Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, September 16 at 2:00 PM EDT

Register Free →

Repair or Replace Switchgear 4A at VAMC Central Western MA

Active
36C24126Q0814Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

General Info

Agency

Department Of Veterans Affairs → 241-NETWORK Contract Office 01 (36C241)View Agency

NAICS

811310 - Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and MaintenanceView NAICS

Place of Performance

Leeds, MA, 01053, USA

Set-Aside

SBA

Documents

(4)

Combined+Synopsis_Solicitation+36C24126Q0814.docx

DOCX

QASP+for+Generator+4A+Switchgear+Repair+or+Replacement.docx

DOCX

P07+SAM.gov+WD+2015-6115+Rev.+5+8-17-2026.pdf

PDF

Kohler switchgear wiring diagrams

PDFspecifications

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseCombined Synopsis
Posted

Combined Synopsis

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Veterans Affairs → 241-NETWORK Contract Office 01 (36C241)
Contacts1 person available
OfficeTOGUS, ME, 04330, USA
Organization / Agency
Department Of Veterans Affairs → 241-NETWORK Contract Office 01 (36C241)
View Agency Profile
Office AddressTOGUS, ME, 04330, USA
Contacts
Juliette Buchanan

Full Description

Show more

See the attached Combined Synopsis/Solicitation for 36C24126Q0814.

Similar Contracts

Same NAICS industry code

NAICS: 811310
New
1089 – Cafeteria freezer #1 & Cooler #4 Replacement
Solicitation # 26-137
This subcontracting opportunity for the Atterbury Job Corps Center in Edinburgh, Indiana, involves the full removal and replacement of Cafeteria Freezer #1 and Cooler #4. Freezer #1 requires replacement due to significant frame and door damage causing freeze-ups, while Cooler #4 must be replaced due to an inoperable unit, drainage backups, and a sagging ceiling. Additionally, the project includes correcting the exit door of the main Electrical Room to ensure compliance with NEC 2020 110.26.C (3) by installing panic hardware and ensuring the door opens toward the egress. The project is a single lump sum contract and is set aside for various small business categories, including SDB, WOSB, HUBZone, and SDVOSB. Bidders must attend a mandatory site visit on September 3, 2026, and submit proposals by September 11, 2026. Award decisions will be based on best value rather than the lowest price. Requirements include a valid Indiana Contractor's License, compliance with the Davis-Bacon Act (WD # IN20260002), and adherence to EPA and OSHA regulations. Contractors must provide a sequenced construction schedule within 10 days of the Notice to Proceed and start work within 14 days. Deliverables include all necessary training, operating manuals, and keys, with a one-year guarantee of workmanship and manufacturer warranties. Proposals must include a detailed cost breakdown, a 90-day bid guarantee, and proof of specific automobile liability and workers' compensation insurance naming Adams & Associates, Inc. as an additional insured.
Adams & Associates, Inc.

POSTED

about 6 hours ago

DEADLINE

in 1 day
View Details
NAICS: 811310
New
Federal
Water Tanker/Pump Repair
Solicitation # FA930126Q0030
Solicitation FA930126Q0030 is a small business set-aside request for quote for the repair and replacement of a structurally degraded agent water tank assembly and associated components on a 2011 International 7400 Fire Department Water Tender (registration 11L00144). The vehicle, which features a 4,000-gallon Pro-Poly America tank, has suffered from leaks and structural sagging. The scope of work includes the complete removal of the failing assembly, installation of a new tank capable of supporting maximum load without bowing, system integration of all plumbing and valves, and full exterior restoration including specialized painting and coating to match Fire Department specifications. All work must be performed at the contractor's facility and must meet or exceed KME manufacturer specifications as well as NFPA 1901, NFPA 1911, ASTM D1998, and OSHA 29 CFR 1910 standards. The government will award the contract based on a comparative evaluation of technical capability, past performance, price, delivery, and warranty to determine the best overall value. Vendors must demonstrate proven experience servicing KME fire apparatus and possess the necessary tooling and diagnostic capabilities. The estimated period of performance is 240 days after receipt of order. Quote submissions are due by September 8, 2026, at 4:00 PM PST, though this deadline may be moved up to September 4 if no site visits are requested by August 24. All submitted quotes must remain valid for at least 30 days.
FA9301 Aftc Pzio

POSTED

about 10 hours ago

DEADLINE

in 6 days
View Details
NAICS: 811310
New
Federal
PKB 90 MXG Air Compressor Audit
Solicitation # FA461326Q1054
The Department of the Air Force, through the 90th Contracting Squadron at F.E. Warren AFB, Wyoming, is seeking qualified small businesses to perform an audit of existing air compressor systems and associated lines to support a planned transition from 135 PSI to 200 PSI. This pre-solicitation notice initiates a Total Small Business Set-Aside under NAICS code 811310 with a $12.5 million size standard, and the contract is expected to be awarded as a Firm-Fixed-Price agreement using the Lowest-Price Technically Acceptable methodology. The audit must result in a comprehensive report identifying findings relevant to upgrades or replacements, with delivery required within 21 calendar days of contract award. All offerors must be registered in SAM.gov and comply with CMMC Level 1 requirements, submitting their Unique Identifier to verify compliance. The evaluation process will prioritize the three lowest-priced quotes if three or more are received, and the government reserves the right to award without discussions. Vendors must adhere to applicable ASME Code and OSHA standards, and proposals must include a valid quote demonstrating technical capability. The solicitation window opens with this notice and closes on July 30, 2026, with award anticipated in July 2026. Only small businesses are eligible to compete as this is a total set-aside, and no discussions will be held unless deemed necessary by the Government. Primary contact for questions is 1st Lt Shane Yurkus, with Donna Doss as the contracting officer. Prospective bidders are encouraged to review the Statement of Work and ensure full compliance with all technical, regulatory, and cybersecurity requirements prior to submission.
FA4613 90 Cons Pk

POSTED

about 10 hours ago

DEADLINE

in 9 days
View Details

More opportunities from Department Of Veterans Affairs → 241-NETWORK Contract Office 01 (36C241)

Same awarding agency

NAICS: 325120
New
Federal
6835--Bulk Oxygen Contract
Solicitation # 36C24126Q0547
The contract solicitation 36C24126Q0547, titled 6835–Bulk Oxygen Contract, is a Service-Disabled Veteran-Owned Small Business Set-Aside under NAICS Code 325120, issued by the Department of Veterans Affairs through the 241-NETWORK Contract Office 01 in Togus, Maine, for the provision of medical-grade bulk liquid oxygen and associated tank rental services to the VA White River Junction Healthcare System in Vermont. The procurement is structured as a Firm Fixed Price Quote with a five-year total term, consisting of a one-year base period and four optional one-year periods, and requires the contractor to supply an estimated annual volume of 6,055,000 Standard Cubic Feet of oxygen without a guaranteed purchase commitment. The contractor must provide and maintain all equipment, including primary and reserve bulk tanks, a reserve bottle bank, a local alarm panel, and a telemetry monitoring system, ensuring compliance with NFPA 50 and NFPA 99 standards, OSHA safety requirements, and FDA Current Good Manufacturing Practices for medical gas manufacturing and labeling as outlined in 21 CFR Part 201. All medical gas manufacturers and fillers must be registered with the FDA as drug manufacturers, and the contractor is responsible for all inspections, maintenance, and verification of gauges and telemetry devices, providing written documentation prior to initial filling and annually thereafter. The contractor assumes full liability for the integrity, safety, and suitability of all owned equipment at no additional cost to the government. The solicitation mandates strict compliance with federal acquisition regulations, including FAR 52.212-4 and its tailored instructions in Attachment 2, as well as VA-specific clauses such as 852.219-73 and 852.219-76, which enforce total set-aside status and subcontracting limitations requiring a signed certification of compliance. Offerors must maintain active SAM.gov registration with a unique entity identifier, complete all required representations and certifications electronically via SAM.gov under FAR 52.212-3, and submit a technically complete proposal including detailed pricing, terms of warranty, and a clear statement of agreement with all solicitation terms. Quotations must be submitted electronically by 5:00 PM EST on July 31, 2026, and include the solicitation number, company details, technical description, and pricing. The Contracting Officer
Industrial Gas Manufacturing

POSTED

about 10 hours ago

DEADLINE

in 7 days
View Details
NAICS: 238220
New
Federal
J041--Condensate Pump Replacements
Solicitation # 36C24126Q0792
The Department of Veterans Affairs, VA Connecticut Healthcare System, is soliciting quotes for a firm-fixed-price contract to replace condensate pumps and associated piping at the West Haven VA Medical Center. This small business set-aside under NAICS 238220 requires the removal of defective pump skids from confined spaces in Building 1 (Mechanical Room SG182) and Building 2 (Mechanical Room G139) and the installation of new functioning skids. The scope includes installing new electrical services, controls, and BAS tie-ins, as well as providing insulation, flow indications, and startup and acceptance testing. All work must adhere to VHA Directive 1810(1), which prohibits cast iron fittings and pipe components, and requires the use of ASTM A193 bolts. To be eligible, bidders must have a field representative within 200 miles of the West Haven campus and possess OEM training for the specific equipment. The award will be based on best value, evaluating price, past performance (one to three references), and technical capability. Qualified offerors must be registered in the System for Award Management and VISTA. Submissions are due by September 9, 2026, at 10:00 AM EST via email. The contractor must provide a minimum two-year warranty on all parts and labor and ensure personnel meet OSHA certification requirements, including a 30-hour certification for the site competent person.
Plumbing, Heating, and Air-Conditioning Contractors

POSTED

about 10 hours ago

DEADLINE

in 5 days
View Details
NAICS: 334118
New
Federal
5836--Sorna CD Burner Acquisition Modification P0003 Combined Synopsis: SD/VOSB Set-Aside/RFQ Extension to 09/18/26 at 11:00 AM EDT Review Request for Brand Name
Solicitation # 36C24126Q0731
This procurement is a total Service-Disabled Veteran-Owned Small Business (SD/VOSB) set-aside for the acquisition of one Sorna Vertex 25ei Platform and integrated CD Burner for the VA Medical Center in Central Western Massachusetts. The system is required to replace an end-of-life unit and will be used by Radiology Diagnostic Imaging to produce medical-grade DICOM optical media. The package includes the Vertex 25ei platform, associated software, a pre-configured Windows 11 Professional PC, a UPS 1KVA tower, training manuals, and remote installation and training support. The government has specified a brand-name requirement for Sorna to ensure full system integrity and compatibility with existing PACS, VNA, RIS, and EMR systems. While a vendor requested consideration for a brand-equivalent alternative per FAR 11.105, the solicitation has been extended to September 9, 2026, at 4:30 PM EDT to allow subject matter experts to determine if an alternative brand can maintain full operational functionality without additional adaptations. The contract is categorized under NAICS code 334118 for Computer Peripheral Equipment and is subject to a non-manufacturer rule waiver. Eligible offerors must be VIP-verified SD/VOSBs with an active SAM registration and a Unique Entity Identifier. Award will be made to the responsible and capable SD/VOSB offering the lowest price. Delivery is set as FOB Destination to the Leeds, MA facility, with a requirement that delivery costs be less than $250.00 or rolled into the line-item pricing. Hardware delivery is expected within 30 days of award, with software installation occurring within five days of hardware operational status. The first year of maintenance is included via the OEM warranty, and any subsequent servicing will be handled through a separate contract.
Computer Terminal and Other Computer Peripheral Equipment Manufacturing

POSTED

about 10 hours ago

DEADLINE

in 9 days
View Details
NAICS: 339950
New
Federal
9905--Interior Wayfinding
Solicitation # 36C24126Q0639
The VA Manchester Medical Center is seeking a qualified Service-Disabled Veteran-Owned Small Business (SDVOSB) under solicitation 36C24126Q0639 to provide a turnkey interior wayfinding signage solution for its main hospital building in Manchester, New Hampshire. This firm-fixed-price contract involves the design, fabrication, removal of existing signs, and installation of new standardized signage across approximately 290,000 square feet. The scope includes the production of sub-directories, stair identification, overhead department and restroom signs, and directional signage, as well as the overall programming of the wayfinding system. All work must comply with ADA/ABA Accessible Design Standards, VA PG-18-10 Signage Design Manual guidelines, and relevant building and safety codes, including NFPA 99 and OSHA requirements. The project must be completed within 24 weeks of the contract award, with a structured design approval process requiring 25, 50, and 100 percent drawings before production begins. Award will be based on a comparative evaluation of technical quality, past performance, and total evaluated price. Key requirements include the use of specific motifs such as Eagle, Mountain, and Seacoast, and the provision of field-replaceable inserts for in-house reprinting. The contractor is responsible for all site preparation and must adhere to strict delivery protocols, as no on-site storage is available. Final payment is contingent upon the completion and acceptance of work following a formal walkthrough and punch list resolution.
Sign Manufacturing

POSTED

1 day ago

DEADLINE

in 7 days
View Details

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 650+ contractors already using CLEATUS