80 -- EPOXY COATING KIT

8010-01-498-0777 UI: KTQTY NEEDED: 560/KT. TOTAL ORDERS: 2 EPOXY COATING KIT: DESCRIPTION COLOR GRAY in accordance with FED-STD-595B, dated December 15, 1989, and Change Notice 1, dated January 11,1994, color number 26270 Size: COMPONENT A (EPOXY RESIN) AND COMPONENT B (CURING AGENT) TO EQUAL 1 KILOGRAM (1 Quart) Safety: NONFLAMMABLE VOLATILE ORGANIC COMPOUNDS: 50.0 (grams/Liter) maximum Use: 100 PCT SOLIDS; METAL AND CONCRETE SURFACES SUBJECTED TO MARINE ENVIRONMENTS; THIS COLOR CAN BE USED AS A PRIMER, INTERMEDIATE OR TOPCOAT; LONG POT LIFE FORMULA GTS GROUP INC, EURONAVY USA DIV; part number: ES301K-12-01 Age on delivery shall not exceed 2 months. Date of reinspection shall be 12 months from date of manufacture. Section 112 of the Clean Air Act [U.S. EPA National Emissions Standard for Hazardous Air Pollutants - 40th Code of Regulations 63.780] specifies volatile organic compound and hazardous air pollutant content limits for compliant shipbuilding and ship repair coatings. Successful offeror shall provide the designated contracting officer representative a certificate of compliance as described in the U.S. EPA "Guidebook on How to Comply with the Shipbuilding and Ship Repair (Surface Coating) Operations NESHAP (EPA-453/B-97-001, January 1997, pages E-18, E-32, E-33). [http://www.epa.gov/ttn/uatw/shipb/shipguid.pdf]. This certificate is based either on known coating characteristics, or the results of EPA Method 24 volatile organic compound tests. Certificates need only be generated once for each applicable coating. When, and if, a supplier reformulates a coating, a new certificate would need to be generated. Suppliers are directed to put the following statements on the paint can labels: 1. A certification that paint in the container meets National Emission Standards for Hazardous Air Pollutants (NESHAP) requirements for shipbuilding and ship repair. 2. A statement of the ration of Volatile content to solids expressed as grams VOHAP per liter of solids. ITEM MARKING (1) National Stock Number (NSN). (2) Specification number (Including type, class, and color number) as applicable. (3) Manufacturer's name and part number. (4) Kit Name and Component Part. (5) Lot and Batch Number. (6) Date of Manufacture and date of expiration or reinspection (month and year). (7) Instructions for use. (8) Storage Instructions. PACKAGING The components of each kit shall be packaged in multiple friction closure metal cans in accordance with the supplier's normal commercial practice, provided that there will be no interaction chemically or physically with the contents so as to damage the container or alter the strength, quality, or purity of the contents. The containers shall be closed in a manner that will insure that the contents will not spill or leak from the containers during shipment, handling, storage and redistribution. Components of each individual kit shall be further packed together in kit form that will prevent accidental separation of the components during shipment, handling, storage and redistribution. PACKING Kits smaller than 2 gallons packaged and assembled as specified above shall be packed in a close-fitting corrugated fiberboard box conforming to Section 6(c), Rule 41 of the Uniform Freight Classification and Item 22 of the National Motor Freight Classification. Closure of the boxes shall be in accordance with Section 7 of Rule 41 of the Uniform Freight Classification. The filled boxes shall not weigh more than 65 pounds. Pails and drums shall meet the applicable requirements of the National Motor Freight Classification, Uniform Freight Classification, and Department of Transportation regulations. MARKING All unit, intermediate, transport packages and unit loads shall be marked for delivery to civilian activities in accordance with the FED-STD-123G, dated June 6, 1997, or marked for delivery to military activities in accordance with MIL-STD-129N, dated 15, May, 1997, as applicable. PLEASE SPECIFY FOB OR DESTINATION. ALL BIDS MUST BE RECEIVED BY COB 8-26-02. PRODUCT MUST BE MADE IN U.S.A. PLEASE INCLUDE MSDS. PLEASE FAX OR EMAIL BIDS TO: FAX# +1 (555) 000-0000/ EMAIL: contact@example.gov