Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

This Government Contract opportunity from Department Of Defense was posted on July 12, 2017. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Cemetery Operations and Maintenance

Awarded
W911SD-17-T-0070Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 812220
SLED
Crescent Gardens Cemetery, Conditional Use Permit No. (CUP230002)
Solicitation # CUP230002
The Crescent Gardens Cemetery project, identified by Conditional Use Permit No. CUP230002, involves the development of an 85-acre site in the Meadowbrook community of unincorporated Riverside County, California. The project, submitted by the Muslim Mortuary Cemetery Committee, allocates 46.4 acres for development and 38.6 acres for conservation. The planned infrastructure includes a 20,000-plot cemetery with approximately 24.6 acres of burial plots, a 11,079-square-foot chapel, a 5,559-square-foot Ceremonial Cleansing Facility, a 2,090-square-foot caretaker residence, and a 1,358-square-foot equipment shed. Additional site improvements consist of interior private roads, an on-site septic system, four water quality and detention basins, landscaping, irrigation, and shielded lighting. Security will be managed via wrought iron fencing and gates, with site access provided through Garfield Road. The project is subject to the California Environmental Quality Act (CEQA), requiring the Riverside County Planning Department to prepare a Focused Environmental Impact Report (FEIR) to evaluate impacts on geology, soils, hydrology, water quality, and land use. The development must adhere to County Zoning Ordinance 348, the Elsinore Area Plan, and specific General Plan designations for Very Low Density Residential and Rural Mountainous land use. Project coordination is led by Project Planner Krista Mason, with the environmental review process including a public scoping meeting and a deadline for input responses by September 10, 2026.
Riverside County

POSTED

3 months ago

DEADLINE

N/A

AI Contract Overview

Show more

This contract, solicitation number W911SD-17-T-0070, covers the operations and maintenance of the West Point Cemetery for the Department of Defense. Managed by the W6QM Micc-West Point office in New York, the agreement consists of a base year and four option years, with a period of performance beginning on September 30, 2017. The scope of work, as detailed in the Performance Work Statement, includes comprehensive turf management, gravesite preparation, and headstone maintenance to ensure the upkeep of the Post Cemetery. The procurement process involved multiple amendments to the original request for quotation to address vendor inquiries and refine the Performance Requirements Summary, specifically regarding water infrastructure, equipment maintenance, and turf renovation. Labor standards for the project are governed by U.S. Department of Labor Wage Determination No. 2015-4159 for Orange County, New York, ensuring compliance with the Service Contract Act and applicable federal minimum wage requirements.

General Info

Contract Value

$427,500

NAICS

812220 - Cemeteries and Crematories

Place of Performance

NY, USA

Set-Aside

NONE

Award Issued Date

Documents

5

Amendment 0001 to Solicitation W911SD-17-T-0070

PDF, High priority: read this firstamendment
High

Amendment 0002 - Cemetery Maintenance RFQ W911SD-17-T-0070

PDF, High priority: read this firstamendment
High

G4 Cemetery Maintenance RFQ

DOC, High priority: read this first112 pages · rfq
High

Wage Determination No. 2015-4159 (Rev. 1) - Orange County, NY

DOCX, High priority: read this firstwage-determination
High

Map of West Point Cemetery

PDF, Low priorityspecifications
Low

AI Contract Breakdown

Uniform Contract Format

Contract not broken down yet

CLEATUS splits the solicitation into Uniform Contract Format (UCF) sections: scope, pricing, deliverables, and evaluation criteria.

Timeline

3 updates
PhaseAwarded
Posted

Sources Sought

Type Changed

Sources Sought → Presolicitation

Type Changed

Presolicitation → Combined Synopsis

Notice updated

Response deadline changed from May 17, 2017 to May 31, 2017. The notice description changed.

Notice updated

Response deadline changed from May 31, 2017 to Jun 7, 2017. The notice description changed.

Notice updated

The notice description changed.

Awarded

Contract was awarded

Submission Closed

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → W6QM Micc-West Point
Contacts1 person available
OfficeWEST POINT, NY, 10996-1514, USA
Office AddressWEST POINT, NY, 10996-1514, USA
Contacts
Christa J. Mitchell

Full Description

Show more
THIS IS A SOURCES SOUGHT NOTICE ONLY. The U.S. Government desires to procure the Cemetery Operations and Maintenance (O&M) service for the United States Military Academy (USMA) on a small business set-aside basis. The U.S. Government encourages all small businesses, in all socioeconomic categories (including, 8(a) Business Development Program, Small Disadvantage Business, Historically Underutilized Business Zone, Service-Disabled Veteran-Owned, Women-Owned Small Business concerns), to identify their capabilities in meeting the requirement at a fair market price. This notice is issued solely for information and planning purposes - it does not constitute a Request for Quote (RFQ)/Invitation for Bid (IFB)/Request for Proposal (RFP) or a promise to issue an RFQ, IFB or RFP in the future. This notice does not commit the U.S. Government to contract for any supply or service. Further, the U.S. Government is not seeking quotes, bids or proposals at this time and will not accept unsolicited proposals in response to this sources sought notice. The U.S. Government will not pay for any information or administrative costs incurred in response to this notice. Submittals will not be returned to the responder. Not responding to this notice does not preclude participation in any future RFQ or IFB or RFP, if any is issued. If a solicitation is released, it will be synopsized on the Governmentwide Point of Entry. It is the responsibility of potential offerors to monitor the Governmentwide Point of Entry for additional information pertaining to this requirement. The anticipated NAICS code(s) is 812220 Cemeteries and Crematories with a small business size standard of $20.5M. A need is anticipated for Cemetery O&M service at USMA. It is the U.S. Government's intent to compete this requirement (see attached Performance Work Statement) between capable small businesses. Please submit your information to contact@example.gov NLT than February 8, 2017 @ 11:00 am EST. In response to this sources sought, please provide: 1. Name of the firm, point of contact, phone number, email address, DUNS number, CAGE code, a statement regarding small business status (including small business type(s)/certifications(s) such as SDB, 8(a), HUBZone, SDVOSB, WOSB, etc.) and the corresponding NAICS code. 2. Identify whether your firm is interested in competing for this requirement as a prime contractor or not. Identify subcontracting, joint ventures or teaming arrangement that will be pursued, if any. 3. Information in sufficient detail regarding previous experience (indicate whether as a prime contractor or subcontractor) on similar requirements (include size, scope, complexity, timeframe, government or commercial), pertinent certifications, etc., that will facilitate making a capability determination. 4. Information to help demonstrate that the requirement is commercially available, including pricing information, basis for the pricing information (e.g., market pricing, catalog pricing), delivery schedules, customary terms and conditions, warranties, etc.

More opportunities from Department Of Defense → W6QM Micc-West Point

Same awarding agency

NAICS: 315210
New
Federal
SOLICITATION - U.S. Army West Point India White Coats, Trousers, Dresses
Solicitation # W911SD-26-Q-A114
The Mission and Installation Contracting Command West Point is soliciting quotes for a multi-year, firm-fixed-price contract to manufacture India White coats, trousers, and skirts for male and female cadets at the United States Military Academy. This procurement is a 100 percent set-aside for total small business concerns under NAICS code 315210. The contract features an ordering period from November 1, 2026, through October 31, 2033, with an initial delivery estimated for May 2027. A unique material sourcing arrangement is in place where the government provides all fabric and associated materials as government furnished items during the base year, while the contractor becomes solely responsible for sourcing all materials during the option years. The award will be based on the lowest price source selection, provided the offeror passes a technical evaluation of required samples for each garment type. All quotes must be submitted electronically via email to the designated point of contact by November 16, 2026, at 2:00 PM EST, which is also the strict deadline for the receipt of physical samples. Technical requirements are governed by specific product descriptions and military standards, including mandatory first article testing for the base year's first delivery order. Invoicing and payment will be processed electronically through the Wide Area WorkFlow system.
Cut and Sew Apparel Contractors

POSTED

3 days ago

DEADLINE

in 19 days
View Details
NAICS: 332215
New
Federal
SOLICITATION Cadet Swords USMA West Point
Solicitation # W911SD-27-Q-A002
The Mission and Installation Contracting Command Installation Contracting Office at West Point, NY, is soliciting quotes for the manufacture and delivery of Cadet Sabers, including scabbards and covers, for graduating cadets of the United States Military Academy. This requirement is a 100 percent set aside for total small business concerns under NAICS code 332215. The procurement is structured as a firm fixed price contract consisting of a base year for approximately 1,700 sabers and two subsequent option periods. The base period delivery date is firmly set for April 12, 2027, with subsequent years ending on December 4. Technical requirements are governed by Purchase Description WP-PD-26-02 and specific design diagrams, requiring materials such as stainless steel and gold plating per MIL-DTL-45204, with covers in West Point Gray (Pantone Cool Gray 5 C). Award will be based on a lowest price source selection process where technical compliance is evaluated on a pass/fail basis. To be considered, offerors must submit one complete sample sword assembly and a two-yard fabric sample by the firm closing date of October 30, 2026. Final acceptance is subject to first article inspection and conformance sampling per ASQ/ANSI Z1.4 at West Point, NY. All items must include unique item identification in accordance with MIL-STD-130 and MIL-STD-129.
Metal Kitchen Cookware, Utensil, Cutlery, and Flatware (except Precious) Manufacturing

POSTED

3 days ago

DEADLINE

in 1 day
View Details
NAICS: 315990
New
Federal
SOURCES SOUGHT-U.S. Army United States Military Academy (USMA), Cadet Issued Breast and Waist Plates
Solicitation # W911SD-27-Q-A009
The U.S. Army is issuing a Sources Sought notice for the procurement of Cadet Issued Breast and Waist Plates for the United States Military Academy at West Point. This is an information and planning effort to determine if there are at least two qualified small businesses capable of fulfilling the requirement to support a small business set-aside. The anticipated contract structure consists of a base year plus four one-year option periods under NAICS code 315990 for Apparel Accessories and Other Apparel Manufacturing. The technical requirements specify that both the breastplates and waistplates must be manufactured from Yellow Brass 65/35 (UNS Alloy C-268) with mirror-like polished fronts and matte finish backs and edges. These items must adhere to MIL-B-1563, MIL-DTL-1563/12B for waistplates, and MIL-DTL-1563/13B for breastplates. Specific dimensions and thicknesses are required, and identification markings must be placed on the back of each buckle. Packaging must follow standard commercial guidelines, with each item wrapped and packed 50 units per box. Interested firms must provide their company details, small business status, and evidence of previous experience with similar requirements to facilitate a capability determination.
Apparel Accessories and Other Apparel Manufacturing

POSTED

3 days ago

DEADLINE

in about 11 hours
View Details

Earlier notices in this NAICS code

Posted before this notice, open and closed

Find Active Opportunities Like This

Get AI-powered intelligence on the opportunities still open

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS