Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, September 30 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Siemens FireFinder XLS Inspection, Programming, and Repair

Active

Federal

Response Deadline09/24/2026, 03:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract, managed by the Department of Homeland Security's Sflc Procurement Branch 2, involves the inspection, grooming, and repair of Siemens FireFinder XLS Fire Alarm Control Panels for the USCGC HEALY in Seattle. The scope of work includes troubleshooting event logs, clearing communication errors, and programming HFP-11 smoke detectors using proprietary Siemens software, all while ensuring functionality aligns with Coast Guard Drawing 420-WAGB-801-001. The project is designated as a Total Small Business Set Aside under NAICS code 238220. To be eligible, the contractor must hold a Siemens technical representative certification and is responsible for delivering detailed inspection reports and detector lists. The solicitation was posted on September 17, 2026, with a response deadline of September 24, 2026.

General Info

DHS subcontract for Siemens fire alarm panel repair and inspection for USCGC HEALY.

Agency

Department Of Homeland Security → Sflc Procurement Branch 2(00085)View Agency

NAICS

238220 - Plumbing, Heating, and Air-Conditioning ContractorsView NAICS

Place of Performance

Seattle, WA, 98134, USA

Set-Aside

SBA

Documents

This scope was carved out of 70Z08526Q0028041.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

USCGC Healy Fire Alarm System troubleshooting

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedSep 17

subcontract

Response DeadlineSep 24

Submission deadline

Response Deadline

09/24/2026, 03:00:00 PM UTCin 5 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Homeland Security → Sflc Procurement Branch 2(00085)

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Homeland Security → Sflc Procurement Branch 2(00085)

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Performs inspection, grooming, and repair of FireFinder XLS Fire Alarm Control Panels for prime contractors on US Coast Guard vessel projects, here the USCGC HEALY. Troubleshoots event logs, clears communication errors, and programs HFP-11 smoke detectors using proprietary Siemens software. Verifies panel functionality per Coast Guard Drawing 420-WAGB-801-001. Requires Siemens technical representative certification. Delivers inspection reports and detector lists.

Similar Contracts

Same NAICS industry code

PIDC Project 3 - Dorm RTU Replacement and SCADA

Solicitation # 70CMSW26D00000004

Solicitation 70CMSW26D00000004 is a firm-fixed-price construction task order issued by U.S. Immigration and Customs Enforcement for the Port Isabel Detention Center in Los Fresnos, Texas. The project consists of two primary scopes of work: the replacement and upgrade of rooftop HVAC units for Alpha, Bravo, Charlie, and Delta dorms, and a SCADA system upgrade including the installation of two chemical feed pumps. The HVAC systems must be high quality, durable, and coastal weather resistant, while the SCADA system must comply with Texas Commission of Environmental Quality standards. The estimated magnitude of the project is between 1.2 million and 1.5 million dollars, with a period of performance of 365 days from the date of award. The contract is set aside for 8(a) Multiple Award Construction Contract holders and will be awarded to the offeror proposing the lowest total evaluated price. Key requirements include a one-year warranty for installation and craftsmanship, the provision of performance and payment bonds, and adherence to Davis-Bacon wage determinations for Cameron County. Due to the secure nature of the facility, all personnel must undergo rigorous employment screening, including criminal history and citizenship checks, and pass the DHS E-Verify program. The contractor must provide a qualified Project Manager with at least five years of federal contracting experience and submit a comprehensive quality control and safety plan for government approval.

Bristol Alliance of Companies

POSTED

about 7 hours ago

DEADLINE

2026-Clearfield-Bldg E8 Welding HVAC

Solicitation # 2026- Clearfield- Welding Bldg. E8 HVAC Replacement

Management & Training Corporation (MTC) is seeking fixed-price lump sum bids for a subcontracting opportunity to replace the HVAC system at the Clearfield Job Corps Center, specifically for Building E8 Welding in Clearfield, Utah. The scope of work includes the complete change-out of the existing motor, provision of all necessary wiring, conduit, breakers, and rigging services, and ensuring the system is fully operational post-installation. Key deliverables include startup and testing documentation, as well as onsite training for maintenance personnel. All work must comply with OSHA requirements, federal, state, and local codes, and site safety procedures. This is a small business set-aside opportunity under NAICS code 238220. Bids will be evaluated based on overall best value, and a physical site visit and signature on the attendance roster are mandatory for consideration. Required submission documents include the MTC Bid for Lump Sum Contract form, a detailed cost breakout on company letterhead, and a bid bond guarantee. The deadline for submission via email to the designated points of contact is September 19, 2026, at 3:00 PM MST. The contract requires adherence to Davis-Bacon prevailing wage rates for Davis County, Utah, and incorporates various FAR clauses, including those regarding the Buy American Act and combating trafficking in persons. Awarded contractors must provide a 12-digit Unique Entity ID (UEI) and a 9-digit Tax ID. Payment will be processed via pay applications using AIA G702 and G703 forms based on a submitted Schedule of Values. Performance and payment bonds must be submitted within five business days of the Intent to Award letter.

Management & Training Corporation

POSTED

about 7 hours ago

DEADLINE

in about 10 hours

Joliet JCC Dorm Bathroom Renovations

Solicitation # joliet-jcc-dorm-bathroom-renovations

Management & Training Corporation (MTC), operator of the Joliet Job Corps Center for the US Department of Labor, is seeking a subcontractor for the renovation of thirty-two female dorm room bathrooms in Joliet, Illinois. This fixed-price, single lump sum contract, with an estimated value between $100,000 and $250,000, falls under NAICS 238220. The scope of work includes providing all labor, materials, and equipment to rod and clear sanitary drain lines and replace existing shower assemblies with Delta Hydrof ProCrylic units or comparable alternatives. The project must be completed within 60 consecutive business days following a written Notice to Proceed. Bids are due by September 23, 2026, and must be submitted via email. To be considered, bidders must have completed a mandatory site visit and provided a detailed cost breakout on company letterhead. Required documentation includes a bid bond of 20% for bids over $25,000, a completed MTC Supplier Packet, and a signed SF1413 form. Award decisions will be based on overall best value. The contractor must adhere to strict regulatory and administrative requirements, including paying prevailing wages per Executive Order 13658 and submitting weekly certified payroll reports. Insurance minimums include $1 million per occurrence for general liability, $1 million for auto insurance, and $500,000 for workers compensation. Additionally, performance and payment bonds from a surety with at least an A- rating are required for awards of $25,000 or more. Final payment is contingent upon the submission of two sets of operation and maintenance manuals and the successful completion of a final inspection.

Joliet Job Corps

POSTED

about 7 hours ago

DEADLINE

CBP7664 Wellness HVAC Compressor Replacement

Solicitation # CBP7664

Management & Training Corporation is seeking bids for a subcontracting opportunity to replace a failed HVAC/refrigeration compressor at the Wellness facility of the Sierra Nevada Job Corps Center in Reno, Nevada. The project, identified as CBP7664, requires the contractor to provide all labor, materials, equipment, and supervision to restore full cooling capacity and operational efficiency. The scope of work is divided into four phases: preparation and environmental safety, demolition and removal, installation of an OEM-specified compressor, and system testing and commissioning. The awarded contractor must complete all work within 30 consecutive business days following the written Notice to Proceed. Bids will be evaluated based on overall best value, considering price, quality, and delivery schedule. Interested bidders must conduct a mandatory site visit and sign an attendance roster before submitting a lump sum bid and detailed cost breakout. For bids equal to or greater than 25,000 dollars, a bid bond of 20 percent is required, as well as performance and payment bonds from an A-rated surety company. The contract is subject to various federal regulations, including the Davis-Bacon Act for prevailing wage compliance in Washoe County, EPA Section 608 for refrigerant recovery, and FAR reporting requirements for first-tier subcontractors if the award exceeds 40,000 dollars. This opportunity is set aside for various small business categories, including SDB, WOSB, HUBZone, and SDVOSB.

Sierra Nevada Job Corps Center

POSTED

about 7 hours ago

DEADLINE

AAL-0880-02 HVAC and Electrical Upgrades Fairbanks

Solicitation # AAL-0880-02

Solicitation AAL-0880-02 involves HVAC and electrical upgrades at the Fairbanks FSS facility in Alaska. The scope of work includes the replacement of the chiller, four AC units, and chilled-water piping, along with all associated electrical systems. Key technical requirements include the modification of HVAC circuits and Panel P1, as well as the provision of temporary and redundant cooling systems to maintain operations throughout the construction period. The project concludes with system startup, testing, commissioning, FAA training, and the completion of punch-list items. The project has an estimated construction magnitude between 250,000 and 500,000 dollars and is categorized under NAICS code 238220. It is designated as a set-aside for various small business categories, including Small Disadvantaged, Women-Owned, HUBZone, and Veteran-Owned small businesses. The proposed start date for the work is April 15, 2027. Primary coordination for this effort is managed by Masanori Akers of PTSI Managed Services Inc. on behalf of the FAA.

PTSI Managed Services Inc.

POSTED

about 7 hours ago

DEADLINE

Main Building 1 Wing 5 – Six Rooftop HVAC Unit Replacement – Glenmont Job Corps Center

Solicitation # S26-010

The Glenmont Job Corps Center is soliciting proposals from qualified, New York State licensed contractors for the replacement and installation of HVAC equipment within Main Building No. 1, Wing 5 (Education Building) in Glenmont, New York. The project involves replacing two 7.5-ton split-system units for the auditorium, one 6-ton rooftop unit for the library and computer lab, and one 12.5-ton rooftop unit for the north and east wing classrooms. Additionally, the scope includes installing four 2-ton ductless mini-split heat pump systems, removing a window air-conditioning unit, and abandoning two 5-ton rooftop units in place. Comprehensive associated work encompasses demolition, roof curbs and penetrations, ductwork, refrigerant and condensate piping, electrical work, controls, structural roof evaluations, and fire alarm and duct smoke detector installations, concluding with testing, balancing, and commissioning. This solicitation is set aside for various small business categories, including SDB, WOSB, HUBZone, and Veteran-Owned Small Businesses. The project must be completed within 210 calendar days following the written Notice to Proceed, and the facility will remain operational throughout the construction period. Key deadlines include a pre-proposal site walkthrough on September 10, 2026, with vendor questions due by September 14, 2026. Final proposals must be submitted by September 21, 2026, at 4:00 PM ET. All work must comply with applicable New York State codes, safety regulations, and environmental requirements.

Adams and Associates, Inc.

POSTED

about 7 hours ago

DEADLINE

Replace HVAC Systems in the following buildings on our campus –1.) 1091 – Glazing/Welding/Heavy Mechanics Bldg

Solicitation # 26-140

This project involves the replacement of a failing 10-ton pad-mounted gas-fired packaged HVAC unit at the Atterbury Job Corps Center in Edinburgh, Indiana, specifically within Building 1091. The contractor must install a new 12.5 SEER packaged unit utilizing non-R22 refrigerants, such as R-410A or R-454B, while reusing existing ductwork, electrical disconnects, and thermostat wiring. Key deliverables include providing a sequenced construction schedule within 10 days of the Notice to Proceed and ensuring the old unit and labeled recovered refrigerant are left at the maintenance building for parts. The project requires a one-year guarantee of workmanship and manufacturer product warranties. The solicitation is a single lump sum contract awarded based on best value, evaluating price, quality, past performance, and schedule. Mandatory requirements for bidders include attending the site visit on September 23, 2026, maintaining an active SAM.gov registration with a Unique Entity ID, and holding a valid Indiana Contractor's License. Proposals are due by October 5, 2026, and must include a detailed cost breakdown, insurance certificates, and certification of compliance with Davis-Bacon Act wage rates. All work must adhere to EPA, OSHA, and state and local building codes. Payment terms are Net 30, and the center is tax-exempt.

Adams & Associates, Inc.

POSTED

about 7 hours ago

DEADLINE

Inland Empire HVAC Tile & Landscape Trade

Solicitation # inland-empire-hvac-tile-landscape-trade

Inland Empire Job Corps

POSTED

about 7 hours ago

DEADLINE

Replace HVAC Systems in the following buildings on our campus –1.) ABL Dormitory

Solicitation # 26-141

Adams & Associates, Inc. is soliciting a single lump sum subcontract for the replacement of HVAC systems at the Atterbury Job Corps Center ABL Dormitory in Edinburgh, Indiana. The project requires replacing eight vertical up-flow gas-fired furnaces with DX-coils and matched air-cooled condensing units, specifically replacing R-22 Bryant units with new 12.5 SEER packaged units using non-R22 refrigerants such as R-410A or R-454B. The scope includes reusing existing electrical disconnects, ductwork, and thermostat wiring, while ensuring all recovered refrigerant is labeled and left on-site. All work must comply with EPA, OSHA, and Indiana state and local building codes. Eligible bidders must be registered in SAM.gov with a valid Unique Entity ID and hold a valid Indiana Contractor's License. A mandatory site visit is scheduled for September 23, 2026, with proposals due by October 5, 2026. Proposals must be submitted on company letterhead and include a detailed cost breakdown, a timeline for substantial completion, a 90-day bid guarantee, and certification of compliance with Davis Bacon Act wage rates. Award will be based on best value, evaluated across price (60 points), quality (20 points), past performance (10 points), and schedule (10 points). The contractor is responsible for all material storage and must provide proof of automobile liability and workers' compensation insurance, naming Adams and Associates, Inc. as an additional insured. Final payment is subject to Net 30 terms and requires the submission of a completed SF 1413, certified payroll records, and a release of liens from all subcontractors. Workmanship is guaranteed for one year from the date of substantial completion.

Adams & Associates, Inc.

POSTED

about 7 hours ago

DEADLINE

Replace HVAC Systems in the following buildings on our campus –1.) ABL Dormitory

Solicitation # 26-141

This subcontracting opportunity, managed by Adams and Associates, Inc. for the Atterbury Job Corps Center in Indiana, involves the replacement of aging R-22 HVAC systems in the ABL Dormitory. The scope of work requires replacing existing Bryant air-cooled condensing units and coils serving common areas and dormitory Wings A, B, C, and D with new 12.5 SEER packaged units utilizing non-R22 refrigerants, such as R-410A or R-454B. The contractor will reuse existing electrical disconnects, ductwork, and thermostat wiring, and must ensure all recovered refrigerant is labeled and left on-site. All work must comply with EPA and OSHA regulations, as well as state and local building codes, with Indiana regulations prevailing if more stringent. The project is a single lump sum contract, with award based on best value considering price (60 points), quality (20 points), past performance (10 points), and schedule (10 points). Mandatory requirements for bidders include attending a site visit on September 23, 2026, maintaining an active SAM.gov registration with a Unique Entity ID, and holding a valid Indiana Contractor's License. Proposals are due by October 5, 2026, and must include a detailed cost breakdown, a timeline for completion, and certification of compliance with Davis-Bacon Act wage rates. Final payment is subject to net 30 terms and is contingent upon the submission of a completed SF 1413, certified payroll records, and the release of all subcontractor and material supplier liens.

Adams & Associates, Inc.

POSTED

about 7 hours ago

DEADLINE

AAL-0810-01 Sitka (SIT) Flight Service Station (FSS) Fire Esc

Solicitation # AAL-0810-01

Solicitation AAL-0810-01 is a design-build construction project for the Sitka Flight Service Station in Sitka, Alaska. The scope of work involves the design and construction of an access stair platform serving the third floor of the facility. Key deliverables include the initial site survey, obtaining necessary permits, final design development, construction, inspections, punch-list completion, and the delivery of as-built drawings. The project has an estimated construction magnitude between 250,000 and 500,000 dollars and is proposed to start on February 1, 2027. This opportunity is designated as a presolicitation and is set aside for various small business categories, including Small Disadvantaged Businesses, Women-Owned Small Businesses, HUBZone Small Businesses, and Veteran-Owned Small Businesses. The project falls under NAICS code 238220 and is managed by PTSI Managed Services Inc.

PTSI Managed Services Inc.

POSTED

about 7 hours ago

DEADLINE

WOJC - Buried Domestic Hot Water (DHW) Pipe Repair

Solicitation # WOJC – Buried Domestic Hot Water (DHW) Pipe Repair

Education and Training Resources is seeking quotes for a subcontracting opportunity to repair a compromised buried domestic hot water pipe at the Westover Job Corps Center in Chicopee, Massachusetts. The scope of work involves excavating a trench approximately 15 linear feet long to a depth of 8 feet, removing and repairing up to 10 linear feet of piping with a diameter up to 4 inches, and installing insulation on the new piping. The selected contractor must provide all labor, materials, and equipment, ensuring all work adheres to industry standards, applicable construction codes, and OSHA regulations. A one-year equipment and workmanship warranty is required, and project close-out necessitates a signed punch list. Bids are due by October 2, 2026, at 4:00 PM, with a site walkthrough scheduled for September 23, 2026. To be eligible for award, bidders must submit a completed bid sheet with a detailed cost breakdown, a proposed service schedule, and proof of required Massachusetts licensing and credentials. Administrative requirements include an active SAM.gov registration with a Unique Entity ID, a W-9, a Vendor Acknowledgement Form, and applicable certificates of insurance. The contract mandates compliance with the Davis-Bacon Act and the Service Contract Act, requiring the submission of weekly certified payroll reports. Award selection is at the sole discretion of Education and Training Resources and is not automatically granted to the lowest bidder.

Westover Job Corps Center

POSTED

about 7 hours ago

DEADLINE

More opportunities from Department Of Homeland Security → Sflc Procurement Branch 2(00085)

Same awarding agency

HEALY-SLEP Industry Day - Deaerating Feed Tank (DFT), PLC-Based Steering Control System Replacement

Solicitation # HEALY-SLEP-Industry-Day

Ship Building and Repairing

POSTED

about 23 hours ago

DEADLINE

in about 1 year

Dockside (DS): USCGC MIDGETT FY27 Repair

Solicitation # 70Z08526QLREP0024

Solicitation 70Z08526QLREP0024 is a firm-fixed-price commercial services procurement for the Fiscal Year 2027 Quarter 2 dockside repairs of the USCGC MIDGETT (WMSL 757), located at 400 Sand Island Pkwy in Honolulu, Hawaii. This acquisition is 100% set aside for small businesses under NAICS code 336611. The primary period of performance for the first task order is from February 2, 2027, through May 8, 2027, with an overall ordering period extending to July 8, 2027. The scope of work includes 26 definite line items covering tank cleaning and preservation, refrigeration plant grooming, side boat davit renewal, and various system installations and modifications, as well as option items for post-award growth in labor and materials. The government will award the contract based on a best-value trade-off, prioritizing technical capability and past performance significantly over price. Offerors must submit separate emails for price, technical capability, and past performance, including a one-page cover letter, a graphical planning document such as a Gantt chart, and a signed SF1449. Following four amendments, the final solicitation closing date was extended to October 5, 2026, at 1400 Pacific Time. Key administrative requirements include the use of the Invoice Processing Platform for payments, adherence to strict marking and labeling standards for new equipment, and the submission of a Department of Homeland Security Non-Disclosure Agreement. Inspection and acceptance are managed by the Contracting Officer's Representative at the ship's homeport in Honolulu.

Ship Building and Repairing

POSTED

about 23 hours ago

DEADLINE

USCGC Healy Fire Alarm System troubleshooting

Solicitation # 70Z08526Q0028041

This contract requires a Siemens technical representative to perform a comprehensive inspection, troubleshooting, and repair of the FireFinder XLS Fire Alarm Control Panel and associated detectors onboard the USCGC Healy. The work will be conducted at USCG Base Seattle Terminal 46 within a period of performance of fourteen calendar days from the date of award, consisting of three working days. The primary scope includes clearing communication errors and malfunction alarms to return the system to a normal operating state, programming HFP-11 smoke detectors in the Magazine Compartment, and verifying the functionality of the master control panel and annunciators across the Engineering Control Center, Damage Control Central, and the Port and Starboard Quarterdecks. The contractor is responsible for providing all labor, materials, and equipment, adhering to Coast Guard Drawing 420-WAGB-801-001 and the ALARMCO, INC Operation and Maintenance Manual. Key deliverables include a detailed inspection report and a detector list containing network addresses and loop locations. While the base effort is covered under CLIN 0001, CLIN 002 provides a not-to-exceed ceiling of 2,500 dollars for potential repairs. Any work exceeding the base scope must be documented in a Condition Found Report and authorized by the Contracting Officer through a written contract modification.

Ship Building and Repairing

POSTED

DEADLINE

CGC POLAR STAR PUMP PARTS

Solicitation # POLARSTAR_PUMPPARTS_14501PR260000174

The United States Coast Guard is seeking a firm fixed-price contract for the procurement of critical spare parts for Buffalo Pumps ancillary seawater cooling pumps, specifically models AA6CCRE and 709CCRE, to support the USCGC Polar Star. These new, unused components, including impellers, gaskets, and seals, are essential for ship readiness following dry dock and prior to a winter deployment to Antarctica. All parts must meet manufacturer specifications and be compatible with the installed motors M22H0628RE and M22H0631RE. Offerors must provide supporting documentation, such as OEM part numbers or certifications, to verify compatibility. Deliveries must be completed by November 1, 2026, to USCG Base Seattle, Pier 46F, with the vendor assuming all delivery costs. Delivery personnel are required to have a Real ID for base access. This procurement is not a small business set-aside, and offerors must comply with the Buy American Act, identifying any non-domestic end products and providing the country of origin. Proposals are due by 1200 Pacific Time on October 10, 2026. The contract incorporates standard commercial item clauses under FAR 52.212 and requires active registration in the System for Award Management.

Plumbing, Heating, and Air-Conditioning Contractors

POSTED

DEADLINE

Open, Inspect, Repair Cylinder Assy.

Solicitation # 70Z08526P49025B00

The United States Coast Guard Surface Forces Logistics Center is soliciting quotes for a total small business set-aside contract to open, inspect, repair, and test three cylinder assemblies (NSN: 3040-01-422-6785, Part# CY5777, MFG: HIS CORP). This is a competitive Firm Fixed Price purchase order to be awarded on a best value trade-off basis. The contractor must provide all labor and materials to return the cylinders to a like-new condition using new OEM parts, adhering to specification R-580-2037. Key deliverables include a Condition Found Report with a detailed cost estimate submitted within ten days of receipt, digital photo documentation of the repair process, and final test reports. The required delivery date is November 14, 2026, with shipping required as FOB Destination to the Surface Forces Logistics Center in Baltimore, Maryland. Evaluation will be based on technical acceptability, including the ability to meet the delivery schedule, compliance with strict preservation, packaging, and marking requirements, and the provision of documentation demonstrating prior experience with similar repairs. Vendors must have an active SAM.gov registration and not be debarred or suspended from federal business. Technical standards require an inspection system conforming to ASQ Q90001-2008 and test equipment calibration traceable to NIST. Payments are NET 30 and must be processed through the IPP portal. All quotes must include shipping costs within the item pricing, as separate shipping line items may result in disqualification.

Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance

POSTED

DEADLINE

SEAL KIT, BOW THRUSTER

Solicitation # 70Z08526N40246B00

The United States Coast Guard Surface Forces Logistics Center is requesting quotes for ten bow thruster seal kits, part number A125XT13001, under solicitation 70Z08526N40246B00. The requirement is specifically for genuine OEM parts from Bird-Johnson Propeller Company, LLC (CAGE 07309). Consequently, only the OEM or its authorized distributors are eligible to bid, and any distributor must provide a verification letter from the OEM to be considered. No substitutions are permitted without approval from USCG SFLC technical experts. Each kit must contain a specific set of gaskets, split seals, shims, and O-rings, and must be packaged in ASTM D5118 fiberboard boxes with marking and labeling compliant with MIL-STD-129R and ISO/IEC-16388-2007. The procurement is managed by the SFLC Procurement Branch 2 in Alameda, California, with performance taking place in Curtis Bay, Maryland. Offerors must be registered in the System for Award Management (SAM) and provide a Unique Entity Identifier and CAGE code. The contract is governed by various Federal Acquisition Regulation clauses, including those for commercial items, fixed-price inspection of supplies, and labor standards. The government maintains the right to inspect and test all supplies during manufacture and prior to acceptance. The response deadline for this special notice is September 21, 2026.

All Other Miscellaneous General Purpose Machinery Manufacturing

POSTED

DEADLINE

Technical Representative Support for Hangar Door Installation

Engineering Services

POSTED

DEADLINE

Arctic-Grade Hangar Door, Track, and Operator Fabrication

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

DEADLINE

Drydocks (DD) – USCG WMSL-418 (NSC) FY28-33 Pacific Area

Solicitation # 70Z08526SSN_USCG_DD_FY28_FY33

The U.S. Coast Guard Surface Forces Logistics Center is conducting market research for the drydocking of six Pacific Area based Maritime Security Cutters, Large (WMSL) between Fiscal Year 2028 and 2033. The performance period is scheduled from March 15, 2028, to September 30, 2033, and includes six planned drydocks and one anticipated emergent drydock. These vessels are homeported in Alameda, California, and Honolulu, Hawaii. This sources-sought opportunity is managed by the Department of Homeland Security under NAICS code 336611. Interested parties must respond by September 24, 2026. There is currently no set-aside designated for this procurement.

Ship Building and Repairing

POSTED

DEADLINE

USCGC HEALY Replacement Hangar Doors

Solicitation # 70Z08526SSNHEALYDOORS

The United States Coast Guard issued Request for Information 70Z08526SSNHEALYDOORS to identify capable manufacturers for a pair of replacement hangar doors, tracks, and operators for the USCGC HEALY. The required system must completely fill a 17 foot by 18 foot opening, accommodate the transit of an H-60 helicopter with folding rotor and tail variants, and be capable of operating in Arctic conditions. Technical requirements include compliance with NAVAIR Certification and MIL-DTL-24151 Type 1 Class 1 standards, with specific exceptions noted for sections 3.4.2.5, 3.4.2.6, and 3.4.2.11. Interested respondents must provide details on their engineering and manufacturing capabilities, including a history of similar doors produced within the last five years, proposed materials for slats and tracks, operator specifications, and methods for sealing against light and water. While the supplier is not responsible for the actual installation, they must provide technical representatives capable of traveling within the Continental United States to offer installation assistance. Responses must be submitted in PDF format to the designated points of contact by September 30, 2026. This RFI is for market research and planning purposes under FAR Part 10 and does not constitute a formal request for proposal or a guarantee of future procurement.

Metal Window and Door Manufacturing

POSTED

DEADLINE

Supply of Rohde & Schwarz Power SuppliesThis 8(a) sole source subcontract, managed by the Department of Homeland Security's SFLC Procurement Branch 2, involves the supply of four genuine OEM power supplies for US Coast Guard Surface Forces Logistics Center projects. The contract specifically requires hardware identified by NSN 6130-12-393-4006 and Part Number 6120.2708.03. To be eligible, the provider must be the original equipment manufacturer, Rohde & Schwarz, or an authorized distributor, as no substitutions are permitted. The procurement falls under NAICS code 423430 and requires the sourcing, packaging, and delivery of the specified hardware.

Computer and Computer Peripheral Equipment and Software Merchant Wholesalers

POSTED

DEADLINE

Supply of Rohde & Schwarz Antenna Tuning UnitsThis 8(a) sole source subcontract through the Department of Homeland Security's SFLC Procurement Branch 2 involves the supply of three genuine OEM Antenna Tuning Units for US Coast Guard Surface Forces Logistics Center projects. The required hardware is specifically identified by NSN 5810-01-622-6901 and Part Number 6097.1005.02. To be eligible, the provider must be the original equipment manufacturer, Rohde & Schwarz, or an authorized distributor, as no substitutions are permitted. The procurement falls under NAICS code 423430, with a response deadline of September 20, 2026.

Computer and Computer Peripheral Equipment and Software Merchant Wholesalers

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS