Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

TUBE SHEET, FLUID COOLE

Active
SPE8E9-26-T-3339Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract pertains to the procurement of a tube sheet for a fluid cooler, identified by part numbers 8988B and 250393U1, with the NSN 4420-01-235-0677. The requirement is for a single unit to be delivered within 167 days after award, under purchase request 7017758637. Technical and quality standards referenced in this contract are governed by the DLA Master List of Technical and Quality Requirements, accessible online, with the applicable revision determined by the solicitation or award date, depending on the acquisition size. Packaging must comply with DLA packaging requirements, and all supplies must be marked in accordance with MIL-STD-130N for identification of U.S. military property. The contract strictly prohibits the intentional addition of mercury or mercury-containing compounds to any hardware or supplied items, except for designated exceptions such as batteries, fluorescent lights, instruments, sensors, controls, weapon systems, or specific chemical reagents approved by NAVSEA, with portable mercury-containing devices requiring shockproof design and secondary containment per NAVSEA 5100-003D. The solicitation number is SPE8E9-26-T-3339, issued August 5, 2026, with responses due August 17, 2026, under NAICS code 332410, and the performance location is in Bremerton, Washington. The primary point of contact is Matthew Kruc from the Department of Defense’s Construction & Equipment MRO Service I.

General Info

Procure one tube sheet for fluid cooler, deliver in 167 days, comply with DLA, MIL-STD-130N, and mercury restrictions.

Agency

Department Of Defense → CONSTRUCTION & EQUIPMENT MRO SVC IView Agency

NAICS

332410 - Power Boiler and Heat Exchanger ManufacturingView NAICS

Place of Performance

BLDG 467, BREMERTON, WA, 98314-6001, US

Set-Aside

NONE

Documents

(1)

RFQ SPE8E9-26-T-3339 for DLA Troop Support Construction & Equipment MRO

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → CONSTRUCTION & EQUIPMENT MRO SVC I
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → CONSTRUCTION & EQUIPMENT MRO SVC I
View Agency Profile
Office AddressUS
Contacts
Matthew Kruc
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
TUBE SHEET,FLUID COOLER,INDUSTRIAL
CORE ASSEMBLY, FLUID COOLER
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
CUSTIS WRIGHT (830Q4)
P/N: 8988B
or P/N: 250393U1 MIL-STD-130N, 16 Nov 2012 IDENTIFICATION MARKING OF U.S. MILITARY PROPERTY MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL NOT BE INTENTIONALLY ADDED TO<(>,<)> OR COME IN DIRECT CONTACT WITH<(>,<)> ANY HARDWARE OR SUPPLIES FURNISHED UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS; AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA. PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR MERCURY COMPOUND. (IAW NAVSEA 5100-003D). ADEQUATE DATA FOR NSN/Part Number: 4420-01-235-0677 Quantity: 1 AY Purchase Request: 7017758637QTY: 1 Delivery: 167 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 332410
New
DIBBS
COOLER, FLUID, INDUST
Solicitation # SPE8E8-26-T-5074
The contract is for the procurement of three industrial fluid coolers identified by NSN 4420-15-019-8664 under solicitation SPE8E8-26-T-5074, issued by the Department of Defense through the DDSP New Cumberland Facility. Delivery is required within 167 days after award, and responses must be submitted by August 17, 2026, with the solicitation posted on August 5, 2026. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers, with the applicable revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions unless amended. Packaging must comply with DLA standards, and any non-accepted supplies must have government identification removed prior to return. The primary point of contact is Alexis Selby, reachable via email and phone, with performance occurring at New Cumberland, Pennsylvania, 17070-5002.
DDSP NEW CUMBERLAND FACILITY

POSTED

about 3 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332410
New
DIBBS
COOLER, FLUID, INDUSTRIA
Solicitation # SPE8E8-26-T-4995
This contract specifies the procurement of one industrial fluid cooler with NSN 4420-01-374-7946 and part number 250400G1, sourced from Curtiss-Wright Electro-Mechanical Corp and Siemens Energy Inc, under solicitation SPE8E8-26-T-4995. The item is classified as a critical application component and must comply with strict packaging and handling standards including MIL-STD-2073-1E and MIL-STD-129, with no special marking required. Delivery is due in 167 days FOB origin with zero tolerance for quantity variance, inspection and acceptance occurring at destination. The contract prohibits intentional introduction of mercury or mercury-containing compounds into the product except for specific exempted applications such as batteries, fluorescent lights, and specified instrumentation, all of which must meet additional containment requirements per NAVSEA 5100-003D. Packaging must adhere to DLA packaging requirements, and the unit is to be shipped to the DLA Distribution facility in New Cumberland, PA. The contract is a small business set-aside under NAICS code 332410 with a response deadline of August 17, 2026, and a required ship date of February 1, 2027, ensuring alignment with defense logistics timelines.
DDSP NEW CUMBERLAND FACILITY

POSTED

about 3 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332410
New
DIBBS
CORE ASSEMBLY, FLUID
Solicitation # SPE8E8-26-T-4977
This contract pertains to the procurement of a CORE ASSEMBLY, FLUID, identified by NSN 4420013389731 and part numbers 411612090001 and 512612090001, with a quantity of two units. The items must comply with stringent technical and quality requirements referenced in the DLA Master List of Technical and Quality Requirements, and mercury or mercury-containing compounds are strictly prohibited from intentional use or direct contact with the hardware, except for specific exemptions such as functional mercury in batteries, fluorescent lamps, instruments, sensors, controls, weapon systems, or chemical reagents specified by NAVSEA. Portable fluorescent lamps and instruments containing mercury must be shockproof and include a secondary containment barrier per NAVSEA 5100-003D. Packaging must adhere to MIL-STD-2073-1E and MIL-STD-129, with no special marking required, and palletization must meet DLA’s packaging guidelines. The delivery is FOB origin with a 167-day delivery timeline, requiring shipment to the designated receipt warehouse in Tracy, California, and the original required delivery date is July 30, 2027, though the need ship date is February 1, 2027. The contract is issued under solicitation SPE8E8-26-T-4977, which is a total small business set-aside under NAICS code 332410, with unit pricing and total value structured per the CLIN format. Transportation instructions and freight shipping details are governed by DLA procedural notes C19 and C20, and all supplies must be delivered with government identification removed if not accepted.
DLA DIST SAN JOAQUIN

POSTED

about 3 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332410
New
DIBBS
CORE ASSEMBLY, FLUID
Solicitation # SPE8E8-26-T-5012
The contract pertains to the procurement of one unit of a Core Assembly, Fluid Cooler with NSN 4420-01-504-5631 under purchase request 7017757897, requiring delivery within 167 days after order. The solicitation number is SPE8E8-26-T-5012, issued on August 5, 2026, with a response deadline of August 17, 2026, and is designated as a Total Small Business Set-Aside under FAR 19.5, with NAICS code 332410 for Machine Shop, Turned Product, and Screw Machine Product Manufacturing. The contracting activity is managed by the Department of Defense through the San Diego office, with the place of performance located at 92136-3581. Compliance is mandated with DLA Packaging Requirements for Procurement and all referenced technical and quality requirements listed in the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date for large acquisitions or the award date for simplified acquisitions. Government identification must be removed from any non-accepted supplies as per RQ011. Primary point of contact for the solicitation is Alexis Selby, reachable via email and phone provided.
SAN DIEGO

POSTED

about 3 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332410
New
DIBBS
CORE ASSEMBLY, FLUID CO
Solicitation # SPE8E8-26-T-4988
The contract pertains to the procurement of a Core Assembly, Fluid Cooler with NSN 4420-01-327-8376, for a single unit under Purchase Request 7017757628. Delivery is required within 167 days after contract award, and the solicitation number is SPE8E8-26-T-4988 with a response deadline of August 17, 2026. The procurement is governed by DLA Packaging Requirements and incorporates technical and quality standards referenced in the DLA Master List of Technical and Quality Requirements, with the controlling revision determined by the solicitation issue or award date depending on acquisition size. Mercury and mercury-containing compounds are strictly prohibited from intentional addition or direct contact with the hardware except for specific, approved uses such as functional mercury in batteries, fluorescent lights, sensors, controls, weapon systems, and chemical reagents authorized by NAVSEA. Portable fluorescent lamps and instruments containing mercury must be shockproof and have a secondary containment boundary compliant with NAVSEA 5100-003D. The contractor is Xchanger Manufacturing Corp in Oakland, CA, and the contract falls under NAICS code 332410 with performance at the DLA New Cumberland Facility in Pennsylvania. Covered Defense Information may apply, and all data handling must comply with federal security protocols. The point of contact is Alexis Selby, reachable via email and phone provided.
DDSP NEW CUMBERLAND FACILITY

POSTED

about 3 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332410
New
DIBBS
PLATE, SPRAYER, OIL B
Solicitation # SPE8E8-26-T-4985
The contract specifies the procurement of 82 units of a plate spray atomizer for oil burners, identified by NSN 4530-01-256-3525 and purchase request 7017758606, with a unit price of $82.00 and a total contract value of $6,724. Delivery is required within 167 days from the contract date, with shipment FOB origin and inspection and acceptance occurring at the destination. Packaging must comply with MIL-STD-2073-1E, including specific preservation methods and materials, and marking must adhere to MIL-STD-129 with no special marking required. Palletization follows DLA packaging requirements, and the delivery address is the DLA Distribution facility in New Cumberland, Pennsylvania. The item must not contain mercury or mercury compounds unless explicitly permitted for functional components such as batteries, lighting, or sensors approved by NAVSEA, and any permitted mercury-containing devices must have dual containment and meet NAVSEA 5100-003D standards. The contract is governed by the DLA Master List of Technical and Quality Requirements, with applicable revisions controlled by the solicitation issue date. Transportation references and freight shipping instructions are tied to DLAD procedural notes, and the solicitation was issued under contract number SPE8E8-26-T-4985 with a response deadline of August 17, 2026, and a required ship date of February 1, 2027.
DDSP NEW CUMBERLAND FACILITY

POSTED

about 3 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332410
New
DIBBS
CORE ASSEMBLY, FLUID HE
Solicitation # SPE8E8-26-T-5033
The contract specifies the procurement of 15 units of a Core Assembly, Fluid Heater, Industrial, identified by NSN 4420-01-506-8627 and part number 2112-3011, supplied by POLARTHERM OY of Luvia, Finland, through NGH RETAIL LLC. The total contract value is $225.00 at $15.00 per unit, with a strict quantity variance of plus or minus 0%. Delivery is required FOB origin within 176 days, with an original delivery date of February 28, 2027, and a needed ship date of February 10, 2027. Inspection and acceptance occur at the destination, specifically at the DLA Distribution Depot Hill in Hill AFB, Utah, with packaging required to comply with ASTM D3951 and MIL-STD-129, under the precedence of DLA’s Master List of Technical and Quality Requirements. All packaging and palletization must conform to RP001 specifications, and the unit of issue is each. The contract incorporates applicable defense information requirements under RD003 and mandates strict labeling and traceability. Transportation details are governed by DLAD PROC NOTES C19 and C20, and the solicitation was issued under contract number SPE8E8-26-T-5033 with a response deadline of August 17, 2026, by the Department of Defense through the DLA.
DEPOT HILL

POSTED

about 3 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332410
New
DIBBS
COOLER, FLUID, INDUSTRIA
Solicitation # SPE8E8-26-T-4997
The contract pertains to the procurement of one industrial fluid cooler with NSN 4420-01-438-4834 and part number 5-126-17-144-002 Rev D, supplied by Fluid Handling LLC under solicitation SPE8E8-26-T-4997. Delivery is required within 167 days from the contract award, with FOB origin terms, and inspection and acceptance to occur at the destination. The item must comply with MIL-STD-2073-1E packaging standards and MIL-STD-129 marking requirements, with no special marking codes applied. Packaging must adhere to DLA’s procurement packaging requirements and include specific preservation methods using blanketing or drying techniques, with no cushioning or dunnage specified. Mercury and mercury-containing compounds are strictly prohibited from intentional addition or direct contact with the item, except for functional uses in batteries, fluorescent lights, instruments, sensors, controls, weapon systems, or NAVSEA-spec'd chemical reagents, with portable mercury-containing devices requiring shockproof design and secondary containment per NAVSEA 5100-003D. The solicitation is a total small business set-aside under NAICS code 332410, issued by the Department of Defense through the DDSP New Cumberland Facility, with delivery directed to a specified address in New Cumberland, Pennsylvania. Technical and quality requirements referenced through R and I numbers are governed by the DLA Master List, with the applicable revision determined by the solicitation or award date depending on acquisition size. Proprietary or insufficient data precludes competitive procurement, and documentation for source approval is required per RC001. The original required delivery date was August 1, 2027, with a need ship date of February 1, 2027.
DDSP NEW CUMBERLAND FACILITY

POSTED

about 3 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332410
New
DIBBS
PLATE, FLUID COOLER
Solicitation # SPE8E8-26-T-4994
The contract is for the procurement of 42 units of a Plate, Fluid Cooler with NSN 4420-01-370-8462 and part number 38-30 from RIX Industries, issued under solicitation SPE8E8-26-T-4994 as a Total Small Business Set-Aside. The item is designated as a critical application component and must comply with all DLA packaging and technical requirements referenced in the DLA Master List of Technical and Quality Requirements, including MIL-STD-2073-1E for packaging and MIL-STD-129 for marking, with no special marking codes required. Delivery is FOB origin, with a 167-day delivery timeline, and must be shipped to the DLA Distribution facility in New Cumberland, Pennsylvania by February 1, 2027, though the original required delivery date was January 14, 2027. The contract prohibits the intentional addition of mercury or mercury-containing compounds in direct contact with the item, except for functional uses in specific approved applications such as batteries, fluorescent lamps, or sensors, which must include a secondary containment barrier per NAVSEA 5100-003D. Inspection and acceptance occur at destination, with no quantity variance allowed. The unit of issue is each, priced at $42.00, for a total value of $1,764. All shipping, handling, and transportation are governed by DLA procedural notes C19 and C20, and the item is subject to covered defense information requirements.
DDSP NEW CUMBERLAND FACILITY

POSTED

about 3 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332410
New
DIBBS
BLADDER, ACCUMULATOR, HY
Solicitation # SPE8E8-26-T-4966
The contract pertains to the procurement of 31 hydraulic accumulator bladders designated by part number 733537-0002 and NSN 2090-00-588-2710, sourced under Solicitation SPE8E8-26-T-4966 with a response deadline of August 17, 2026. Delivery is required within 109 days after award, and the procurement is designated as a Total Small Business Set-Aside under FAR 19.5 with NAICS code 332410. The contract incorporates all applicable technical and quality requirements listed in the DLA Master List of Technical and Quality Requirements, with compliance governed by the version in effect on the solicitation issue date. Strict prohibitions are in place against the intentional addition of mercury or mercury-containing compounds to the hardware, except for specific exempted applications such as functional mercury in batteries, fluorescent lights, sensors, weapon systems, or authorized chemical reagents. Any portable fluorescent lamps or instruments containing mercury must be shockproof and include a secondary containment boundary in accordance with NAVSEA 5100-003D. The product is subject to DLA packaging requirements and the removal of government identification from non-accepted supplies. All data surrounding the part is deemed proprietary or insufficient for competitive procurement, and performances are to be carried out at the New Cumberland, Pennsylvania facility with primary point of contact Alexis Selby, reachable via email and phone provided.
DDSP NEW CUMBERLAND FACILITY

POSTED

about 3 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332410
New
DIBBS
COIL, BOILER AUXILI
Solicitation # SPE8E8-26-T-4962
The contract pertains to the procurement of a single unit of a COIL, BOILER AUXILIARY with NSN 4410004808052 and part number 45864016-01, supplied by VAPOR POWER INTERNATIONAL, LLC. Delivery is required within 167 days from the contract issuance, with FOB origin terms and inspection and acceptance occurring at the destination. The item must comply with strict packaging standards including MIL-STD-2073-1E and MIL-STD-129, and palletization must adhere to DLA Packaging Requirements RP001. The unit is to be packed using specified preservation methods, including dry preservation and controlled packaging materials, with no special marking required beyond standard compliance. The delivery address is DLA Distribution San Diego, and the need ship date is February 1, 2027, with the original required delivery date set for March 19, 2027. The contract enforces stringent technical and quality requirements referenced through R and I codes in the DLA Master List of Technical and Quality Requirements, applicable under the revision in effect on the solicitation issue date. Mercury and mercury-containing compounds are strictly prohibited from intentional addition or direct contact with the supplied hardware, with narrow exceptions for functional uses in batteries, lighting, instruments, sensors, weapon systems, and specific chemical reagents approved by NAVSEA; portable mercury-containing devices must incorporate shock-proof construction and a secondary containment barrier per NAVSEA 5100-003D. Additionally, the contract mandates compliance with DLA’s requirements regarding removal of government identification from non-accepted supplies and applicable covered defense information protocols. The solicitation number is SPE8E8-26-T-4962, posted on August 5, 2026, with a response deadline of August 17, 2026, under NAICS code 332410, and the primary point of contact is Alexis Selby at DLA.
SAN DIEGO

POSTED

about 3 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332410
New
DIBBS
COOLER, FLUID, INDUST
Solicitation # SPE8E8-26-T-5049
The contract is for the procurement of four fluid coolers for industrial use, identified by NSN 4420-15-179-6457 and purchase request 7017756897, under solicitation SPE8E8-26-T-5049. Delivery is required within 167 days of award, with a firm delivery date of February 1, 2027, and the items must be shipped FOB origin with no quantity variance permitted. Inspection and acceptance occur at the destination, and all packaging must comply with ASTM D3951, while also adhering to the stricter requirements of the DLA Master List of Technical and Quality Requirements, including MIL-STD-129 for marking and labeling. Palletization is governed by DLA’s packaging protocols, and the unit of issue is each. The deliver-to address is DLA Distribution Jacksonville at Bldg 175, Swan Road, Jacksonville, FL 32212-0103, with transportation details guided by DLAD Proc Notes C19 and C20. The contract incorporates all referenced technical and quality standards identified by R or I numbers from the DLA Master List, which take precedence over other specifications. The item is supplied by multiple vendors including FILTREX SRL, WENEX EQUIPEMENTS, and ISOTTA FRASCHINI MOTORI SPA, all providing the same part number 1R346706. The solicitation was issued on August 5, 2026, with a response deadline of August 17, 2026, and the NAICS code is 332410, indicating machinery manufacturing. The contract falls under Department of Defense procurement, managed by the Jacksonville office, with Alexis Selby listed as the primary point of contact. The unit price is $4.00 per unit, totaling a contract value of $16.00. The contract also notes that Covered Defense Information may apply, requiring compliance with relevant security protocols. The original required delivery date was December 8, 2026, but the current delivery window has been extended to meet the 167-day ADO timeline.
JACKSONVILLE BLDG

POSTED

about 3 hours ago

DEADLINE

in 12 days
View Details

More opportunities from Department Of Defense → CONSTRUCTION & EQUIPMENT MRO SVC I

Same awarding agency

NAICS: 332420
New
DIBBS
Small Business Subcontracting Participation
Metal Tank (Heavy Gauge) Manufacturing

POSTED

about 3 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 483110
New
DIBBS
Transportation of Supplies by Sea

POSTED

about 3 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 332420
New
DIBBS
Fire Extinguisher Supply (NSN 4210-00-203-0217)
Metal Tank (Heavy Gauge) Manufacturing

POSTED

about 3 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 339113
New
DIBBS
CARRIER ASSEMBLY
Solicitation # SPE8E9-26-Q-0643
The contract awards 202 units of the Carrier Assembly, Protective Mask, identified by NSN 4240-01-224-4196, under solicitation SPE8E9-26-Q-0643, with a firm fixed price and no variance allowed in quantity. Delivery is required within 60 days after contract award, with freight shipped from origin and acceptance occurring at destination. Packaging must comply strictly with MIL-STD-2073-1E and DLA Packaging Requirements, using specified methods for preservation, wrapping, and containment, while avoiding plastic materials whenever possible. Marking must adhere to MIL-STD-129 with no special coding required. Mercury and mercury-containing compounds are prohibited unless explicitly exempted for functional components like batteries or sensors, and any exempted items must meet NavSea 5100-003D standards for shock resistance and secondary containment. The item is destined for DLA Distribution at the New Cumberland facility, with transportation governed by DLAD procedural notes. The supply is critical to a Department of Defense requirement with a material need date of May 19, 2028, and technical and quality standards referenced from the DLA Master List of Requirements in effect on the solicitation issue date.
Surgical Appliance and Supplies Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 7 days
View Details
NAICS: 314994
New
DIBBS
MARLINE
Solicitation # SPE8E9-26-T-3289
This contract under the MARLINE designation issued by the Navy through DLA mandates the supply of 230 coils of material, each weighing 20 pounds, identified by NSN 4020-00-240-2185 and purchase request 7017757212, meeting Type 4, Class 1 specifications. The material must be packaged in snug-fitting weather-resistant fiberboard boxes compliant with ASTM D5118, and all packaging, marking, and shipping must adhere to MIL-STD-2073-1E and MIL-STD-129, with no special marking required. The contract explicitly prohibits the intentional addition of mercury or mercury-containing compounds to the supplied hardware, except in specific functional applications such as batteries, fluorescent lamps, sensors, weapon systems, and chemical reagents as authorized by NAVSEA, with portable mercury-containing devices requiring shock-proof design and secondary containment per NAVSEA 5100-003D. The jute material replaces hemp in packaging, and the minimum breaking strength is reduced to 140 lbs instead of 175 lbs, with ASTM-D681 permissible for tar content determination. Source inspection is required if the vendor has not supplied this item within the past three years, and inspection and acceptance occur at the destination point. Delivery is scheduled to occur within 525 days from the contract award, with delivery terms set at FOB Origin and no variation allowed in quantity. The shipment must be sent to the designated receiving warehouse in Tracy, California, with transportation governed by DLA procedural notes C19 and C20. The contract references the DLA Master List of Technical and Quality Requirements for all R and I-numbered specifications, with the applicable revision determined by the solicitation or award date depending on acquisition size. The material specification T-R-650 Revision A Gen 1 applies, with all packaging and handling instructions aligned to DLA’s procurement standards. The contract was solicited on August 5, 2026, with responses due by August 17, 2026, and performance is managed under NAICS code 314994 by the Department of Defense, with Matthew Kruc as the primary point of contact.
Rope, Cordage, Twine, Tire Cord, and Tire Fabric Mills

POSTED

about 3 hours ago

DEADLINE

in 12 days
View Details
NAICS: 334511
New
DIBBS
SLOT FILLER MODULE
Solicitation # SPE8E9-26-T-3350
The contract pertains to the procurement of 37 SLOT FILLER MODULES under NSN 7050-01-487-3044, with a delivery requirement of 21 days after award. The solicitation, identified as SPE8E9-26-T-3350, was posted on August 5, 2026, and responses are due by August 17, 2026. The acquisition falls under NAICS code 334511 and is managed by the Department of Defense’s Construction & Equipment MRO Service I office, with performance required at New Cumberland, PA, ZIP 17070-5002. The primary point of contact is Matthew Kruc, reachable via email and phone provided. All supplies must comply with DLA Packaging Requirements and the DLA Master List of Technical and Quality Requirements, which are incorporated by reference and whose applicable revision is determined by the solicitation or award date. Mercury or mercury-containing compounds are strictly prohibited from intentional addition or direct contact with the hardware, except for specific functional uses such as batteries, fluorescent lamps, sensors, weapon systems, or authorized chemical reagents, all of which must meet additional containment and safety standards per NAVSEA 5100-003D, including shock-proof design and a secondary containment boundary for portable devices.
Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332913
New
DIBBS
URINAL, STATIONARY
Solicitation # SPE8E9-26-T-3310
The contract is for 78 stationary urinals with part numbers 5672 and U5672, manufactured by Anchor Fabricators Inc. in Clayton, OH, and is identified by NSN 4510-00-691-3979. The items must be color white and comply with all applicable technical and quality requirements listed in the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers, which are incorporated by full text. Packaging must meet DLA packaging specifications, and any non-accepted supplies must have government identification removed before return. The solicitation number is SPE8E9-26-T-3310, issued under a Women-Owned Small Business Set-Aside, with a NAICS code of 332913. The request was made under purchase request 7017757728, and delivery is required within 187 days after order. The place of performance is Tinker Air Force Base, Oklahoma, with a response deadline of August 17, 2026, and the solicitation was posted on August 5, 2026. Primary point of contact is Matthew Kruc of the Department of Defense, Construction & Equipment MRO SVC I.
Plumbing Fixture Fitting and Trim Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333415
New
DIBBS
COMPRESSOR UNIT, REF
Solicitation # SPE8E9-26-T-3321
The contract is for the procurement of ten refrigerator compressor units identified by NSN 4130-01-090-9093 under solicitation SPE8E9-26-T-3321, issued as a total small business set-aside under NAICS code 333415. Delivery is required within 167 days of contract award, with a specific ship date of February 1, 2027, and an original required delivery date of October 30, 2027. Items must be shipped FOB origin with no variance allowed in quantity, inspected and accepted at the destination. Packaging must comply with MIL-STD-2073-1E and DLA packaging requirements, requiring each unit to be individually encased in a wooden box and secured with plywood planks to prevent movement, with marking per MIL-STD-129 and no special marking codes. The delivery destination is DLA Distribution Puget Sound in Bremerton, Washington. Strict prohibitions apply regarding mercury or mercury-containing compounds, which must not be intentionally added or come into direct contact with any supplied hardware except for specific exemptions such as functional mercury in batteries, fluorescent lights, sensors, weapon systems, or chemical reagents specified by NAVSEA. Portable fluorescent lamps and instruments containing mercury must be shockproof and equipped with a secondary containment barrier as mandated by NAVSEA 5100-003D. The contract incorporates all referenced technical and quality requirements from the DLA Master List, with compliance controlled by the revision in effect on the solicitation issue date. Transportation regulations are governed by DLAD Proc Notes C19 and C20, and the unit of issue is specified per DoD standards. The point of contact for inquiries is Matthew Kruc, with additional contract details accessible via the DIBBS system.
Air-Conditioning and Warm Air Heating Equipment and Commercial and Industrial Refrigeration Equipment Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333415
New
DIBBS
COOLING COIL, AIR, DU
Solicitation # SPE8E9-26-T-3360
The contract specifies the procurement of two cooling coils, air, du, identified by NSN 4130015338172 and part numbers 1262-01-D REV A and 6W8-34-5608T, under solicitation SPE8E9-26-T-3360. The quantity is fixed at two units with no variance allowed, and delivery is required within 167 days of the contract award, with FOB origin terms and inspection and acceptance occurring at the destination. Packaging must strictly comply with MIL-STD-2073-1E, including specific preservation, packaging, and container specifications, and marking must adhere to MIL-STD-129 with no special marking required. All packaging and handling requirements are governed by DLA’s official packaging standards, and the shipment must be sent to the designated receiving warehouse in Tracy, California. The item is subject to all technical and quality requirements listed in the DLA Master List of Technical and Quality Requirements, and defense information protections under RD003 may apply. The contract includes transportation guidelines referenced in DLAD Proc Notes C19 and C20, and the original required delivery date is May 18, 2027, with a need ship date of February 1, 2027. The NAICS code is 333415, and the responsible contracting office is under the Department of Defense’s Construction & Equipment MRO Service I, with primary point of contact Matthew Kruc.
Air-Conditioning and Warm Air Heating Equipment and Commercial and Industrial Refrigeration Equipment Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 12 days
View Details
NAICS: 339999
New
DIBBS
DRAFTING INSTRUMENT
Solicitation # SPE8E9-26-T-3303
This contract governs the procurement of drafting instruments under NSN 6675-00-641-3531, with a quantity of 64 units, pursuant to solicitation SPE8E9-26-T-3303. The technical and quality requirements are dictated by the DLA Master List of Technical and Quality Requirements, referenced by R-numbers such as RP001, RQ006, and RA001, with the applicable revision controlled by the solicitation issue date for simplified acquisitions or the RFP issue date for larger ones, unless a solicitation amendment supersedes it. The contract explicitly prohibits the intentional addition of mercury or mercury-containing compounds to any supplied hardware, with narrow exceptions for functional uses in batteries, fluorescent lights, instruments, sensors, controls, weapon systems, and specified chemical reagents. Portable devices containing mercury must meet shock-proof standards and include a secondary containment boundary as mandated by NAVSEA 5100-003D. The product specification deviates from CID A-A-52034 in specific ways: the center horn must be a transparent plastic disc with defined diameter and tolerance, paired with a centered rubber gasket having prescribed dimensions and protrusion, and revised nomenclature replaces obsolete classifications for protractors and triangles, now correctly identifying them as semicircular protractors and triangles with specified angles and dimensions. The contract item is procured as a fully competitive commercial item under federal specification, with delivery due 167 days after award, and is managed by the Department of Defense’s Construction & Equipment MRO Service I, with performance located in New Cumberland, Pennsylvania.
All Other Miscellaneous Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 12 days
View Details
NAICS: 331491
New
DIBBS
SHEET, METAL
Solicitation # SPE8E9-26-T-3307
This procurement requires aluminum alloy sheet metal with specific dimensions of 0.012 inches thick, 48 inches wide, and 144 inches long, weighing approximately 8.304 pounds per sheet, and must be supplied in whole-foot lengths only. All material must comply with exact specifications and严禁 test coupons; non-conforming sheets will be rejected. A Certificate of Quality Compliance, or Mill-Material Certification, is mandatory for every shipment and must be included with the delivery and submitted separately to the DLA Troop Support Contracting Officer. The material must meet the technical standards referenced in the Technical Data Package, including SAE AMS-QQ-A-250B, ASTM B666/B666M-20, and ASTM B660-23, and must be of Alloy 7075 in T6 temper. Continuous identification markings are required on each unit, including the DLA contract delivery order number, NSN, specification revision, alloy, part number, die number, temper, manufacturer’s name, heat and lot number, and dimensions. Markings must be legible, permanent, waterproof, and applied via stamping or stenciling without contaminating the product; adhesive labels are required for small bars, tubes, and shapes under 0.250 inches nominal OD. Only suppliers listed on the Qualified Suppliers List for Distributors (QSLD) are eligible for award under this solicitation, and any deviation from this requirement must be explicitly stated by the offeror. Suppliers on the QSLD are exempt from source inspection unless otherwise specified, and compliance with the QSL program is strictly enforced—failure to comply may result in criminal penalties. Packaging must adhere to MIL-STD-2073-1E and Level A requirements of ASTM B660, including robust four-corner protection, full edge coverage, and fiberboard or superior top and bottom protection. Marking must follow MIL-STD-129, with special codes ZZ indicating preservation in accordance with ASTM B660 and marking per ASTM B666. The delivery is FOB origin, with inspection and acceptance occurring at destination, and the entire order of 98 sheets must be delivered within 167 days to Warner Robins Air Force Base, Georgia. Failure to meet any requirement, including marking, packaging, or supplier qualification, will result in rejection of the product.
Nonferrous Metal (except Copper and Aluminum) Rolling, Drawing, and Extruding

POSTED

about 3 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332216
New
DIBBS
SOLDERING IRON, ELEC
Solicitation # SPE8E9-26-T-3314
The contract is for the procurement of 46 electric soldering irons with a part number of 3439-00-965-0090, specified as 200 watts with shape B tips, requiring two tips per unit. The item is not classified as hazardous and does not require a Safety Data Sheet, though the hazardous item indicator must remain unchanged. Strict prohibitions apply against the intentional addition of mercury or mercury-containing compounds in or in direct contact with the supplied hardware, with limited exceptions for functional uses in batteries, fluorescent lights, instruments, sensors, controls, weapon systems, and specific chemical reagents authorized by NAVSEA. Any portable devices containing mercury must be shock-proof and include a secondary containment barrier in compliance with NAVSEA 5100-003D. The contract incorporates technical and quality requirements referenced in the DLA Master List of Technical and Quality Requirements identified by R or I numbers, with the applicable revision determined by the solicitation or award date depending on acquisition size. Packaging, identification, and marking of non-accepted supplies must comply with DLA standards including removal of government identification and physical marking requirements. The solicitation number is SPE8E9-26-T-3314, issued on August 5, 2026, with responses due by August 17, 2026, under NAICS code 332216 for federal procurement administered by the Department of Defense’s Construction & Equipment MRO Service I. Deliveries are due within 167 days of award, and the place of performance is New Cumberland, PA, with Matthew Kruc listed as the primary point of contact.
Saw Blade and Handtool Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 12 days
View Details