Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, December 9 at 2:00 PM ET

Register Free →

This Subcontract opportunity from Michigan was posted on October 9, 2025. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Passenger Van Supply (Gas-Powered, 2026 Model Year)

Closed
State & Local

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 336211
New
Federal
Mobile (1x) and Spirometry (1x) Labs for the CDC
Solicitation # 47QMCA27Q0006
The General Services Administration is soliciting quotes for the CDC to provide one Mobile X-Ray Lab and one Mobile Spirometry Lab. This acquisition is a total set-aside for small businesses under NAICS 336211 for Motor Vehicle Body Manufacturing. The contract is issued under the authority of the Revolutionary FAR Overhaul Part 12 for commercial products. Proposals must be submitted in two separate volumes, Technical and Pricing, to Malik Addo by December 17, 2026, at 3 PM EST. Award will be granted to the responsible quoter with the highest technically rated quote and a fair and reasonable price, based on technical approach and past performance from the last five years. The vehicles must meet stringent medical and safety standards, including ADA, NFPA, OSHA, and Joint Commission requirements, with X-ray specifications adhering to 42 CFR Part 37. Technical requirements include FIPS-compliant encryption, HIPAA compliance, and hardened software against malware. Deliverables include a Post Award Conference within five days, a Verification Design Review within 60 days, and a Final Design Review within 90 days of order receipt. Vehicles must feature specific identification plates, vinyl graphics, and protective coatings like Gator Kote or Rhino Lining. Performance will be verified through TMC RP 803 Pre-Service Vehicle Inspections and functional testing of all equipment.
Gsa/fas Automotive Center

POSTED

about 4 hours ago

DEADLINE

in about 1 month
NAICS: 336211
New
DIBBS
GRILLE, METAL
Solicitation # SPE7L3-27-T-2680
Solicitation SPE7L3-27-T-2680 is a request for quotations issued by the Defense Logistics Agency Weapons Support for the procurement of 128 tan metal grilles, identified as commercial items under NSN 2510-01-434-7238. The requirement is designated as a Service-Disabled Veteran-Owned Small Business set-aside. Delivery is required within 180 days after award to the DLA Distribution New Cumberland facility, with a need ship date of February 26, 2027. The contractor must perform First Article Testing on three units within 60 days and retain these as production standards. Technical compliance requires adherence to TDP Rev C Gen 3 and specific reference drawings, with welding and casting processes meeting MIL-STD-248. The manufacturer must maintain a calibration system meeting ANSI/NCSL Z540-1-1994 or ISO 10012-1 and an inspection system complying with ISO 9001:2015. Final inspection and acceptance will occur at the manufacturing facility. Packaging must follow MIL-STD-2073-1E and special instruction AK14347238, utilizing double-walled fiberboard boxes with Styrofoam pads to immobilize the product. The contract includes strict regulatory requirements, including CMMC Level 2 certification and compliance with ITAR and EAR export controls for technical data. Marking must follow MIL-STD-130N and MIL-STD-129. Offerors must submit quotes via DIBBS and comply with the Buy American Act and Berry Amendment. Payment will be processed electronically through the Wide Area WorkFlow system.
DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 23 hours ago

DEADLINE

in 10 days
NAICS: 336211
New
International
26-58170 Mobile Command Centre (MCC) for the Centre for Autonomous Flight Systems (CAFS), Question and Answer #1
Solicitation # 26-58170
The National Research Council of Canada is soliciting the procurement of one purpose-built Mobile Command Centre (MCC) for the Centre for Autonomous Flight Systems (CAFS) and the Drone and Flight Autonomy Laboratory. This self-contained vehicle will serve as a primary hub for ground control, telemetry, safety monitoring, and data recording for autonomous and remotely piloted aircraft systems. The MCC must support a wide range of aircraft and sensors, providing its own power supply, satellite connectivity, and climate control to operate in remote areas across Canada. It is designed to integrate with an existing ground-control trailer, requiring specific component commonality to ensure shared network and communication capabilities. The vehicle must be built on a Class 3 cutaway chassis with a minimum GVWR of 12,500 lb and a length of at least 25 feet. Key technical requirements include five interior workstations, a 55-inch IP56-rated exterior daylight-viewable display, dual heavy-duty alternators, and specialized RF exposure warning signage. The contract is awarded based on a weighted ratio of 20% technical merit and 80% price. All deliverables must be received by March 15, 2027, with final acceptance by March 31, 2027, following rigorous acceptance testing in Ottawa. The contractor is also required to provide training, maintenance, and annual inspections, while adhering to environmentally preferable packaging standards.
National Research Council of Canada

POSTED

1 day ago

DEADLINE

in 21 days

AI Contract Overview

Show more

The University of Michigan is seeking a subcontract for the supply of one new 2026 model year gas-powered passenger van delivered as a fully manufactured unit. This procurement falls under NAICS code 336211, which pertains to the manufacture of motor vehicles. The solicitation was posted on October 9, 2025, and requires all responses to be submitted by the deadline of November 6, 2025. Interested parties can find further details and submission guidelines through the University of Michigan's sourcing portal.

General Info

Place of Performance

MI, USA

Set-Aside

NONE

Documents

This scope was carved out of RFQ-0011790-GGS-2025.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

2025 September Vehicle Bid

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

This one is closed. Find the next one like it.

Open contracts like this one, right now:

  • Mobile (1x) and Spirometry (1x) Labs for the CDCOpen now, due in 31 days
  • PLATFORM, TAILGATE, VEHIOpen now, due in 3 days
See open contracts like this

Ask CLEATUS

I've read this contract. Ask me anything.

Timeline

PhaseClosed
Posted

subcontract

Response Deadline

Deadline has passed

Submission Closed

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

Show more
AgencyUniversity of Michigan
ContactsNo contacts available
OfficeN/A
Organization / AgencyUniversity of Michigan
Office AddressN/A
ContactsNo contact information available

Full Description

Show more
Supply of one new 2026 model year gas-powered passenger van as a fully manufactured unit.

More opportunities from University of Michigan

Same awarding agency

NAICS: 334517
New
SLED
Pump Laser-ZEUS
Solicitation # RFQ-0012504-RES-2026
The University of Michigan has issued solicitation RFQ-0012504-RES-2026 for the one-time purchase of a single Pump Laser unit. The required technical specifications for the equipment include a repetition rate of 100 Hz, a pulse energy of 0.8 J @ 532 nm, and a pulse duration of approximately 8 ns. The University requires that the product be listed and labeled by Underwriters Laboratory (UL) or another recognized testing firm and comply with ANSI, NFPA, IEEE, and IEC industry standards. Shipping must be handled as FOB Destination for domestic orders or DDP for international shipments. To be considered, suppliers must provide comprehensive background information, including their Tax ID or Dun & Bradstreet number, and disclose any conflicts of interest regarding University employees. Because the University must verify that pricing is fair and reasonable for the Federal Government, bidders not using a published catalog must provide a list of three or more previous customers and the prices they paid for similar products. Proposals must also include details on export control classification numbers (ECCN), sustainability certifications, and available extended warranty options. The response deadline is November 18, 2026, at 3:00 PM EST, with standard payment terms of Net 45, although accelerated Net 0 options are available through approved electronic programs.
Irradiation Apparatus Manufacturing

POSTED

7 days ago

DEADLINE

in 1 day
View Details

Earlier notices in this NAICS code

Posted before this notice, open and closed

Find Active Opportunities Like This

Get AI-powered intelligence on the opportunities still open

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS