Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, September 16 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Wiper Motor Replacement – Helicopter Control Station

Active

Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This contract involves the removal and replacement of the wiper motor assembly at the helicopter control station. The scope includes not only the physical replacement of the motor but also encompasses all necessary electrical and mechanical connections to ensure proper integration. Additionally, the contractor is responsible for conducting comprehensive functional testing to verify that the new installation operates correctly. The work is designated as a subcontract under the Department of Defense, specifically handled by the Mid Atlantic Regional Maintenance Center. The place of performance is located in Norfolk, zip code 23511. The contract falls under the NAICS code 238220, indicating specialized construction or maintenance services. The solicitation was posted on June 16, 2026, and though the contract does not specify a type of set-aside, it focuses on technical maintenance support within a critical military maintenance facility.

General Info

Remove and replace helicopter wiper motor with electrical integration and functional testing in Norfolk.

Agency

Department Of Defense → Mid Atlantic Reg Maintenance CtrView Agency

NAICS

238220 - Plumbing, Heating, and Air-Conditioning ContractorsView NAICS

Place of Performance

Norfolk, VA, 23511, USA

Set-Aside

NONE

Documents

This scope was carved out of N50054-26-100.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

SAN ANTONIO EMAV RCC 7N

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJun 16

subcontract

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → Mid Atlantic Reg Maintenance Ctr

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → Mid Atlantic Reg Maintenance Ctr

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Removal and replacement of the wiper motor assembly at the helo control station, including electrical and mechanical connections and functional testing.

Similar Contracts

Same NAICS industry code

ICE 8A - Ft Benning Improvements

Solicitation # 70CMSW25R00000011

Solicitation 70CMSW25R00000011 is a firm-fixed-price task order issued under an 8(a) Multiple Award Construction Contract (MACC) for design-build services to support the Immigration and Customs Enforcement (ICE) Office of Firearms and Tactical Programs at Fort Benning, Georgia. The project, valued between 4.0 million and 4.5 million dollars, focuses on life, safety, and operational improvements. The scope of work includes the installation of two aluminum awnings at the shipping and receiving dock and Fiske Range Lane 2, turf replacement at Fiske Range, the demolition of Building 2294, gutter and drainage improvements for Building 234, commercial HVAC services and replacements, and general facility improvements for Building 301 and the DAGr Team facility. The period of performance is 365 days from the date of award. Award will be based solely on the lowest total evaluated price, provided the offeror demonstrates a sound technical approach, appropriate design resources, and a comprehensive quality control and safety program. The contract is subject to the Davis-Bacon Act, requiring prevailing wage rates and specific paid sick leave for workers. Performance and payment bonds are required per FAR 52.228-15. Proposals must be submitted in two volumes: a technical and safety volume and a pricing volume using the provided template. All payment requests must be processed electronically via the Invoice Processing Platform and accompanied by certified payroll.

Bristol Alliance of Companies

POSTED

about 4 hours ago

DEADLINE

PIDC Project 3 - Dorm RTU Replacement and SCADA

Solicitation # 872287

This firm-fixed-price task order, issued under an 8(a) MACC IDIQ, involves the replacement and upgrade of Rooftop HVAC Units (RTUs) for the Alpha, Bravo, Charlie, and Delta dorms, as well as a SCADA system upgrade at the Port Isabel Detention Center in Los Fresnos, Texas. The project objective is to replace corroded and obsolete equipment with high-quality, coastal weather-resistant, and durable systems that exceed commercial standards. The scope includes removing existing RTUs, replacing necessary piping, electrical, and ducting, and installing new SCADA software and two chemical feed pumps in compliance with Texas Commission of Environmental Quality standards. The estimated magnitude of the project is between 1.2 million and 1.5 million dollars, with a period of performance of 365 days from the date of award. Award will be based solely on the lowest total evaluated price, provided the offeror demonstrates a sound technical approach, appropriate design resources, and a comprehensive quality control and safety program. Key requirements include the submission of a Quality Control Plan, a safety plan, and the designation of a Project Manager with at least five years of relevant federal contracting experience. The contractor must also provide a one-year warranty for installation and craftsmanship and ensure all personnel pass required background checks for site access. Compliance with the Davis-Bacon Act and associated executive orders regarding wages and sick leave is mandatory. All payment requests must be submitted electronically via the Invoice Processing Platform and accompanied by certified payroll.

Bristol Alliance of Companies

POSTED

about 4 hours ago

DEADLINE

Packaged HVAC Unit Replacement - Bldg 1091

Adams & Associates, Inc.

POSTED

about 4 hours ago

DEADLINE

RFQ7593 Smoke Detector Installation

Solicitation # RFQ7593

Management & Training Corporation (MTC) is soliciting bids for a fee-for-service subcontracting opportunity to provide smoke detector installation and fire system services at the Sierra Nevada Job Corps Center in Reno, Nevada. The scope of work requires the replacement of 43 smoke detectors across specific dormitory rooms, including 12 detectors in rooms 11, 15, and 18, 12 detectors in room 19, and 19 detectors in rooms 20 and 21. The contractor must ensure all installed detectors communicate with the fire panel and that all work adheres to NFPA standards and local Authority Having Jurisdiction requirements. Bids must be submitted via email to Tom Williams by 3:00 PM PST on September 18, 2026. To be considered, applicants must provide a completed bid sheet, proof of insurance, and a supplier packet containing a W-9, self-certification form, and acceptance of terms and conditions. This opportunity is open to various small business set-asides, including SDB, WOSB, HUBZone, and Veteran-Owned businesses, under NAICS code 238220. Award decisions will be based on the best value as determined by MTC. The contract mandates compliance with Service Contract Labor Standards and Wage Determination No. 2015-5595 Revision 28 for labor rates in Washoe and Storey counties. Additionally, subcontractors must provide a 12-digit Unique Entity ID and certify their debarment status under FAR 52.209-6 if the subcontract exceeds 30,000 dollars. Strict adherence to government and Department of Labor guidance regarding the protection of sensitive and proprietary information is required.

Sierra Nevada Job Corps Center

POSTED

about 4 hours ago

DEADLINE

2026-Clearfield-Bldg E8 Welding HVAC

Solicitation # 2026- Clearfield- Welding Bldg. E8 HVAC Replacement

Management & Training Corporation is seeking fixed-price lump sum bids for a subcontracting opportunity to replace the HVAC system at Building E8 Welding within the Clearfield Job Corps Center in Clearfield, Utah. The scope of work includes the complete change-out of the existing motor, installation of wiring, conduit, disconnects, breakers, fuses, and starters, and the subsequent validation of voltage, phase, and grounding. Deliverables include startup and testing documentation, onsite training for maintenance personnel, and the provision of manufacturer O&M manuals. All work must adhere to OSHA requirements, federal, state, and local codes, and site safety procedures. Bids must be submitted via email to nelson.dar@jobcorps.org and patricia.willover@mtctrains.com by September 19, 2026, at 3:00 PM MST. To be considered for award based on overall best value, offerors must complete a physical site visit, provide a detailed bid breakout on company letterhead, and submit a bid bond guarantee. The project is a small business set-aside under NAICS 238220 and requires compliance with Davis-Bacon prevailing wage determinations for Davis County. Awardees must provide a UEI number, submit a Schedule of Values for invoicing via AIA G702/G703 forms, and provide original payment and performance bonds from a surety with at least an A- rating within five business days of an Intent to Award letter. Performance dates will be established upon the signing of a Notice to Proceed.

Management & Training Corporation

POSTED

about 4 hours ago

DEADLINE

CBP7664 Wellness HVAC Compressor Replacement

Solicitation # CBP7664

Management & Training Corporation is seeking bids for a subcontracting opportunity to replace a failed HVAC/refrigeration compressor at the Wellness facility of the Sierra Nevada Job Corps Center in Reno, Nevada. This fixed-price, single lump sum contract requires the contractor to provide all labor, materials, and equipment to execute a five-phase process including preparation, demolition, installation of an OEM-specified compressor, system testing and commissioning, and final closeout. The project must restore full cooling capacity and operational efficiency while adhering to EPA Section 608 regulations for refrigerant recovery. The work must be completed within thirty consecutive business days following the receipt of a written Notice to Proceed. Bids will be evaluated based on overall best value, considering price, quality, and delivery schedule. The estimated price range is between 0 and 25,000 dollars, though bids equal to or greater than 25,000 dollars require a 20 percent bid bond guarantee and subsequent performance and payment bonds from an A-rated surety company. Submission requirements include a bid sheet, proof of insurance, three comparable project references, and a completed supplier packet containing a W-9 and self-certification of business size under FAR 52.219-8. Contractors must comply with Davis-Bacon Act prevailing wage rates for Washoe County and adhere to FAR 52.204-10 reporting if the award reaches 40,000 dollars. Final payment is contingent upon a successful final inspection and the submission of a notice of final completion, certified payroll reports, and operation and maintenance manuals.

Sierra Nevada Job Corps Center

POSTED

about 4 hours ago

DEADLINE

Replace Shower Diverters in two (2) Dorms

Solicitation # replace-shower-diverters-two-2-dorms

This project involves the removal and replacement of shower diverters in eight bathrooms across two dorm buildings in Indiana. The scope of work includes replacing existing Powers brand systems with Delta or comparable models featuring readily available parts, as well as repairing or replacing any piping in poor condition leading into the diverters. The solicitation is open to various small business set-asides, including SDB, WOSB, HUBZone, and SDVOSB. Proposals must be submitted via email to Tammy Swallows at Atterbury Job Corps by September 14, 2026, at 3:00 PM. A site visit was scheduled for September 1, 2026.

Adams & Associates

POSTED

about 4 hours ago

DEADLINE

This is a subcontracting opportunity to replace a chiller in McKinney, TX.

Solicitation # subcontracting-opportunity-replace-chiller-mckinney-tx

Serrato Corporation is seeking bids for a subcontracting opportunity to replace a failing air-cooled chiller at the North Texas Job Corps Center, specifically within Building 214/215 in McKinney, Texas. The scope of work includes the demolition and disposal of the existing chiller, the installation and startup of a new air-cooled chiller, and the integration of building automation controls using a JACE 9000 central integration point. Additionally, the contractor is responsible for installing three-way control valves at four air handling units, replacing VFDs, performing AHU cleaning and inspection, and ensuring all wiring is plenum-rated. Bids must be submitted by September 18, 2026, and quotes must remain valid for 90 days. Required submission documentation includes manufacturer equipment specifications, a Certificate of Liability Insurance naming Serrato Corporation as the holder, and Form 1413 for Davis-Bacon Act certified payroll compliance for work exceeding 2,000 dollars. Insurance requirements include a minimum of 500,000 dollars for Employers Liability and 1,000,000 dollars per occurrence for Commercial General Liability. The project is set aside for various small business categories, including SDB, WOSB, HUBZone, VOSB, and SDVOSB. Primary points of contact for this solicitation are Stacy Smith and Roy Henderson.

Serrato Corporation DBA North Texas Job Corps

POSTED

about 4 hours ago

DEADLINE

AAL-0880-02 HVAC and Electrical Upgrades Fairbanks

Solicitation # AAL-0880-02

Solicitation AAL-0880-02 is a presolicitation for HVAC and electrical upgrades at the Fairbanks FSS facility in Alaska, with an estimated construction magnitude between 250,000 and 500,000 dollars. The scope of work includes the replacement of the Fairbanks FSS chiller, four AC units, chilled-water piping, and all associated electrical systems. To maintain operations during construction, the contractor must provide temporary and redundant cooling and perform modifications to Panel P1 and various HVAC circuits. The project is scheduled for a proposed start date of April 15, 2027. Final deliverables include the completion of startup, testing, commissioning, and punch-list work, as well as providing FAA training and project closeout. This opportunity is set aside for small businesses, including SDB, WOSB, HUBZone, VOSB, SDVOSB, and Alaskan small businesses, under NAICS code 238220. Interested firms should contact Masanori Akers, the Parsons Subcontract Administrator, for further information.

PTSI Managed Services Inc.

POSTED

about 4 hours ago

DEADLINE

Main Building 1 Wing 5 – Six Rooftop HVAC Unit Replacement – Glenmont Job Corps Center

Solicitation # S26-010

The Glenmont Job Corps Center is soliciting proposals from qualified, New York State licensed contractors for the replacement and installation of HVAC equipment within Main Building No. 1, Wing 5 (Education Building) in Glenmont, New York. The project involves replacing two 7.5-ton split-system units for the auditorium, one 6-ton rooftop unit for the library and computer lab, and one 12.5-ton rooftop unit for the north and east wing classrooms. Additionally, the scope includes installing four 2-ton ductless mini-split heat pump systems, removing a window air-conditioning unit, and abandoning two 5-ton rooftop units in place. Comprehensive associated work encompasses demolition, roof curbs and penetrations, ductwork, refrigerant and condensate piping, electrical work, controls, structural roof evaluations, and fire alarm and duct smoke detector installations, concluding with testing, balancing, and commissioning. This solicitation is set aside for various small business categories, including SDB, WOSB, HUBZone, and Veteran-Owned Small Businesses. The project must be completed within 210 calendar days following the written Notice to Proceed, and the facility will remain operational throughout the construction period. Key deadlines include a pre-proposal site walkthrough on September 10, 2026, with vendor questions due by September 14, 2026. Final proposals must be submitted by September 21, 2026, at 4:00 PM ET. All work must comply with applicable New York State codes, safety regulations, and environmental requirements.

Adams and Associates, Inc.

POSTED

about 4 hours ago

DEADLINE

Replace HVAC Systems in the following buildings on our campus –1.) 1091 – Glazing/Welding/Heavy Mechanics Bldg

Solicitation # 26-140

This project involves the replacement of a pad-mounted gas-fired packaged HVAC unit at the Glazing, Welding, and Heavy Mechanics Building (1091) in Indiana. The existing 10-ton Carrier unit, which utilizes R-22 refrigerant, will be replaced with a new 12.5 SEER packaged unit using non-R22 refrigerants such as R-410A or R-454B. The scope of work requires the reuse of existing ductwork, electrical disconnects, and thermostat wiring. Following installation, the old unit and any recovered refrigerant must be labeled and left at the maintenance building for parts and reuse. The solicitation is managed by Adams and Associates, Inc., with a response deadline of October 5, 2026. This opportunity is set aside for various small business categories, including Small Disadvantaged, Women-Owned, HUBZone, and Veteran-Owned businesses. Interested parties should contact Tammy Swallows for further information regarding this NAICS 238220 project.

Adams & Associates, Inc.

POSTED

about 4 hours ago

DEADLINE

Replace HVAC Systems in the following buildings on our campus –1.) ABL Dormitory

Solicitation # 26-141

This subcontracting opportunity, managed by Adams & Associates, Inc. for the U.S. Department of Labor, involves the replacement of HVAC systems at the Atterbury Job Corps Center ABL Dormitory in Indiana. The project requires replacing existing R-22 Bryant condensing units and coils serving common areas and dormitory wings A, B, C, and D with new 12.5 SEER packaged units utilizing non-R22 refrigerants such as R-410A or R-454B. The contractor is expected to reuse existing electrical disconnects, ductwork, and thermostat wiring, and must label and leave all recovered refrigerant on-site. Bidders must attend a mandatory site visit on September 23, 2026, and submit a single lump sum proposal by October 5, 2026. Award will be based on best value, evaluating price (60 points), quality (20 points), past performance (10 points), and schedule (10 points). Eligible vendors must maintain an active SAM.gov registration and a Unique Entity ID, hold a valid Indiana Contractor's License, and provide proof of specific automobile and workers' compensation insurance. Compliance with EPA, OSHA, and Davis-Bacon Act wage determinations is mandatory. Final payment is subject to Net 30 terms and is contingent upon the submission of a completed SF 1413, certified payroll records, and the release of liens from all subcontractors and material suppliers.

Adams & Associates, Inc.

POSTED

about 4 hours ago

DEADLINE

More opportunities from Department Of Defense → Mid Atlantic Reg Maintenance Ctr

Same awarding agency

Supply of Kaba Ilco and Von Duprin Security Door Components

Other Commercial Equipment Merchant Wholesalers

POSTED

about 20 hours ago

DEADLINE

Security Door Parts

Solicitation # N5005426Q0181

The Mid-Atlantic Regional Maintenance Center (MARMC) is soliciting quotes under RFQ N5005426Q0181 for the procurement of new security door parts to support CEP-160 Security Upgrades. This is a 100% small business set-aside acquisition under NAICS code 332510, processed as a brand-name procurement to ensure compatibility with existing Kaba Ilco and Von Duprin hardware. The required supplies include SFIC rim cylinder housings, rim exit devices with night latch pulls, and quiet motorized latch retraction modular conversion kits. All parts must be new, as refurbished or used items are strictly prohibited. The contract is awarded based on a best value determination, evaluating technical capability, delivery capacity, and price. To be eligible for award, offerors must achieve an acceptable rating for all technical factors. Deliveries must be made FOB Destination to the MARMC warehouse in Norfolk, Virginia, with a required delivery date of October 30, 2026. Quotes must be submitted via email to the designated point of contact by 11:30 AM EST on September 18, 2026, and must remain valid for at least 60 calendar days. Submissions must include a detailed unpriced technical quote, a capabilities statement, and a separate price breakdown.

Hardware Manufacturing

POSTED

about 20 hours ago

DEADLINE

Mission-Critical Repair Integration & SchedulingThe Mission-Critical Repair Integration and Scheduling subcontract, issued by the Mid Atlantic Reg Maintenance Ctr under the Department of Defense, focuses on the coordination of temporary access work with Key Event Work Complete milestones. The primary objective is to ensure that these activities are aligned to prevent any interference or negative impact on urgent propulsion system repairs. This project is categorized under NAICS code 541611 and is designated for performance in Norfolk, Virginia. The contract emphasizes the critical nature of propulsion system maintenance and requires precise scheduling to maintain operational efficiency during high-priority repair cycles.

Administrative Management and General Management Consulting Services

POSTED

DEADLINE

Technical Certification & Compliance VerificationThe Technical Certification and Compliance Verification subcontract, issued by the Department of Defense through the Mid Atlantic Reg Maintenance Ctr, focuses on the execution and documentation of technical certifications necessary for government approval. The scope of work requires the performance of certifications that must be validated by a technical authority, legal counsel, and a contracting officer to ensure full regulatory compliance. This project is categorized under NAICS code 541330 and is scheduled for performance in Norfolk, Virginia. The contract was posted on August 17, 2026, and serves as a critical mechanism for securing the necessary official authorizations required for government operational standards.

Engineering Services

POSTED

DEADLINE

Shipboard Industrial Support & Coordination ServicesThe Shipboard Industrial Support and Coordination Services subcontract, issued by the Department of Defense through the Mid Atlantic Reg Maintenance Ctr, focuses on providing on-site industrial labor and technical coordination in Norfolk. The primary objective is to integrate temporary access work with ongoing propulsion repairs to ensure that critical maintenance schedules remain undisturbed. This project falls under NAICS code 811411 and was posted on August 17, 2026. The scope of work emphasizes the seamless coordination of technical services to maintain operational efficiency during complex shipboard repairs.

Home and Garden Equipment Repair and Maintenance

POSTED

DEADLINE

Temporary Access Point Fabrication & Installation (Machinery Room Entry)This subcontract involves the design, fabrication, installation, and eventual removal of a temporary metal access hatch in the Main Machinery Room of the USS FORT LAUDERDALE. The primary objective of this project is to provide necessary access for critical fuel header pipe repairs. The work is managed by the Mid Atlantic Reg Maintenance Ctr under the Department of Defense and will be performed in Norfolk, Virginia. The project falls under NAICS code 332322 and was posted on August 17, 2026.

Sheet Metal Work Manufacturing

POSTED

DEADLINE

Onboard Industrial Support Labor (Mechanical & HVAC Technicians)This subcontract involves the provision of skilled mechanical and HVAC technicians to perform specialized industrial support labor for the Department of Defense. The primary scope of work consists of hands-on cooling coil replacement and integration services conducted onboard the USS CARTER HALL. The project is managed by the Mid Atlantic Regional Maintenance Center and will be performed in Norfolk, Virginia. Classified under NAICS code 238220, the contract focuses on ensuring the operational integrity of the vessel's cooling systems through expert technical labor.

Plumbing, Heating, and Air-Conditioning Contractors

POSTED

about 1 month ago

DEADLINE

Technical Compliance and Quality Assurance InspectionThis subcontract, titled Technical Compliance and Quality Assurance Inspection, is issued by the Mid Atlantic Reg Maintenance Ctr under the Department of Defense. The primary objective of the agreement is to provide independent inspection and verification of cooling coil installations to ensure they meet strict naval specifications and maintain operational functionality for critical systems. The work is categorized under NAICS code 541330 and will be performed in Norfolk, Virginia. Posted on August 11, 2026, the contract focuses on quality assurance and technical compliance to guarantee the reliability of essential naval infrastructure.

Engineering Services

POSTED

about 1 month ago

DEADLINE

Cooling Coil Replacement – Shipboard HVAC SystemsThis subcontract, issued by the Mid Atlantic Reg Maintenance Ctr under the Department of Defense, involves the replacement of four cooling coils within the fan room of the USS CARTER HALL. The primary objective of the project is to restore essential cooling capabilities for the vessel's navigation systems and ensure crew habitability. The scope of work encompasses the full lifecycle of the replacement process, including the removal of existing components, installation of new coils, system integration, and final testing. The project is categorized under NAICS code 333415 and will be performed in Norfolk, Virginia. Posted on August 11, 2026, this effort is critical for maintaining the operational readiness of the ship's HVAC systems.

Air-Conditioning and Warm Air Heating Equipment and Commercial and Industrial Refrigeration Equipment Manufacturing

POSTED

about 1 month ago

DEADLINE

Supply of Naval-Grade Lubricants and Insulation MaterialsThe contract entails the supply of naval-grade lubricants, insulation materials, and sealing compounds specifically approved for use in shipboard motor overhaul operations aboard U.S. Navy vessels, with all products required to meet stringent military performance standards. These materials are critical for maintaining the operational readiness and longevity of marine motors, ensuring they function reliably under extreme conditions encountered at sea. The procurement is scoped to support maintenance activities centered at the Mid Atlantic Regional Maintenance Center in Norfolk, Virginia, with the place of performance clearly designated to this key naval hub. As a subcontract under the Department of Defense, this agreement falls under NAICS code 325992, indicating it involves other chemical product and preparation manufacturing, aligning with specialty industrial formulations tailored for defense applications. The contract was posted on July 1, 2026, and is part of a broader effort to secure high-certification materials that comply with strict military specifications, ensuring consistency and safety across the fleet. While no set-aside details or point of contact are provided, the emphasis on military-grade compliance underscores a prioritization of quality, durability, and regulatory adherence over cost or vendor size.

Photographic Film, Paper, Plate, Chemical, and Copy Toner Manufacturing

POSTED

DEADLINE

Supply of Replacement Motor Components for Naval Fan OverhaulThe contract involves the supply of certified replacement motor components, including motor windings, bearings, and rotors, specifically for the repair and overhaul of shipboard fan motors in accordance with naval specifications. These parts must meet strict military-grade standards to ensure reliability and performance under the demanding conditions of naval operations. The work is scoped as a subcontract and is intended to support maintenance activities at the Mid Atlantic Regional Maintenance Center, with performance taking place in Norfolk, Virginia, at the ZIP code 23523. The North American Industry Classification System code 335311 indicates the procurement falls under the manufacturing of electric motors, generators, and transformers, emphasizing the technical precision required in production. All components must be certified to conform to naval requirements, ensuring compatibility, durability, and safety on board vessels.

Power, Distribution, and Specialty Transformer Manufacturing

POSTED

DEADLINE

Vaneaxial Fan Motor Overhaul – SONAR Control Room (CSER No. 1)The contract pertains to the comprehensive overhaul of a vaneaxial fan motor located in the SONAR Control Room aboard the USS FORREST SHERMAN (DDG 98), requiring full disassembly, detailed inspection, and repair or replacement of worn or defective components as necessary. Work must adhere strictly to U.S. Navy standards, encompassing reassembly of the unit, performance of rigorous operational testing, and formal certification to ensure the system meets all functional and safety requirements for military vessel operations. The overhaul is critical to maintaining environmental controls within the SONAR control room, directly supporting mission-critical sensor functionality and crew safety. This subcontract is managed by the Mid Atlantic Regional Maintenance Center under the Department of Defense, with performance scheduled to occur at a facility in Norfolk, Virginia, 23523. The work falls under NAICS code 811310, indicating it involves industrial machinery and equipment repair and maintenance services. Although no solicitation number or set-aside designation is provided, the contract is positioned as a subcontract, suggesting it may be issued through a prime contractor within the naval support supply chain. The posting date indicates the opportunity was made available in mid-2026, aligning with planned maintenance cycles for the vessel.

Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 650+ contractors already using CLEATUS