This Government Contract opportunity from Government of Canada was posted on June 18, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

Trailer Towing and Hitch System Supply

Closed

International

Submission Closed07/28/2026, 07:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

Solicitation # SPE7L1-26-T-915B

The contract pertains to the procurement of two piston, valve units with NSN 2530-01-477-3206, supplied by GROVE U.S. LLC under solicitation SPE7L1-26-T-915B. Delivery is required within five days of order placement, FOB origin, with no tolerance for quantity variance. Inspections and acceptance occur at the destination, and all packaging must comply with DLA’s Master List of Technical and Quality Requirements, specifically adhering to RP001 packaging standards. Materials must be packaged per ASTM D3951 if non-hazardous or per TQ requirement IP025 if hazardous under FED-STD-313, with labeling fully conforming to MIL-STD-129. Ozone-depleting chemicals are strictly prohibited, and any substitute chemicals require prior approval unless explicitly authorized by the specification. Palletization and unit packaging must follow the mandated QUP and UI specifications, with shipments sent via traceable freight methods excluding parcel post to the designated delivery point in Conneaut Lake, PA. The contract mandates strict compliance with all DLA technical directives, which override any conflicting commercial standards. The contract is effective for response submission until August 17, 2026, with an original required delivery date of August 4, 2026.

POSTED

DEADLINE

VALVE, RELAY, AIR PRESSU

Solicitation # SPE7L4-26-T-5984

This contract covers the procurement of a valve, relay, air pressure, identified by NSN 2530-01-470-5919, with a required quantity of three units to be delivered within 20 days of award. The item must strictly conform to the source-controlled drawing specification SPE7L4-26-T-5984 and the referenced technical drawing revision D dated 11/21/2023, with part number 12422042, and is supplied exclusively by WABCO USA LLC under part number 472 195 017 0. Manufacturing requires a metal casting process and compliant tooling, with all components subject to source control and no deviations permitted without formal approval. The contract mandates adherence to DLA packaging standards MIL-STD-2073-1E and MIL-STD-129, with special marking code ZZ, palletization compliant with DLA requirements, and shipment via traceable freight only—parcel post is prohibited. Delivery is FOB origin to Fort Sill, Oklahoma, with inspection and acceptance occurring at the destination. The item is classified as a critical application and must not contain ozone-depleting chemicals, mercury or mercury-containing compounds except under strictly defined exceptions, and must comply with all applicable technical and quality requirements referenced in the DLA Master List. All offers require certification of conformance unless waived by a quality assurance letter, and configuration changes must follow formal engineering change proposal procedures. The contract includes restricted data provisions and requires compliance with defense information handling protocols.

LSO COMBAT VEHICLES AND ARMAMENT

POSTED

DEADLINE

Supply of Vehicle Panel Housing UnitsThe contract is for the manufacture and delivery of a single HOUSING, PANEL, VEHIC unit that must fully comply with all Department of Defense technical Specifications, packaging requirements, and hazardous materials standards. The item is classified under NAICS code 336340, indicating it falls within the scope of other transportation equipment manufacturing, and is being procured under a subcontract arrangement through the Land Supply Chain organization of the Department of Defense. Performance of the work is designated to occur at an FPO location with a zip code of 96694-7100, and all deliverables must meet stringent military-grade quality and safety protocols. The solicitation was posted on August 3, 2026, with a firm response deadline of August 14, 2026, requiring vendors to submit proposals within this narrow window to be considered. The full details and submission portal are accessible via the DIBBS system using the provided link for contractors seeking to respond.

POSTED

DEADLINE

Supply of 'Rod, Hood, Vehicular' (Hazardous Material)The contract entails the manufacture or supply of 37 annual units of a vehicular hood rod classified as hazardous material, with strict requirements for compliant packaging, labeling, and comprehensive safety documentation to ensure safe handling and transportation. The item falls under NAICS code 336340, indicating its classification within the automotive component manufacturing sector, and is being procured as a subcontract by the Strategic Acq Program Directorate under the Department of Defense. All deliverables must meet federal hazardous materials regulations, and the supplier is responsible for full adherence to safety and compliance protocols throughout the production and delivery process. The solicitation was posted on August 3, 2026, with a response deadline of August 18, 2026, leaving a narrow window for interested parties to submit proposals. While no set-aside preferences or specific point of contact details are provided, the procurement is tied to a Department of Defense initiative, suggesting potential military or defense vehicle integration. The place of performance and organizational address details are unspecified, but the contract must be fulfilled in accordance with U.S. government standards for hazardous material logistics and documentation. All submissions must be made through the designated DIBBS portal prior to the deadline to be considered.

STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

DEADLINE

Solicitation # SPE7L3-26-T-125B

The contract solicitation SPE7L3-26-T-125B seeks the procurement of SPIDER,BRAKE components identified by NSN 2530015801065, with two line items totaling 27 units—five units under CLIN 0001 and twenty-two under CLIN 0002—delivered FOB origin within 133 days after award, with a required ship date of December 15, 2026, and original delivery due by December 18, 2026. All items must be packaged in strict accordance with MIL-STD-2073-1E, using preservation method 33 (clean/dry), jute cloth cushioning of commercial thickness, unit container E8, and packaging code U, with no preservation or wrapping materials applied. Palletization must comply with DLA’s RP001 requirements, and all markings must follow MIL-STD-129 with no special markings required. Inspection and acceptance occur at the destination, specifically the DLA Distribution Albany facility in Albany, Georgia, or the New Cumberland, Pennsylvania facility depending on the line item, with no tolerance variance in quantity permitted. The contract mandates full compliance with hazardous materials handling protocols under IP025 and 252.223-7001, requiring adherence to OSHA's Hazard Communication Standard for labeling and safety documentation. The solicitation is managed by the Defense Logistics Agency under the Department of Defense, with no set-aside type designated and a NAICS code of 336340 for motor vehicle parts manufacturing. Offerors must submit proposals electronically via DIBBS by the August 6, 2026 deadline and are required to provide their Unique Entity ID and CAGE code, along with full socioeconomic representations including small business, HUBZone, WOSB, SDVOSB, and SDB status where applicable. Affirmative disclosures regarding the provision of covered defense telecommunications equipment trigger additional supplier reporting obligations. Contractual obligations include compliance with FAR and DFARS clauses addressing inspection (52.246-2), changes (52.243-1), cybersecurity safeguards (252.204-7012, 252.240-7997), trafficking in persons, employment eligibility verification, and sustainable procurement. Invoicing is governed by WAW

LAND SUPPLIER OPNS VEHICLE SPT

POSTED

DEADLINE

VALVE, BRAKE PNEUMATIC

Solicitation # SPE7L1-26-U-0542

The contract solicitation SPE7L1-26-U-0542 seeks 165 units of a pneumatic brake valve identified by NSN 2530-01-383-5846, with a required delivery within 75 days of award. This is a total small business set-aside under NAICS code 336340, managed by the Department of Defense’s Land Supply Chain under the Defense Logistics Agency. Contract performance is governed by an indefinite-delivery, indefinite-quantity structure with a maximum value of $350,000 and a guaranteed minimum order of 24 units. The valve must be manufactured per technical specifications aligned with MIL-T-31000, requiring submission of detailed drawings, process/operation sheets, source identification for critical components like castings and forgings, and a shock extension report compliant with MIL-S-901 and DI-ENVR-80706. If reverse engineering is used, a full engineering analysis detailing methodology, sample size, measurements, tolerances, and rationales must be provided. The Haldex part number N30262 is obsolete and replaced by KN20035 RP001, and all packaging must follow MIL-STD-2073-1E with cleaning and drying preservation method 31 and unit container D3. Marking adheres strictly to MIL-STD-129, including Data Matrix barcodes and UDI labels, with hazard communication labels compliant with 29 CFR 1910.1200. Inspection and acceptance are the government’s responsibility at the destination, using inspection criteria from the DLA Master List of Technical and Quality Requirements. Cybersecurity obligations under DFARS 252.204-7012 and NIST SP 800-171 assessment requirements apply, with a deviation for the safeguarding clause. The prohibition on covered defense telecommunications equipment and hexavalent chromium use, whistleblower protections, restrictions on former DoD officials' compensation, and electronic payment submission via WAWF are mandatory. Offerors must hold a valid UEI and CAGE code, certify small business status, and disclose any joint venture partners with their UEI and CAGE codes. Proposals must be submitted electronically through DIBBS by August 18, 2026, and include all technical documentation referenced in the solicitation, with

POSTED

DEADLINE

Supply of Cummins Control Boxes (BEAR Engine)The contract entails the procurement and delivery of three new Cummins Control Boxes, part number A034H205, specifically designed for the BEAR Engine, with each unit required to be verified as being in 'A' condition and covered by the manufacturer’s warranty. The solicitation is structured as a subcontract under a Small Business Set Aside classification, ensuring eligibility and preference for small businesses, and falls under the NAICS code 336340 which pertains to aircraft engine and engine parts manufacturing. The response deadline is August 19, 2026, at 5:30 a.m., with the contract posting date set for August 3, 2026. Performance of the contract is obligated at Hill Air Force Base with a zip code of 84056, indicating the designated location for delivery and potential inspection. The awarding agency is the Department of Defense through the office FA8228 Afsc Ol H Pzim, though no specific point of contact details are provided. The contract is accessible via a public SAM.gov link for additional details, and while no set-aside value or maximum award amount is specified, the classification as a total small business set aside implies the entire opportunity is reserved for qualified small business vendors.

FA8228 Afsc Ol H Pzim

POSTED

DEADLINE

Heavy-Duty Interior Protection Kit SupplyThe contract involves the supply of pre-fabricated heavy-duty interior protection components designed specifically for a Ford F-350 custom work van, including wall liners and scuff plates to safeguard against wear and damage in demanding work environments. The components must meet rigorous durability standards to withstand frequent use, heavy equipment transport, and harsh conditions typical of law enforcement and commercial service applications. The solicitation is classified as a subcontract under NAICS code 336340, indicating it pertains to motor vehicle body manufacturing, and is issued by the Maine State Police / Traffic Safety division under the agency name Maine. The opportunity was posted on August 3, 2026, with a response deadline set for August 18, 2026, allowing potential suppliers a limited window to submit proposals. No set-aside provisions or specific small business preferences are indicated, and no detailed point of contact or physical delivery address is provided in the data, with performance location and organizational details left unspecified. All submissions and inquiries must be directed through the online portal at the provided UI link, and vendors are expected to ensure compliance with technical specifications, delivery timelines, and quality benchmarks without explicit federal procurement oversight beyond the stated classification and timing.

Maine State Police / Traffic Saf

POSTED

DEADLINE

Supply of Solid Rubber TiresThe contract requires the manufacture and supply of seven solid rubber tires that meet strict DLA Master List specifications, including compliance with MIL-STD-129 marking standards and a non-extendable 120-month shelf life. All tires must be produced and delivered in full accordance with these technical and regulatory requirements to ensure suitability for Department of Defense use. The solicitation is classified as a subcontract under a Total Small Business Set-Aside, meaning only small businesses as defined by the SBA are eligible to respond, and the NAICS code 336340 confirms the focus on tire manufacturing for motor vehicles. The opportunity was posted on August 2, 2026, with a firm response deadline of August 13, 2026, and performance is to be delivered to a designated location in New Cumberland, Pennsylvania, with a ZIP code of 17070-5002. The contract is managed under the Land Supplier Operations Vehicle Support organization within the Department of Defense, and all proposals must be submitted via the DIBBS platform using the provided solicitation link to be considered.

LAND SUPPLIER OPNS VEHICLE SPT

POSTED

DEADLINE

Manufacture of Exhaust Manifolds and Similar Engine ComponentsThe contract involves the production of exhaust manifolds and similar engine components that must meet stringent military specifications, requiring advanced precision casting, machining, welding, and comprehensive testing processes. The work is classified under NAICS code 336340, indicating it falls within the aerospace product and parts manufacturing sector, and is structured as a subcontract under the Department of Defense, specifically managed by the Defense Logistics Agency. All components must be manufactured to exacting standards to ensure reliability and performance in defense applications, with no flexibility allowed in material selection, dimensional tolerances, or quality assurance protocols. The contract was posted on August 2, 2026, and while no specific solicitation number or place of performance is provided, the work is intended to support critical defense systems. The subcontract nature suggests it is part of a larger procurement chain, likely fulfilling the needs of a prime contractor working directly with the military. The absence of set-aside details indicates the opportunity is open to any qualified supplier regardless of business size or designation. The contract's success hinges on adherence to military-grade quality control and on-time delivery, with potential consequences for noncompliance due to the mission-critical nature of the components involved.

Defense Logistics Agency

POSTED

DEADLINE

Supply of Brake Disc Rotors (NSN 2530017220317)The contract entails the manufacture or supply of defense-specific brake disc rotors compliant with military specifications and designated by NSN 2530017220317, intended for use in military vehicle systems. The requirement is issued as a subcontract under NAICS code 336340, indicating classification within the automotive component manufacturing sector, and is managed by the Department of Defense through its Land Supplier Operations Vehicle Support organization. Performance of the contract is mandated to occur at the specified location in New Cumberland, Pennsylvania, with a ZIP code of 17070-5002, ensuring alignment with logistical and operational deployment needs. The solicitation was posted on August 2, 2026, with a firm response deadline of August 13, 2026, leaving a twelve-day window for prospective suppliers to submit proposals. Although the solicitation number is not provided, the official reference can be accessed via the DIBBS platform at the published link. The contract does not specify any set-aside provisions, meaning it is open to all qualified vendors without reservation for small businesses or other designated categories. Compliance with military standards and precise dimensional and material requirements for the brake disc rotors is critical, as failure to meet specifications could render the components unusable in operational military vehicles.

LAND SUPPLIER OPNS VEHICLE SPT

POSTED

DEADLINE

Pneumatic Vehicular Tire SupplyThe contract entails the supply of two military-specification pneumatic vehicular tires identified by NSN 2610015434493, manufactured and packaged to meet exacting defense standards for labeling, packaging, and delivery. These tires are intended for use in military vehicle applications and must adhere to all applicable military specifications and quality control requirements to ensure operational readiness and durability under demanding conditions. The procurement is structured as a subcontract under the NAICS code 336340, which categorizes it within the automotive parts manufacturing sector, and is managed by the Defense Logistics Agency under the Department of Defense. Delivery of the tires must comply with strict logistical and documentation protocols established by the DLA, ensuring traceability, proper identification, and timely receipt at designated military locations. Although specific performance addresses and point of contact details are not provided, the contract reference links to the DIBBS system for official award records and tracking. The posting date of August 1, 2026, indicates this is a forward-looking acquisition, likely prepared for future operational needs, with fulfillment expected to align with defense supply chain timelines and readiness cycles.

Defense Logistics Agency

POSTED

3 days ago

DEADLINE

N/A

AI Contract Overview

The contract involves the supply and integration of a comprehensive trailer towing system, including a 2-inch trailer ball hitch, wiring harness protection, and a full 12-volt lighting system equipped with tail, brake, and turn signal lights. The work must be performed in accordance with technical specifications to ensure compatibility, durability, and compliance with Canadian safety and operational standards for military and government use. The place of performance is designated across multiple locations including St. John’s in New Brunswick, Yellowknife, and Québec, indicating a broad geographic scope requiring coordinated logistics and installation support. The procurement is issued as a subcontract under the NAICS code 336340, which classifies it within the motor vehicle electrical and electronic equipment manufacturing sector. The solicitation was posted on June 18, 2026, with a response deadline of July 28, 2026, providing potential suppliers a 40-day window to submit proposals. The contracting authority is the Department of National Defence under the Government of Canada, signaling that the system will serve defence-related transportation needs. All components must meet rigorous performance, environmental, and durability requirements suitable for Canada’s varied and often extreme weather conditions across the specified regions.

General Info

Supply and integration of military-grade trailer towing system compliant with Canadian safety standards across multiple locations.

Agency

Government of Canada → Department of National DefenceView Agency

NAICS

336340 - Motor Vehicle Brake System ManufacturingView NAICS

Place of Performance

New Brunswick, St. John's, YellowKnife, Québec, CAN

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PhaseClosed

PostedJun 18

subcontract

Response DeadlineJul 28

Deadline has passed

Submission Closed

07/28/2026, 07:00:00 PM UTC

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyGovernment of Canada → Department of National Defence

ContactsNo contacts available

OfficeN/A

Organization / Agency

Government of Canada → Department of National Defence

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Supply and integration of a 2-inch trailer ball hitch, wiring harness protection, and 12-volt lighting system including tail, brake, and turn signal lights.