Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →

This Government Contract opportunity from Department Of Defense was posted on May 27, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Interior Signage Supply and Installation

Closed
Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 811490
New
SLED
CHP San Francisco Area office - Bicycle Maintenance and Repair Services - IFB #26C335003
Solicitation # 26C335003
The Department of the California Highway Patrol is soliciting bids for bicycle maintenance and repair services for its San Francisco Area office under IFB 26C335003. The contract, budgeted at 30,000 dollars, is anticipated to run from January 1, 2027, to December 31, 2029. The primary scope of work involves performing semi-annual major tune-ups and annual overhauls for 12 bicycles, with a requirement that all service requests be completed within five business days. Maintenance must adhere to manufacturer specifications, and specific high-quality replacement parts, such as Shimano XT brake components and Marathon tires, are required unless approved alternatives are authorized by the CHP Bicycle Sergeant. The contract will be awarded to the lowest responsive and responsible bidder. Bidders must provide a valid contractor license number, class, and expiration date to be considered. While the Disabled Veteran Business Enterprise participation requirement has been waived, incentives are still available for certified DVBE and small business participants. Bids must be submitted as a single, stapled physical package in a sealed envelope by November 5, 2026, at 11:00 AM. Electronic submissions via email or fax are strictly prohibited. Awardees must provide proof of liability insurance and workers compensation, and personnel must pass security clearance to access state premises.
Department of the California Highway Patrol

POSTED

5 days ago

DEADLINE

in 9 days
NAICS: 811490
New
Federal
Massachusetts Army National Guard Tailoring & Alterations
Solicitation # W912SV27QA001
The Massachusetts Army National Guard is seeking a firm-fixed-price Blanket Purchase Agreement for the tailoring and alteration of Army Service Uniforms and Army Green Service Uniforms. These services must be performed in accordance with Army Regulation 670-1 and DA PAM 670-1. The contractor is responsible for providing all necessary personnel, equipment, and materials to perform alterations primarily at their own place of business, though they must also be capable of traveling to various MAARNG Readiness Centers, Armories, or installations within Massachusetts for on-site sizing and fitting events. The contract is a total small business set-aside under NAICS code 811490, with a performance period spanning five years from December 1, 2026, through November 30, 2031. Awards will be made to multiple responsible vendors based on the lowest total price for all Contract Line Item Numbers, provided the quotes are technically acceptable. Interested small businesses must submit their quotes via email to the designated points of contact by November 6, 2026. Submissions must include a completed SF 1449, detailed pricing for all CLINs, a technical acceptability narrative, and valid SAM.gov registration information. Invoicing and payment will be processed electronically through the Wide Area Workflow system. Inspection and acceptance will occur at the destination, specifically the MAARNG Element at Hanscom Air Force Base, Massachusetts.
W7NE Uspfo Activity Ma Arng

POSTED

6 days ago

DEADLINE

in 9 days
NAICS: 811490
International
Oil Painting Conservation
Solicitation # K-17-2-1-6
The National Army Museum is seeking a professional conservation company or individual conservator under solicitation K-17-2-1-6 to prepare artworks for the Uniform: Identity and Innovation exhibition opening on April 6, 2027. The scope of work includes the conservation of 12 oil paintings and 10 associated frames, the production of five new frames, and the glazing of nine paintings using Truvue UV92. The selected provider is responsible for the secure transport of works from the museum's Stevenage storage facility to their studio and the final delivery to the museum in Chelsea. The estimated contract value is 35,000 GBP excluding VAT, with a performance period running from November 4, 2026, to February 22, 2027. The award will be based on a weighted scoring system consisting of qualifications and experience (40%), approach and methodology (20%), and fee (40%). Key requirements include providing full documentation of treatments through written reports and photographs, protecting vulnerable labels on artwork reverses, and maintaining insurance coverage for the total value of the works, which is 134,850 GBP, including a UKRG security supplement. Tenders must be submitted electronically by October 29, 2026, and must include a completed form of tender, qualification and health and safety questionnaires, a resource plan with a Gantt chart, and evidence of relevant experience.
National Army Museum

POSTED

14 days ago

DEADLINE

in about 23 hours
NAICS: 811490
SLED
Musical Instrument Maintenance, Repairs, Parts, and Services
Solicitation # R-AW-26016
Prince William County Public Schools (PWCS) is seeking one or more qualified sources to establish a firm-fixed price requirement contract for musical instrument maintenance, repairs, parts, and services. The scope of work is divided into three instrument groups: Wind (Group A), Percussion (Group B), and Strings (Group C). Award(s) may be granted by group, by individual item, or by specific geographic zones including Central, East, and West. The contract requires the selected provider to offer free pickup from school sites within five business days of notification and free return within ten business days. If repairs exceed ten business days during the school year, the contractor must provide comparable loaner instruments at no cost. Bids must be submitted electronically via the Bonfire portal by November 16, 2026. The contract will be awarded to the lowest responsive and responsible bidder based on a calculation involving labor rates, a percentage discount on parts, and lump sum amounts for specific repairs. Key requirements include a one-year warranty on materials and workmanship, compliance with the Buy American Act, and a mandatory Certificate of Compliance regarding background checks for personnel contacting students. All shipments must be FOB Destination, and payments are processed net thirty days from the approval of invoices. Bidders must be authorized to transact business in the Commonwealth of Virginia and adhere to all applicable federal and state non-discrimination and labor laws.
Prince William County Schools

POSTED

30 days ago

DEADLINE

in 19 days

AI Contract Overview

Show more

The contract involves the supply and installation of interior signage that is integrated with the office furniture system at Wright-Patterson Air Force Base. It is a subcontract opportunity issued by the Department of the Air Force under the Department of Defense, focusing on services classified under NAICS code 811490, which typically covers commercial and industrial machinery and equipment repair and maintenance. The solicitation was posted on May 27, 2026, with a response deadline of June 1, 2026, at 4:00 PM. Although specific details about set-asides or organization types are not provided, the work location is clearly identified as Wright-Patterson AFB. The contract emphasizes the importance of integrating signage seamlessly with the existing furniture system, highlighting both supply and installation aspects to ensure a cohesive office environment.

General Info

Supply and install integrated interior signage with office furniture at Wright-Patterson AFB, DoD subcontract.

NAICS

811490 - Other Personal and Household Goods Repair and Maintenance

Place of Performance

Wright Patterson AFB, OH, USA

Set-Aside

NONE

Documents

This scope was carved out of FA860126Q0060.

The full solicitation package (2 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

Intent to Sole Source Office Furniture

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PhaseClosed
Posted

subcontract

Response Deadline

Deadline has passed

Submission Closed

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → Department Of The Air Force
ContactsNo contacts available
OfficeN/A
Office AddressN/A
ContactsNo contact information available

Full Description

Show more
Supply and installation of interior signage integrated with the office furniture system at Wright-Patterson AFB.

More opportunities from Department Of Defense → Department Of The Air Force

Same awarding agency

NAICS: 541715
Federal
Notice of Intent to Sole Source - Post-delivery support of developed space and ground hardware and software
Solicitation # FA254826RB008
The Space Rapid Capabilities Office (Space RCO) intends to award a sole-source contract to Systems & Technology Research, LLC for post-delivery support of developed space and ground hardware and software. This effort focuses on providing systems engineering support for the verification, validation, and on-orbit troubleshooting of payloads, as well as transitioning a prototype ground system to full operational capability (FOC) within six months of the award to proceed. Key technical requirements include the development of a new graphical user interface, integration of mission-unique software, enhanced telemetry processing for 24/7 operations, and direct integration with the R2C2 Acme Ground Segment using cloud infrastructure and cybersecurity best practices. The contract is structured with multiple CLINs utilizing Cost Plus Fixed Fee (CPFF), Time and Materials (T&M), and Cost Only (No Fee) pricing models. The period of performance includes a mix of one and two-year base periods with multiple one-year option extensions. While the government intends to proceed with a sole-source award under 10 U.S.C. 3204(a)(1) due to the contractor's role as the original developer, other responsible sources may submit capability statements by November 4, 2026. To be considered viable, any alternative response must explicitly prove the ability to achieve FOC within six months and demonstrate integration with the R2C2 Acme Ground Segment without relying on proprietary data.
Research and Development in the Physical, Engineering, and Life Sciences (except Nanotechnology and Biotechnology)

POSTED

8 days ago

DEADLINE

in 7 days
View Details
NAICS: 541715
SBIR / STTR
Agile Wire Harness Manipulation and Installation for Unmanned Aerial Systems
Solicitation # DAF27BZ01-DV011
Solicitation DAF27BZ01-DV011 is a Department of the Air Force Direct-to-Phase-II SBIR effort seeking a modular, agile robotic manufacturing workcell to automate the routing and installation of flexible wire harnesses for Unmanned Aerial Systems and advanced munitions, such as the Coyote and Franklin Affordable Mass Missile families. The project aims to eliminate manual assembly bottlenecks by transitioning a TRL 4 proof-of-concept into a production-ready system capable of sub-millimeter positioning tolerances of 0.5 mm or less. Key technical requirements include the integration of a COTS collaborative arm with a multi-modal sensor stack for real-time adaptive control, the ability to retask the system for new harness families within eight hours, and the creation of a digital thread for traceability. Successful implementation is expected to increase throughput by two to four times and reduce skilled labor hours by at least 50 percent. This total small business set-aside has a maximum value of 2,000,000 dollars over a 24-month period of performance, with an additional 50,000 dollars available for Technical and Business Assistance. Proposals are evaluated based on technical merit, innovation, investigator qualifications, and commercial potential. Awardees must provide a fully functional robotic workcell, the complete autonomous software stack, a cross-program retasking report, and a comprehensive technical data package. Compliance requirements include adherence to CMMC cybersecurity standards, ITAR/EAR export controls, and military standard compliance. Proposals must be submitted via the DSIP portal and are subject to strict formatting and single-proposal limits per small business concern.
Research and Development in the Physical, Engineering, and Life Sciences (except Nanotechnology and Biotechnology)

POSTED

21 days ago

DEADLINE

in 28 days
View Details
NAICS: 541512
SBIR / STTR
Technical Data Package Modernization for Information Assurance and Secure Data Exchange
Solicitation # DAF27BZ01-DV008
Solicitation DAF27BZ01-DV008 is a Direct-to-Phase II SBIR effort issued by the United States Air Force to modernize Technical Data Packages (TDPs) for complex Air and Space Force platforms. The project addresses critical gaps in Information Assurance and secure data exchange, specifically targeting the need for robust configuration control and protection against cyber threats in Model-Based Definition and digital twin environments. The objective is to advance a solution from TRL 4 to at least TRL 6, resulting in a functional prototype that aligns with DoD Zero Trust Architecture and Trusted AI and Autonomy priorities. Key technical requirements include the development of a secure web-based MBD visualization tool, an encrypted configuration management system for as-sustained asset states, automated IA compliance validation tools, and an end-to-end encrypted data exchange framework incorporating AI/ML for damage detection and sustainment planning. This total small business set-aside has a maximum performance period of 24 months with a base value of 2,000,000 dollars, plus up to 50,000 dollars in Technical and Business Assistance (TABA) funding. Proposals are evaluated based on technical merit and innovation, qualifications of key personnel, and commercial potential. Awardees must comply with stringent security standards, including the Cybersecurity Maturity Model Certification (CMMC) for safeguarding Controlled Unclassified Information. Deliverables include the functional prototypes, comprehensive technical documentation, and a transition plan for operational integration. Proposals must be submitted via the DSIP portal as a single PDF and must include a detailed OCI mitigation plan and Phase I equivalency documentation to avoid disqualification.
Computer Systems Design Services

POSTED

21 days ago

DEADLINE

in 28 days
View Details
NAICS: 541715
SBIR / STTR
Optimally Packaged Assembly for Laser Systems (OPALS)
Solicitation # DAF27BZ01-NV002
The Optimally Packaged Assembly for Laser Systems (OPALS) solicitation, number DAF27BZ01-NV002, is a Phase I SBIR effort issued by the United States Air Force. The program seeks to develop a ruggedized, lightweight, and compactly packaged internal optical beam control system for airborne high energy laser applications. Rather than redesigning outer moldlines, the focus is on optimizing internal packaging to replace traditional flat optical benches with architectures that are tolerant of vibration, shock, and thermal gradients. Key technical priorities include the use of advanced materials free of shedding contaminants, athermalized design strategies, and the implementation of precision manufacturing techniques like additive manufacturing to ensure ease of alignment and the potential for line replaceable units. This is a small business set-aside solicitation with a maximum award value of 300,000 dollars, with an additional 6,500 dollars available for Technical and Business Assistance. Proposals are primarily awarded as firm-fixed-price contracts and are evaluated based on technical merit, the qualifications of key personnel, and commercial potential. Applicants must submit a seven-volume proposal via the DSIP portal, including detailed technical, cost, and foreign affiliation disclosures. Compliance requirements include registration in the System for Award Management, adherence to Buy American provisions, and the submission of a DD Form 2345 for export-controlled technical data.
Research and Development in the Physical, Engineering, and Life Sciences (except Nanotechnology and Biotechnology)

POSTED

21 days ago

DEADLINE

in 28 days
View Details
NAICS: 541715
SBIR / STTR
Agile Autonomous Technical Data Package to Path Robotic Task Specification
Solicitation # DAF27BZ01-DV012
The United States Air Force, under the Department of War SBIR program, is soliciting proposals for solicitation DAF27BZ01-DV012, titled Agile Autonomous Technical Data Package to Path Robotic Task Specification. This Direct to Phase II effort seeks the development of an automated end-to-end software platform that ingests heterogeneous Technical Data Packages, including 3D CAD models, 2D drawings, and Bills of Materials, to autonomously generate optimized, collision-free robotic inspection trajectories. The goal is to eliminate manual waypoint programming and hard-coded scripting, reducing quality control programming timelines from days to under two hours and achieving a Technology Readiness Level of 6/7. The resulting system must be capable of driving multi-vendor industrial manipulators and will be validated against representative aerospace assembly geometries. This total small business set-aside opportunity has a maximum value of 2,000,000 dollars over a 24-month period of performance, with an additional 50,000 dollars available for Technical and Business Assistance. Proposals are evaluated based on technical merit, qualifications of key personnel, and commercial potential. Applicants must be registered in the System for Award Management and comply with CMMC cybersecurity requirements and export control regulations. Key deliverables include the ingestion and planning software, enterprise data interface documentation, and quarterly status reports, culminating in a software-driven execution demonstration using high-fidelity simulations or physical hardware.
Research and Development in the Physical, Engineering, and Life Sciences (except Nanotechnology and Biotechnology)

POSTED

21 days ago

DEADLINE

in 28 days
View Details
NAICS: 541715
SBIR / STTR
High Speed, Low Temperature Hyperspectral Imager for High Enthalpy Ground Testing
Solicitation # DAF27BZ06-NV006
The United States Air Force is soliciting Phase I proposals under the Small Business Innovation Research program for the development of a high-speed, low-temperature hyperspectral imager. This technology is intended for use in high enthalpy ground testing to resolve temperature and emissivity across the surface of test articles. The solution must meet threshold requirements of measuring surface temperatures from 0 to 1500 degrees Fahrenheit at a sampling rate of 4000 Hz, with a maximum pixel footprint of 0.1 inch and an accuracy of +/- 10 degrees Fahrenheit. Objective goals include increasing the temperature range to 2000 degrees Fahrenheit, the sampling rate to 5000 Hz, reducing the pixel footprint to 0.05 inch, and improving accuracy to +/- 5 degrees Fahrenheit. This is a firm-fixed-price effort with a Phase I award maximum value of 300,000 dollars, plus up to 6,500 dollars for Technical and Business Assistance. Phase I requires research and a feasibility report for a benchtop proof-of-concept, while Phase II focuses on fabricating an operationally viable prototype. Proposals are evaluated based on technical merit and innovation, qualifications of key personnel, and commercial potential, with additional scrutiny regarding security risks and foreign affiliations. Submissions must be made through the DSIP portal by November 25, 2026, and must include seven specific volumes, including technical, cost, and commercialization reports.
Research and Development in the Physical, Engineering, and Life Sciences (except Nanotechnology and Biotechnology)

POSTED

21 days ago

DEADLINE

in 28 days
View Details
NAICS: 541715
SBIR / STTR
Fusion of Cooperative Information Sharing for Uncrewed Air Systems (FOCISAUS)
Solicitation # DAF27TZ01-DV003
The Fusion of Cooperative Information Sharing for Uncrewed Air Systems (FOCISAUS) solicitation, number DAF27TZ01-DV003, is a Phase II STTR effort issued by the United States Air Force. The program seeks prototype-ready solutions to enhance cooperative perception for uncrewed air systems, specifically focusing on the ability of distributed sensing nodes to share, prioritize, and fuse mission-relevant information in near real time. The goal is to reduce blind spots and improve object detection, tracking, and situational awareness within cluttered and bandwidth-constrained environments. Key technical requirements include adaptive data selection, compression, and a robust data fusion design capable of converting distributed observations into actionable products for autonomy software or operator interfaces, with a particular interest in systems that remain functional under degraded communications. This is a total small business set-aside with a maximum award value of 2,000,000 dollars, plus up to 50,000 dollars in additional funding for Technical and Business Assistance. Proposals are evaluated based on technical merit, innovation, investigator qualifications, and commercial potential. Eligible offerors must be U.S. small businesses with fewer than 500 employees and must be registered in the System for Award Management and the SBA Company Registry. Submissions must be made via the DSIP portal by November 25, 2026. Additionally, contractors are expected to meet a projected CMMC Level 2 cybersecurity requirement to safeguard federal contract information and controlled unclassified information.
Research and Development in the Physical, Engineering, and Life Sciences (except Nanotechnology and Biotechnology)

POSTED

21 days ago

DEADLINE

in 28 days
View Details

Earlier notices in this NAICS code

Posted before this notice, open and closed

Find Active Opportunities Like This

Get AI-powered intelligence on the opportunities still open

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS