Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Earthworks and Subgrade Stabilization

Active
Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract titled Earthworks and Subgrade Stabilization requires comprehensive excavation, grading, and soil stabilization activities to prepare a subgrade foundation suitable for subsequent base and pavement layers. All work must meet a strict compaction standard of 95% Modified Proctor Density as defined by ASTM D1557, ensuring the subgrade achieves the requisite structural integrity and load-bearing capacity. The performance location is specified as Panama, with no additional state or zip information provided, and the work is intended to support infrastructure development under the auspices of the US Embassy in Panama City, managed through the International Boundary and Water Commission: US-Mexico. This is a subcontract opportunity with a NAICS code of 238990, indicating it falls under other heavy and civil engineering construction services. The solicitation was posted on July 28, 2026, with responses due by August 25, 2026, at 8:00 PM. While no specific point of contact or set-aside details are provided, the nature of the contract and its association with a US government overseas mission underscore its strategic importance and adherence to federal construction standards. Interested parties must ensure full compliance with geotechnical requirements, particularly regarding soil preparation and compaction, as failure to meet the 95% Modified Proctor specification may result in rejection of work or contractual non-compliance. The absence of agency office address details suggests direct performance at the site in Panama with logistical coordination handled through the embassy’s established infrastructure channels.

General Info

Earthworks and subgrade stabilization in Panama at 95% Modified Proctor density for US Embassy infrastructure.

Agency

International Boundary And Water Commission: Us-Mexico → US Embassy Panama CityView Agency

NAICS

238990 - All Other Specialty Trade ContractorsView NAICS

Place of Performance

PANAMA, PA-8, PAN

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

Posted

subcontract

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyInternational Boundary And Water Commission: Us-Mexico → US Embassy Panama City
ContactsNo contacts available
OfficeN/A
Organization / Agency
International Boundary And Water Commission: Us-Mexico → US Embassy Panama City
View Agency Profile
Office AddressN/A
ContactsNo contact information available

Full Description

Show more
Excavation, grading, and soil stabilization to prepare the subgrade for base and pavement layers, including compaction to 95% Modified Proctor Density (ASTM D1557).

Similar Contracts

Same NAICS industry code

NAICS: 238990
New
Federal
Elevator Preventive Maintenance and Major Repairs ServicesThis contract, solicitation W912CN-26-Q-A031, seeks a Firm-Fixed-Price provider to deliver comprehensive elevator and chairlift preventive maintenance, repair, testing, inspection, and certification services across U.S. Army installations on Oahu, Hawaii, primarily at Schofield Barracks. The work is non-personal services in nature, meaning the contractor operates independently without government supervision, but remains fully accountable for meeting all standards outlined in the Performance Work Statement, including compliance with ASME A17.1, ASME A18.1, OSHA, and all federal, state, and local regulations. The contract covers a base period from September 1, 2026, through August 31, 2027, with four optional one-year periods and a potential six-month extension, creating a possible performance period extending to August 2031. The scope includes maintaining a detailed inventory of elevators and chairlifts across UPH barracks and non-UPH administrative facilities, requiring adherence to manufacturer-recommended preventive maintenance schedules and annual test dates as documented in the Technical Exhibits. The contractor must supply all personnel, tools, equipment, parts, and transportation necessary to perform these services, including providing all replacement parts for both Preventive Maintenance Orders and Demand Maintenance Orders. Offerors must submit a complete, non-partial quotation that includes detailed general information such as UEI, CAGE code, SAM.gov registration status, business size classification, and payment terms; a technically acceptable narrative not exceeding ten pages demonstrating understanding of the scope, including certification documentation for the Project Manager and all key technicians—specifically valid Hawaii elevator mechanic licenses and NAESAs Qualified Elevator Inspector certifications—a staffing and management plan capable of handling concurrent task orders across the Garrison, a baseline preventive maintenance schedule mapped to historical test dates, and at least two relevant project examples from the past three years involving similar elevator and chairlift maintenance without modernization. Pricing must be submitted for all contract line items except CLINs 0008–0009 and their options (now renumbered to X010 and X011), which are designated Not-Separately-Priced (NSP) and will be negotiated on a firm-fixed-price basis at the task order level. The total evaluated price includes the base period, all four option years, and the potential six-month extension under FAR 52.217-8, with one-half of the option price added
0413 Aq Hq Rco-Hi

POSTED

about 6 hours ago

DEADLINE

in 7 days
View Details
NAICS: 238990
New
Federal
Security fence at Coast Guard Air Station Clearwater FloridaThe contract mandates the demolition of approximately 400 linear feet of existing fencing and the installation of approximately 270 linear feet of new 8-foot industrial chain-link fencing with three strands of barbed wire at USCG Air Station Clearwater in Florida, along with two new gates: a 26-foot-wide powered sliding gate with a keypad system for vehicle entry and exit, and a 60-inch-wide non-powered swing gate with a manual cipher lock to accommodate commercial lawn mowers. All existing fence posts and concrete foundations must be fully removed and backfilled, and vehicle relocation during demolition will be coordinated by the unit during the preconstruction meeting. The new fence will not extend beyond a small bridge at the lot corner, and a camera will be installed only at the entrance of the powered gate to monitor vehicle ingress, with no camera required for the pedestrian gate. Work must comply with strict site access protocols: all personnel require government-issued ID and must be vetted with SSN last four digits and citizenship status submitted in advance, and only U.S. citizens and permanent residents are permitted on-site. Work hours are restricted to Monday through Friday, 8 a.m. to 3 p.m., with no weekend or holiday work allowed. The solicitation is a Small Business Set-Aside under NAICS code 238990 with a $19 million size standard and awards to the Lowest Price, Technically Acceptable offeror. The firm-fixed-price contract is subject to simplified acquisition procedures under FAR Part 13, with an anticipated award date of August 28, 2026, and work expected to begin no later than 10 business days after award. Mandatory labor standards under the Davis-Bacon Act require payment of prevailing local wages, and subcontracting is limited to 85% of total work under FAR 52.219-14. Contractors must secure all permits, adhere to OSHA safety standards, and assume full responsibility for site conditions, material quality, and accident prevention. Payment procedures follow FAR 52.232-5, and the contract includes clauses for differing site conditions, material workmanship, and default, among others. A mandatory site visit occurred on July 29, 2026, and all proposals must be submitted electronically to Jerry.Lopez@uscg.mil by 3 p.m. on August 14, 2026. All offerors must maintain an active SAM registration with the
Base MIAMI(00028)

POSTED

about 6 hours ago

DEADLINE

in 16 days
View Details
NAICS: 238990
New
Federal
5660--DESIGN-BUILD CONSTRUCTION FOR UPGRADE PERIMETER SECURITY VA MEDICAL CENTER (VAMC), MARTINSBURG, WVThe Department of Veterans Affairs, through its Office of Construction & Facilities Management, is seeking a Design-Build contractor to upgrade perimeter security at the Capital Region Readiness Center located at the VA Medical Center in Martinsburg, West Virginia. This 100% Service-Disabled Veteran-Owned Small Business set-aside solicitation requires the contractor to design and install a comprehensive perimeter security system including fencing with anti-climb and anti-ram features, guard gates, bollards, and anti-ram vehicle barriers in strict compliance with the VA Physical Security and Resiliency Design Manual and VA Technical Information Library. The work encompasses full site verification including surveying and underground utility detection, along with all labor, materials, equipment, and installation necessary to meet federal security standards. Proposals must be submitted in two electronic PDF volumes—Volume I containing administrative and contractual documents, and Volume II detailing technical approach, past performance, and key personnel—following strict formatting, naming, and page limitations to avoid rejection. All submissions must be emailed to designated VA contracting officials by the deadline, with no exceptions to solicitation terms permitted within proposal volumes. Volume II is structured into three evaluation factors ranked in descending importance: Organizational/Technical Approach & Schedule, Past Performance, and Key Personnel. For the technical approach, offerors must demonstrate a clear, concise plan for managing design and construction activities with a detailed organizational chart, subcontractor roles and teaming agreements, and an enforceable quality control system including inspection and submittal registration controls. The contractor must perform at least 20% of the total work with its own forces as mandated by FAR 52.236-1. Past performance must include two to five recent projects of similar scope and complexity, each valued over $1 million, with verified experience in perimeter fencing, anti-ram barriers, and bollard systems, along with documented work on electrical substations and generator yards. Offers must provide completed Past Performance Questionnaires or CPARS evaluations and clearly state subcontractor contributions and teaming commitments. Key personnel requirements are stringent: the Project Superintendent and Project Manager must each have ten years of construction experience, the CQC System Manager must hold a relevant degree or PE license with four years of experience or eight years of on-site experience including one year in quality control, and the Site Safety and Health Officer must meet EM 385-1-1 standards with ten years of safety experience, five years in heavy construction on electrical facilities, OSHA 30-hour certification, and 24 hours of
Office Of Construction & Facilities Management (36C10F)

POSTED

about 6 hours ago

DEADLINE

in 6 days
View Details
NAICS: 238990
New
Federal
Repair Parking Area at the Grayling Air to Ground RangeThis solicitation, numbered W50S8626BA003, is a Firm Fixed Price invitation for bids issued under the Revolutionary FAR Overhaul to acquire commercial construction services for the repair of the Range Parking Area at the Grayling Air-to-Ground Gunnery Range in Frederic, Michigan. The requirement is set aside 100% for small businesses under NAICS code 238990, with an estimated contract value between $500,000 and $1,000,000. The contractor must furnish all personnel, equipment, materials, supervision, and quality control to complete the work in strict accordance with engineering design drawings and specifications, including construction of parking areas, erosion control systems, and stormwater infrastructure. Delivery and acceptance of the completed work will occur at the Grayling site, though all bids must be physically submitted by the deadline of 13 August 2026 at 11:00 AM Local Time to the bid box located at Alpena CRTC, Building 2022, as electronic submissions are prohibited. The period of performance is 365 calendar days after issuance of the Notice to Proceed, with an initial work start anticipated in August 2026. A single, mandatory site visit is scheduled for 28 July 2026 at the Grayling range; no other visits will be permitted. All questions must be submitted in writing by 5 August 2026 and will be answered via SAM.gov. The contract incorporates numerous FAR and DFARS clauses modified under Deviation 2026-O0038, including requirements for security compliance, quality control, site safety, and material standards such as MIL-STD-129 and MIL-STD-130, which dictate unique item identification via data matrix symbols and weather-protected labeling. Key personnel—including a project manager, site superintendent, quality control manager, and safety manager—must meet stringent experience criteria, and substitutions require prior written approval. All personnel must be U.S. citizens or legal residents, pass criminal background checks, carry government-issued photo identification, and comply with HSPD-12 and FIPS PUB 201 standards, including completion of AT Level I Awareness Training for access to National Guard installations. Contractors are subject to vehicle and personal searches, strict access controls, and mandatory safety attire while on-site. Invoicing must be conducted exclusively through WAWF, with
W7NF Uspfo Activity Miang Crtc

POSTED

about 6 hours ago

DEADLINE

in 15 days
View Details
NAICS: 238990
New
Federal
Installation of Electric High Tensile Wire FencingThis solicitation, identified as 1232SA26Q0939, is a combined synopsis and request for quotation issued under FAR Part 12 for the installation of electric high tensile wire fencing at the Prairie du Sac Agricultural Research Station in Wisconsin. The acquisition is a total small business set-aside under NAICS code 238990, with a small business size standard of $19 million, and is intended for award as a firm-fixed-price purchase order with an estimated value between $250,000 and $500,000. The work involves preparing and fencing Fields 1–3 as the base requirement, along with three optional areas that may be exercised after award, each tied to a separate contract line item number. The scope includes demolition and disposal of all existing fencing and debris, installation of five-strand perimeter fencing and three-strand interior fencing using wooden posts, and compliance with detailed specifications for hog wire fencing, electrical grounding systems, and utility coordination. Shop drawings and quality control documentation must be submitted for approval prior to installation, and all work must conform to specific material standards, with substitutions requiring prior written approval from the Contracting Officer. The solicitation is evaluated using the Lowest Priced Technically Acceptable (LPTA) method, where offerors must pass mandatory technical acceptability and past performance gates before price is considered. Technical acceptability requires full compliance with the Statement of Work, specifications, and all contract clauses, while past performance is deemed unacceptable if any negative evaluations exist within the last five years, including terminations for default, marginal or unsatisfactory ratings exceeding 10% in any CPARS category, or unsatisfactory reference responses. Quotations must be submitted via email to the designated USDA address by 10:00 AM local time on August 7, 2026, and must include a transmittal letter with the offeror’s SAM UEI, tax ID, and point of contact. A completed SF 24 bid bond is required, and selected offerors must be prepared to furnish performance and payment bonds. The contract includes numerous FAR and AGAR clauses covering labor standards, wage requirements, whistleblower protections, anti-trafficking, cybersecurity, and contract administration, with additional requirements for on-site supervision, safety compliance with OSHA, certified payroll records, and adherence to a 180-day performance window following award. All invoices must be submitted in original and copy form to both
USDA Ars Afm Apd

POSTED

about 6 hours ago

DEADLINE

in 9 days
View Details

More opportunities from International Boundary And Water Commission: Us-Mexico → US Embassy Panama City

Same awarding agency

NAICS: 335220
Federal
MAIN KITCHEN EQUIPMENTThis solicitation, numbered 19PM0726Q0007, was issued by the U.S. Embassy in Panama City under the Department of State to procure commercial kitchen equipment including two refrigerators, two freezers, and one gas charbroiler for installation at the Chief of Mission Residence in La Cresta, Panama City. All equipment must be new, fully compliant with NSF/ANSI 7 and other applicable safety and security standards including OSHA, EM 385-1-1, and 12 FAM, and delivered door-to-door with installation completed within 120 days of award. The offeror must possess or contract a local repair and maintenance capability in Panama and provide full documentation including manufacturer warranties, compliance certifications, and proof of SAM registration with a current Unique Entity Identifier. The contract employs a Lowest Price Technically Acceptable (LPTA) evaluation method, meaning the award will go to the lowest-priced offeror who meets the baseline technical requirements and is deemed responsible. Special requirements include mandatory disclosure of any artificial intelligence use during performance under DOSAR 652.239-801, adherence to security prohibitions under FAR 52.240-91, and compliance with payment and invoice submission rules under FAR 652.232-70. De facto OCI mitigations are embedded through transparency obligations and local presence mandates. Despite the detailed specifications and stringent compliance conditions, the solicitation was ultimately canceled via Amendment #4, with no contract value established and funding deemed insufficient. Proposals were required to be submitted electronically via email to PnmProcReq@state.gov by the extended deadline of May 21, 2026, with no web portal or physical submission method accepted.
Major Household Appliance Manufacturing

POSTED

7 days ago

DEADLINE

in 7 days
View Details