Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, September 16 at 2:00 PM EDT

Register Free →

Annual Commercial Generator Maintenance and Testing

Active
Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract for the USDA Forest Service involves providing annual commercial generator maintenance and operational testing at the Oconaluftee Job Corps Center. The selected provider will support prime contractors by performing load transfer tests, verifying electrical specifications such as voltage, hertz, and amps, and ensuring automatic transfer switch functionality in accordance with NFPA and NED standards. The scope of work covers diesel, propane, and natural gas generators from brands including Onan, Kohler, and Generac, requiring the use of certified generator technicians who must deliver detailed PDF condition reports and inspection checklists. The opportunity is designated as a total Small Business Set Aside under NAICS code 811310. Interested parties must submit their responses by September 25, 2026, for performance in the 28719 zip code area.

General Info

Small business subcontract for annual generator maintenance and testing at Oconaluftee Job Corps.

Agency

Department Of Agriculture → USDA Forest ServiceView Agency

NAICS

811310 - Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and MaintenanceView NAICS

Place of Performance

NC, 28719, USA

Set-Aside

SBA

Documents

This scope was carved out of 12318726Q0216.

The full solicitation package (10 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

USDA Forest Service Oconaluftee Job Corps Center annual Generator Maintenance

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

Posted

subcontract

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Agriculture → USDA Forest Service
ContactsNo contacts available
OfficeN/A
Organization / Agency
Department Of Agriculture → USDA Forest Service
View Agency Profile
Office AddressN/A
ContactsNo contact information available

Full Description

Show more
Performs annual maintenance and operational testing for prime contractors on USDA Forest Service projects at the Oconaluftee Job Corps Center. Conducts load transfer tests, verifies voltage, hertz, and amps, and tests automatic transfer switch (ATS) functionality per NFPA and NED standards. Services Onan, Kohler, and Generac diesel, propane, and natural gas generators. Requires certified generator technicians. Delivers PDF condition reports and inspection checklists.

Similar Contracts

Same NAICS industry code

NAICS: 811310
New
RFQ#3857 Replace Walk-In Cooler and Freezer Doors
Solicitation # RFQ#3857
Management & Training Corporation (MTC) is soliciting bids under RFQ#3857 for a subcontracting opportunity to replace three walk-in refrigeration doors at the Charleston Job Corps Center in Charleston, West Virginia. The scope of work requires the contractor to provide all labor, materials, and supervision to remove and dispose of existing doors and install one walk-in cooler door and two walk-in freezer doors. The project includes the installation of all necessary hardware, such as hinges, latches, gaskets, and thresholds, ensuring airtight sealing and proper alignment. Deliverables include the fully operational doors and a minimum one-year workmanship warranty along with manufacturer certificates. This is a lump sum fee contract open to various small business set-asides, including SDB, WOSB, HUBZone, and SDVOSB. Bidders must submit their proposals via email by September 28, 2026, at 3:00 PM EST. Required submission documents include a bid sheet, a completed supplier packet with IRS W-9 and self-certification forms, proof of insurance, and three references for similar projects. Award selection is based on best value as determined by MTC. The contractor must comply with OSHA safety requirements, the Buy American Act, and Service Contract Labor Standards under Wage Determination 2015-4347. Invoicing is to be submitted on a weekly or bi-weekly basis and must include a valid purchase order number.
Management & Training Corporation

POSTED

about 11 hours ago

DEADLINE

in 12 days
View Details
NAICS: 811310
New
SLED
IFB #26C625002 CHP El Centro Area office - Automatic Gate and Roll-Up Door Maintenance Services
Solicitation # 26C625002
The Department of the California Highway Patrol (CHP) is soliciting bids under IFB 26C625002 for automatic gate and roll-up door maintenance services at the El Centro Area office. The anticipated contract term runs from April 1, 2027, to March 31, 2030. The scope of work requires the contractor to perform quarterly maintenance every ninety days for three automatic gates and four roll-up doors, including the provision of all necessary supplies such as belts, cleaning chemicals, oil, grease, switches, and fuses. A mandatory walk-through was scheduled for September 23, 2026, and the final response deadline is October 7, 2026. To be eligible, contractors must possess a valid California Contractor’s State License Board C-61/D-28 Doors, Gates and Activating Devices License and be registered with the Department of Industrial Relations (DIR) in compliance with prevailing wage laws. The agreement will be awarded to the responsive and responsible bidder offering the lowest cost, with potential price adjustments for Small Business, Micro-business, or Disabled Veteran Business Enterprise (DVBE) preferences. While the DVBE participation requirement has been waived, incentives remain available for those who utilize certified DVBE participation. Submission requirements are strict, requiring a single original physical bid package delivered via mail or hand delivery, labeled specifically as Do Not Open. Bidders must include all required certifications, including the Bidder Declaration, Conflict of Interest and Confidentiality Statement, and proof of liability insurance. Personnel assigned to the contract must undergo security clearance and driver license checks. All work must adhere to industry standards and applicable building, plumbing, and electrical codes, as well as the Americans with Disabilities Act of 1990.
Department of the California Highway Patrol

POSTED

about 17 hours ago

DEADLINE

in 21 days
View Details
NAICS: 811310
New
SLED
Automotive Lifts - Inspection, Maintenance and Repair
Solicitation # IFB-26-FSD-0291
The City of Phoenix Public Works department is soliciting sealed bids under IFB-26-FSD-0291 for a contract to provide certified annual inspections, maintenance, and as-needed repairs for automotive lifts across 13 various City Fleet Services locations. The contract features an initial three-year term commencing around November 1, 2026, with two optional one-year extensions for a total potential duration of five years. The award will be granted to the lowest responsive and responsible offeror, with the City reserving the flexibility to award by individual line items, group, or all-or-none. The scope of work requires adherence to ANSI/ALI ALIS: 2022 standards and OEM specifications. Key deliverables include providing inspection reports and detailed spreadsheets within three business days of service, as well as placing inspection stickers on equipment. The contractor must respond to service calls within two business hours and return equipment to service within three business days of notification. Pricing is firm and fixed for the first year, with annual increases considered upon 60 days' notice. Compliance requirements are stringent, including mandatory submissions of heat safety compliance, conflict of interest, and debarment certifications. For aviation-related work, contractors must sign a Sensitive Security Information Acknowledgement Form and adhere to supplemental airport terms and FAA grant assurances. All hazardous materials must be labeled per OSHA and NFPA standards. Payment is processed based on invoices accompanied by signed delivery or service tickets.
Public Works

POSTED

about 19 hours ago

DEADLINE

in 28 days
View Details

More opportunities from Department Of Agriculture → USDA Forest Service

Same awarding agency

NAICS: 334515
New
Federal
Phoenix Nextgen Infrared Scanning System
Solicitation # 12760426Q0137
The USDA Forest Service is soliciting quotes for the Phoenix Nextgen Infrared Scanning System under solicitation 12760426Q0137. This procurement is a total small business set-aside under NAICS code 334515, aimed at completing the modernization of an airborne infrared mapping system by migrating it to a Linux-based Single Board Computer platform. The scope of work includes the fabrication of SI-DRA-SBC hardware, the completion of the remaining 25 percent of software modernization, and the provision of maintenance support. The project requires the system to sustain the capture and processing of 200 scan lines per second and maintain stable operation without faults during test missions. The contract is a commercial items acquisition with a performance period of 12 months from the date of award, though all hardware items must be delivered to Boise, Idaho, within 60 days of award. Award will be based on the lowest evaluated price of a quote that meets all technical requirements specified in the Bill of Materials. The contractor must adhere to strict cybersecurity supply chain risk management standards and provide chain-of-custody documentation for procured products. Acceptance of the system is contingent upon a functional demonstration and validation by the Forest Service Technical Manager, ensuring successful hardware integration and real-time orthorectification capabilities.
Instrument Manufacturing for Measuring and Testing Electricity and Electrical Signals

POSTED

3 days ago

DEADLINE

in 2 days
View Details

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS