Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, September 16 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Copper Cabling & Network Infrastructure Installation

Active

Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This contract involves the installation, termination, and testing of copper cabling systems, specifically Cat6 and Cat6a, used for data and voice network infrastructure. The scope includes structured cabling, setting up patch panels, and configuring network closets to support robust network connectivity. It is designated as a subcontract under a Total Small Business Set-Aside in accordance with FAR 19.5, aimed at supporting small businesses. The contract is issued by the Naval Air Warfare Center, part of the Department of Defense, under NAICS code 238220, which covers electrical contractors and other wiring installation contractors. Although specific location details and points of contact are not provided, the opportunity is publicly accessible through the given federal contracting portal. This contract represents a specialized networking infrastructure project critical to maintaining and enhancing military communication systems.

General Info

Installation and testing of Cat6/Cat6a copper cabling for military network infrastructure under small business set-aside.

Agency

Department Of Defense → Naval Air Warfare CenterView Agency

NAICS

238220 - Plumbing, Heating, and Air-Conditioning ContractorsView NAICS

Place of Performance

CA

Set-Aside

SBA

Documents

This scope was carved out of N6893625R0026.

The full solicitation package (5 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

Installation Fiber Optics Networking Support Services

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedMay 14

subcontract

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → Naval Air Warfare Center

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → Naval Air Warfare Center

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Installation, termination, and testing of copper cabling (e.g., Cat6, Cat6a) for data and voice networks, including structured cabling, patch panels, and network closet setup.

Similar Contracts

Same NAICS industry code

ICE 8A - Ft Benning Improvements

Solicitation # 70CMSW25R00000011

Solicitation 70CMSW25R00000011 is a firm-fixed-price task order issued under an 8(a) Multiple Award Construction Contract (MACC) for design-build services to support the Immigration and Customs Enforcement (ICE) Office of Firearms and Tactical Programs at Fort Benning, Georgia. The project, valued between 4.0 million and 4.5 million dollars, focuses on life, safety, and operational improvements. The scope of work includes the installation of two aluminum awnings at the shipping and receiving dock and Fiske Range Lane 2, turf replacement at Fiske Range, the demolition of Building 2294, gutter and drainage improvements for Building 234, commercial HVAC services and replacements, and general facility improvements for Building 301 and the DAGr Team facility. The period of performance is 365 days from the date of award. Award will be based solely on the lowest total evaluated price, provided the offeror demonstrates a sound technical approach, appropriate design resources, and a comprehensive quality control and safety program. The contract is subject to the Davis-Bacon Act, requiring prevailing wage rates and specific paid sick leave for workers. Performance and payment bonds are required per FAR 52.228-15. Proposals must be submitted in two volumes: a technical and safety volume and a pricing volume using the provided template. All payment requests must be processed electronically via the Invoice Processing Platform and accompanied by certified payroll.

Bristol Alliance of Companies

POSTED

about 8 hours ago

DEADLINE

PIDC Project 3 - Dorm RTU Replacement and SCADA

Solicitation # 872287

This firm-fixed-price task order, issued under an 8(a) MACC IDIQ, involves the replacement and upgrade of Rooftop HVAC Units (RTUs) for the Alpha, Bravo, Charlie, and Delta dorms, as well as a SCADA system upgrade at the Port Isabel Detention Center in Los Fresnos, Texas. The project objective is to replace corroded and obsolete equipment with high-quality, coastal weather-resistant, and durable systems that exceed commercial standards. The scope includes removing existing RTUs, replacing necessary piping, electrical, and ducting, and installing new SCADA software and two chemical feed pumps in compliance with Texas Commission of Environmental Quality standards. The estimated magnitude of the project is between 1.2 million and 1.5 million dollars, with a period of performance of 365 days from the date of award. Award will be based solely on the lowest total evaluated price, provided the offeror demonstrates a sound technical approach, appropriate design resources, and a comprehensive quality control and safety program. Key requirements include the submission of a Quality Control Plan, a safety plan, and the designation of a Project Manager with at least five years of relevant federal contracting experience. The contractor must also provide a one-year warranty for installation and craftsmanship and ensure all personnel pass required background checks for site access. Compliance with the Davis-Bacon Act and associated executive orders regarding wages and sick leave is mandatory. All payment requests must be submitted electronically via the Invoice Processing Platform and accompanied by certified payroll.

Bristol Alliance of Companies

POSTED

about 8 hours ago

DEADLINE

Packaged HVAC Unit Replacement - Bldg 1091

Adams & Associates, Inc.

POSTED

about 8 hours ago

DEADLINE

RFQ7593 Smoke Detector Installation

Solicitation # RFQ7593

Management & Training Corporation (MTC) is soliciting bids for a fee-for-service subcontracting opportunity to provide smoke detector installation and fire system services at the Sierra Nevada Job Corps Center in Reno, Nevada. The scope of work requires the replacement of 43 smoke detectors across specific dormitory rooms, including 12 detectors in rooms 11, 15, and 18, 12 detectors in room 19, and 19 detectors in rooms 20 and 21. The contractor must ensure all installed detectors communicate with the fire panel and that all work adheres to NFPA standards and local Authority Having Jurisdiction requirements. Bids must be submitted via email to Tom Williams by 3:00 PM PST on September 18, 2026. To be considered, applicants must provide a completed bid sheet, proof of insurance, and a supplier packet containing a W-9, self-certification form, and acceptance of terms and conditions. This opportunity is open to various small business set-asides, including SDB, WOSB, HUBZone, and Veteran-Owned businesses, under NAICS code 238220. Award decisions will be based on the best value as determined by MTC. The contract mandates compliance with Service Contract Labor Standards and Wage Determination No. 2015-5595 Revision 28 for labor rates in Washoe and Storey counties. Additionally, subcontractors must provide a 12-digit Unique Entity ID and certify their debarment status under FAR 52.209-6 if the subcontract exceeds 30,000 dollars. Strict adherence to government and Department of Labor guidance regarding the protection of sensitive and proprietary information is required.

Sierra Nevada Job Corps Center

POSTED

about 8 hours ago

DEADLINE

2026-Clearfield-Bldg E8 Welding HVAC

Solicitation # 2026- Clearfield- Welding Bldg. E8 HVAC Replacement

Management & Training Corporation is seeking fixed-price lump sum bids for a subcontracting opportunity to replace the HVAC system at Building E8 Welding within the Clearfield Job Corps Center in Clearfield, Utah. The scope of work includes the complete change-out of the existing motor, installation of wiring, conduit, disconnects, breakers, fuses, and starters, and the subsequent validation of voltage, phase, and grounding. Deliverables include startup and testing documentation, onsite training for maintenance personnel, and the provision of manufacturer O&M manuals. All work must adhere to OSHA requirements, federal, state, and local codes, and site safety procedures. Bids must be submitted via email to nelson.dar@jobcorps.org and patricia.willover@mtctrains.com by September 19, 2026, at 3:00 PM MST. To be considered for award based on overall best value, offerors must complete a physical site visit, provide a detailed bid breakout on company letterhead, and submit a bid bond guarantee. The project is a small business set-aside under NAICS 238220 and requires compliance with Davis-Bacon prevailing wage determinations for Davis County. Awardees must provide a UEI number, submit a Schedule of Values for invoicing via AIA G702/G703 forms, and provide original payment and performance bonds from a surety with at least an A- rating within five business days of an Intent to Award letter. Performance dates will be established upon the signing of a Notice to Proceed.

Management & Training Corporation

POSTED

about 8 hours ago

DEADLINE

CBP7664 Wellness HVAC Compressor Replacement

Solicitation # CBP7664

Management & Training Corporation is seeking bids for a subcontracting opportunity to replace a failed HVAC/refrigeration compressor at the Wellness facility of the Sierra Nevada Job Corps Center in Reno, Nevada. This fixed-price, single lump sum contract requires the contractor to provide all labor, materials, and equipment to execute a five-phase process including preparation, demolition, installation of an OEM-specified compressor, system testing and commissioning, and final closeout. The project must restore full cooling capacity and operational efficiency while adhering to EPA Section 608 regulations for refrigerant recovery. The work must be completed within thirty consecutive business days following the receipt of a written Notice to Proceed. Bids will be evaluated based on overall best value, considering price, quality, and delivery schedule. The estimated price range is between 0 and 25,000 dollars, though bids equal to or greater than 25,000 dollars require a 20 percent bid bond guarantee and subsequent performance and payment bonds from an A-rated surety company. Submission requirements include a bid sheet, proof of insurance, three comparable project references, and a completed supplier packet containing a W-9 and self-certification of business size under FAR 52.219-8. Contractors must comply with Davis-Bacon Act prevailing wage rates for Washoe County and adhere to FAR 52.204-10 reporting if the award reaches 40,000 dollars. Final payment is contingent upon a successful final inspection and the submission of a notice of final completion, certified payroll reports, and operation and maintenance manuals.

Sierra Nevada Job Corps Center

POSTED

about 8 hours ago

DEADLINE

Replace Shower Diverters in two (2) Dorms

Solicitation # replace-shower-diverters-two-2-dorms

This project involves the removal and replacement of shower diverters in eight bathrooms across two dorm buildings in Indiana. The scope of work includes replacing existing Powers brand systems with Delta or comparable models featuring readily available parts, as well as repairing or replacing any piping in poor condition leading into the diverters. The solicitation is open to various small business set-asides, including SDB, WOSB, HUBZone, and SDVOSB. Proposals must be submitted via email to Tammy Swallows at Atterbury Job Corps by September 14, 2026, at 3:00 PM. A site visit was scheduled for September 1, 2026.

Adams & Associates

POSTED

about 8 hours ago

DEADLINE

This is a subcontracting opportunity to replace a chiller in McKinney, TX.

Solicitation # subcontracting-opportunity-replace-chiller-mckinney-tx

Serrato Corporation is seeking bids for a subcontracting opportunity to replace a failing air-cooled chiller at the North Texas Job Corps Center, specifically within Building 214/215 in McKinney, Texas. The scope of work includes the demolition and disposal of the existing chiller, the installation and startup of a new air-cooled chiller, and the integration of building automation controls using a JACE 9000 central integration point. Additionally, the contractor is responsible for installing three-way control valves at four air handling units, replacing VFDs, performing AHU cleaning and inspection, and ensuring all wiring is plenum-rated. Bids must be submitted by September 18, 2026, and quotes must remain valid for 90 days. Required submission documentation includes manufacturer equipment specifications, a Certificate of Liability Insurance naming Serrato Corporation as the holder, and Form 1413 for Davis-Bacon Act certified payroll compliance for work exceeding 2,000 dollars. Insurance requirements include a minimum of 500,000 dollars for Employers Liability and 1,000,000 dollars per occurrence for Commercial General Liability. The project is set aside for various small business categories, including SDB, WOSB, HUBZone, VOSB, and SDVOSB. Primary points of contact for this solicitation are Stacy Smith and Roy Henderson.

Serrato Corporation DBA North Texas Job Corps

POSTED

about 8 hours ago

DEADLINE

AAL-0880-02 HVAC and Electrical Upgrades Fairbanks

Solicitation # AAL-0880-02

Solicitation AAL-0880-02 is a presolicitation for HVAC and electrical upgrades at the Fairbanks FSS facility in Alaska, with an estimated construction magnitude between 250,000 and 500,000 dollars. The scope of work includes the replacement of the Fairbanks FSS chiller, four AC units, chilled-water piping, and all associated electrical systems. To maintain operations during construction, the contractor must provide temporary and redundant cooling and perform modifications to Panel P1 and various HVAC circuits. The project is scheduled for a proposed start date of April 15, 2027. Final deliverables include the completion of startup, testing, commissioning, and punch-list work, as well as providing FAA training and project closeout. This opportunity is set aside for small businesses, including SDB, WOSB, HUBZone, VOSB, SDVOSB, and Alaskan small businesses, under NAICS code 238220. Interested firms should contact Masanori Akers, the Parsons Subcontract Administrator, for further information.

PTSI Managed Services Inc.

POSTED

about 8 hours ago

DEADLINE

Main Building 1 Wing 5 – Six Rooftop HVAC Unit Replacement – Glenmont Job Corps Center

Solicitation # S26-010

The Glenmont Job Corps Center is soliciting proposals from qualified, New York State licensed contractors for the replacement and installation of HVAC equipment within Main Building No. 1, Wing 5 (Education Building) in Glenmont, New York. The project involves replacing two 7.5-ton split-system units for the auditorium, one 6-ton rooftop unit for the library and computer lab, and one 12.5-ton rooftop unit for the north and east wing classrooms. Additionally, the scope includes installing four 2-ton ductless mini-split heat pump systems, removing a window air-conditioning unit, and abandoning two 5-ton rooftop units in place. Comprehensive associated work encompasses demolition, roof curbs and penetrations, ductwork, refrigerant and condensate piping, electrical work, controls, structural roof evaluations, and fire alarm and duct smoke detector installations, concluding with testing, balancing, and commissioning. This solicitation is set aside for various small business categories, including SDB, WOSB, HUBZone, and Veteran-Owned Small Businesses. The project must be completed within 210 calendar days following the written Notice to Proceed, and the facility will remain operational throughout the construction period. Key deadlines include a pre-proposal site walkthrough on September 10, 2026, with vendor questions due by September 14, 2026. Final proposals must be submitted by September 21, 2026, at 4:00 PM ET. All work must comply with applicable New York State codes, safety regulations, and environmental requirements.

Adams and Associates, Inc.

POSTED

about 8 hours ago

DEADLINE

Replace HVAC Systems in the following buildings on our campus –1.) 1091 – Glazing/Welding/Heavy Mechanics Bldg

Solicitation # 26-140

This project involves the replacement of a pad-mounted gas-fired packaged HVAC unit at the Glazing, Welding, and Heavy Mechanics Building (1091) in Indiana. The existing 10-ton Carrier unit, which utilizes R-22 refrigerant, will be replaced with a new 12.5 SEER packaged unit using non-R22 refrigerants such as R-410A or R-454B. The scope of work requires the reuse of existing ductwork, electrical disconnects, and thermostat wiring. Following installation, the old unit and any recovered refrigerant must be labeled and left at the maintenance building for parts and reuse. The solicitation is managed by Adams and Associates, Inc., with a response deadline of October 5, 2026. This opportunity is set aside for various small business categories, including Small Disadvantaged, Women-Owned, HUBZone, and Veteran-Owned businesses. Interested parties should contact Tammy Swallows for further information regarding this NAICS 238220 project.

Adams & Associates, Inc.

POSTED

about 8 hours ago

DEADLINE

Replace HVAC Systems in the following buildings on our campus –1.) ABL Dormitory

Solicitation # 26-141

This subcontracting opportunity, managed by Adams & Associates, Inc. for the U.S. Department of Labor, involves the replacement of HVAC systems at the Atterbury Job Corps Center ABL Dormitory in Indiana. The project requires replacing existing R-22 Bryant condensing units and coils serving common areas and dormitory wings A, B, C, and D with new 12.5 SEER packaged units utilizing non-R22 refrigerants such as R-410A or R-454B. The contractor is expected to reuse existing electrical disconnects, ductwork, and thermostat wiring, and must label and leave all recovered refrigerant on-site. Bidders must attend a mandatory site visit on September 23, 2026, and submit a single lump sum proposal by October 5, 2026. Award will be based on best value, evaluating price (60 points), quality (20 points), past performance (10 points), and schedule (10 points). Eligible vendors must maintain an active SAM.gov registration and a Unique Entity ID, hold a valid Indiana Contractor's License, and provide proof of specific automobile and workers' compensation insurance. Compliance with EPA, OSHA, and Davis-Bacon Act wage determinations is mandatory. Final payment is subject to Net 30 terms and is contingent upon the submission of a completed SF 1413, certified payroll records, and the release of liens from all subcontractors and material suppliers.

Adams & Associates, Inc.

POSTED

about 8 hours ago

DEADLINE

More opportunities from Department Of Defense → Naval Air Warfare Center

Same awarding agency

Intelligence Exploitation and Targeting Systems (IETS)

Solicitation # N6893626R5010

The Naval Air Warfare Center Weapons Division at China Lake, CA, is soliciting an Indefinite Delivery Indefinite Quantity (IDIQ) Multiple Award Contract (MAC) on a full and open competitive basis for the development, fielding, and sustainment of Intelligence Exploitation and Targeting Systems (IETS). This follow-on effort focuses on IETS derived from the Common Geo-Positioning (CGS) software package and related hardware used in the Distributed Common Ground System Navy (DCGS) family of programs. The solicitation, numbered N6893626R5010, is managed through the PIEE Solicitation Module, and all submissions must be received via that platform. Due to the nature of the work, contractors must be certified through Defense Logistics Information Services (DLIS) to access Controlled Unclassified Information (CUI) or Export Controlled Information. The scope of work includes software development and management activities, with key deliverables such as Software Design Descriptions, Interface Design Descriptions, and an Operations Security (OPSEC) Plan. Deliverables are governed by specific Data Item Descriptions (DIDs) and are submitted according to individual task orders. The government maintains a 30-day review period for data items, with contractors required to resubmit corrections within 15 days of receiving comments. Amendment 0001 extended the response deadline to October 8, 2026, and updated the RFP questions and responses. Offerors are required to provide comprehensive past performance data, business systems status checklists, and small business goal reports as part of their proposal submission.

Research and Development in the Physical, Engineering, and Life Sciences (except Nanotechnology and Biotechnology)

POSTED

DEADLINE

Automotive Upfitting and Conversion Services

General Automotive Repair

POSTED

DEADLINE

Specialized EOD Service Body Supplier

Industrial Truck, Tractor, Trailer, and Stacker Machinery Manufacturing

POSTED

DEADLINE

Acetal Copolymer Plastic

Solicitation # N6893626Q5194

Solicitation N6893626Q5194 is a firm-fixed-price request for quotes issued by the Naval Air Warfare Center Weapons for the procurement of custom-cut black acetal copolymer plastic. The requirement consists of 400 pieces of 3/8 inch by 24 inch by 46 inch material and 160 pieces of 3/8 inch by 48 inch by 48 inch material. Technical specifications require the 24 inch by 46 inch pieces to maintain a tolerance of plus or minus 0.125, and all materials must feature smooth, burr-free edges and be packaged residue-free. The delivery date for all items is September 30, 2026, with inspection and acceptance occurring at the destination in Point Mugu, California. The acquisition is unrestricted, though a price evaluation preference is granted to HUBZone small business concerns and other successful small businesses. Award will be granted to the responsible offeror deemed most advantageous to the government based on price and other factors. Contractors must utilize the Wide Area Workflow for invoicing and comply with various federal regulations, including MIL-STD-129 and MIL-STD-130 for marking and identification, as well as DFARS requirements for cybersecurity and domestic sourcing. The response deadline has been extended to September 22, 2026.

Plastics Material and Resin Manufacturing

POSTED

DEADLINE

Response Vehicle Conversions

Solicitation # N6893626Q5199

The Naval Air Warfare Center Weapons Division at China Lake, California, is seeking quotes for the procurement of two Knapheide Service Body PN 696-2-M units or an approved equal. This requirement is being conducted as a full and open competition under FAR Parts 12 and 13, with detailed specifications provided in Section C of the solicitation. Interested parties should submit their quotes to Donell Sims via email. The solicitation, identified by number N6893626Q5199, was posted on September 9, 2026, with a response deadline of September 18, 2026. To be eligible for award, all responsible sources must maintain an active registration in the System for Award Management (SAM) database, including the submission of a signed, notarized letter identifying the authorized Entity Administrator.

Motor Vehicle Body Manufacturing

POSTED

DEADLINE

Solicitation # N6893626SIMACQDC00000EC000000218

The Naval Air Warfare Center Weapons Division intends to award a firm-fixed-price contract on a sole source basis to AJ's Power Source, Inc. for two PG1500-UPS units and associated cables. These tactical UPS units are required because they meet specific physical and power load calculations and hold the necessary NSWC certification for use on USN vessels. The units will be used for evaluation and comparative testing to establish a baseline for a system prototype. This notice is an intent to sole source and not a request for quotes. Interested parties wishing to demonstrate their capability to perform the work must respond by 10AM PST on September 14, 2026, referencing solicitation number N6893626SIMACQDC00000EC00000218. All vendors must maintain an active registration in SAM.gov and be certified through Defense Logistics Information Services to access controlled unclassified or export controlled information.

All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

DEADLINE

KeysightCare Software and Support ProviderThis subcontract, titled KeysightCare Software and Support Provider, is issued by the Naval Air Warfare Center under the Department of Defense. The primary objective is to provide prime contractors on Department of Defense test equipment projects with essential operating systems, specialized software licenses, and comprehensive support services. Specifically, the contract covers the delivery of Windows 11 IoT LTSC operating systems and KeysightCare software licenses, ensuring all software is properly installed, activated, and backed by a formal support service agreement. The opportunity falls under NAICS code 541512 and was posted on September 2, 2026, with a response deadline of September 14, 2026. This procurement focuses on the critical integration of software and technical support to maintain the functionality of specialized test equipment used within defense operations.

Computer Systems Design Services

POSTED

DEADLINE

Keysight UXA Signal Analyzer SupplierThis subcontract with the Naval Air Warfare Center involves the supply of a Keysight UXA Signal Analyzer Model N9042B and associated hardware accessories for prime contractors working on Department of Defense projects. The equipment features a frequency range of 2 Hz to 50 GHz, a 2 GHz analysis bandwidth, and a 50 GHz Preamplifier. To ensure compliance with Department of Defense Item Unique Identification requirements, all items must be marked using ISO/IEC 16022 two-dimensional data matrix symbology. The final delivery requires the analyzer unit along with a completed Material Inspection and Receiving Report.

Computer and Computer Peripheral Equipment and Software Merchant Wholesalers

POSTED

DEADLINE

Keysight UXA Signal Analyzer, KeysightCare Software & Accessories

Solicitation # N6893626Q5203

The Naval Air Warfare Center, Weapons Division at China Lake, California, is seeking to procure a Keysight UXA Signal Analyzer along with KeysightCare software and accessories under solicitation number N6893626Q5203. This procurement is a firm fixed price order and is designated as a women-owned small business set-aside. While the equipment is a manufacturer sole source to Keysight Technologies Inc., the Navy is allowing competition among authorized distributors. Interested vendors must be registered and active in the System for Award Management and certified through Defense Logistics Information Services to access controlled unclassified information. A critical requirement for this award is the vendor's ability to complete duty free entry requirements. The solicitation was posted on September 2, 2026, with a response deadline of September 14, 2026. Inquiries and responses should be directed to the primary point of contact, Yvonne Stockwell.

Instrument Manufacturing for Measuring and Testing Electricity and Electrical Signals

POSTED

DEADLINE

IETS Technical Study and Performance Reporting

Administrative Management and General Management Consulting Services

POSTED

DEADLINE

OPSEC Planning and Compliance

Other Scientific and Technical Consulting Services

POSTED

DEADLINE

IETS Technical Manual and User Guide Development

Administrative Management and General Management Consulting Services

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 650+ contractors already using CLEATUS