Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

This Solicitation opportunity from Department Of Defense was posted on February 5, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

NOTA3D PREV. MAINTENANCE AND REMEDIAL REPAIR

Closed
W519TC26QA089Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 811310
New
Kubota M8200 Clutch Replacement
Solicitation # kubota-m8200-clutch-replacement
Management and Training Corporation is soliciting lump sum fee proposals for the clutch replacement of a Kubota M8200 tractor with front wheel assist, located at the Earle C. Clements Job Corps Center in Morganfield, Kentucky. The scope of work requires a qualified contractor to provide all transportation, labor, materials, and equipment to diagnose and repair the clutch assembly and power take-off system. Key technical requirements include replacing friction discs, bearings, oil seals, and O-rings, resurfacing the flywheel, and replacing hydraulic pipes and filters as needed. The contractor must perform all work according to manufacturer specifications and provide a final summary of diagnostic findings, an itemized list of replaced parts, and warranty documentation upon completion. This solicitation is set aside for small businesses, including VOSB, SDVOSB, WOSB, and HUBZone certified entities. Bids must be submitted via email to Angie Mahoney by 3:00 PM CST on November 3, 2026, and must include a bid sheet, proof of insurance, a completed supplier packet with a W-9, and applicable SBA certification letters. Award decisions will be based on best value, with a focus on administrative compliance and technical qualifications. The contract is subject to various Federal Acquisition Regulations, including standards for combating trafficking in persons, Buy American restrictions, and Service Contract Labor Standards per Wage Determination 2015-4687 Revision 31 for Kentucky.
Earle C. Clements Job Corps Center

POSTED

about 2 hours ago

DEADLINE

in 5 days
NAICS: 811310
New
SLED
RFP 07-135 Roseville Electric Utility – Air Compressor Maintenance
Solicitation # 07-135
The City of Roseville is soliciting proposals under RFP 07-135 for a consultant to provide comprehensive scheduled preventive and corrective maintenance for air compressors and auxiliary systems, including Ingersoll Rand equipment. The services will be performed at the Roseville Energy Park and Sunset Energy Center in California. The selected consultant will be responsible for providing all necessary labor, technical expertise, specialized tooling, and materials. This is a prevailing wage project with an initial contract duration of five years, estimated to commence in April or May. Proposals must be submitted by December 16, 2026, via email to the City Clerk or through physical delivery in a sealed container with the required Attachment H label. The award will be based on a formal evaluation panel process considering the firm's experience and qualifications (25 points), the proposed project plan (35 points), and cost (40 points), with potential interviews for top candidates. Requirements for the successful bidder include obtaining a City of Roseville business license, providing 100% faithful performance and labor and materials bonds, and maintaining specific insurance policies. Consultants must also disclose any conflicts of interest and adhere to the Levine Act regarding political contributions.
City of Roseville

POSTED

about 4 hours ago

DEADLINE

in about 2 months
NAICS: 811310
New
SLED
Roseville Electric Utility – Gas Compressor Maintenance
Solicitation # 07-137
The City of Roseville is soliciting proposals for Gas Compressor Maintenance Services to support the Roseville Energy Park and the Roseville Energy Center and RPEAK. The selected contractor will provide all labor, supervision, technical expertise, specialized tooling, equipment, and materials necessary for both scheduled preventive and corrective maintenance on natural gas compressors, specifically Gas Packagers and Ariel models, and their associated auxiliary systems. The contract is intended to run for an initial term of five years, with services estimated to commence in April or May. This is a prevailing wage project requiring adherence to all fair employment laws, with certified payroll required for contracts exceeding 25,000 dollars. The successful proposer must provide a 100 percent Faithful Performance Bond and a 100 percent Labor and Materials Bond. Proposals are due by December 17, 2026, and must include a Proposer’s Certification, a Non-collusion Declaration, a Levine Act Disclosure Statement, and proof of active registration with the California Secretary of State. Award will be made to the responsible proposer determined to be the most advantageous to the City through a formal evaluation panel process. Invoicing is to be submitted monthly, delineated by task and personnel, with payment terms set at 30 days following receipt of satisfactory services.
City of Roseville

POSTED

about 5 hours ago

DEADLINE

in about 2 months
NAICS: 811310
New
SLED
RFP 07-136 Roseville Electric Utility – Vapor Compressor Maintenance
Solicitation # 07-136
The City of Roseville is soliciting proposals for Vapor Compressor Maintenance services to support its power plant sites, specifically the Roseville Energy Park and the Sunset Energy Center. The selected contractor will provide all labor, supervision, technical expertise, specialized tooling, equipment, and materials necessary to perform both scheduled preventive and corrective maintenance on vapor compressors and associated auxiliary systems, including American Compressor units. The initial contract term is five years, with services estimated to commence in April or May. This is a prevailing wage project requiring adherence to all fair employment laws and registration with the Department of Industrial Relations. Proposals are due by December 17, 2026, and will be evaluated based on the firm's experience and qualifications (25 points), the proposed project plan (35 points), and the proposed cost (40 points). The successful bidder must execute a City-prepared contract and provide a 100% Faithful Performance Bond and a 100% Labor and Materials Bond. Submission requirements include a sealed physical package with a specific label or an electronic PDF submission via email, provided the file size does not exceed 25 megabytes. The contractor must also certify the absence of conflicts of interest and provide proof of a City of Roseville Business License.
City of Roseville

POSTED

about 5 hours ago

DEADLINE

in about 2 months
NAICS: 811310
New
SLED
FY27 Pump Station and Sewer and Stormwater Structures Inspection and Maintenance
Solicitation # COC-CIFB-FY27-31268
The City of Cambridge Department of Public Works is soliciting bids for the FY27 Pump Station and Sewer and Stormwater Structures Inspection and Maintenance contract, identified as COC-CIFB-FY27-31268. The project has an estimated total value of 1,530,000.00 dollars, which includes a base year and two optional renewal years. The selected contractor will provide all labor and materials for quarterly, biannual, and annual preventative maintenance and emergency repairs for a wide array of infrastructure, including pump stations, level sensors, bending weirs, holding tanks, and generators. Services extend to the troubleshooting of SCADA and telemetering equipment, PLCs, and control valves across various city locations such as the Harvard Tunnel, various firehouses, and multiple municipal schools. The contract will be awarded to the lowest responsible and eligible bidder. Requirements for eligibility include a minimum of five years of experience in the specified activities and the employment of a Massachusetts licensed electrician. The contractor must provide a 24-hour emergency answering service and adhere to strict compliance standards, including the City's Truck Safety Ordinance for large vehicles and the Cambridge Employment Plan regarding minority and resident hiring. Financial security is required via a bid deposit of at least 5 percent of the bid value, with the successful bidder providing performance and payment bonds for 100 percent of the contract sum. Bids must be submitted through the eProcurement portal by November 19, 2026.
Public Works

POSTED

about 5 hours ago

DEADLINE

in 21 days
NAICS: 811310
New
SLED
ANNUAL ROTATING EQUIPMENT INSPECTION, TESTING, REPAIR, RECONDITIONING AND STORAGE SERVICES
Solicitation # 2026-RFP-130
Solicitation 2026-RFP-130, issued by the City of Lakeland, seeks qualified contractors to provide annual inspection, testing, repair, reconditioning, and storage services for critical rotating equipment at the McIntosh and Larsen Power Plants. The scope of work covers a wide range of industrial machinery, including low- and medium-voltage AC and DC electric motors, as well as circulating water and condensate pumps. Required services include clean inspect test (CIT) procedures, troubleshooting, motor rewinding, machining, welding, and dynamic field balancing. The contractor is also responsible for the pickup, transportation, and secure indoor storage of equipment, ensuring strict preservation measures such as periodic shaft rotation and moisture control to prevent corrosion and damage. The selection process is based on a points-based criteria to identify the vendor most responsive to the city's needs. Proposers must submit their responses via the OpenGov portal by October 30, 2026, and provide essential documentation including a signed W-9, Sunbiz registration, a notarized indemnification agreement, and a human trafficking affidavit. Contractors must adhere to strict safety standards, including OSHA compliance and specific certification for crane operations and critical lifts. Furthermore, vendors are required to maintain insurance policies with AM Best ratings of no less than A and must undergo a safety audit covering EMR and employee training records to ensure compliance with city risk management standards.
LE - Production - MPP

POSTED

about 8 hours ago

DEADLINE

in 8 days

AI Contract Overview

Show more

This contract is a sole source solicitation issued to NOTA3D for the preventative maintenance and remedial repair of WAX 3D printers. The solicitation, identified by number W519TC26QA089, was posted on February 5, 2026, with a response deadline of February 16, 2026. It is a total small business set-aside under FAR 19.5, ensuring the opportunity is reserved exclusively for small businesses. The contract falls under the NAICS code 811310, which relates to commercial and industrial machinery and equipment repair and maintenance services. The solicitation is managed by the Department of Defense through an office located in Rock Island, Illinois. The primary point of contact for this opportunity is Lynn Baker, with a secondary contact, Sophia Muckenfuss, both reachable via their provided military email addresses. The contract’s performance location is unspecified. Interested parties can view more details and submit their responses through the provided SAM.gov link. This contract ensures the continued operational readiness of specialized WAX 3D printing equipment through dedicated maintenance and repair services.

General Info

Sole source small business contract for WAX 3D printer maintenance, repair, defense solicitation.

NAICS

811310 - Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance

Place of Performance

IL

Set-Aside

SBA

Documents

2

Justification for Limiting Competition Under SAT - Nota3D Maintenance Services

PDF, High priority: read this firstjustification-and-authorization
High

Solicitation W519TC26QA089 for Preventative Maintenance and Repair of 3D Printers

PDF, High priority: read this firstrfq
High

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

PhaseClosed
Posted

Solicitation

Response Deadline

Deadline has passed

Submission Closed

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → W6QK Acc-Ri
Contacts2 people available
OfficeROCK ISLAND, IL, 61299-0000, USA
Office AddressROCK ISLAND, IL, 61299-0000, USA
Contacts
Sophia Muckenfuss

Full Description

Show more

SOLE SOURCE SOLICITATION TO NOTA3D FOR PREVENTATIVE MAINTENANCE AND REMEDIAL REPAIR TO WAX 3D PRINTERS

More opportunities from Department Of Defense → W6QK Acc-Ri

Same awarding agency

NAICS: 333248
New
Federal
Automated Fluidized Bed Mixer Facility Modernization for end use at Pine Bluff Arsenal – CSO
Solicitation # W519TC26ACSO
The Army Contracting Command - Rock Island is seeking qualified vendors for the Automated Fluidized Bed Mixer Facility Modernization at Pine Bluff Arsenal under solicitation W519TC26ACSO. This Commercial Solution Opportunity (CSO) aims to replace legacy systems with an automated, high-precision mixing, granulation, and drying system to modernize colored smoke energetics production. The required system must handle mix batches between 800 and 1200 lbs and specifically address the hygroscopic nature of sugar and potassium chlorate to prevent clumping in humidity levels up to 95 percent. Key performance requirements include sub-millimeter granulation consistency and a maximum re-blend rate of 5.0 percent. Due to the hazardous nature of the materials, the solution must be compliant with Class I and II, Division 1 environments and include high-speed fire detection, suppression systems, and automated fail-safe shutdown protocols. This procurement is conducted as a streamlined acquisition under 10 U.S.C. 4022 and DFARS Subpart 212.70, treating all solutions as commercial items per FAR Part 12. The selection process consists of three phases: a Phase 1 Solution Brief, a Phase 2 Pitch, and a Phase 3 Full Quote. Evaluation criteria focus on technical merit, innovation, importance to agency operational readiness, and financial feasibility. The final award will be a Firm-Fixed-Price contract covering core equipment, de-clumping and transfer sub-systems, transportation, on-site installation, commissioning, and operator training. Phase 1 submissions are due by November 10, 2026, and must be submitted as unclassified electronic files to the designated points of contact.
All Other Industrial Machinery Manufacturing

POSTED

1 day ago

DEADLINE

in 12 days
View Details
NAICS: 325180
New
Federal
Non-Micronized Pentaerythritol (PE)
Solicitation # W519TC27QA010
Army Contracting Command - Rock Island is soliciting a single firm-fixed price contract for Non-Micronized Pentaerythritol (PE) to support the Pine Bluff Arsenal. This requirement is a 100 percent Small Business Set-Aside under NAICS code 325180 and is being conducted in accordance with FAR Part 13 Simplified Acquisition Procedures. The contract consists of a base quantity of 41,800 lbs under CLIN 0001 and a mandatory First Article Test (FAT) of 2 lbs under CLIN 0002, which must be completed prior to the production run. Additionally, there is an option for an additional 41,800 lbs under CLIN 1001. All materials must be produced according to drawing 36-1-317, Rev F, and must meet a minimum specification of 95 percent by weight passing a No. 18 sieve. The total evaluated price for award will include both the base and the 100 percent option quantity. Performance is expected to begin within 14 calendar days of award and be completed within 365 calendar days, with the base quantity delivery required by January 30, 2027, and the option quantity estimated by January 28, 2028. Deliveries are FOB Destination to Pine Bluff, Arkansas, and must be packaged in 50 lbs bags or fiber drums, accompanied by a Safety Data Sheet and Certificate of Analysis. The contract requires compliance with DoD unique identification standards and electronic invoicing via the Wide Area WorkFlow system. Permissible variations in quantities for CLINs 0001, 0002, and 1001 are limited to a 5 percent increase or decrease.
Other Basic Inorganic Chemical Manufacturing

POSTED

1 day ago

DEADLINE

in 6 days
View Details
NAICS: 321113
New
Federal
LUMBER BASIC ORDERING AGREEMENT
Solicitation # W519TC-27-Q-LUMB
The Government is establishing a no-cost Basic Ordering Agreement (BOA) for the procurement of a comprehensive range of lumber products, including dimensional softwood, hardwood, plywood, and pressure-treated lumber, as well as steel strapping. This agreement, managed by Army Contracting Command-Rock Island, supports multiple military installations such as the McAlester Army Ammunition Plant, Anniston Army Depot, and the Joint Munitions Technology Center. The BOA has a maximum ceiling of 99 million dollars and is valid for up to five years. This is a three-step procurement process where only qualified BOA holders from Step Two are eligible to compete for specific Firm-Fixed Price delivery orders in Step Three. To qualify for the BOA, offerors must demonstrate the technical capability to deliver materials to at least one of the seven designated installations and provide a detailed Technical Questionnaire Scenario covering sourcing, quality assurance, contract management, logistics, and environmental standards. Delivery requirements are strict, with standard orders due within 14 business days and emergency orders within seven business days. Evaluation for the BOA is based on technical acceptability, while subsequent delivery orders will be awarded based on factors such as lowest price, technical merit, and past performance. All lumber must comply with industry grading standards such as ALSC, SPIB, WCLIB, and APA, and treated wood must meet AWPA standards.
Sawmills

POSTED

1 day ago

DEADLINE

in 8 days
View Details

Earlier notices in this NAICS code

Posted before this notice, open and closed

Find Active Opportunities Like This

Get AI-powered intelligence on the opportunities still open

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS