This Government Contract opportunity from Government of Canada was posted on June 19, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

Extended Warranty Service Package

Closed

International

Submission Closed07/21/2026, 07:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 811310

New

RFQ#3857 Replace Walk-In Cooler and Freezer Doors

Solicitation # RFQ#3857

Management & Training Corporation (MTC) is soliciting quotes under RFQ#3857 for a subcontracting opportunity to replace three walk-in refrigeration doors at the Charleston Job Corps Center in Charleston, West Virginia. The scope of work requires the contractor to provide all labor, materials, equipment, and supervision to remove and dispose of existing units and install one walk-in cooler door and two walk-in freezer doors, including all necessary hinges, latches, gaskets, closers, and thresholds. The objective is to restore operational functionality, maintain temperature integrity, and improve energy efficiency. All work must comply with OSHA safety requirements and applicable building and refrigeration industry standards, with a minimum one-year workmanship warranty required for all installation labor. This is a fee-for-service, lump sum contract open to various small business set-asides, including SDB, WOSB, HUBZone, VOSB, and SDVOSB, under NAICS code 811310. Bids must be submitted by September 28, 2026, and must include a bid sheet, proof of insurance, three references for similar projects, and a completed supplier packet containing a W-9 and self-certification form. Award decisions will be based on best value. The contract is subject to Service Contract Labor Standards under Wage Determination 2015-4347 and incorporates various FAR clauses, including those regarding the Buy American Act, combating trafficking in persons, and reporting executive compensation for awards of $40,000 or more. Invoicing is to be submitted on a weekly or bi-weekly basis and must include a valid purchase order number.

Management & Training Corporation

POSTED

DEADLINE

Rationale Oven Specialist ServicingThis subcontract opportunity involves providing specialized servicing and repairs for Rationale brand ovens to support prime contractors on projects for the Gloucestershire County Council. The scope of work focuses on brand-specific technical maintenance and the replacement of parts to ensure the delivery of certified operational equipment. The contract is categorized under NAICS code 811310 and was posted on September 18, 2026. Interested parties must submit their responses by the deadline of October 16, 2026, at 11:00 AM.

Gloucestershire County Council

POSTED

DEADLINE

Commercial Kitchen Equipment ServicingThis subcontract for Commercial Kitchen Equipment Servicing involves providing essential repair and maintenance services for kitchen equipment across Gloucestershire County Council projects, specifically targeting corporate sites and schools. The scope of work includes general equipment repairs and specialized canopy cleaning to ensure all commercial kitchen facilities remain functional and hygienic. The opportunity was posted on September 18, 2026, with a response deadline of October 16, 2026. Operating under NAICS code 811310, the contract is managed by the Gloucestershire County Council and is intended for providers capable of delivering high-standard technical servicing to prime contractors.

Gloucestershire County Council

POSTED

DEADLINE

Lift ServicingThis subcontract for Gloucestershire County Council involves the provision of statutory servicing, reactive repairs, and remedial works for lift systems. The primary objective is to ensure lift safety and regulatory compliance through routine maintenance and emergency repair services, resulting in fully serviced and certified systems. The opportunity was posted on September 18, 2026, with a response deadline of October 16, 2026. Classified under NAICS code 811310, the contract is managed by Gloucestershire County Council and is intended for prime contractors operating on council projects.

Gloucestershire County Council

POSTED

DEADLINE

Fire Equipment Maintenance & ServicingThis subcontract for Fire Equipment Maintenance and Servicing involves the recurring inspection, testing, and repair of fire safety equipment for Broadacres Housing Association residential projects in North Yorkshire. The selected provider will be responsible for ensuring all firefighting units meet safety compliance standards and maintaining detailed electronic asset records to track equipment status. The contract requires specialized expertise in residential fire safety standards to deliver certified equipment and comprehensive maintenance reports. Interested parties must submit their responses by October 19, 2026, under NAICS code 811310.

Broadacres Housing Association

POSTED

DEADLINE

Emergency Generator Technical ServicesThe Emergency Generator Technical Services subcontract involves providing comprehensive maintenance for emergency generators at MCO and ORL airports for prime contractors working with the Greater Orlando Aviation Authority. The scope of work includes annual inspections, cleaning, calibration, testing, and necessary repairs or upgrades. Technical tasks encompass visual inspections of piping and manifolds, testing of batteries and jacket water heaters, and infrared testing of electrical components to ensure operational reliability. All services must adhere to strict industry standards, including NEMA, IEEE, ANSI, NFPA 70, and OSHA regulations. The contractor is responsible for delivering detailed annual service reports and ensuring all generator systems remain fully operational. This opportunity is categorized under NAICS code 811310, with a response deadline of October 9, 2026.

POSTED

DEADLINE

Emergency Generator and Fuel Delivery System "FDS" Testing, Maintenance and Repair Services

Solicitation # 26-506-ITN

POSTED

DEADLINE

CNC Installation and Training ServicesThe CNC Installation and Training Services subcontract with the Ottawa Carleton District School Board involves the delivery, technical setup, and calibration of CNC machines for school projects within the Supply Chain Management Division. The selected provider is responsible for the physical installation of equipment at designated school sites and must ensure all machines are fully operational. Beyond installation, the contract requires the provision of comprehensive operator training for both staff and students, as well as ongoing after-sales technical support. The provider must strictly adhere to the District's insurance and indemnity requirements to ensure compliance throughout the execution of the project.

Ottawa Carleton District School Board

POSTED

DEADLINE

Commercial Laundry Equipment Repair & MaintenanceThis subcontract opportunity is for the repair and maintenance of commercial laundry equipment at Department of Veterans Affairs facilities in Richmond, Virginia. The selected provider will perform preventative maintenance and corrective repairs on industrial machines, including the inspection and replacement of motors, belts, valves, and heating elements. Key deliverables include quarterly and annual maintenance checks, mechanical troubleshooting, and the submission of detailed service reports to ensure operational equipment. The contract is specifically set aside for Service-Disabled Veteran-Owned Small Businesses under NAICS code 811310. Qualified candidates must possess factory training or certification for major brands such as Speed Queen, Dexter, or Milnor. Interested parties must submit their responses by September 28, 2026, to the Network Contracting Office 6.

246-NETWORK Contracting Office 6 (36C246)

POSTED

DEADLINE

Hydraulic System Refurbishment (Loading & Ram)

Hq Usasoc Contracting

POSTED

DEADLINE

48--VALVE REGULATING SY, IN REPAIR/MODIFICATION OF

Solicitation # N0010426QYACP

This presolicitation notice from the Department of Defense, specifically Navsup Weapon Systems Support Mech, concerns the repair or modification of one regulating valve system under NSN 7H-4820-015869445. The government intends to solicit and negotiate with a single source under FAR 6.302-1 because it does not own the necessary data rights and has determined that purchasing such rights or reverse engineering the part is uneconomical. Delivery is specified as FOB Origin. Interested parties may submit proposals, quotations, or capability statements within 45 days of publication, or 30 days if awarded under an existing Basic Ordering Agreement. While the government is not currently using FAR Part 12 for commercial item acquisition, parties may notify the contracting officer of a commercial solution within 15 days. Standardized documents may be obtained via the DoD Single Stock Point, though specific patterns and drawings are not stocked there. This action may be subject to various Free Trade Agreements and the Buy American Act.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

16--TORQUE LIMITER ASSE, IN REPAIR/MODIFICATION OF

Solicitation # N0038326QBB23

This presolicitation notice, issued by the Navsup Weapon Systems Support under the Department of Defense, seeks the repair or modification of 133 torque limiter assemblies. The requirement is identified by NSN 7R-1680-015757642-GF and follows TDP version 001, with delivery terms specified as FOB Origin. The solicitation, numbered N0038326QBB23, was posted on September 18, 2026, with a response deadline of October 22, 2026. Interested parties should coordinate with the primary point of contact, Brett Killen, at the office located in Philadelphia, Pennsylvania.

Navsup Weapon Systems Support

POSTED

about 17 hours ago

DEADLINE

in about 1 month

AI Contract Overview

The contract requires the provision of a 36-month extended warranty for all 40 laundry units, covering both parts and labor, to ensure continuous operational support without additional cost to the Department of National Defence. Service and maintenance must be performed in Valcartier, Quebec, with the supplier responsible for timely response and resolution of all covered issues throughout the warranty period. The warranty is intended to minimize downtime and maintain the functionality of the laundry units critical to government operations. This subcontract, issued under NAICS code 811310, was posted on June 19, 2026, with a response deadline of July 21, 2026. The contract is managed by the Government of Canada through the Department of National Defence and is scoped specifically for performance in Québec. While no set-aside information or point of contact is provided, bidders must clearly demonstrate capacity to deliver comprehensive, on-site service support within the designated location for the full term of the warranty.