Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Repair and Maintenance of Traffic Enforcement Electronics

Active

State & Local

Response Deadline08/24/2026, 08:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract encompasses the diagnostics, repair, and preventative maintenance of radar and lidar units utilized in traffic enforcement operations. These electronic systems are critical for accurate speed detection and traffic law compliance, requiring specialized technical expertise to ensure reliability and calibration standards are consistently met. Service providers are expected to perform timely on-site and off-site maintenance, respond to malfunctions, and conduct routine inspections to minimize downtime and uphold legal defensibility of enforcement data. Work under this subcontract is to be performed at the specified location in Framingham, Massachusetts, with a response deadline of August 24, 2026. The contract falls under NAICS code 811212, indicating it is dedicated to electronic equipment repair and maintenance services. The contracting authority, POLTRAF - Traffic Programs under the Commonwealth of Massachusetts, is seeking qualified vendors to support the state’s traffic safety initiatives through sustained operational readiness of enforcement technologies. No set-aside provisions are specified, meaning all eligible contractors may submit proposals, and performance must align with state standards for accuracy, security, and service responsiveness.

General Info

Repair and maintain radar and lidar units for traffic enforcement in Framingham, Massachusetts, by August 24, 2026.

Agency

Massachusetts → POLTRAF - Traffic ProgramsView Agency

NAICS

811212 - Computer and Office Machine Repair and MaintenanceView NAICS

Place of Performance

Worcester Rd Framingham, MA, 01702, US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 15

subcontract

Response DeadlineAug 24

Submission deadline

Response Deadline

08/24/2026, 08:00:00 PM UTCin about 1 month

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyMassachusetts → POLTRAF - Traffic Programs

ContactsNo contacts available

OfficeN/A

Organization / Agency

Massachusetts → POLTRAF - Traffic Programs

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Diagnostics, repair, and preventative maintenance of radar and lidar units used in traffic enforcement.

Similar Contracts

Same NAICS industry code

In-Home Installation and Technical SupportThe contract entails the onsite installation, setup, user training, and ongoing technical support for Personal Emergency Response System (PERS) units within participants’ residences across New York. This includes performing initial deployments, educating end users on proper device operation, and delivering timely follow-up service calls to resolve any functional issues or hardware malfunctions. The work requires direct field engagement in private homes to ensure accessibility and reliability of life-saving emergency response equipment for vulnerable populations. This subcontract is issued by the Area Agency on Aging under NAICS code 811212, with a response deadline of August 14, 2026. The services must be conducted in compliance with local operational standards and are designed to support the ongoing safety and independence of individuals relying on PERS technology. All tasks are performed in situ, necessitating trained personnel capable of handling both technical equipment and sensitive client interactions, with emphasis on precision, responsiveness, and customer-centric service delivery.

Area Agency on Aging

POSTED

about 17 hours ago

DEADLINE

IUID (Unique Item Identifier) Marking and Compliance ServicesThe contract requires the application and verification of permanent, machine-readable Unique Item Identifiers (IUID) in strict compliance with MIL-STD-130 standards on all delivered items. This includes ensuring accurate data formatting, proper marking methods, and timely submission of item information to the Department of Defense UID Registry to maintain full traceability and accountability throughout the defense supply chain. All markings must be durable, legible, and capable of being scanned under operational conditions to meet military logistics and inventory requirements. The work is being performed as a subcontract under the Defense Logistics Agency, part of the Department of Defense, with the NAICS code 811212 indicating services related to industrial and commercial machinery and equipment repair and maintenance. The contract is not subject to any specific set-aside provisions and is intended to support end-to-end IUID compliance across defense-received items. Performance of the tasks must occur in alignment with DoD standards without geographic constraints specified, and the work must be completed to ensure seamless integration into the broader defense logistics and tracking systems managed by the DLA.

Defense Logistics Agency

POSTED

about 17 hours ago

DEADLINE

Electronics and Instrumentation MaintenanceThe contract involves the repair and calibration of electronic systems and instrumentation critical to facility operations at Wright Patterson Air Force Base under a subcontract arrangement. It falls under NAICS code 811212, which pertains to electronic equipment repair and maintenance, and is managed by the Department of Defense through the FA8601 Aflcmc Pzio office. The work requires precise technical expertise to ensure the reliability and accuracy of operational electronics, with all performance obligations tied to the designated military installation. The solicitation was posted on July 17, 2026, and responses are due by July 31, 2026, at 3:00 PM, creating a narrow window for qualified vendors to submit proposals. No set-aside preferences or specific organizational type requirements are indicated, leaving the opportunity open to eligible subcontractors who can meet the technical demands of maintaining defense-critical instrumentation.

FA8601 Aflcmc Pzio

POSTED

about 22 hours ago

DEADLINE

Preventive Maintenance PlanningTexas Southern University is seeking a subcontractor to develop comprehensive preventive maintenance procedures aimed at ensuring the long-term reliability of its Building Automation System. The scope of work includes creating detailed inspection, cleaning, and calibration schedules along with clear task descriptions tailored to maintain system performance over time. The contract was posted on July 16, 2026, with a response deadline of August 13, 2026, at 5:00 PM CT. The solicitation falls under NAICS code 811212, which corresponds to electronic and precision equipment repair and maintenance. The place of performance and agency office location are not specified, but the contract is administered through the Texas SmartBuy portal, and all proposals must be submitted via the provided link before the deadline.

Texas Southern University

POSTED

DEADLINE

Emergency SCADA Repair and On-Call SupportThe contract seeks a subcontractor to provide continuous 24/7 emergency response services for SCADA system failures, requiring immediate diagnostic and repair capabilities at all times, including nights, weekends, and holidays. The response must ensure minimal downtime and operational continuity for critical infrastructure under the jurisdiction of the California Department of Corrections & Rehabilitation. The contractor is expected to maintain readiness to deploy promptly, resolve complex technical issues, and support system stability without delay. This is a subcontract under NAICS code 811212, with a response deadline of July 31, 2026, and a posting date of July 16, 2026. The place of performance is not specified beyond the state of California, and no set-aside provisions are indicated. The solicitation is open through the CalEprocure platform, and interested parties must submit their proposals by the stated deadline to be considered for award.

California Department of Corrections & Rehabilitation

POSTED

DEADLINE

Non-Emergency SCADA System Repair ServicesThe contract titled Non-Emergency SCADA System Repair Services is issued by the California Department of Corrections & Rehabilitation to secure subcontractor services for routine maintenance and repair of SCADA systems during standard business hours. The work involves scheduled diagnostic assessments, troubleshooting, and both hardware and software repairs necessary to maintain operational integrity without responding to urgent or emergency failures. Services are expected to be performed in alignment with the agency’s operational needs, focusing on preventive and planned interventions rather than reactive measures. The solicitation was posted on July 16, 2026, with a response deadline of July 31, 2026, and is classified under NAICS code 811212, which corresponds to computer and office machine repair and maintenance. The contract is structured as a subcontract and is open for bids through the California eProcurement portal. The place of performance and specific locations are not specified in the data provided, but services are anticipated to support facilities under the jurisdiction of the California Department of Corrections & Rehabilitation across the state. No set-aside provisions are indicated, and no point of contact details are listed in the available information.

California Department of Corrections & Rehabilitation

POSTED

DEADLINE

Manufacturer Repair Services for Critical ComponentsThe contract involves the repair and refurbishment of critical components for Teledyne API air quality monitoring and calibration equipment that supports the Florida Department of Environmental Protection’s monitoring network. These services are essential to maintaining the accuracy and reliability of air quality data collected across the state, ensuring compliance with environmental regulations and public health standards. The work requires specialized technical expertise to restore equipment to manufacturer specifications, with all components undergoing rigorous testing to guarantee performance integrity after refurbishment. Subcontractors must be capable of handling sensitive environmental monitoring hardware with precision, adhering to strict quality assurance protocols during each phase of the repair process. The solicitation is open for responses until August 6, 2026, and is classified under NAICS code 811212, which corresponds to electronic and precision equipment repair and maintenance. The contract is intended for a subcontractor to support the agency’s ongoing operational needs, with work performance expected to occur in coordination with FDEP’s logistics and technical teams to minimize disruption to monitoring operations. All proposals must demonstrate proven experience with Teledyne API systems and the ability to deliver timely, defect-free refurbishments.

Department of Environmental Protection

POSTED

DEADLINE

Extended Warranty and Lifecycle Support ServicesThe contract is for the provision of extended warranty and lifecycle support services for Taser handles, batteries, docks, and VR equipment, aimed at ensuring continued operational reliability and performance throughout the usable life of the devices. This subcontract is issued under the NAICS code 811212, indicating a focus on electronic and appliance repair and maintenance services, and is managed by the Texas Department of Insurance. The services will encompass proactive maintenance, repair, replacement, and technical support for the specified hardware to minimize downtime and maintain compliance with operational standards. Responses to this solicitation are due by July 31, 2026, with the posting date listed as July 16, 2026. The place of performance and organizational details are not specified, though the contract originates from the state of Texas and is accessible via the Texas SmartBuy portal. While no set-aside designation or point of contact information is provided, vendors must be prepared to meet the technical and operational requirements for supporting law enforcement-grade equipment with stringent reliability and uptime expectations. The contract does not specify geographic restrictions, implying services may be delivered remotely or on-site as needed to support the agency’s equipment across its jurisdiction.

Texas Department of Insurance

POSTED

DEADLINE

Drone Maintenance and Repair ServicesThe contract seeks a subcontractor to provide ongoing maintenance, troubleshooting, and repair services for drone systems and associated electronic components under the auspices of the Forestry Department of the Government of Jamaica. The work is critical to ensuring the operational readiness of unmanned aerial systems used for forestry monitoring, land management, and environmental surveillance. The subcontractor must possess the technical expertise to diagnose and resolve hardware and software issues across various drone platforms and embedded electronics, with an emphasis on rapid response and consistent system reliability. All services are expected to be performed in alignment with the operational needs of the agency without specifying a defined geographic location for performance. The opportunity is posted under NAICS code 811212, which categorizes it as electronic and precision equipment repair and maintenance, indicating a focus on technical service rather than manufacturing or supply. The solicitation was published on July 16, 2026, with responses due by July 27, 2026, suggesting a relatively short procurement cycle. While no set-aside type is specified, the contract is explicitly structured as a subcontract, meaning the winning entity will likely be engaged by a primary contractor rather than contracting directly with the government. Interested parties must review the full details through the provided government portal to understand any additional requirements, qualifications, or technical specifications not outlined in the public posting.

Forestry Department

POSTED

DEADLINE

EDAX X-Ray System Maintenance SupportThe contract encompasses comprehensive maintenance, calibration, and repair services for EDAX X-Ray systems, specifically supporting the Elect Plus, Octane Pro, and Apollo models. This subcontract is focused on ensuring the continued operational integrity, accuracy, and performance of these critical analytical instruments through scheduled and reactive service efforts, with all work to be performed in alignment with manufacturer specifications and industry best practices for X-ray detection systems. The scope requires technical expertise in hardware diagnostics, software troubleshooting, sensor recalibration, and component replacement to maintain system reliability for users in regulated environments. Issued by the Texas Commission on Environmental Quality under NAICS code 811212, the contract was posted on July 16, 2026, with responses due by July 30, 2026. Although specific performance location details are not provided, services are expected to support equipment deployed across Texas state operations. The contract does not specify a set-aside status or point of contact, and all submissions must be directed through the designated Texas SmartBuy portal linked in the documentation. Contractors must demonstrate proven experience with EDAX systems and possess the capability to respond promptly to service requests to minimize downtime for essential environmental monitoring and analytical functions.

Texas Commission on Environmental Quality

POSTED

DEADLINE

On-Site Installation and Maintenance ServicesThe contract pertains to the installation, preventive maintenance, and repair of print devices across multiple school locations within Mississippi, with a strict four-hour on-site response service level agreement to ensure minimal disruption to educational operations. Services must be delivered promptly and reliably, covering all aspects of printer lifecycle management from initial setup to ongoing technical support, with an emphasis on maintaining high operational availability of printing equipment throughout the school districts. The contract is classified as a subcontract under NAICS code 811212, which corresponds to commercial and industrial machinery and equipment repair and maintenance. It was posted on July 16, 2026, with bids due by July 30, 2026, and is administered by the Mississippi Department of Finance and Administration under the MPTAP designation. The place of performance spans various school sites across the state, though specific locations are not outlined in the posting. Interested parties must submit proposals prior to the deadline to be considered for award, with all work required to comply with the stipulated response timeline and service standards.

POSTED

DEADLINE

Supply Chain Traceability and Obsolete Parts DocumentationThe contract requires the maintenance and documentation of supply chain traceability for all components to ensure full visibility and accountability throughout the procurement and manufacturing process, with strict adherence to the C02 and C03 compliance clauses. This includes tracking the origin, movement, and status of materials from supplier to final assembly, ensuring that all data is accurately recorded and readily accessible for audits or inspections. Additionally, the contractor must actively manage obsolete or discontinued parts, identifying them promptly, documenting their replacement or withdrawal, and ensuring they do not enter production or remain in inventory without proper authorization and justification. The work is performed under a subcontract issued by the Defense Logistics Agency on behalf of the Department of Defense, with the NAICS code 811212 indicating services related to commercial and industrial machinery and equipment repair and maintenance. The contract was posted on July 16, 2026, and the performance location and point of contact details are not specified, but the work is tied to DLA’s broader mission of sustaining military supply chains. Compliance with traceability and obsolete parts management standards is critical to maintaining operational readiness and regulatory alignment within defense logistics operations.

Defense Logistics Agency

POSTED

DEADLINE

More opportunities from Massachusetts → POLTRAF - Traffic Programs

Same awarding agency

Logistics and On-Site Support CoordinationThe contract entails the secure logistics coordination for the transport, distribution, and return of radar and lidar equipment across Massachusetts, ensuring timely handling for repair, calibration, and field deployment. All personnel and vehicles involved must adhere to strict security protocols to safeguard sensitive equipment during transit, with clear documentation and chain-of-custody procedures required throughout each phase of movement. Performance is focused on meeting precise scheduling and operational standards to support state traffic monitoring programs without disruption to critical services. The work is to be performed primarily from Framingham, with full responsibility for managing equipment movements statewide. The subcontract is classified under NAICS code 484220 for specialized freight trucking and requires demonstrated capability in handling sensitive electronic instrumentation under controlled conditions. Proposals must be submitted by August 24, 2026, and the contracting entity is the Massachusetts Traffic Programs division under POLTRAF, with no set-aside provisions specified. All parties must ensure compliance with state and federal transportation regulations, maintain insurance coverage for high-value assets, and provide real-time tracking and reporting capabilities for accountability during every leg of the logistics cycle.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

DEADLINE

in about 1 month

Technical Training for Radar/Lidar OperatorsThe contract titled Technical Training for Radar/Lidar Operators is a subcontract solicited by POLTRAF - Traffic Programs under the Massachusetts agency, targeting the development and delivery of comprehensive operator training programs focused on the proper use, operational limitations, and legal protocols associated with radar and lidar devices. Training content must ensure personnel are fully competent in deploying these technologies in accordance with state and federal regulations, emphasizing accuracy, safety, and compliance in enforcement scenarios. The performance location is designated as Worcester Rd in Framingham, Massachusetts, with a zip code of 01702, indicating the primary operational and training delivery zone. The solicitation was posted on July 15, 2026, with a firm response deadline of August 24, 2026, at 8:00 PM, making it a time-sensitive opportunity for qualified training providers. The North American Industry Classification System code 611430 identifies this as a contract under Other Schools and Instruction, signaling that the core deliverable is instructional and educational in nature rather than equipment supply or technical support. The absence of a set-aside designation or organization type specification suggests an open competition for any eligible subcontractor capable of delivering high-standard operational training. All deliverables must meet the specific technical and legal requirements established by Massachusetts traffic enforcement standards, with no indication of additional financial or administrative terms provided in the available data.

Professional and Management Development Training

POSTED

DEADLINE

in about 1 month

Calibration Services for Radar and Lidar SystemsThe contract involves the periodic calibration and certification of radar and lidar systems used in traffic enforcement, ensuring the devices maintain regulatory accuracy and legal defensibility. All services must be performed to meet established technical and compliance standards, supporting the integrity of speed enforcement operations conducted by the Massachusetts Traffic Programs agency. The work is tied to a specific place of performance at Worcester Rd in Framingham, Massachusetts, with a zip code of 01702, indicating the physical location where equipment will be serviced or collected for calibration. This subcontract opportunity was posted on July 15, 2026, with a response deadline of August 24, 2026, and is classified under NAICS code 811219, which pertains to other electronic and precision equipment repair and maintenance. The contracting entity is POLTRAF - Traffic Programs, operating under the state of Massachusetts, and no set-aside provisions are designated for small businesses or other categories. Contractors must be prepared to deliver timely, certified calibration results that uphold the evidentiary standards required in court proceedings, with all work expected to be completed without disruption to ongoing traffic enforcement activities.

Other Electronic and Precision Equipment Repair and Maintenance

POSTED

DEADLINE

in about 1 month

Supply of Radar and Lidar Speed Enforcement EquipmentThe contract involves the procurement and delivery of law enforcement-grade radar and lidar systems designed for traffic speed enforcement, encompassing handheld, dash-mounted, and fixed-position units to support comprehensive speed monitoring operations. These systems must meet strict technical and performance standards required by law enforcement agencies to ensure accurate, reliable, and legally defensible speed data collection. The equipment will be deployed across various mobile and stationary configurations to enhance traffic safety and compliance efforts within the designated jurisdiction. The solicitation is issued under the NAICS code 334511, indicating manufacturers of navigational, measuring, electromedical, and control instruments, and is classified as a subcontract with a response deadline of August 24, 2026. Performance is required at the location identified as Worcester Rd in Framingham, Massachusetts, with the contracting entity being POLTRAF - Traffic Programs under the Massachusetts agency structure. While no specific set-aside provisions or point of contact details are provided, the posting date of July 15, 2026, indicates a standard procurement timeline allowing potential vendors sufficient time to prepare and submit bids through the designated Commonwealth purchasing portal.

Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

POSTED

DEADLINE

in about 1 month

WTO ANNOUNCEMENT SP27-RADARLIDAR-X66The Massachusetts Traffic Programs agency is issuing a WTO announcement to solicit potential contractors for the future provision of radar and lidar equipment, along with associated calibration and repair services. This solicitation, identified as BD-27-1084-POLTR-TRAFF-131382, was posted on July 15, 2026, with responses due by August 24, 2026, at 8:00 PM Eastern Time. The procurement is intended for state and local government entities, with the office located in Framingham, Massachusetts, and performance expected to occur at the same location. Dianne Miller is listed as the primary point of contact for purchaser inquiries. The announcement serves as a preliminary notice indicating intent to issue a request for information or proposal at a later date and does not constitute a binding commitment to procure. Interested parties should monitor the provided link for future updates and formal solicitations.

Electronic and Precision Equipment Repair and Maintenance

POSTED

DEADLINE

in about 1 month