Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

This Government Contract opportunity from Government of Canada was posted on May 19, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Technical Documentation & Compliance Support

Closed
International

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 541330
New
DIBBS
Quality Assurance & Inspection ServicesThe Department of Defense, specifically the ASC Commodities Division, is seeking a subcontractor for Quality Assurance and Inspection Services to be performed at Robins Air Force Base. The primary scope of work involves conducting origin inspections and quality sampling in accordance with MIL-STD-1916 or ASQ H1331 standards, as well as the preparation of Certificate of Quality Conformance and government acceptance documentation. This opportunity is categorized under NAICS code 541330. The solicitation was posted on August 17, 2026, with a response deadline of August 25, 2026. Interested parties can find further details through the provided DIBBS link.
ASC COMMODITIES DIVISION

POSTED

1 day ago

DEADLINE

in 7 days
NAICS: 541330
New
DIBBS
Quality Certification and Documentation ManagementThis subcontract with the Defense Logistics Agency under the Department of Defense focuses on Quality Certification and Documentation Management. The primary objective is the preparation and submission of the Certificate of Quality Compliance in accordance with CDRL-METALSCERT-26033, alongside the diligent maintenance of all required CDRL records. The contractor is responsible for ensuring that all deliverables strictly adhere to ASTM, SAE, and QAP standards. Classified under NAICS code 541330, this agreement emphasizes rigorous quality assurance and regulatory compliance to meet the specific technical requirements of the agency.
Defense Logistics Agency

POSTED

1 day ago

DEADLINE

N/A
NAICS: 541330
New
DIBBS
Defense Logistics Inspection and Acceptance SupportThis subcontract, titled Defense Logistics Inspection and Acceptance Support, is issued by the Defense Logistics Agency under the Department of Defense. The primary objective of the agreement is to provide on-site quality inspection, verification, and acceptance of defense components at HCL Logistics Inc. to ensure all items comply with specific contract enclosures and rigorous DoD standards. The project falls under NAICS code 541330 and was posted on August 17, 2026. The scope of work focuses on maintaining quality assurance and regulatory compliance for critical defense components through professional inspection and verification services.
Defense Logistics Agency

POSTED

1 day ago

DEADLINE

N/A
NAICS: 541330
New
DIBBS
Inspection and Acceptance Services at OriginThis subcontract, issued by the Defense Logistics Agency under the Department of Defense, entails the performance of third-party inspection and acceptance services for defense components. The work is to be conducted at the GDLS-C facility located in London, Ontario, ensuring that all components meet specific military standards. The contract is categorized under NAICS code 541330 and was posted on August 17, 2026. It focuses on quality assurance and verification at the point of origin to ensure compliance with defense specifications before the components are accepted.
Defense Logistics Agency

POSTED

1 day ago

DEADLINE

N/A
NAICS: 541330
New
DIBBS
Quality Inspection and Origin Acceptance ServicesThis subcontract, issued by the Defense Logistics Agency under the Department of Defense, provides for quality inspection and origin acceptance services for visor units. The scope of work involves performing third-party inspections and acceptance procedures at the point of origin, adhering strictly to FAR 52.246-2 and established military quality sampling standards to ensure all units meet specified requirements before shipment. Classified under NAICS code 541330, the agreement focuses on professional engineering and technical inspection services. The contract is managed through the Defense Logistics Agency and is identified by the award record SPE7LX26D60LZ.
Defense Logistics Agency

POSTED

1 day ago

DEADLINE

N/A
NAICS: 541330
New
DIBBS
First Article Testing (FAT) Services for Canopy Edge StripThis subcontract involves the execution of First Article Testing for a canopy edge strip under the Department of Defense, specifically the ASC Supplier Oper AE and AF Div. The scope of work requires the contractor to manage test planning, create necessary documentation, and submit final results to ensure the component meets all design and quality compliance standards. The project is categorized under NAICS code 541330 and will be performed in Enid, Oklahoma. Interested parties must respond by August 25, 2026, following the posting date of August 17, 2026.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

1 day ago

DEADLINE

in 7 days
NAICS: 541330
New
DIBBS
Technical Data and Product Item Description (PID) DevelopmentThis subcontract with the Defense Logistics Agency under the Department of Defense focuses on the development and maintenance of Product Item Descriptions for National Stock Number items. The primary objective is to establish precise technical specifications, packaging requirements, preservation methods, and marking standards to ensure full compliance with military regulations. Classified under NAICS code 541330, the project involves specialized engineering and technical services to maintain the integrity of product data. The contract was posted on August 17, 2026, and is managed through the Defense Logistics Agency to support the standardization of military equipment and supplies.
Defense Logistics Agency

POSTED

1 day ago

DEADLINE

N/A
NAICS: 541330
New
DIBBS
Quality Inspection and Destination Acceptance SupportThis subcontract with the Defense Logistics Agency focuses on providing post-delivery technical and quality support to ensure proper inspection and acceptance at various DLA destinations. The scope of work includes managing essential documentation, maintaining traceability, and resolving any non-conformances that arise during the acceptance process. Classified under NAICS code 541330, the agreement is managed by the Department of Defense to maintain quality standards for delivered goods. The contract is designed to streamline the transition from delivery to final acceptance through specialized technical oversight and quality assurance support.
Defense Logistics Agency

POSTED

1 day ago

DEADLINE

N/A
NAICS: 541330
New
DIBBS
Quality Assurance and Inspection Services for Defense DeliveriesThe Quality Assurance and Inspection Services for Defense Deliveries subcontract, issued by the Department of Defense ASC Commodities Division, requires the performance of quality assurance sampling and inspection to ensure zero non-conformances in delivered defense components. All services must be executed in accordance with MIL-STD-1916 or ASQ H1331 standards. This opportunity is categorized under NAICS code 541330 and is to be performed in FPO, zip code 96694. The solicitation was posted on August 17, 2026, with a response deadline of August 25, 2026.
ASC COMMODITIES DIVISION

POSTED

1 day ago

DEADLINE

in 7 days
NAICS: 541330
New
DIBBS
Quality Assurance and Inspection ServicesThe Department of Defense, through the ASC Commodities Division, is seeking a subcontractor to provide quality assurance and inspection services for pressure gauges. The primary scope of work involves performing incoming inspections and quality verification utilizing defined AQL levels in accordance with MIL-STD-1916 or ASQ H1331 sampling plans. This opportunity is categorized under NAICS code 541330 and will be performed at FPO 96667. Interested parties must submit their responses by the deadline of August 25, 2026.
ASC COMMODITIES DIVISION

POSTED

1 day ago

DEADLINE

in 7 days
NAICS: 541330
New
DIBBS
Quality Assurance and Inspection ServicesThis subcontract, titled Quality Assurance and Inspection Services, is issued by the Defense Logistics Agency under the Department of Defense. The primary objective of the agreement is to provide third-party sampling and inspection services to ensure valve quality and strict adherence to contract compliance, utilizing standards such as MIL-STD-1916 or ASQ Z1.4. The contract is categorized under NAICS code 541330 and was posted on August 17, 2026. It focuses on maintaining rigorous quality control measures for valve components to meet the specific technical requirements of the agency.
Defense Logistics Agency

POSTED

1 day ago

DEADLINE

N/A
NAICS: 541330
New
DIBBS
Quality Assurance & Inspection ServicesThe ASC Commodities Division of the Department of Defense is seeking a subcontractor for Quality Assurance and Inspection Services to be performed in New Cumberland, Pennsylvania. The primary objective of this contract is to provide third-party inspection services to validate that products conform to MIL-STD-1916 and ASQ Z1.4 sampling plans, with a strict requirement for zero non-conformances. This opportunity falls under NAICS code 541330 and was posted on August 17, 2026. Interested parties must submit their responses by the deadline of August 25, 2026.
ASC COMMODITIES DIVISION

POSTED

1 day ago

DEADLINE

in 7 days

AI Contract Overview

Show more

The contract titled Technical Documentation & Compliance Support requires the preparation and validation of technical compliance documentation essential for government acceptance, with a focus on ensuring that substitute products meet required standards through detailed equivalency justification. This includes managing calibration certificates and maintaining comprehensive traceability documentation to demonstrate adherence to technical specifications and regulatory requirements. The work is tied to the Department of National Defence, Government of Canada, and performance is expected to occur within the National Capital Region. The solicitation is classified as a subcontract under NAICS code 541330, which pertains to professional, scientific, and technical services. The opportunity was posted on May 19, 2026, with responses due by June 3, 2026, and participation is open without specific set-aside status. All deliverables must be aligned with Canadian government procurement standards and support official acceptance processes.

General Info

Provide technical documentation and compliance support to Department of National Defence in National Capital Region.

Agency

Government of Canada → Department of National DefenceView Agency

NAICS

541330 - Engineering ServicesView NAICS

Place of Performance

Canada, National Capital Region (NCR), CAN

Set-Aside

NONE

Documents

This scope was carved out of W8486-270853/A .

The full solicitation package (2 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

Rohde and Schwarz ESW 44 EMI Test Receiver

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PhaseClosed
Posted

subcontract

Response Deadline

Deadline has passed

Submission Closed

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

Show more
AgencyGovernment of Canada → Department of National Defence
ContactsNo contacts available
OfficeN/A
Organization / Agency
Government of Canada → Department of National Defence
View Agency Profile
Office AddressN/A
ContactsNo contact information available

Full Description

Show more
Preparation and validation of technical compliance documentation, including equivalency justification for substitute products, calibration certificate management, and traceability documentation for government acceptance.

More opportunities from Government of Canada → Department of National Defence

Same awarding agency

NAICS: 484121
New
International
Logistics and Delivery ServicesThis subcontract for Logistics and Delivery Services, issued by the Department of National Defence for the Government of Canada, involves the transportation and delivery of milling machines to a location in Ontario. The scope of work includes the crating, handling, and necessary coordination with the installation team to ensure the equipment is delivered and positioned correctly. The opportunity was posted on August 17, 2026, with a response deadline of September 4, 2026. Classified under NAICS code 484121, the contract focuses on specialized freight transportation and logistics within Ontario, excluding the National Capital Region.
General Freight Trucking, Long-Distance, Truckload

POSTED

2 days ago

DEADLINE

in 16 days
View Details
NAICS: 611430
New
International
Technical Documentation and Training ServicesThis subcontract with the Government of Canada's Department of National Defence involves the development of technical manuals and the delivery of operator and maintenance training for personnel on milling machine operations. The work is categorized under NAICS code 611430 and is to be performed in Ontario, excluding the National Capital Region. The opportunity was posted on August 17, 2026, with a response deadline of September 4, 2026. Interested parties can find further details through the CanadaBuys tender notice system.
Professional and Management Development Training

POSTED

2 days ago

DEADLINE

in 16 days
View Details
NAICS: 811211
New
International
Installation of Milling MachinesThis subcontract involves the on-site installation, alignment, calibration, and commissioning of five milling machines for the Department of National Defence. The work is to be performed at a facility located in Ontario, outside of the National Capital Region. The solicitation was posted on August 17, 2026, with a response deadline of September 4, 2026. The project falls under NAICS code 811211 and is managed by the Government of Canada.
Consumer Electronics Repair and Maintenance

POSTED

2 days ago

DEADLINE

in 16 days
View Details
NAICS: 333515
New
International
Supply of Milling MachinesThe Department of National Defence for the Government of Canada is seeking a subcontractor for the procurement and delivery of five industrial milling machines. The equipment must strictly adhere to provided technical specifications and meet specific Canadian content requirements. The solicitation was posted on August 17, 2026, with a response deadline of September 4, 2026. The project falls under NAICS code 333515 and the place of performance is designated as Ontario, excluding the National Capital Region.
Cutting Tool and Machine Tool Accessory Manufacturing

POSTED

2 days ago

DEADLINE

in 16 days
View Details
NAICS: 336411
New
International
Uncrewed Aircraft System - Light
Solicitation # W8703-270009/A
The Department of National Defence is soliciting a General Purpose Uncrewed Aircraft System (GPUAS) for light land forces, with the requirement to deliver a minimum of 80 systems by March 1, 2027, to 7 CF Supply Depot in Edmonton, Alberta. The system must support a broad spectrum of military operations including Intelligence, Surveillance, and Reconnaissance (ISR), force protection, targeting, strike missions, situational awareness, and training. Key technical specifications include a maximum take-off weight of 5 kg or less, an endurance of at least 30 minutes with an electro-optical/infrared payload, a dash speed exceeding 55 km/h, and a service ceiling of at least 8,000 feet ASL, all measured under ISA conditions. The system must comply with Canadian and international standards including ISO 2533:1975, DND and CF airworthiness directives, and must incorporate cybersecurity measures such as secure boot, authenticated software, no external kill switches, no undocumented data exfiltration pathways, and prohibit critical components manufactured in adversary nations, including flight controllers, radios, cameras, and ground control stations. The procurement follows a Phase Bid Compliance Process and is restricted to Canadian Suppliers who meet stringent eligibility criteria, including a permanent place of business in Canada, tax registration, and employment of Canadian personnel. Bidders are required to complete the Canadian Content Attestation Form to quantify Canadian Value-Added, which accounts for 25% of the award evaluation, alongside Technical Merit (50%) and Price-per-Unit (25%). The highest combined score determines award selection, with ties broken by the highest Canadian Value-Added score. All submissions must be in English or French and sent exclusively via email to tanya.mckenzie@forces.gc.ca by August 25, 2026. Bidders must structure proposals into three sections: Technical Offer, Financial Offer, and Offer Submission Forms, including mandated documents such as the Offeror Declaration and Canadian Content Attestation. Delivery must be made Delivered Duty Paid under Incoterms 2020 to the specified Edmonton location, with packaging adhering to environmentally preferred standards, ISPM 15 wood packaging rules, and controlled goods marking requirements. The contract is governed by the Defence Protections Act and includes warranty terms of 12 months post-acceptance, 30-day payment terms after invoice receipt, and potential late payment interest at the average rate plus 3
Aircraft Manufacturing

POSTED

2 days ago

DEADLINE

in 7 days
View Details
NAICS: 333515
New
International
RCEMES Milling Machines
Solicitation # W2037-26-0076/A
The Department of National Defence is seeking the purchase of milling machines under solicitation number W2037-26-0076/A. This federal requirement is subject to a preference for Canadian goods and services, with the place of performance located in Ontario, excluding the National Capital Region. The procurement process is managed by contracting authority Aaron Pound. Interested parties must submit their responses by the deadline of September 4, 2026. Submissions are accepted in either of Canada's official languages, and the government retains the right to negotiate with suppliers throughout the procurement process.
Cutting Tool and Machine Tool Accessory Manufacturing

POSTED

2 days ago

DEADLINE

in 16 days
View Details
NAICS: 335311
New
International
1250 kVA Shore Power Autotransformer for CCG AOPS
Solicitation # RFQ-CCG-AOPS-2026-001
The Department of National Defence, on behalf of the Canadian Coast Guard, is seeking quotes for the design, manufacture, testing, and delivery of one 1250 kVA three-phase autotransformer. The equipment is required to convert 450 VAC primary shore power from Department of National Defence facilities to 600 VAC secondary power for Arctic and Offshore Patrol Ships. The unit must be copper-wound with Class 220 insulation, an impedance of less than 4 percent, and a CSA Type 3R enclosure finished in ANSI 61 grey. A critical requirement is that the transformer must fit within an ISO 668 Type 1C 20-foot freight container and not exceed a maximum weight of 8,000 kg to ensure compatibility with shipboard crane lifting capacities. The selected contractor must maintain an ISO 9001 certified Quality Management System and perform Factory Acceptance Testing at an ISO/IEC 17025 certified facility. Deliverables include the autotransformer and a comprehensive electronic PDF documentation package containing FAT reports, electrical schematics, arrangement drawings, and operation and maintenance manuals. Delivery is required within 14 weeks of contract award to the NC5 Jetty in Halifax, Nova Scotia, under Delivered Duty Paid terms. This request for quote is issued for planning and estimation purposes and does not constitute a formal offer or guarantee of a contract award.
Power, Distribution, and Specialty Transformer Manufacturing

POSTED

2 days ago

DEADLINE

in 10 days
View Details
NAICS: 335220
New
International
Washing and Drying Machines
Solicitation # W0501-27-M011/A
The Department of National Defence is soliciting bids for the procurement of laundry equipment to support live-in military personnel at 5 CDSB Gagetown. The requirement consists of 10 front-load washing machines, 15 top-load washing machines, 16 gas drying machines, and 20 electric drying machines. All units must feature stainless steel components, front-facing controls, and specific capacity and dimension requirements, with a minimum one-year warranty for parts and labour. The contract is awarded to the compliant offer with the lowest evaluated price, based on a pass/fail assessment of mandatory technical criteria. The successful contractor must deliver the equipment Delivered Duty Paid to the Building H7 warehouse in Oromocto, New Brunswick, by March 31, 2027. All shipments must adhere to environmentally preferable packaging specifications, requiring materials to be reusable, returnable, or recyclable. Payment will be made on a fixed-price basis, with undisputed invoices paid within 30 days. The contract period runs from the date of award through March 31, 2027, and is managed by Contracting Authority Ann Marie MacDonald.
Major Household Appliance Manufacturing

POSTED

3 days ago

DEADLINE

in 14 days
View Details
NAICS: 337215
New
International
Static Shelving System
Solicitation # W0501-27-M040/A
The Department of National Defence is soliciting a firm fixed price contract for the supply, delivery, and installation of a modular static shelving system for the 5th Canadian Division Support Base Gagetown Personnel Support Services in Oromocto, New Brunswick. The required system totals 67.5 feet and consists of six specific sections ranging from 2 to 12 feet. Each section must feature nine open-face levels, two movable dividers per level, retractable work shelves, full perimeter panels, and hinged locking doors with padlock attachment points. All materials must be new and defect-free, with a final delivery and installation deadline of March 31, 2027. The procurement process utilizes a pass/fail technical evaluation based on mandatory criteria M1 through M11, followed by a financial evaluation in Canadian dollars. Delivery is required on a Delivered Duty Paid (DDP) Incoterms 2020 basis to Building J7, Room B234. The contract emphasizes environmental sustainability, requiring reusable, returnable, or recyclable packaging. While there are no specific security clearance requirements, the contractor must maintain accounting records for seven years post-payment and adhere to Canada's Code of Conduct for suppliers. Proposals must be submitted electronically to the contracting authority, Ann Marie MacDonald, by the specified deadline.
Showcase, Partition, Shelving, and Locker Manufacturing

POSTED

3 days ago

DEADLINE

in 9 days
View Details
NAICS: 332992
New
International
Cartridge, 9mm Luger JHP Ammunition
Solicitation # W8486-260493/A
Canada is soliciting the procurement of 9mm Luger Jacketed Hollow Point (JHP) ammunition for use by domestic law enforcement personnel through a firm requirement of 1,200,000 cartridges to be delivered to CFAD Dundurn, Saskatchewan, and 600,000 cartridges to CFAD Angus, Ontario, no later than July 1, 2027. An optional quantity of up to 2,400,000 additional cartridges may be ordered in two separate optional delivery windows: 720,000 to Dundurn and 480,000 to Angus between September and December 2029, and another 720,000 to Dundurn and 480,000 to Angus between September and December 2031. All ammunition must be new production, less than 12 months old at delivery, and conform to strict technical specifications including a maximum power factor of 150, minimum projectile penetration of 30.48 cm, and minimum expansion diameter of 0.560 inches. The ammunition must comply with SAAMI Z299.4-2015, CIP, and AEP-97 M-CMOPI standards, and be packaged in UN-certified reusable metal containers compliant with STANAG 4280, with each container not exceeding 23 kg gross weight. Packaging must also meet ISPM 15 wood treatment standards, and all items must be properly labeled with UN shipping information, NATO Stock Numbers, lot identifiers, and explosive hazard labels per U.N. Model Regulations. The contract operates under a Delivered Duty Paid (DDP) term, requiring the contractor to bear all costs and risks until delivery at the designated Canadian Forces Ammunition Depots. Technical compliance is mandatory and evaluated on a pass/fail basis with no weighting; award will follow the Lowest Evaluated Price with Mandatory Technical Criteria (LPTA) method. Contractors must be eligible under Canadian procurement policies, including compliance with the Controlled Goods Program, and must certify absence of forced labor, adherence to international sanctions, and alignment with ISO 9001:2015 quality management systems. All documentation must be submitted electronically by August 20, 2026, to Trevor.Clark@forces.gc.ca, and invoices must be sent electronically to ContractAdmin.DQA@forces.gc.ca with required accounting
Small Arms Ammunition Manufacturing

POSTED

3 days ago

DEADLINE

in 2 days
View Details
NAICS: 493190
New
International
Logistics and Integrated Packaging ServicesThe Department of National Defence of the Government of Canada is seeking a subcontractor for Logistics and Integrated Packaging Services under NAICS code 493190. This contract involves the coordination of factory-integrated packaging for cylinders and crates, ensuring secure loading and the application of bilingual labeling. The scope of work includes all necessary shipment preparations required for delivery to the Montreal CFS Depot. The opportunity was posted on August 15, 2026, with a response deadline of August 31, 2026. Performance of these services will take place within Canada. Interested parties can find further details through the CanadaBuys procurement portal.
Other Warehousing and Storage

POSTED

4 days ago

DEADLINE

in 13 days
View Details
NAICS: 541380
New
International
Oxygen-Cleaning and Certification ServicesThe Department of National Defence of the Government of Canada is seeking a subcontractor to provide oxygen-cleaning and certification services. This contract focuses on the third-party verification of oxygen-clean manufacturing processes to ensure compliance with CGA G-4.1 and MIL-STD-1330E standards. The scope of work includes conducting audits, performing cleaning validation, and delivering certification reporting. The opportunity was posted on August 15, 2026, with a response deadline of August 31, 2026. The services will be performed within Canada under NAICS code 541380. Interested parties can find further details through the CanadaBuys portal.
Testing Laboratories and Services

POSTED

4 days ago

DEADLINE

in 13 days
View Details