This Government Contract opportunity from Government of Canada was posted on June 5, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

Custom Workstation Furniture Layout and Installation

Closed

International

Submission Closed06/15/2026, 07:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 238220

New

Federal

HVAC Repair by Replacement (13 Units)The U.S. Army’s Mission and Installation Contracting Command at Fort Bliss, Texas, is preparing to award a firm-fixed-price contract for the replacement of thirteen existing Carrier rooftop HVAC units with new TRANE units of equivalent capacity at Building 1611. The contractor must supply all labor, materials, equipment, tools, transportation, and supplies required to complete the work within 270 days after notice to proceed. This is a total small business set-aside under NAICS code 238220, with a size standard of $19 million, and the estimated contract value falls between $1 million and $5 million. The contractor must comply with the FAR clause 52.219-14(e)(3) limitation on subcontracting, which restricts payments to non-similarly situated subcontractors to no more than 85 percent of the total contract value, excluding material costs. All subcontracted work by similarly situated entities counts toward this limit. The solicitation is expected to be released on or about July 21, 2026, with a pre-bid conference planned for July 30, 2026, at 9:00 a.m. MST, followed by a site visit. Questions must be submitted via email to Silvia Kane no later than August 6, 2026. Bids are due by August 21, 2026, and all offerors must be actively registered in the System for Award Management (SAM.gov) at the time of submission. All solicitation documents, including plans and specifications, are available exclusively through the Contract Opportunities page on SAM.gov, and no paper copies will be provided. Amendments, if any, will be posted online only, and it is the offeror’s responsibility to monitor the site regularly. The government is not liable for any losses due to website inaccessibility or third-party information.

POSTED

DEADLINE

BEQ IAQ Monitor System Bldgs HP295 & WC195Only Mechanical MACC Contractors listed on the General Requirements cover page are eligible to submit proposals for the BEQ IAQ Monitor System project at Buildings HP295 and WC195 at Camp Lejeune, North Carolina. The solicitation, numbered N4008526R9058, is a total small business set-aside under NAICS code 238220 and is open exclusively to small businesses as defined by the SBA. The project requires installation of an indoor air quality monitoring system, with detailed scope and drawings provided in the attached documentation. Proposals must be submitted by the deadline of August 12, 2026, at 6:00 PM Eastern Time, and the contract is being managed by the Department of Defense through NAVFACSYSCOM Mid-Atlantic, based in Norfolk, Virginia. Primary point of contact is Brandi Porche, with Lauren Loconto as the secondary contact, both reachable via phone or email for further inquiries.

Navfacsyscom Mid-Atlantic

POSTED

DEADLINE

Z--Replacement of 3 HVAC Systems, TN and KYThis solicitation, numbered 140P5126Q0045, is a firm fixed price contract issued by the Department of the Interior under the Big South Fork National River and Recreation Area for the cyclic replacement of three HVAC systems across facilities in Tennessee and Kentucky, specifically at the Kentucky Ranger Station, Park Headquarters, Bandy Creek Facilities, and the PM Building in Oneida, TN. The procurement is strictly a total small business set-aside under NAICS code 238220, with an estimated ceiling of $19 million, and requires all offerors to be registered in the System for Award Management (SAM) prior to award and throughout performance. The work involves full removal of existing units, installation of new packaged units and split-system heat pumps meeting a minimum 14 SEER efficiency or current DOE standard, use of R-410A or equivalent refrigerant, and completion of all electrical connections, refrigerant line sets, condensate drainage, and sealed penetrations. The contractor must ensure continuous cooling for the IT room, conduct full startup and testing, and comply with the National Electrical Code, manufacturer specifications, and applicable state and federal safety, environmental, and historic preservation regulations including OSHA, EPA, NHPA, and NEPA. Proposals must be submitted via email to Ashley Warcewicz by 5:00 PM EDT on July 23, 2026, with vendor questions due by July 10, 2026, and a mandatory site visit scheduled for July 15, 2026, at 1 PM EDT at Park Headquarters. Offerors must include documentation of technical capability, warranty terms, pricing, payment information, past performance references, and completed FAR 52.212-3 representations. The government will evaluate proposals on a lowest price technically acceptable basis, where technical capability is a pass/fail gate—only technically acceptable offers proceed to price evaluation. Performance must be completed within 45 calendar days of Notice to Proceed, with work anticipated between July and August 2026. Contractors are required to carry liability insurance covering both themselves and the United States, comply with all BISO security and parking protocols, maintain clean worksites daily, and adhere to strict invoicing procedures through the Treasury’s Invoice Processing Platform after COR approval. The contract includes numerous incorporated FAR clauses on whistleblower rights, anti-kickback procedures, subcontractor restrictions, employment eligibility verification, and prohibition of inverted

Ser North Mabo (53000)

POSTED

DEADLINE

INSTALL A/C UNIT, HAZARDOUS STORAGE FOR LABORATORY, DFSP HACHINOHE, JAPAN

Navfacsyscom Far East

POSTED

DEADLINE

HVAC Replacement and Modernization of Controls - Owings Mills, MDThis contract entails the removal and replacement of the HVAC system along with modernization of building controls at the SSG Isadore S. Jachman United States Army Reserve Center located at 12100 Greenspring Avenue, Owings Mills, Maryland. The requirement is a total small business set aside under NAICS code 238220 with a size standard of $19 million, and must be performed by a qualified small business. The work is to be executed under a Firm Fixed Price arrangement with a 270-day period of performance beginning upon notice to proceed, and is subject to the availability of funds as outlined in FAR 52.232-18. The acquisition follows FAR Part 12 procedures for commercial services with applicable construction provisions from FAR Part 36 and DFARS Part 236, and will be awarded using the lowest price technically acceptable methodology to a responsible offeror whose quote is both technically acceptable and offers the lowest fair and reasonable price. All submissions must include a completed Standard Form 1442, the Construction Cost Breakdown Form in Microsoft Excel with functional formulas, active SAM registration, compliance with the Davis-Bacon wage determination, and full line-item pricing. Bonding requirements vary based on the quoted amount: no payment protection is needed for quotes at or below $35,000; payment protection is required for quotes between $35,000 and $150,000; and both performance and payment bonds equal to 100% of the award price are mandatory for quotes above $150,000, along with a bid guarantee of 20% of the quote price or $3 million, whichever is less. Quotes must be submitted by July 23, 2026, via email to the contracting officer and contract specialist, and failure to meet any compliance criteria—including missing documentation, nonfunctional spreadsheets, or inactive SAM registration—may lead to automatic rejection. Site visits are optional but strongly recommended, and all questions must be submitted in writing by July 17, 2026. Offers remain valid for 120 days, and the government reserves the right to cancel if funds are not made available.

POSTED

DEADLINE

FACZG Chiller Maintenance Contract

POSTED

DEADLINE

HVAC Repair by Replacement (6 Units)The U.S. Army’s Mission and Installation Contracting Command at Fort Bliss, Texas, plans to award a firm-fixed-price contract for the replacement of six existing Carrier rooftop HVAC units with new TRANE units of equivalent capacity at Building 1611. The contractor will be responsible for providing all labor, materials, equipment, tools, transportation, and supplies necessary to complete the project in accordance with the specifications, with work expected to be finished within 270 days after notice to proceed. This procurement is designated as a total small business set-aside under NAICS code 238220, with a size standard of $19 million, and the estimated contract value falls between $1 million and $5 million. A strict limitation on subcontracting applies, prohibiting the prime contractor from paying more than 85 percent of the contract value, excluding material costs, to subcontractors that are not similarly situated small businesses, with any further subcontracts by similarly situated entities counted toward this cap. The solicitation is anticipated to be released around July 21, 2026, with a pre-bid conference scheduled for July 30, 2026, followed by a site visit. All inquiries must be submitted by August 6, 2026, to the designated point of contact. Bids are due by August 21, 2026, and all offerors must be actively registered in SAM.gov at the time of submission. All contract documents, including plans and specifications, are accessible exclusively through the SAM.gov Contract Opportunities page, and amendments will be posted there only. The government does not provide paper copies, nor is it liable for any accessibility issues with the website or for information obtained from unofficial sources.

POSTED

DEADLINE

Carbon tank exchange and water testing

Defense Health Agency

POSTED

DEADLINE

Safety Shower and Eyewash Corrections Phase 1The Department of Commerce’s National Institute of Standards and Technology (NIST) is seeking a small business contractor to perform Design-Build services for corrective upgrades to emergency eyewash and safety shower systems across its Boulder, Colorado campus, under solicitation 1333ND26RNB190015. The project centers on bringing non-compliant fixtures into alignment with ANSI Z358.1-2014 standards, with Building 22 designated as the base scope and four option CLINs covering Buildings 25, 42 (Central Utility Plant), 1, and 2. The contractor must evaluate existing conditions, develop engineered designs, coordinate extensively with NIST staff and building occupants to minimize operational disruption, and execute construction while protecting sensitive equipment and infrastructure. All work must adhere to NIST’s Site Standard Specifications and General Contractor Requirements, including strict security protocols requiring visible identification badges for all personnel due to the restricted nature of the campus. The contract is a total small business set-aside under NAICS code 238220 and will be awarded as a Firm-Fixed-Price contract based on best value, with technical approach, key personnel qualifications, and schedule feasibility prioritized over price. The contractor must demonstrate an ability to mobilize within 10 calendar days of notice to proceed and complete all work within 180 calendar days, with an estimated notice to proceed date of August 15, 2026. Proposals must include a detailed Plan of Approach not exceeding 20 single-sided pages with specific content on means and methods, material data, proposed schedules, quality control, safety procedures, a communications diagram, and a comprehensive list of subcontractors. Price proposals require fully completed SF 1442 forms with detailed labor, material, overhead, and profit breakdowns. Key personnel requirements mandate a Project Manager with ten years’ experience on similar projects, a Site Superintendent capable of managing utility outages within an eight-hour limit during site shutdowns, and a Safety Manager with OSHA 30-hour certification and five years of safety-specific experience. The contractor must also provide performance and payment bonds, maintain required insurance per FAR clauses, comply with Buy American specifications, and adhere to U.S. Army Corps of Engineers safety standards for fall protection. All invoices must be submitted electronically to invoice@nist.gov with precise formatting including contract number, CLIN, UEI, and detailed line-item descriptions. Offerors must maintain active SAM registration with accurate small

Department Of Commerce Nist

POSTED

DEADLINE

REPLACE SANITARY SEWER RF HOUSE 52C

POSTED

DEADLINE

Provide and Install Two Hot Water Heaters

POSTED

DEADLINE

HVAC and Ventilation SystemThe contract pertains to the installation of exhaust fans, ventilation ducts, or a small HVAC unit designed to ensure proper air quality within the brinemaker shed, a facility likely used for processing or storing brined products. This work falls under NAICS code 238220, classifying it as a subcontract for HVAC installation services, with the Texas Department of Transportation as the overseeing agency through its Texas office. The solicitation was posted on July 21, 2026, and responses are due by September 2, 2026, at 6:00 PM, indicating a targeted procurement timeline for this specialized ventilation upgrade. The place of performance and office address details are unspecified, but the effort is tied to a specific Texas-based facility under the agency's jurisdiction. The contract emphasizes functional air quality control, suggesting compliance with safety or operational standards for the brinemaker shed’s environment.

Texas Department of Transportation

POSTED

1 day ago

DEADLINE

in about 1 month

AI Contract Overview

The contract entails the supply, delivery, and installation of custom-designed Customer Service Officer workstations at the Gerrard Square Service Canada Centre in Toronto. The project includes fully integrated components such as panel walls, desks, monitor arms, and comprehensive cable management systems tailored to meet specific operational and ergonomic requirements. All materials and installations must comply with federal standards for workplace functionality, durability, and safety, ensuring seamless integration into the existing office environment. The work is classified under NAICS code 238220, indicating it falls under specialized construction services for office fit-outs. The contract is issued as a subcontract under the Government of Canada’s Department of Employment and Social Development, with a response deadline of June 15, 2026, and a posted date of June 5, 2026. While no set-aside details are indicated, the procurement is part of a broader initiative to modernize service delivery infrastructure. Successful bidders will be expected to manage all aspects of logistics, on-site installation, and compliance with government specifications without disruption to ongoing centre operations. The project requires precise coordination, adherence to timelines, and quality control to meet the federal employer’s service standards.

General Info

Supply and install custom ergonomic workstations for Service Canada Centre, Toronto, by June 15, 2026.

Agency

Government of Canada → Department of Employment and Social DevelopmentView Agency

NAICS

238220 - Plumbing, Heating, and Air-Conditioning ContractorsView NAICS

Place of Performance

Toronto, CAN

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PhaseClosed

PostedJun 5

subcontract

Response DeadlineJun 15

Deadline has passed

Submission Closed

06/15/2026, 07:00:00 PM UTC

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyGovernment of Canada → Department of Employment and Social Development

ContactsNo contacts available

OfficeN/A

Organization / Agency

Government of Canada → Department of Employment and Social Development

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Supply, delivery, and installation of custom-designed CSO workstations including panel walls, desks, monitor arms, and cable management systems at Gerrard Square Service Canada Centre.