintenance, and data comparability across all eight sites. Interested parties may challenge this sole source determination by contacting Cassandra Hurd via email before the response deadline of September 25, 2026.

Other Measuring and Controlling Device Manufacturing

POSTED

DEADLINE

EchoONE Airborne LiDAR System for Survey-Grade Mapping|Sole Source|Procurement

Solicitation # oregon-state-university-1295041

Oregon State University is seeking to procure an EchoONE Airborne LiDAR System from VIAVI Solutions through a sole source contract due to the unique technical specifications required for survey-grade mapping. The system must deliver high-precision performance, including 10 mm range accuracy, 5 mm precision, and 1.5 cm RMSEz vertical accuracy, while supporting dual pulse repetition frequencies and providing up to eight returns per pulse for dense vegetation modeling. It must also feature a 90-degree field of view and a tactical-grade GNSS/INS system compatible with multiple satellite constellations for RTK and PPK workflows. To ensure compatibility with existing equipment, the system must weigh 1.65 kg or less and integrate natively with the Freefly Smart Dovetail mounting interface. This procurement, identified by solicitation number oregon-state-university-1295041, allows for challenges to the sole source determination until the response deadline of September 23, 2026. All inquiries and challenges should be directed to Hannah Punches via email.

Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

POSTED

DEADLINE

in about 18 hours

Automated Zebrafish Egg Microinjection System|Sole Source|Procurement

Solicitation # oregon-state-university-1295040

Oregon State University is seeking a sole source contract with Objective Biotechnology for an automated zebrafish egg microinjection system. This procurement is based on the unique design and capabilities of the system, which is required to meet specific research standards for SARL. Key technical requirements include the use of computer vision and machine learning for embryo identification, a throughput of at least 300 injections per hour, a miss rate under 10 percent, and an egg damage rate below 5 percent. The system must also automatically remove damaged or uninjected eggs and provide manufacturer-supplied needles. The solicitation, identified by number oregon-state-university-1295040, was posted on September 16, 2026, with a response deadline of September 23, 2026. Interested entities wishing to challenge the sole source determination must submit their objections via email to Hannah Punches by the closing date.

Analytical Laboratory Instrument Manufacturing

POSTED

DEADLINE

in about 18 hours

SeaBird Scientific Instrument Service and Calibration|Sole Source|Procurement

Solicitation # oregon-state-university-1295039

Oregon State University is seeking a sole source contract with SeaBird Scientific for the maintenance and calibration of proprietary instruments. This procurement is based on the fact that SeaBird Scientific is the only provider with the necessary intellectual property, technical knowledge, software, and calibration procedures required to ensure the continued operation and data quality of their manufactured equipment. The solicitation, identified by number oregon-state-university-1295039, was posted on September 16, 2026. Any entity wishing to challenge this sole source determination must submit their objection to Hannah Punches via email by the response deadline of September 23, 2026.

Electronic and Precision Equipment Repair and Maintenance

POSTED

DEADLINE

in about 18 hours

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS