Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

NITROGEN PIPING REPLACEMENT FOR PLASMA SPRAY BOOTH

Active

FA812627Q0004_11032026Federal

Response Deadline11/09/2026, 06:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

Solicitation FA812627Q0004 is a request for quote from the Air Force Sustainment Center at Tinker Air Force Base, Oklahoma, for the replacement and installation of a 5,000 psi nitrogen gas piping system in Building 3001. The project requires the installation of high-pressure 316 Stainless Steel piping to connect a nitrogen generator, storage cylinders, regulator, and plasma spray booth, adhering to ASME B31.3 standards and Government Drawing 24E173. This is a 100% Small Business Set-Aside under NAICS code 811310, with a price evaluation preference for HUBZone Small Business Concerns. The contract will be awarded to the responsible vendor providing the lowest priced quote that meets all technical specifications. Key performance requirements include a hydrostatic test holding 7,500 psi for one hour and a pneumatic test demonstrating zero leaks at 5,500 psi for two continuous hours. Contractors must comply with strict safety standards, including OSHA regulations for hot work and fall protection, and follow MIL-STD-130 and MIL-STD-129 for item marking and shipment labeling. Administrative requirements include registration in the System for Award Management and the use of the Wide Area WorkFlow system for electronic invoicing. Quotations are due by November 9, 2026, and must include a technical proposal, cost pricing, and proof of technical evaluation criteria.

General Info

Air Force request for nitrogen gas piping installation at Tinker Air Force Base.

Agency

Department Of Defense → FA8126 Afsc Pzimb

NAICS

811310 - Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance

Place of Performance

0, OK, 73145, USA

Set-Aside

SBA

Documents

4

rfq

High

q-and-a

High

sow

High

wage-determination

High

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

PhaseCombined Synopsis

PostedNov 3

Combined Synopsis

Response DeadlineNov 9

Submission deadline

Response Deadline

11/09/2026, 06:00:00 PM UTCin 6 days

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → FA8126 Afsc Pzimb

Contacts2 people available

OfficeTINKER AFB, OK, 73145-3305, USA

Organization / AgencyDepartment Of Defense → FA8126 Afsc Pzimb

Office AddressTINKER AFB, OK, 73145-3305, USA

Contacts

Brian Eakers

contact@example.gov

Claude J. Boggs Jr

contact@example.gov

Full Description

Show more

A complete, leak-free nitrogen piping system connecting the nitrogen generator, storage cylinders, regulator, and plasma spray booth.

IAW PWS

Similar Contracts

Same NAICS industry code

Bus Fire Suppression System Maintenance

Solicitation # WMATA-0000010906

The Washington Metropolitan Area Transit Authority is seeking proposals for the maintenance of bus fire suppression systems under solicitation number WMATA-0000010906. This procurement falls under NAICS code 811310, focusing on commercial and industrial machinery and equipment repair. The solicitation was posted on November 3, 2026, with a very short response window requiring submissions by November 4, 2026. Interested parties can access further details and manage their bids through the official WMATA supplier portal.

Washington Metropolitan Area Transit Authority

POSTED

about 5 hours ago

DEADLINE

in about 21 hours

Equipment Cleaning and Compliance ServicesThe Equipment Cleaning and Compliance Services subcontract involves providing industrial steam cleaning and maintenance for prime contractors working on California Department of Water Resources projects. The primary objective is to utilize industrial pressure washers to clean equipment before delivery, effectively preventing the spread of contaminants and invasive species. Additionally, the contractor is responsible for performing routine maintenance to ensure all equipment remains in good working order and adheres to specified hour-of-operation limits. This opportunity is categorized under NAICS code 811310 and requires the delivery of certified clean and maintained equipment. Interested parties must submit their responses by the deadline of December 9, 2026. The contract is managed through the California Department of Water Resources and focuses on maintaining strict environmental and operational compliance for heavy machinery used in state projects.

California Department of Water Resources

POSTED

about 5 hours ago

DEADLINE

in about 1 month

Specialty Welding Services

Solicitation # IFB27000085

Solicitation IFB27000085 is an Invitation for Bids issued by the Chesterfield County Procurement Department in Virginia for as-needed specialty welding services to support the County and Chesterfield County Public Schools. The scope of work involves the fabrication of metal structures and repair of machinery and equipment using electric arc and gas welding for carbon steel, aluminum, and stainless steel. Services may be performed in industrial settings, such as wastewater treatment plants, requiring expertise in Lock Out Tag Out, Confined Space, and Hot Work procedures. The County intends to make multiple awards to the lowest responsive and responsible bidders, with work assigned on a rotating schedule. Bidders must provide personnel with extensive certifications, including SMAW, GMAW, and FCAW-G, adhering to AWS and ASME standards. Key requirements include the provision of designated fire watch personnel for each project and the procurement of hot work permits from the County Project Manager. The pricing structure is based on hourly rates for certified welders and welder helpers, both regular and overtime, which must be inclusive of all overhead, insurance, and mobilization costs. Bids are due by December 7, 2026, at 2:00 P.M., and must remain binding for sixty calendar days. Payment is preferred through the ePayables program, though checks are available as an alternative.

Chesterfield County

POSTED

about 5 hours ago

DEADLINE

in about 1 month

Hoist and Crane Inspection and Repair ServicesThis 8(a) set-aside subcontract involves providing comprehensive hoist and crane inspection and repair services for prime contractors on Department of Defense projects at Hurlburt Field, Florida. The scope of work includes initial inspections, routine and emergency repairs, and preventative maintenance for 112 units. The contractor is responsible for conducting official load testing using specialized equipment and lifts to ensure all machinery is fully operational and certified. Key deliverables include the provision of certified operational equipment and detailed inspection reports. To qualify, the contractor must possess the necessary certification authority for hoists and cranes and be able to pass base access vetting. This project falls under NAICS code 811310 and is managed by the FA4417 1 Socons agency.

FA4417 1 Socons

POSTED

about 10 hours ago

DEADLINE

Maintenance of Classified Material Destruction EquipmentThis subcontract involves providing preventative and corrective maintenance for high-security shredders and disintegrators supporting U.S. Navy NAVSCOLEOD projects at Eglin Air Force Base in Niceville. The scope of work includes repairing specific equipment models from SEM, Fellowes Powershred, HSM Securio, and Olympia to ensure all machinery remains fully operational. The selected provider must deliver detailed maintenance logs as part of the project deliverables. Strict security and access requirements are in place, necessitating a DBIDS credential for base entry and full compliance with DoDD 5200.01-R and DoDM 5205.02-M security standards. Managed under NAICS code 811310 for the Department of Defense via Navsup Flc Jacksonville, the contract requires a response by November 11, 2026.

Navsup Flc Jacksonville

POSTED

about 10 hours ago

DEADLINE

Bobcat T870 Hydraulic Pump and Final Drive Overhaul

Base Portsmouth

POSTED

about 10 hours ago

DEADLINE

ON GOING MAINTENANCE

Solicitation # N0016427Q0013

The Naval Surface Warfare Center (Crane) is soliciting quotes for ongoing maintenance of specific equipment, identified by serial numbers X, Y, and Z, under solicitation N00164-27-Q-0013. This requirement is a 100% small business set-aside under NAICS code 811310 and is structured as a firm fixed price lot. The scope of work includes providing all necessary labor, materials, supplies, equipment, supervision, and transportation, with a specific requirement for Connex Coating. All work must be performed in accordance with the provided salient characteristics and final quality inspection assurance must meet ISO 9001:2015 standards. The period of performance is five weeks from the date of award, with delivery terms set as FOB Destination at the NSWC Crane facility in Indiana. Proposals are due by November 10, 2026, at 4:00 PM Eastern Time and must be emailed to the designated point of contact. Award will be made to the responsible offeror whose proposal is most advantageous to the government, with evaluation focusing on price and past performance. Additionally, a price evaluation preference is available for HUBZone small business concerns. Contractors must be registered in the System for Award Management and utilize the Wide Area Workflow system for electronic invoicing and payment processing.

POSTED

about 10 hours ago

DEADLINE

J059--TUCSON CMOP VLM MAINTENANCE CONTRACT

Solicitation # 36C77027Q0012

The Department of Veterans Affairs, National CMOP Office, intends to award a firm fixed price sole source contract to Pacific Integrated Handling (PIH) for the maintenance of Modula Vertical Lift Modules (VLMs) located at the Tucson SW CMOP. Under the authority of FAR 13.501(a) and VAAR 819.7007, this procurement covers preventative maintenance, unscheduled repair services, emergency support, and manufacturer-authorized remote technical assistance and telephone support. The solicitation is identified by number 36C77027Q0012 and falls under NAICS code 811310. The justification for this sole source award is based on the requirement to maintain the manufacturer's warranty for the VLMs. Because the Modula support agreement stipulates that warranties may be terminated if the equipment is serviced, modified, or repaired by unauthorized personnel or if unauthorized parts are installed, PIH is identified as the only company capable of providing these services without invalidating existing warranties. The contracting office is located in Leavenworth, Kansas, and the response deadline for this notice is November 5, 2026.

National Cmop Office (36C770)

POSTED

about 10 hours ago

DEADLINE

Provide Bobcat Loader repair for the USCG Base Portsmouth

Solicitation # 31040RFQ270000018

Solicitation 31040RFQ270000018 is a total small business set-aside for the Department of Homeland Security, specifically USCG Base Portsmouth, to provide comprehensive repair and maintenance for one government-owned Bobcat T870 Compact Track Loader. The scope of work includes round-trip transportation of the equipment to an authorized repair facility, a full diagnostic assessment of hydraulic and drive systems, and the replacement of the main hydraulic pump and final drive assemblies. All work must utilize genuine Bobcat OEM parts and meet OEM specifications, including a required hydraulic system flushing and calibration. The contractor must provide a minimum one-year warranty on all parts and labor, with a total period of performance not to exceed 90 working days from the date of award. The government will award a firm-fixed price contract based on the lowest price technically acceptable (LPTA) criteria. Offerors must submit a technical approach demonstrating their ability to meet the Statement of Work requirements via the SF-18 by 5:00 PM Eastern Time on November 10, 2026. A site visit is scheduled for November 5, 2026, at USCG Base Portsmouth, requiring advance coordination and security clearance. Invoicing must be processed through the Invoice Processing Platform (IPP) in accordance with the Prompt Payment Act. Eligible contractors must maintain active registration in the System for Award Management (SAM) and comply with OSHA and DOT safety regulations.

Base Portsmouth

POSTED

about 10 hours ago

DEADLINE

FIRE EXTINGUISHER INSPECTION, MAINTENANCE, RECHARGE, REPAIR, HYDROSTATIC TESTING

Solicitation # W5S09H27QA991

Solicitation W50S9H27QA991 is a total small business set-aside for a five-year Blanket Purchase Agreement to provide portable fire extinguisher inspection, maintenance, recharge, repair, and hydrostatic testing services for the Volk Field Air National Guard Base in Camp Douglas, Wisconsin. The anticipated period of performance runs from December 15, 2026, to December 14, 2031. The contractor is responsible for all management, labor, equipment, and transportation required to pick up extinguishers, perform necessary services at their place of business, and return them to the base. All work must comply with the most current edition of NFPA 10, manufacturer specifications, 49 CFR, and DOT/PHMSA regulations, as well as Wisconsin local environmental laws. The government will award a single BPA based on the lowest price, without discussions. Offerors must be registered in the System for Award Management and submit their quotes via email by December 2, 2026, at 1:00 PM CST. Required deliverables include the completion of a Vendor Pricing Worksheet covering routine maintenance and hydrostatic testing for various extinguisher sizes, ranging from 5 lb to 2000 lb units. The contract requires a minimum 180-calendar-day warranty on parts and labor. Invoicing is permitted only after services are completed, extinguishers are returned, and all required documentation and manifests have been submitted.

W7N8 Uspfo Activity Wiang Crtc

POSTED

about 10 hours ago

DEADLINE

10th CAB Unit Maintained Equipment Maintenance

Solicitation # W911S227QA007

Solicitation W911S227QA007 is a competitive 8(a) set-aside for a Firm-Fixed-Price contract to provide qualified labor, management, and supervision for the 10th Combat Aviation Brigade (10CAB) Unit Maintained Equipment (UME) program and Supply Support Activity (SSA) at Fort Drum, New York. The contractor is responsible for operating and managing equipment repair facilities across four designated motor pools, providing field-level maintenance, technical inspections, and both scheduled and unscheduled repairs to ensure equipment meets Army 10/20 Technical Manual standards. The scope of work includes the use of the GCSS-A LIS system for reporting and dispatch, with a performance metric requiring 98 percent of completed work to meet first-time government acceptance standards. The contract requires a designated Project Manager as key personnel who must be physically on-site and possess full corporate authority. Labor requirements are based on an estimated annual workload of 71,910 productive hours, utilizing various Service Contract Act labor categories including Heavy Equipment Mechanics and SSA Supply Technicians. Award will be based on the most advantageous offer, evaluating technical acceptance through experience and capability statements, price, and past performance via CPARS. The period of performance is 12 months starting December 14, 2026, with quotes due by November 5, 2026, via the PIEE Solicitation Module.

W6QM Micc-Ft Drum

POSTED

about 10 hours ago

DEADLINE

Shredder Maintenance

Solicitation # N6883627Q0011

The Naval Supply Systems Command, Fleet Logistics Center Jacksonville, intends to award a sole source contract for shredder maintenance services to Southern Electro Mechanical Services, INC. to support the Naval School Explosive Ordnance Disposal (NAVSCOLEOD) at Eglin Air Force Base, Florida. This procurement utilizes Simplified Acquisition Procedures under NAICS code 811310. The contractor is designated as the only regional authorized service and material provider capable of meeting the requirement, and the use of original equipment manufacturer materials is mandatory to preserve equipment warranties. The scope of work involves the maintenance of various shredders and disintegrators, including SEM, Fellowes, HSM, and Olympia models, across seven specific building locations at Eglin AFB to ensure the operational availability of machinery used for destroying sensitive and classified materials. The contract is structured with a base period of 12 months starting December 1, 2026, followed by four optional 12-month extension periods, potentially extending the performance through November 30, 2031. All maintenance activities must comply with strict security and privacy standards, including the Privacy Act of 1974, the Gramm-Leach-Bliley Act, and various Department of Defense and SECNAV regulations regarding information and operations security. While this is intended as a sole source award, the government has issued a notice for any eligible sources to provide evidence of their ability to fulfill the requirement by November 11, 2026, before a final determination is made.

Navsup Flc Jacksonville

POSTED

about 10 hours ago

DEADLINE

More opportunities from Department Of Defense → FA8126 Afsc Pzimb

Same awarding agency

316 Stainless Steel High-Pressure Pipe and Fittings Supply

Computer and Computer Peripheral Equipment and Software Merchant Wholesalers

POSTED

about 10 hours ago

DEADLINE

High-Pressure 316 Stainless Steel Piping Installation

Plumbing, Heating, and Air-Conditioning Contractors

POSTED

about 10 hours ago

DEADLINE

316L Stainless Steel Tubing SupplierThis subcontract opportunity is for the supply of high-pressure, annealed seamless 316L stainless steel tubing to support prime contractors on Air Force Sustainment Center projects located at Tinker AFB. The required materials include tubing in 3/4 inch OD with 0.109 inch wall thickness, as well as 1/2 inch and 1/4 inch sizes. All delivered products must be certified and strictly adhere to ASTM A269 specifications and MIL-STD-129 marking and labeling standards. Managed by the Department of Defense under agency FA8126 Afsc Pzimb, this procurement is designated as a total Small Business Set Aside under NAICS code 331210. The solicitation was posted on November 2, 2026, with a response deadline of November 9, 2026. Performance for this contract is centered in the 73145 zip code area.

Iron and Steel Pipe and Tube Manufacturing from Purchased Steel

POSTED

DEADLINE

High-Pressure Nitrogen Piping ContractorThis subcontract opportunity is for a Small Business Set Aside to perform demolition and installation of high-pressure nitrogen gas piping for the Air Force Sustainment Center at Tinker AFB. The selected contractor will be responsible for removing unserviceable piping and installing 316 Stainless Steel lines to connect generators, storage cylinders, and plasma spray booths in accordance with drawing 24E173. The project requires strict adherence to ASME B31.3 standards to deliver a certified, leak-free piping system. A critical component of the scope of work includes conducting hydrostatic pressure testing up to 7,500 psi. This effort falls under NAICS code 238220 and is managed by the Department of Defense.

Plumbing, Heating, and Air-Conditioning Contractors

POSTED

DEADLINE

NITROGEN PIPING REPLACEMENT FOR PLASMA SPRAY BOOTH

Solicitation # FA812627Q0004

Solicitation FA812627Q0004 is a request for quote issued by the Air Force Sustainment Center at Tinker Air Force Base, Oklahoma, for the replacement and installation of a 5,000 psi nitrogen gas piping system in Building 3001. The project requires the contractor to provide all labor, materials, and expertise to demolish existing unserviceable piping and install a new high-pressure system using 316L stainless steel annealed seamless tubing. The system must connect the nitrogen generator, storage cylinders, regulator, and plasma spray booth in strict accordance with government drawing 24E173 and ASME B31.3 standards. A critical performance requirement includes hydrostatic pressure testing of the new piping up to 7,500 psi to ensure a leak-free installation. This is a 100% Small Business Set-Aside contract with a ten percent price evaluation preference for HUBZone small business concerns. The government intends to award a single purchase order to the responsible vendor offering the lowest price that meets all technical specifications. The period of performance is 60 days after receipt of award. Contractors must comply with stringent marking and labeling requirements, including MIL-STD-129 for uniquely identified items and OSHA-compliant HAZMAT labeling. Final acceptance is contingent upon the submission and approval of a project schedule, material specifications, hydrostatic test results, and personnel certifications. Invoicing and payments will be processed electronically through the Wide Area WorkFlow system.

Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance

POSTED

DEADLINE

Trumpf/Pilz OEM Replacement Parts SupplierThis subcontract involves the supply of Original Equipment Manufacturer components for prime contractors supporting Air Force Sustainment Center projects. The scope specifically requires the sourcing of Trumpf interface components and Pilz safety modules in accordance with established TT&E reports, with all certified parts to be delivered to Tinker AFB. The agreement mandates strict adherence to military standards, specifically MIL-STD-130 for unique item identification and MIL-STD-129 for packaging and shipment labeling. Managed under NAICS code 423830 for the Department of Defense, the contract ensures that all critical safety and interface hardware meets rigorous government specifications for sustainment operations.

Industrial Machinery and Equipment Merchant Wholesalers

POSTED

DEADLINE

Pilz Safety Controller Reprogramming ServicesThis subcontract for Pilz Safety Controller Reprogramming Services supports prime contractors on Air Force Sustainment Center projects under the Department of Defense. The scope of work involves the specialized programming and configuration of integrated Pilz safety controllers, specifically focusing on validation and integration with Trumpf TrumaBend V170X hardware. Key technical requirements include conducting Test, Teardown, and Evaluation (TT&E) and the recovery of lost original programs using proprietary Pilz software. The selected provider must ensure strict adherence to DFARS 252.204-7012 compliance standards. Final deliverables for the project consist of a fully programmed controller and a comprehensive TT&E evaluation report. The opportunity is categorized under NAICS code 811210, with a response deadline of November 6, 2026.

Electronic and Precision Equipment Repair and Maintenance

POSTED

DEADLINE

Trumpf Pilz Programming Service

Solicitation # FA812627Q0003

The Air Force Sustainment Center at Tinker Air Force Base, Oklahoma, is seeking a Firm-Fixed-Price contract for a one-time programming service to reprogram and configure the integrated Pilz safety controller for a Trumpf TrumaBend V170X, serial number B0105A0093. The contractor is required to perform Test, Teardown, and Evaluation on the part and submit an evaluation report to the government within one business day. The period of performance for this service is scheduled from November 15, 2026, to November 14, 2027. Award decisions will be based on a technical proposal and cost/price evaluation, with a 10 percent price preference granted to HUBZone small business concerns. The contractor must comply with strict packaging and marking standards, including MIL-STD-130 for unique item identification and MIL-STD-129 for shipment labeling. Additionally, the contractor must adhere to cybersecurity reporting under DFARS 252.204-7012 and provide all necessary quality control and inspection manuals. Invoicing and payment will be processed electronically through the Wide Area WorkFlow system.

Electronic and Precision Equipment Repair and Maintenance

POSTED

DEADLINE

Independent Calibration & Certification Services (Future Potential)The contract pertains to independent calibration and performance certification of electron microscopes using traceable standards, intended for potential future use should the government elect to pursue depot-level maintenance or open the requirement to competition. This service is critical to ensuring the accuracy and reliability of electron microscope operations, with all calibrations tied to nationally or internationally recognized traceable standards to guarantee measurement integrity. The work is linked to a NAICS code of 541380, indicating it falls under scientific and technical consulting services, and is managed by the Department of Defense under the office FA8126 Afsc Pzimb, with performance expected to occur in the 73145 zip code area. Although currently listed as a subcontract opportunity with no solicitation number or set-aside details, it remains a pending requirement that may be activated based on future maintenance strategies or competitive bidding decisions.

Testing Laboratories and Services

POSTED

DEADLINE

On-Site Technical Support for Precision Laboratory InstrumentsThe contract is for on-site technical support services focused on high-maintenance scientific instruments located at government facilities, with a primary emphasis on emergency repairs, troubleshooting, and performance validation. Services are required to be provided on-call and in-person to ensure continuous operational readiness of precision laboratory equipment critical to defense-related research and testing activities. The work is governed under NAICS code 541715, indicating it falls under scientific research and development services, and is structured as a subcontract within the broader framework of the Department of Defense’s procurement system. The place of performance is identified as a facility in Oklahoma City, Oklahoma, with a ZIP code of 73145, suggesting the support must be delivered directly at that location. The contract was posted on July 28, 2026, and is managed under the FA8126 Afsc Pzimb office, indicating oversight by a U.S. Air Force contracting entity. While no solicitation number is provided, the UI link directs to the SAM.gov portal for official documentation and submission purposes. The requirement implies a high degree of technical expertise, rapid response capability, and clearance to work in secure government environments. There is no set-aside designation specified, meaning participation is open to all qualified contractors without restrictions based on size or socioeconomic status. All support must meet stringent standards for instrument accuracy, safety, and uptime to sustain mission-critical operations.

Research and Development in the Physical, Engineering, and Life Sciences (except Nanotechnology and Biotechnology)

POSTED

DEADLINE

High-Precision Diagnostic Equipment Parts SupplyThe contract entails the supply of authentic, JEOL-certified replacement and maintenance parts for the JSM-IT300LV scanning electron microscope, covering critical components such as electron optics, vacuum seals, detectors, and control boards, ensuring continued operational integrity and performance fidelity. All parts must meet stringent quality and authenticity standards as validated by JEOL, with delivery and installation aligned to support uninterrupted use in high-precision diagnostic applications. Performance is required at a location with ZIP code 73145, under the oversight of the Department of Defense’s FA8126 Afsc Pzimb office, and the contract is classified as a subcontract within the NAICS code 334517 for other electronic instrument manufacturing. The posting date indicates the opportunity was issued in 2026, and though no solicitation number is provided, the official listing can be accessed through the SAM.gov platform via the specified URI. The agreement emphasizes compliance with certified OEM specifications to maintain system calibration, safety, and resolution standards critical to defense-related research and analysis.

Irradiation Apparatus Manufacturing

POSTED

DEADLINE

OEM Preventative Maintenance & Calibration ServicesThe contract entails biannual on-site preventative maintenance and calibration services for a JEOL JSM-IT300LV scanning electron microscope, performed using proprietary tools, specialized software, and authentic original equipment manufacturer parts to guarantee optimal performance, measurement accuracy, and long-term reliability. All service activities must be conducted at the designated location in Oklahoma City, with a zip code of 73145, ensuring minimal downtime and uninterrupted operational readiness for critical applications. Services are provided under a subcontract classification within the NAICS code 811210, which pertains to electronic equipment repair and maintenance, and are managed by the Department of Defense through the FA8126 Afsc Pzimb office. The work is scheduled to occur twice per year on a fixed cycle, with compliance and quality control ensured through adherence to manufacturer-specified protocols and the exclusive use of OEM components. The contract was posted on July 28, 2026, and all servicing must align with the technical requirements specified by the equipment manufacturer to maintain system precision and warranty integrity.

Electronic and Precision Equipment Repair and Maintenance

POSTED

DEADLINE

Earlier notices in this NAICS code

Posted before this notice, open and closed

Annual Inspection Maintenance of Manlifts

Solicitation # 70ZH1526QCGA00002

POSTED

about 10 hours ago

DEADLINE

Hoist and Cranes Maintenance Services FY27

Solicitation # FA441727R0003

FA4417 1 Socons

POSTED

about 10 hours ago

DEADLINE

Chancery and CMR Generator Preventative Maintenance Services

Solicitation # 19CA5227Q0003

Usembassy Ottawa

POSTED

about 10 hours ago

DEADLINE

Industrial Lubrication Services (MIL-PRF-10924)

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

DEADLINE

Equipment Maintenance & Inspection Services

241-NETWORK Contract Office 01 (36C241)

POSTED

DEADLINE

Sullair Screw Compressor Maintenance and Repair Services

Reclamation Contracting Activity

POSTED

DEADLINE

Boiler Combustion Analysis, Calibration, and Commissioning

POSTED

DEADLINE

Diesel Engine Hot Lube Oil Flush

POSTED

DEADLINE

SSDG Crankshaft Renewal

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS