Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

BEARING, ROLLER, TAPE

Active
SPE4A0-26-T-4223Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract is for the procurement of one tapered roller bearing, part number LM603049 902B3, with NSN 3110016496082, supplied by The Timken Corporation. Delivery is required within five days from the origin, FOB origin, with zero tolerance for quantity variance. Inspection and acceptance occur at the destination, and all packaging, preservation, and marking must comply with MIL-STD-2073-1E, MIL-DTL-197M, and MIL-STD-129. Preservation methods are determined by bearing type and closure per detailed specifications in MIL-DTL-197M, including application of protective lubricants and adherence to process controls outlined in paragraphs 3.3.4 through 3.9. Packaging must meet DLA’s RP001 requirements, and all items must be palletized accordingly. Technical and quality standards referenced by R and I numbers are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date. The item is identified under purchase request 7017719867, and the solicitation number is SPE4A0-26-T-4223, with a response deadline of August 17, 2026.

General Info

One tapered roller bearing, NSN 3110016496082, FOB origin, zero tolerance, MIL-STD compliant, delivery in five days.

Agency

Department Of Defense → AVIATION SUPPLY CHAIN ESOC BUYSView Agency

NAICS

332991 - Ball and Roller Bearing ManufacturingView NAICS

Place of Performance

US

Set-Aside

NONE

Documents

(1)

RFQ SPE4A0-26-T-4223 DLA Aviation Aug 10 2026

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → AVIATION SUPPLY CHAIN ESOC BUYS
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → AVIATION SUPPLY CHAIN ESOC BUYS
View Agency Profile
Office AddressUS
Contacts
Danita Davis
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
BEARING,ROLLER,TAPE
BEARING, ROLLER, TAPERED
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ001: TAILORED HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS
(MANUFACTURERS AND NON-MANUFACTURERS)
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RT001: MEASURING AND TEST EQUIPMENT
IDENTIFY TO:
RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
THE TIMKEN CORPORATION 60038 P/N LM603049 902B3
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017719867 0001 EA 1.000
NSN/MATERIAL:3110016496082
DELIVERY (IN DAYS):0005
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
SPE4A0-26-T-4223
SECTION B
PR: 7017719867 PRLI: 0001 CONT’D
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:ZZ CLNG/DRY:Z PRESV MAT:ZZ
WRAP MAT:ZZ CUSH/DUNN MAT:ZZ CUSH/DUNN THKNESS:Z
UNIT CONT:ZZ OPI:M
INTRMDTE CONT:ZZ INTRMDTE CONT QTY:ZZZ
PACK CODE:Q PACKING LEVEL: B
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:ZZ -ZZ Special Requirements
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PRESERVATION, PACKAGING, PACKING, AND MARKING REQUIREMENTS SHALL BE IN ACCORDANCE WITH MIL-DTL-197M.
1. METHOD OF PRESERVATION SHALL BE DETERMINED BY BEARING TYPE AND SIZE (REFER TO TABLE I).
2. PARAGRAPH 3.10.2, SELECTION OF UNIT PRESERVATION, APPLIES. PROTECTIVE LUBRICANT OR PRESERVATIVE COMPOUND SHALL BE DETERMINED DEPENDENT UPON BEARING TYPE AND CLOSURE IN ACCORDANCE WITH PARAGRAPH 3.3.4 AND TABLE II. FOR PRESERVATION PROCESS CONTROLS, DEPENDANT UPON BEARING TYPE, CLOSURE, AND LUBRICANT<(>,<)> PARAGRAPHS 3.4 THROUGH 3.9 APPLY.
3. PACKAGING PRECAUTIONARY MARKING REQUIREMENTS OF PARAGRAPH 3.12.4 APPLY.
4. CONTRACTOR'S PACKAGING FACILITY SHALL ADHERE TO THE QUALITY ASSURANCE VERIFICATION REQUIREMENTS AS CONTAINED WITHIN SECTION 4 OF MIL-DTL-197M. ...END OF SPECIAL PACKAGING NSN/Part Number: 3110-01-649-6082 Quantity: 1 EA Purchase Request: 7017719867QTY: 1 Delivery: 5 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 332991
New
DIBBS
BUSHING, SLEEVE
Solicitation # SPE4A6-26-T-14LP
The contract specifies the procurement of 11 bushings, sleeves with NSN 3120-01-680-6071 under solicitation SPE4A6-26-T-14LP, issued by the Defense Logistics Agency through the ASC Commodities Division. This is a total small business set-aside under NAICS code 332991 with a response deadline of August 17, 2026, and a delivery requirement of 951 days after contract award. Technical and quality requirements referenced in the document are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date. Packaging must comply with DLA standards, and tailored higher-level quality requirements apply to both manufacturers and non-manufacturers. Configuration changes require formal engineering change proposals or variance requests, and inspection and acceptance must occur at the origin. Government identification must be removed from non-accepted items. Item Unique Identification is not required per service customer direction. Technical data associated with this item is subject to export controls under ITAR or EAR, prohibiting unauthorized disclosure to foreign persons anywhere, including U.S.-based subsidiaries and employees; access is restricted to contractors certified under the US/Canada Joint Certification Program, who have completed mandatory DLA export control training and been formally approved. Performance is expected at Hill AFB, Utah, with primary point of contact Quentin McEachern.
ASC COMMODITIES DIVISION

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332991
New
DIBBS
BEARING UNIT, ROLLER
Solicitation # SPE4A6-26-T-14KU
The contract pertains to the procurement of 10 roller bearing units identified by part number 3871970C1 and NSN 3130015843531, issued under solicitation SPE4A6-26-T-14KU by the Department of Defense’s ASC Commodities Division. Delivery is required within five days of award, with FOB origin terms and no variance allowed in quantity. Inspection and acceptance occur at the manufacturer’s origin, and all items must comply with the DLA Master List of Technical and Quality Requirements, which supersede other standards such as ASTM D3951. Packaging must adhere to MIL-STD-129 and RP001 DLA Packaging Requirements, with palletization and labeling strictly controlled. The item must be marked with the manufacturer’s CAGE code 338X5 and part number as specified under RQ017, and the quality assurance plan B02 referenced in QAP-13873 Revision B dated December 11, 2013, governs conformance. Shipping must use the fastest traceable method, excluding parcel post, to the designated delivery point at DLA LMP Zone 1 Building 552 North in Texarkana, Texas. The required delivery date is January 16, 2026, and the item falls under NAICS code 332991 for other fabricated metal product manufacturing.
ASC COMMODITIES DIVISION

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332991
New
DIBBS
BEARING, BALL, ANNULA
Solicitation # SPE4A6-26-T-14MX
This solicitation, SPE4A6-26-T-14MX, seeks the procurement of 18 ball annular bearings with NSN 3110-01-517-2450, requiring delivery within 166 days. Offerors must comply with strict domestic sourcing regulations including the Berry Amendment, which now applies to purchases at or above $150,000, and the Buy American Act, necessitating full disclosure if any materials are non-domestic. The offeror must affirm that no covered telecommunications equipment or services from restricted foreign sources will be provided, in alignment with FAR 52.204-24 and DFARS 252.204-7016. Due to fluctuating demand, offerors are strongly advised to quote quantity ranges to enable procurement flexibility without resolicitation or added administrative overhead, except for Auto IDC transactions. Small business joint ventures must submit specific representations for eligibility under designated small business categories. All contractors must register via the new DLA Account Management & Provisioning System (AMPS) within two months to retain access to the Vendor Shipment Module; users of VSM WebServices must update their internal schema to avoid disruption. Additive manufacturing is prohibited unless explicitly approved, and any proposal including such items will be deemed ineligible for award. Offerors unable to submit a bid by the closing date must still register a “No Bid” on DIBBS with an anticipated quote date or explanation to maintain visibility and prevent premature requirement cancellation. Access to the solicitation and compliance details is available through the DIBBS portal.
ASC COMMODITIES DIVISION

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332991
New
DIBBS
PLATE, RETAINING, BEARIN
Solicitation # SPE4A6-26-T-14QK
The contract pertains to the procurement of a retaining plate for bearings, identified by NSN 3110013956735 and part number 5191205-2, with a required quantity of five units to be delivered within 20 days FOB origin. All items must comply with stringent technical and quality requirements referenced through R-numbers from the DLA Master List, including packaging per MIL-STD-2073-1E and MIL-DTL-197M, with preservation methods tailored to bearing type and closure, and labeling strictly following MIL-STD-129 with special marking codes. Inspection and sampling protocols require zero non-conformances unless otherwise specified, with verification levels set to VII, IV, and II for critical, major, and minor attributes or corresponding AQLs of 0.1, 1.0, and 4.0. Packaging must be palletized per DLA standards and include approved preservation materials and methods as defined in MIL-DTL-197M, with the contractor’s facility subject to quality assurance verification under the same standard. A critical sourcing restriction applies: all ball and roller bearings must be manufactured in the United States, its outlying areas, or Canada, with over 50% of the total cost of bearing components originating from these regions. A signed Contractor’s Declaration documenting domestic content is mandatory and must be submitted upon request; failure to provide this will disqualify the quote. If no compliant offerings are received, the solicitation may be canceled or held pending a waiver request under DFARS 252.225-7016. The item is not subject to Item Unique Identification per DFARS 252.211-7003. The contract is governed by DLA packaging and preservation directives, with delivery and acceptance occurring at origin, and no variance in quantity is permitted. The solicitation number is SPE4A6-26-T-14QK, with a response deadline of August 17, 2026, and primary point of contact is Jessica Jones at DLA.
ASC COMMODITIES DIVISION

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332991
New
DIBBS
BUSHING, SLEEVE
Solicitation # SPE4A6-26-T-14NB
The contract pertains to the procurement of a bushing sleeve designated by part number 1168834-1, manufactured to the current revision of Drawing 1168834 by approved suppliers New Hampshire Ball Bearings Inc and Kamatics Corporation. The item is classified as a critical application component and must strictly conform to technical and quality requirements referenced in the DLA Master List of Technical and Quality Requirements, including specific controls for inspection at origin, physical identification marking, packaging per MIL-STD-2073-1E, and measuring equipment calibration. Unit identification is not required per customer request, and government markings must be removed from non-accepted items. Packaging must adhere to DLA standards with unique labeling per MIL-STD-129 and no special marking codes. The item is source and design controlled, with manufacturing compliance tied to Technical Data Package Rev A Gen 1 and referenced Quality Assurance Plan B02. The contract specifies a quantity of 15 units at $15.00 each, delivered FOB origin with zero variance tolerance, and an accepted delivery window of 124 days from the solicitation date. Inspection and acceptance occur at the origin, and packaging must meet all DLA packaging requirements including containment, cushioning, and palletization. The delivery destination is the DLA Distribution facility in New Cumberland, Pennsylvania, with transportation governed by DLAD procedural notes C19 and C20. The solicitation number is SPE4A6-26-T-14NB, with a response deadline in August 2026 and a required ship date of December 20, 2026, though the original delivery commitment extends to January 20, 2027. The NSN is 3120-01-172-8141, and the contracting activity falls under the Department of Defense, specifically the ASC Commodities Division.
ASC COMMODITIES DIVISION

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332991
New
DIBBS
CONE AND ROLLERS, TA
Solicitation # SPE4A6-26-T-14LW
This contract solicits tapered roller bearings under NSN 3110016950154 with a requirement for four units to be delivered within 20 days FOB origin, with no variance allowed in quantity. The item must comply with stringent technical and quality standards referenced in the DLA Master List of Technical and Quality Requirements, and packaging must adhere to MIL-STD-2073-1E, MIL-DTL-197M, and MIL-STD-129 for marking and preservation, including specific procedures for protective lubrication based on bearing type and closure. The contractor’s packaging facility must meet the quality assurance verification criteria outlined in MIL-DTL-197M, and all items must bear proper identification with no government markings removed from non-accepted supplies. Sampling follows MIL-STD-1916 or equivalent zero-based plans, with critical, major, and minor attributes assigned verification levels VII, IV, and II respectively or AQLs of 0.1, 1.0, and 4.0. A critical sourcing restriction prohibits award to any bearing not manufactured in the United States, its outlying areas, or Canada, with at least 50% of the total bearing component cost derived from these regions. Contractors must submit a completed Declaration on the Domestic/Foreign Nature of Materials as required by DFARS 252.225-7016, accessible via the DLA Foreign Bearing Waiver website; failure to provide this documentation will disqualify the quote. The solicitation may be canceled or held pending a waiver if no compliant offers are received, and inspection and acceptance occur at destination. The unit of issue is each, priced at $4.00, with the procurement under solicitation SPE4A6-26-T-14LW, managed by the DLA Commodity Division’s ASC office, and responses are due by August 17, 2026.
ASC COMMODITIES DIVISION

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332991
New
DIBBS
RETAINER, ROLLER, BEA
Solicitation # SPE4A6-26-T-14KG
This contract solicits six retainer, roller bearing units under NSN 3110-01-183-7133 and part number 9732M21P01 from General Electric Aircraft Engines, with delivery required within 54 days to Tinker Air Force Base in Oklahoma. The item is designated as a GE PBL item and is subject to strict domestic sourcing requirements under DFARS Clause 252.225-7016, which mandates that each bearing must be manufactured entirely in the United States, its outlying areas, or Canada, with over 50% of the total cost of all bearing components—包括滚动元件、保持架、内圈和外圈—originating from these regions. Contractors must submit a signed declaration verifying the domestic origin of materials, failure to provide which may disqualify their quotation. If no qualifying offers are received, the solicitation may be canceled or held pending a waiver request approved under DFARS 225.7009-4. Packaging must comply with MIL-STD-2073-1E and MIL-STD-129, with no special marking required, and all units must be delivered FOB origin with zero quantity variance allowed. Inspection and acceptance occur at origin, and the contract reference number is SPE4A6-26-T-14KG, with a response deadline of August 17, 2026 and an original required delivery date of April 16, 2028. The procurement is managed by the DLA Commodities Division with Chanee Yarborough as the point of contact.
ASC COMMODITIES DIVISION

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332991
New
DIBBS
BUSHING, SLEEVE
Solicitation # SPEFA5-26-T-0984
The contract specifies the procurement of two BUSHING, SLEEVE parts with NSN 3120-01-548-9548 and manufacturer part number 400935A3 from CNH INDUSTRIAL AMERICA LLC, identified by CAGE code 10988. Delivery is required within five days of contract award, FOB origin, with no tolerance for quantity variance. The items must be inspected and accepted at the destination, and all packaging must comply with ASTM D3951 and MIL-STD-129, with palletization following DLA’s packaging requirements, while the DLA Master List of Technical and Quality Requirements supersede any conflicting standards. Sampling and inspection follow MIL-STD-1916 or an equivalent zero-based plan, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively; unspecified attributes are deemed major, and acceptance requires zero non-conformances unless otherwise stated. Physical marking must identify the manufacturer, part number, and contract details per RQ017, and all items must be shipped via traceable freight methods, not parcel post, to the designated delivery point at Fort Leonard Wood, Missouri. The contract reference is SPEFA5-26-T-0984 with a required delivery date of April 14, 2026, and the point of contact is Tanya Whitney at the Defense Logistics Agency.
Defense Logistics Agency

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332991
New
DIBBS
BEARING, ROLLER, NEEDLE
Solicitation # SPE4A6-26-T-14NQ
The contract specifies the procurement of 60 needle roller bearings with part number MS24464-24 and NSN 3110-00-227-2875, sourced under solicitation SPE4A6-26-T-14NQ. All components must comply with qualified product list (QPL) or qualified manufacturer list (QML) requirements, and only qualified sources may be used. Technical and quality standards are governed by the DLA Master List of Technical and Quality Requirements, with sampling governed by MIL-STD-1916 or ASQ H1331 Table 1 using zero-defect acceptance criteria unless otherwise specified. Attributes are classified with verification levels VII, IV, and II corresponding to AQLs of 0.1, 1.0, and 4.0. Item Unique Identification is not required per DFARS 252.211-7003(c)(1)(i), and government identification must be removed from non-accepted items. The bearing must meet SAE-AS24464 and SAE-AS39901 standards, and the QPL-AS39901-2 is mandatory for qualification. Packaging and preservation must strictly adhere to MIL-STD-2073-1E and MIL-DTL-197M, with preservation methods selected based on bearing type and closure per referenced tables, using approved lubricants and protective compounds. Packaging facilities must comply with Section 4 of MIL-DTL-197M for quality assurance verification. Marking follows MIL-STD-129 with special requirements designated as ZZ-ZZ, and palletization complies with DLA packaging requirements. The item is delivered FOB origin with no quantity variance permitted, inspected and accepted at origin, with delivery due in 328 days. Unit price is $60.00 per ea, totaling $3,600. The contracting office is the ASC Commodities Division of the Department of Defense, with Angela Mills as primary point of contact, and the place of performance is NEW CUMBERLAND, PA 17070-5002.
ASC COMMODITIES DIVISION

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332991
New
DIBBS
Supply of Self-Aligning Plain Bearings
Defense Logistics Agency

POSTED

2 days ago

DEADLINE

N/A
View Details
NAICS: 332991
New
DIBBS
Sleeve Bearing Supply (NSN 3120-00-022-8960)The contract entails the supply of a single sleeve bearing identified by NSN 3120-00-022-8960, manufactured to meet rigorous military specifications ensuring performance, reliability, and compatibility with defense systems. The item must adhere to strict traceability requirements, enabling full lineage from raw material to final assembly, and must comply with anti-counterfeit standards to safeguard against fraudulent or substandard components. Packaging and labeling are governed by MIL-STD-129, ensuring uniformity, durability, and clear identification for logistical handling within military supply chains. The contract is classified as a subcontract under the NAICS code 332991 and is managed by the Defense Logistics Agency under the Department of Defense, with the posting date listed as August 7, 2026. The place of performance and point of contact details are unspecified, but the award reference is accessible through the DIBBS portal using the contract number SPE7M126P9462.
Defense Logistics Agency

POSTED

2 days ago

DEADLINE

N/A
View Details
NAICS: 332991
New
Federal
31--CB ROTATING ASSY
Solicitation # SPRMM126QKG47
The contract is for the sole-source procurement of 16 units of the CB ROTATING ASSY (NSN 1H-3120-014828716, P/N 4D09668-004) from Northrop Grumman Systems Corporation (CAGE 90099), the only approved source of supply, as determined by market research showing it is uneconomical to acquire technical data rights or reverse engineer the part. The acquisition is conducted under FAR 6.302-1, with no competition planned, although responsible sources may submit capability statements within 45 days of the presolicitation notice for the government’s consideration. The item is not being acquired under FAR Part 12 despite commercial item inquiries, indicating non-commercial technical specifications apply. Deliveries are to be split between two DLA distribution centers: W25G1U in New Cumberland, PA, and W62G2T in Tracy, CA. Packaging, preservation, and marking must comply with applicable military standards such as MIL-STD-129 and MIL-STD-2073, though exact details are to be obtained from DODSSP or ASSIST-Online. The government will conduct inspection and acceptance, with FOB Origin and origin-based inspection under consideration, and no formal COR or COTR is identified, with Jennifer Elliott of DLA Mechanicsburg serving as the primary point of contact. The solicitation, SPRMM126QKG47, is a small business set-aside with no specific contract type listed, and vendors are requested to indicate their ability to provide cost or pricing data, commercial warranties, and willingness to accept up to four option years. All responses must be submitted electronically by September 21, 2026, to the specified email, with PDF being the preferred format, and no formal contract clauses or line-item pricing details are provided in the documentation.
SPRMM1 DLA Mechanicsburg

POSTED

2 days ago

DEADLINE

in about 1 month
View Details

More opportunities from Department Of Defense → AVIATION SUPPLY CHAIN ESOC BUYS

Same awarding agency

NAICS: 332722
New
DIBBS
SCREW, CAP, SOCKET HEAD
Solicitation # SPE4A0-26-T-4215
The contract is for the procurement of two socket head cap screws with part number 23-10572-275 and NSN 5305-01-336-6837, sourced from Daimler Truck North America LLC in Portland, OR. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with revisions effective on either the solicitation issue date or award date depending on acquisition size. Packaging must comply with ASTM D3951 and MIL-STD-129, with palletization adhering to DLA packaging standards, and item identification marking is required under RQ017, though unique identification is waived per the service customer’s request. Sampling follows MIL-STD-1916 or an equivalent zero-based plan, with acceptance strictly requiring zero non-conformances unless otherwise specified, and attributes are to be classified as critical, major, or minor with corresponding verification levels or AQLs. There is no shelf life requirement for the material. Delivery is due within five days of contract award, FOB origin, with no variance permitted in quantity, and inspection and acceptance occur at the destination. The shipment must be sent via traceable means, excluding parcel post, to the designated delivery point at Fort Bragg, NC, with the freight and mark-for addresses matching. The item must be labeled and documented per the specified requirements, including the contract number SPE4A0-26-T-4215, purchase request 7017722270, and government-specific identifiers. The required delivery date is August 4, 2026, with a solicitation posting date of August 9, 2026, and response deadline of August 17, 2026. The contracting office is under the Department of Defense’s Aviation Supply Chain ESOc Buys, with Danita Davis as the primary point of contact.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 336413
New
DIBBS
SUPPORT, STRUCTURAL
Solicitation # SPE4A0-26-T-4211
The contract pertains to SUPPORT, STRUCTURAL items with NSN/Part Number 1560-01-650-4509, for a quantity of four units, under Purchase Request 7017745999, with delivery required within five days after delivery order. The solicitation, numbered SPE4A0-26-T-4211, was posted on August 9, 2026, and responses are due by August 17, 2026. The work is classified under NAICS code 336413 and is managed by the Department of Defense’s Aviation Supply Chain ESOC Buys office, with performance to occur at FPO, ZIP 96632. The contract is subject to stringent export control regulations under ITAR or EAR, meaning technical data associated with the item cannot be disclosed to any foreign person, whether inside or outside the United States, without prior authorization from the Department of State or Department of Commerce. DFARS 252.225-7048 governs the handling of this controlled data, and only DLA contractors with valid US/Canada Joint Certification Program certification, completed training on DOD export-controlled data, and approved access via the DLA questionnaire may receive the technical information. The primary point of contact for this solicitation is Danita Davis, reachable via email and phone provided.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
STUD, PLAIN
Solicitation # SPE4A0-26-T-4225
The contract is for a single plain stud with NSN 5307-01-626-8290, quantity one, under solicitation SPE4A0-26-T-4225, with a response deadline of August 17, 2026, and delivery required within five days of award. The item is issued by the Department of Defense through the Aviation Supply Chain ESOC Buys office, with performance required at Miramar, Florida, 33025-7971. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, accessible online, with the applicable revision determined by the solicitation or award date depending on acquisition scale. Packaging must comply with DLA standards, and non-accepted supplies must have government identification removed. Items must be physically marked per bare item marking requirements. Sampling must follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise stated; critical, major, and minor attributes are assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively, with unspecified attributes treated as major. The manufacturer may choose attribute or variable inspection under MIL-STD-1916 unless the contract specifies otherwise. The point of contact is Danita Davis, reachable via email and phone provided.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 333613
New
DIBBS
GEAR CLUSTER
Solicitation # SPE4A0-26-T-4217
The contract pertains to the procurement of a GEAR CLUSTER item with NSN 3020-00-916-3550 and part number 75331-2, supplied by HONEYWELL INTERNATIONAL INC., under solicitation SPE4A0-26-T-4217. Three units are required at a unit price of $3.00, for a total price of $9.00, with delivery due within five days FOB origin. Inspection and acceptance occur at the origin, and the quantity variance is strictly zero percent, meaning no overruns or underruns are permitted. Packaging must comply with MIL-STD-2073-1E and MIL-STD-129, with specific preservation methods, packaging materials, and coding specified, and palletization must adhere to DLA packaging requirements. Marking is to follow standard guidelines without special codes. The item is designated as a critical application item with no shelf life requirement, and item unique identification is not mandated per customer request, with DFARS 252.211-7003(c)(1)(i) applying. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with sampling protocols aligned to MIL-STD-1916 or ASQ H1331 Table 1, or comparable zero-based plans, where critical, major, and minor attributes are assigned verification levels or AQLs of VII/0.1, IV/1.0, and II/4.0 respectively. Documentation for source approval, cybersecurity compliance at CMMC Level 2, and removal of government identification from non-accepted supplies are required. Delivery is to be shipped to the Tainan Branch Warehouse in Taiwan, with freight details and forwarding instructions governed by DLAD procedural notices. The contract includes specific government-use codes and reference identifiers, and the required delivery date is set for September 11, 2024, with the solicitation issued on August 9, 2026, and responses due by August 17, 2026, under the NAICS code 333613 for mechanical power transmission equipment manufacturing.
Mechanical Power Transmission Equipment Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
CLIP, SPRING TENSION
Solicitation # SPE4A0-26-T-4220
The contract specifies the procurement of one unit of a spring tension clip with NSN 5340-01-588-4798 and part number 56-1209 from Goodrich Corporation, under solicitation SPE4A0-26-T-4220. Delivery is required within five days of award, with shipment FOB origin and no variance allowed in quantity. Inspection and acceptance both occur at the destination, and all packaging must comply with DLA’s Master List of Technical and Quality Requirements, overriding any other standards such as ASTM D3951. Non-hazardous items must be commercially packaged per ASTM D3951, while hazardous items must follow Fed-Std-313 and TQ requirement IP025, with all packaging labeled per MIL-STD-129 and palletized according to RP001. The use of Class I ozone-depleting chemicals is strictly prohibited, and any substitutes require prior approval. The item must be shipped via traceable means, excluding parcel post, to the designated military destination at Fort Hood, Texas, with a required delivery date of August 4, 2026, and no need ship date provided. The contract incorporates all referenced DLA technical and quality requirements, which take precedence over other specifications, and the unit of issue is each.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 326220
New
DIBBS
HOSE ASSEMBLY, NONME
Solicitation # SPE4A0-26-T-4222
This contract is for a single non-mechanical hose assembly identified by NSN 4720-01-713-7766 and part number AE2464689H0264, sourced from Sikorsky Aircraft Corporation with CAGE code 78286. The item must comply with a comprehensive set of technical, quality, and packaging requirements mandated by the Defense Logistics Agency, including adherence to the DLA Master List of Technical and Quality Requirements referenced by R and I numbers. Supply chain traceability documentation must be retained by the contractor in accordance with DLAD Procurement Note C03 from August 2016, and while item unique identification is not required, the contractor must follow strict configuration control and variance procedures. The product is classified as a Type I shelf-life item with a fixed 120-month (10-year) expiration date, marked with special code 32, and must meet non-tailored quality requirements based on ISO 9001:2015. All manufacturing and inspection activities must follow approved sampling standards—either MIL-STD-1916 or ASQ H1331—with zero non-conformances allowed in the sample unless otherwise specified. Measuring and test equipment used must be calibrated and verified, and cybersecurity compliance requires a CMMC Level 2 self-assessment. Packaging must conform to MIL-STD-2073-1E and MIL-STD-129, with marking and palletization following DLA-specific guidelines; the item is not to be shipped via parcel post and must be delivered using the fastest traceable means. Delivery is required within five days of award, FOB origin, to a designated receiving location at Naval Air Station Fallon, Nevada, with no tolerance for quantity variance. The contract was issued under solicitation SPE4A0-26-T-4222 and is governed by Federal acquisition rules with full accountability for compliance across technical, quality, cybersecurity, and logistics dimensions.
Rubber and Plastics Hoses and Belting Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 333613
New
DIBBS
GEAR CLUSTER
Solicitation # SPE4A0-26-T-4218
This contract pertains to the procurement of a gear cluster identified by part number 75331-2 and NSN 3020-00-916-3550, with a single unit requirement to be delivered within five days from the origin. The item is designated as a critical application item with no shelf life requirement, and item unique identification is not mandated per the service customer’s request, in accordance with DFARS 252.211-7003(c)(1)(i). Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements referenced in the contract, with applicable revisions tied to the solicitation or award date depending on acquisition size. Packaging must conform to MIL-STD-2073-1E and MIL-STD-129 for marking, with specific packaging codes and methods outlined, including dry preservation and designated unit and intermediate containers. Palletization follows DLA packaging standards and no special marking is required. Inspection and acceptance occur at origin, with zero nonconformances required in sampling under MIL-STD-1916 or comparable zero-based plans unless otherwise defined, and unspecified attributes are treated as major. The contract includes cybersecurity compliance obligations under CMMC Level 2 self-assessment and covered defense information directives. Delivery is to Tainan, Taiwan, via the Parts-Attach General Depot, with freight forwarding managed under DLA procedural notes. The contract is issued under solicitation SPE4A0-26-T-4218, with a response deadline of August 17, 2026, and is managed by the Department of Defense’s Aviation Supply Chain ESOc Buys office.
Mechanical Power Transmission Equipment Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332510
New
DIBBS
BUSHING, TAPERED
Solicitation # SPE4A0-26-T-4224
The contract is for one tapered bushing with NSN 5365-01-500-5183 and part number 117174, supplied by Reliance Electric Company DBA 71956, under solicitation SPE4A0-26-T-4224. Delivery is required within five days of contract award, FOB origin, with no variance allowed in quantity, and inspection and acceptance occur at the destination. Packaging must comply with MIL-STD-2073-1E and DLA packaging requirements, including specific methods for preservation, wrapping, and containment, with marking adhering strictly to MIL-STD-129 and no special markings required. The item must be shipped via the fastest traceable means, excluding parcel post, to the designated government delivery address in Jacksonville, Florida, with freight shipping directed to the Distribution Management Office. Quality and verification are governed by technical and quality requirements referenced from the DLA Master List, including sampling protocols based on MIL-STD-1916 or equivalent zero-based plans, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. Acceptance requires zero non-conformances unless otherwise specified. Physical identification of the item must meet RQ017 requirements, and all packaging and labeling must align with DLA standards. The unit of issue is each, priced at $1.00, with a total contract value of $1.00. The required delivery date is August 5, 2026, and the item is classified under NAICS code 332510 for federal procurement by the Department of Defense, Aviation Supply Chain ESO Buys.
Hardware Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332999
New
DIBBS
PLUG, MACHINE THREAD
Solicitation # SPE4A0-26-T-4213
The contract is for one machine thread plug, part number 941279 with NSN 5365015772669, supplied by Parker Hannifin Corporation, required to be delivered within five days to Fort Bliss, Texas, under solicitation SPE4A0-26-T-4213. The item must comply with the DLA Master List of Technical and Quality Requirements referenced by R and I numbers, which take precedence over all other standards including ASTM D3951, and packaging must adhere to MIL-STD-129 and DLA Packaging Requirements, with palletization specified under RP001. Inspection and acceptance occur at the destination, with zero non-conformances required under sampling protocols derived from MIL-STD-1916 or ASQ H1331, treating unspecified attributes as major and enforcing strict AQL levels for critical, major, and minor characteristics. The unit of issue is each, with no variance permitted in quantity, and shipment must be transported via traceable, non-parcel post means under a RDD/_NMCS designation with the ship-to, mark-for, and freight address all matching the same Fort Bliss military unit. Delivery is required by July 23, 2026, and all labeling, marking, and identification must follow RQ017 specifications, including removal of government identifiers from non-accepted supplies, while measuring and testing equipment must meet RT001 standards. The contract is under the Department of Defense, administered by the Aviation Supply Chain ESOC, with Danita Davis as the point of contact.
All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332510
New
DIBBS
SPACER, SLEEVE
Solicitation # SPE4A0-26-T-4212
The contract is for the procurement of 3 units of a spacer, sleeve with NSN 5365-01-398-3676 and part number 7993-L-800 from Milwaukee Valve Co., Inc., under solicitation SPE4A0-26-T-4212. Delivery is required within five days of the contract award, with goods to be shipped FOB origin and accepted at the destination. The purchase quantity is fixed with no variance allowed, and inspection and acceptance occur upon arrival at the delivery point. Compliance is mandatory with the DLA Master List of Technical and Quality Requirements, which supersede all other standards including ASTM D3951. Packaging must adhere to MIL-STD-129 for marking and labeling, and palletization must follow DLA Packaging Requirements. Sampling and inspection follow MIL-STD-1916 or equivalent zero-based plans, with zero non-conformances required unless otherwise stated, and critical, major, and minor attributes are assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. The material has no shelf life restriction. The shipment is to be sent using a traceable freight method, excluding parcel post, to the specified delivery address in Augusta, Georgia, with all packaging labeled per the contract’s unit of issue and quantity per unit pack. The required delivery date is July 30, 2026, and the point of contact for inquiries is Danita Davis of the Department of Defense’s Aviation Supply Chain ESOC Buys.
Hardware Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 325120
New
DIBBS
CALIBRATING GAS MIXTUR
Solicitation # SPE4A0-26-T-4214
The contract specifies the procurement of a single unit of a 5 ppm nitrogen dioxide (NO2) calibration gas mixture balanced with nitrogen, packaged in a 33 cubic foot cylinder containing 58 liters, under NSN 6830-01-609-2980 and manufacturer part number 600-0055-000 from Honeywell International Inc. The item is classified as a commercial off-the-shelf (COTS) product with a non-extendable shelf life of three months (Type I, Code C), requiring strict adherence to DLA packaging standards including MIL-STD-2073-1E and MIL-STD-129R for marking and labeling. The gas is identified as a hazardous material under UN1956, Hazard Class 2.2, and must be shipped in compliance with applicable hazmat regulations, with cylinders that cannot fit into UN-certified 4G fiberboard boxes required to be palletized as Load Type IX per MIL-STD-147. The item must be shipped FOB destination within five days of award, with zero tolerance for quantity variance, and cannot be delivered via parcel post—only traceable freight methods are permitted. The delivery address is the Naval Medical Readiness and Logistics Command at Cheatham Annex in Williamsburg, Virginia, and inspection and acceptance occur at the destination. The contract mandates that all shipping documentation and hazardous communication comply with OSHA and SDS regulations, requiring prior review and approval of safety data sheets and hazard labels by technical personnel, with copies submitted to the DLA Aviation HMIRS office. Mercury or mercury-containing compounds are strictly prohibited unless specifically exempted for functional components like sensors or laboratory reagents specified by NAVSEA, and portable fluorescent lamps or instruments containing mercury must include a secondary containment barrier. Sampling must follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required for acceptance, and attributes are assigned verification levels of VII, IV, and II for critical, major, and minor characteristics respectively.
Industrial Gas Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 335999
New
DIBBS
MOUNTING BASE, ELECT
Solicitation # SPE4A0-26-T-4221
This contract specifies the procurement of a Mounting Base, Electrical with NSN 5975-01-160-6275 and part number 2041442-0102, for a single unit to be delivered in five days FOB origin. The item is classified as a Critical Application Item and must be supplied by one of three approved vendors: Honeywell International Inc DBA, Ontic Engineering & Manufacturing Inc, or Super Tek Electronics Inc. Delivery is required to Point Mugu, CA, with inspection and acceptance occurring at the destination. Packaging must comply with MIL-STD-2073-1E and MIL-STD-129, and palletization must follow DLA Packaging Requirements. Special markings are not required, and hazardous material packaging guidelines apply. The shipment must be sent via the fastest traceable means, excluding parcel post, and is designated as RDD 999/NMCS. Sampling procedures must adhere to MIL-STD-1916 or ASQ H1331 with zero non-conformances allowed unless otherwise stated, and attributes must be verified at specified levels. The contract incorporates a comprehensive set of technical and quality requirements from the DLA Master List, including cybersecurity compliance at CMMC Level 2, removal of government identification from non-accepted items, and tailored higher-level quality requirements for manufacturers and non-manufacturers. The purchase request number is 7017395882, the contract number is SPE4A0-26-T-4221, with a required delivery date of July 6, 2026, and the point of contact for inquiries is Danita Davis.
All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details