1111 Aladdin Avenue Manufacturing Project

The 1111 Aladdin Avenue Manufacturing Project (PLN24-0036) in San Leandro, California, involves the complete demolition of a 44,758-square-foot office building at 1133 Aladdin Avenue and the interior demolition, remodel, and expansion of the manufacturing building at 1111 Aladdin Avenue. The project will increase the total building area to 142,645 square feet, featuring a standalone building addition of approximately 39,642 to 49,136 square feet separated by a 12-inch expansion gap. Additional scope includes enclosing a 7,925-square-foot canopy, remodeling office and mezzanine spaces, and installing six electric vehicle charging stations. The new expansion will reach a height of 35 feet, slightly exceeding the existing building's 33-foot height. Construction is scheduled to begin on June 1, 2026, with an estimated 18-month duration and an operational target year of 2028. The project timeline includes phases for demolition and site preparation through October 2026, grading through December 2026, and building construction extending to December 2027, followed by paving and architectural coating. All work must comply with the 2025 California Building Code and Title 24 energy efficiency standards. Environmental compliance is managed under CEQA, with a Mitigated Negative Declaration addressing air quality, greenhouse gas emissions, and hazardous materials, including a lead compliance plan per Cal/OSHA standards. Special requirements include the use of qualified archaeologists and tribal representatives if cultural resources are discovered during ground-disturbing activities.