Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, September 2 at 2:00 PM EDT

Register Free →

Repair of a Louisiana 4-Cylinder Sugarcane Dump Harvest Wagon - RFQ

Active
1232SA26Q1055Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

Solicitation number 1232SA26Q1055 is a request for quotation issued by the USDA Agricultural Research Service for the repair of a Louisiana 4-Cylinder Sugarcane Dump Harvest Wagon. This acquisition is a total small business set-aside under NAICS code 811310 for Commercial and Industrial Machinery and Equipment Repair and Maintenance, with a size standard of 12.5 million dollars. The work will be performed in Schriever, Louisiana, and is subject to Service Contract Labor Standards Wage Determination Number 2015-5179, although an exemption certification is available for services meeting specific commercial criteria. Quotations must be submitted to the designated points of contact by September 5, 2026. All inquiries regarding the solicitation must be submitted in writing by August 31, 2026. The procurement follows the Revolutionary FAR Overhaul format for commercial items, and interested parties should refer to the provided statement of requirements and solicitation terms and conditions for minimum capabilities and evaluation criteria.

General Info

USDA request for sugarcane dump harvest wagon repairs in Schriever, Louisiana by 2026.

Agency

Department Of Agriculture → USDA Ars Afm ApdView Agency

NAICS

811310 - Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and MaintenanceView NAICS

Place of Performance

Schriever, LA, 70395, USA

Set-Aside

SBA

Documents

(5)

Attachment+5+-+SF1449+Quote+Submission+Forms.pdf

PDF

Service Contract Labor Standards Exemption Certification

PDFscls-exemption-certification

Attachment+2+-+Statement+of+Requirements.pdf

PDF

Attachment+1+-+Solicitation+Terms+and+Conditions.pdf

PDF

Attachment+3+-+Service+Contract+Act+WD+2015-5179.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseCombined Synopsis
Posted

Combined Synopsis

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Agriculture → USDA Ars Afm Apd
Contacts1 person available
OfficeBELTSVILLE, MD, 20705, USA
Organization / Agency
Department Of Agriculture → USDA Ars Afm Apd
View Agency Profile
Office AddressBELTSVILLE, MD, 20705, USA

Full Description

Show more

This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in RFO FAR Part 12. This announcement constitutes the only solicitation. Quotations are being requested and a separate written solicitation will not be issued. 


Solicitation number 1232SA26Q1055 is issued as a Request for Quotation (RFQ) for the repair of a Louisiana 4-Cylinder Sugarcane Dump Harvest Wagon


The solicitation document and incorporated provisions and clauses are those in effect through the Revolutionary FAR Overhaul (RFO). This solicitation incorporates provisions and clauses by reference. The full text of provisions and clauses may be accessed electronically at www.acquisition.gov/far-overhaul.


This acquisition is a Total Small Business Set-Aside. The applicable North American Industry Classification Standard Code (NAICS) is 811310 - Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance. The small business size standard is $12.5 Million  All responsible sources may submit a quotation which will be considered by the agency. 


The Service Contract Labor Standards Wage Determination Number 2015-5179 for Schriever, LA is applicable and is attached.


The Agriculture Priorities and Allocations System (APAS) and assigned rating are not applicable to this solicitation.


See “Attachment 1 - Solicitation Terms and Conditions” for applicable clauses, provisions, instructions, and evaluation criteria. See also “Attachment 2 - Statement of Requirements” for the minimum capabilities and performance requirements.


There are no additional requirement(s) or terms and conditions (such as financing arrangements or warranty requirements) determined to be necessary for this acquisition and consistent with customary commercial practices.


Quotes are due by the date/time/time zone listed in the “Date Offers Due” field.


Submit all quotes to the Primary Point of Contact and Secondary Point of Contact (if applicable) by the “Date Offers Due”.


Quotes received after the established “Date Offers Due” deadline will be considered late. Late quotes may only be considered if it is in the Government’s best interest and if it will not unduly delay award.


Questions regarding this solicitation shall be submitted in writing to the Primary Point of Contact and Secondary Point of Contact (if applicable) no later than 11:59 PM CT on August 31, 2026 (08/31/2026). Answers will be posted at least 48-hours prior to the “Date Offers Due.”.

Similar Contracts

Same NAICS industry code

NAICS: 811310
New
Field Disassembly of a WWII Tank Hull at Twentynine Palms, CA
Solicitation # M0026426Q0134
Bastion Supply and Logistics, an SDVOSB small business, is seeking a subcontractor for the field mechanical disassembly of a WWII M4A3 Sherman tank hull at MCAGCC Twentynine Palms in San Bernardino County, California. The scope of work involves the undercarriage removal and recovery of track chains, bogie truck assemblies, road wheels, drive sprockets, an idler, return rollers, a bulldozer mounting arm, and a belly plate over a period of three to five working days. The project requires one oxy-acetylene torch cut on an engine deck door stop, which must be performed by a certified individual with five years of documented experience. All components must be palletized and steel-banded for transport. The contractor is responsible for providing portable sanitation and acting as the generator of record for lead-bearing waste, while Bastion will provide a 35,000 lb forklift and a skid steer. Personnel must possess DBIDS base access, antiterrorism awareness, and complete mandatory briefings on range safety, desert survival, and desert tortoises. This project is subject to the Service Contract Act and DOL Wage Determination 2015-5629, requiring certified payroll. Quotes must be firm not-to-exceed and are due by September 3, 2026, with range availability confirmed from October 31 to December 7, 2026. Any subcontract is contingent upon the award of the prime contract under solicitation M0026426Q0134.
PURECJ HOLDING LLC dba Bastion Supply & Logistics

POSTED

about 13 hours ago

DEADLINE

in 7 days
View Details
NAICS: 811310
New
Federal
Repair Power Lab Air Compressor
Solicitation # 70Z03926QCGA00031
The contractor is required to perform comprehensive repair services on an Ingersoll Rand Model R5.5i-A125 air compressor located in McAllister Hall at the United States Coast Guard Academy in New London, Connecticut. This includes full responsibility for all labor, materials, equipment, transportation, and supervision needed to restore the unit to operational condition. Key tasks involve executing lockout/tagout procedures, replacing critical components such as the cooling fan, inlet valve, unload solenoid, blowdown valve, air filter, oil filter, air/oil separator, and drive belt, as well as removing and analyzing an oil sample and replacing the oil. Additional duties include inspecting the scavenge line, cleaning the coolers and panel filter, greasing the motor if applicable, and conducting thorough operational tests to confirm proper function before returning the compressor to service. This work is solicited under the contract title Repair Power Lab Air Compressor, with solicitation number 70Z03926QCGA00031, issued on August 10, 2026, and responses due by August 31, 2026. The opportunity is designated as a Small Business Set Aside under NAICS code 811310 and is administered by the Department of Homeland Security through the Coast Guard Academy, with the place of performance specified in New London, Connecticut, and the contracting office located in Groton. Primary point of contact is Kayla Rex, reachable via email and phone, with Jason M. Askeew listed as secondary contact. All work must be performed on-site at the designated facility, and successful performance requires strict adherence to safety protocols and operational standards to ensure the compressor meets mission-critical requirements.
Cg ACADEMY(00039)

POSTED

about 17 hours ago

DEADLINE

in 3 days
View Details
NAICS: 811310
New
Federal
Area of Interest (AoI) – Pad Mount Transformer & Voltage Regulator Inspection and Repair (CSO-W911KF25SC002)
Solicitation # W911KF25SC002-AoI0012
The U.S. Army Contracting Command – Anniston Army Depot (ACC-ANAD) is seeking qualified contractors to inspect and evaluate single-phase and three-phase pad-mount transformers and voltage regulators to determine whether each unit should be repaired or retired. The work involves comprehensive physical and electrical testing, including Turns Ratio Test, Megger insulation resistance, impedance, and load/no-load watts, to assess the condition of equipment listed in Attachment Aol0012. Contractors must provide a detailed report per unit including nameplate data, test results, and a clear recommendation for repair or retirement, accompanied by a detailed cost estimate for any recommended repairs. All work must comply with industry standards such as IEEE C57.12.34, ANSI/ASTM D3487 for PCB-free transformer oil, and DOT regulations for transportation. The oil used must be new, non-reprocessed, and certified to contain less than 50 ppm of PCBs, and repaired units must be painted olive green with the kVA rating clearly displayed in three-inch letters. A bayonet-type fuse must be installed with a label instructing venting prior to removal. The contract will include one base year and four option years, with performance taking place at the Anniston Army Depot in Alabama, where all equipment will be delivered and inspected. The solicitation, identified as W911KF25SC002-AoI0012, is open for submissions through SAM.gov with a deadline of August 28, 2026. Proposals must be submitted electronically and are evaluated on a best-value basis considering technical merit, mission relevance, and cost reasonableness, without a preference for lowest price technically acceptable. The technical proposal must be submitted separately from the price proposal, with the former containing no cost information and the latter itemizing all fees and charges. Offerors must be registered in SAM.gov with an active Unique Entity ID and CAGE code, and must also register in the Procurement Integrated Enterprise Environment (PIEE) system to receive payments. Contractors must self-certify their small business status, be free from suspension or debarment, and ensure submissions are unclassified. Foreign-owned firms may respond provided they can obtain necessary security approvals. The contract requires a minimum three-year warranty on all materials and workmanship, use of new or OEM-equivalent replacement parts, and adherence to prescribed labeling and marking standards. No formal contract clauses, attachments with page counts, or detailed CLINs are provided; however, the
W6QK Acc Anad

POSTED

about 17 hours ago

DEADLINE

in 15 days
View Details
NAICS: 811310
New
Federal
Electrical maintenance/retrofit for Devlieg Mill Machining Center
Solicitation # W519TC-26-Q-A138
Solicitation W519TC-26-Q-A138, issued by the Army Contracting Command - Rock Island, seeks a contractor to provide a firm fixed price electrical retrofit for the Devlieg Mill 4W72 Machining Center at the Rock Island Arsenal - Joint Manufacturing and Technology Center in Illinois. The scope of work includes the evaluation, engineering, procurement, manufacturing, and installation of an electrical retrofit package featuring new FANUC controls, servo motors, a spindle motor, and the integration of Renishaw Probe Systems with Inspection Plus Software. All new components and wiring must be labeled and comply with NEMA standards. A critical requirement of this contract is that the machine and all government-furnished equipment must remain on-site at the installation; off-site retrofit is strictly prohibited. The contract is estimated at 26,000 dollars and will be awarded to the responsible offeror whose proposal is most advantageous to the government, considering price and other factors. Key deliverables include a detailed maintenance and parts report due within five business days of completion, with final acceptance contingent upon inspection and verification of training by the Contracting Officer's Representative. The contractor is responsible for all transportation costs to the destination and must utilize Wide Area Workflow for invoicing. Compliance with the Buy American Act, Service Contract Labor Standards, and environmental regulations regarding ozone-depleting chemicals, PCBs, and asbestos is required. Proposals are due by September 8, 2026.
W6QK Acc-Ri

POSTED

about 17 hours ago

DEADLINE

in 11 days
View Details

More opportunities from Department Of Agriculture → USDA Ars Afm Apd

Same awarding agency

NAICS: 562112
New
Federal
Biohazard Waste Removal
Solicitation # 1232SA26Q0917
Solicitation number 1232SA26Q0917 is a combined synopsis and request for quotation issued by the USDA ARS AFM APD for biohazard waste removal services in Beltsville, Maryland. This unrestricted acquisition is conducted under FAR Part 12 for commercial items and is open to all responsible sources, with the applicable NAICS code 562112. The updated statement of work specifically excludes information regarding large animals. Interested vendors must be active and registered in the System for Award Management and submit electronic quotes to the designated point of contact by 4:00 pm Central Standard Time on September 2, 2026. All responses must include detailed specifications demonstrating the capability to provide the required services, as quotes that only offer equipment without comparative specifications will not be considered. The contract requires compliance with Department of Labor Service Contract Act wage determination 2015-4281, Revision 39, which establishes prevailing wage rates and fringe benefits for Maryland, Virginia, and the District of Columbia. Key labor requirements include providing proposed rates for each occupation and grade pay level in the bid. Additionally, contractors must provide uniforms at no cost to employees and a washing allowance of 3.35 dollars per week or 6.25 cents per day for non-wash-and-wear materials. Special provisions are noted for employees handling high-hazard materials such as acids, solvents, and lead paint, for whom an experienced differential is applicable. Payment for services will be processed through the Department of the Treasury Invoice Processing Platform.
Hazardous Waste Collection

POSTED

about 17 hours ago

DEADLINE

in 6 days
View Details
NAICS: 238190
New
Federal
K3 Barn Repairs, Prairie du Sac, Wisconsin
Solicitation # 1232SA26Q0919
This solicitation, numbered 1232SA26Q0919, is a combined synopsis and request for quotation issued under FAR Part 12 for commercial items, specifically for K3 Barn Repairs at the U.S. Dairy Forage Research Center in Prairie du Sac, Wisconsin. The acquisition is structured as a total small business set-aside under NAICS code 238190, with a small business size standard of $19.0 million in average annual receipts, restricting eligibility to responsible small business concerns. The work involves fabrication, installation, inspection, and documentation of repairs to the barn structure, requiring strict adherence to specifications, design drawings, and applicable industry standards such as ASTM, NFPA, NECA, NEMA, and UL, as well as compliance with preservation requirements including moisture content limits for treated lumber and proper labeling of materials. All work must be performed on-site, with final acceptance granted by the USDA upon successful inspection, and performance must be completed within 200 calendar days after receipt of the Notice to Proceed, with work commencing no later than 10 days after that notice. Proposals must be submitted as sealed physical bids to the designated USDA office in Beltsville, Maryland, by 1:00 p.m. local time on August 24, 2026, with no electronic submissions allowed. Offerors must be registered in SAM, provide a valid UEI and CAGE code, and complete mandatory representations including Buy American compliance, trafficking in persons prohibitions, and avoidance of confidentiality agreements that restrict disclosure. The evaluation will be based on two factors: technical acceptability as a threshold requirement and price fairness and reasonableness, with award determined by best value rather than lowest price technically acceptable. Contractors are subject to stringent packaging and labeling rules for materials, including preservation from environmental damage, and must comply with wage determinations, inspection protocols under FAR 52.246-12, and USDA-specific safety and environmental policies for asbestos, lead, and indoor air quality. Security protocols, key personnel management, submittal schedules, and warranty documentation are also required. Payment will be processed through USDA ARS using administrative code ARS-1232SA, with invoices submitted in quadruplicate unless otherwise specified, though exact contract value cannot be determined due to the absence of a completed Section B pricing structure.
Other Foundation, Structure, and Building Exterior Contractors

POSTED

about 17 hours ago

DEADLINE

in 7 days
View Details