Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →

This Government Contract opportunity from Department Of Defense was posted on May 20, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

On-Site Catering and Dietary Accommodation Services

Closed
Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 722310
New
WOJC – Cafeteria Food Service - December 1, 2026 to November 30, 2027
Solicitation # WOJC – Cafeteria Food Service
Education & Training Resources is seeking quotes for a fee-for-service subcontract to provide general line grocery merchant wholesale services for the Westover Job Corps Center in Chicopee, Massachusetts. The contract period runs from December 1, 2026, through November 30, 2027, and involves the delivery of fresh, frozen, and dry food products, ingredients, and supplies to support three daily meals for approximately 437 students and staff. Deliveries are required one to two times per week, typically from early morning to mid-morning, and must be quoted F.O.B. destination. The contractor is responsible for providing all labor, temperature-controlled vehicles, and equipment necessary to ensure 100 percent product quality and temperature compliance, a minimum 95 percent on-time delivery rate, and zero critical food safety violations. Interested bidders must submit a completed pricing bid sheet, a detailed cost breakdown, a proposed service schedule, and all required administrative documentation by November 6, 2026. Mandatory submissions include a current SAM.gov UEI number, active registration confirmation, business licenses, a W-9, a signed Vendor Acknowledgement form, and applicable certificates of insurance. The solicitation is open to various small business categories, including VOSB, SDVOSB, WOSB, and HUBZone. Award selection is at the sole discretion of ETR and is not based solely on the lowest bid. All operations must comply with the Job Corps Policy and Requirements Handbook, Dietary Guidelines for Americans, and relevant federal, state, and local food safety regulations.
Westover Job Corps Center

POSTED

about 5 hours ago

DEADLINE

in 9 days
NAICS: 722310
New
Federal
Fort Bragg, NC FFS
Solicitation # W5168W27RA021
The Department of Defense, through the Mission and Installation Contracting Command on behalf of the Army Sustainment Command, has issued a sources sought notice under solicitation number W5168W27RA021. This request for information is intended for market research and planning purposes to evaluate a potential requirement for high-volume installation food services and specialized cook support at Fort Bragg, North Carolina. The government is seeking technical and operational feedback regarding vendor capabilities, transition lead times, and the availability of qualified small businesses, including 8(a), SDVOSB, WOSB, and HUBZone firms, under NAICS code 722310. A critical component of this requirement is security compliance. The government is evaluating industry capacity to meet stringent physical access controls, including HSPD-12 Tier 1 background checks and Common Access Card issuance. Furthermore, personnel assigned to specific buildings must hold active SECRET security clearances prior to starting work, and the government is inquiring about firms possessing a Secret Facility Clearance sponsored by the DCSA. The scope also includes the deployment of qualified cook support for government-led tactical or remote site feeding operations on TDY assignments. This notice is not a formal solicitation, and the government is not currently accepting quotes or proposals.
W6QM Micc-Fdo Ft Sam Houston

POSTED

about 23 hours ago

DEADLINE

in 7 days
NAICS: 722310
New
Federal
Supply & Delivery of Packaged Food Products
Solicitation # 70CDCR27Q00000001
The Department of Homeland Security, U.S. Immigration and Customs Enforcement (ICE), is soliciting quotations under RFQ 70CDCR27Q00000001 for the supply and delivery of individually packaged meals to the ICE Atlanta Field Office, Detention Intake Processing Unit. This small business set-aside requires a vendor located within a 20-mile radius of the Atlanta metropolitan area to provide breakfast, lunch, and dinner three times daily, seven days per week, for up to 77 detainees. The contract is structured as a firm-fixed-price agreement consisting of a base year from November 19, 2026, to November 18, 2027, with three subsequent option years extending the performance period to November 18, 2030. The selected vendor must ensure all meals are delivered in sealed, tamper-proof packaging within two hours of an order and comply with USDA, FDA, and ICE National Detention Standards, including a daily average of 2,800 to 3,000 calories per detainee. Deliveries must include temperature logs to verify food safety and a signed receipt from the detention duty officer. The government will utilize the Lowest-Priced Technically Acceptable (LPTA) evaluation method, assessing vendors first on their technical capability to meet the Statement of Work and then on price. Quotations are due by November 5, 2026, and must be submitted in two separate volumes: a technical volume not exceeding five pages and a price volume using the provided template.
Detention Compliance And Removals

POSTED

about 23 hours ago

DEADLINE

in 8 days

AI Contract Overview

Show more

This contract requires the provision of on-site catering services for a minimum of 50 attendees during a bundled retreat package. The service must deliver buffet-style meals that fully accommodate a variety of dietary needs, including vegetarian, vegan, and allergy-sensitive options, ensuring inclusivity and satisfaction for all participants. The contract is designated as a Total Small Business Set-Aside under FAR 19.5, emphasizing opportunities for small businesses to compete. The contract is issued by the Department of the Air Force under the Department of Defense and is classified under NAICS code 722310, which pertains to food services. The place of performance is in Round Rock, Texas, zip code 78665. The solicitation was posted in late May 2026, with responses due by early June 2026. This subcontract highlights the importance of tailored dietary accommodations in large event catering within a federal government context.

General Info

Provide inclusive buffet catering for 50+ attendees at Round Rock retreat, small business set-aside.

NAICS

722310 - Food Service Contractors

Place of Performance

Round Rock, TX, 78665, USA

Set-Aside

SBA

Documents

This scope was carved out of FA301626Q0123.

The full solicitation package (2 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

688th Cyberspace Wing (688 CW) Chaplain Corps Family Retreat

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PhaseClosed
Posted

subcontract

Response Deadline

Deadline has passed

Submission Closed

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → Department Of The Air Force
ContactsNo contacts available
OfficeN/A
Office AddressN/A
ContactsNo contact information available

Full Description

Show more
Deliver buffet-style meals for 50+ attendees with full dietary accommodations including vegetarian, vegan, and allergy-sensitive options as part of a bundled retreat package.

More opportunities from Department Of Defense → Department Of The Air Force

Same awarding agency

NAICS: 541715
Federal
Notice of Intent to Sole Source - Post-delivery support of developed space and ground hardware and software
Solicitation # FA254826RB008
The Space Rapid Capabilities Office (Space RCO) intends to award a sole-source contract to Systems & Technology Research, LLC for post-delivery support of developed space and ground hardware and software. This effort focuses on providing systems engineering support for the verification, validation, and on-orbit troubleshooting of payloads, as well as transitioning a prototype ground system to full operational capability (FOC) within six months of the award to proceed. Key technical requirements include the development of a new graphical user interface, integration of mission-unique software, enhanced telemetry processing for 24/7 operations, and direct integration with the R2C2 Acme Ground Segment using cloud infrastructure and cybersecurity best practices. The contract is structured with multiple CLINs utilizing Cost Plus Fixed Fee (CPFF), Time and Materials (T&M), and Cost Only (No Fee) pricing models. The period of performance includes a mix of one and two-year base periods with multiple one-year option extensions. While the government intends to proceed with a sole-source award under 10 U.S.C. 3204(a)(1) due to the contractor's role as the original developer, other responsible sources may submit capability statements by November 4, 2026. To be considered viable, any alternative response must explicitly prove the ability to achieve FOC within six months and demonstrate integration with the R2C2 Acme Ground Segment without relying on proprietary data.
Research and Development in the Physical, Engineering, and Life Sciences (except Nanotechnology and Biotechnology)

POSTED

8 days ago

DEADLINE

in 7 days
View Details
NAICS: 541715
SBIR / STTR
Agile Wire Harness Manipulation and Installation for Unmanned Aerial Systems
Solicitation # DAF27BZ01-DV011
Solicitation DAF27BZ01-DV011 is a Department of the Air Force Direct-to-Phase-II SBIR effort seeking a modular, agile robotic manufacturing workcell to automate the routing and installation of flexible wire harnesses for Unmanned Aerial Systems and advanced munitions, such as the Coyote and Franklin Affordable Mass Missile families. The project aims to eliminate manual assembly bottlenecks by transitioning a TRL 4 proof-of-concept into a production-ready system capable of sub-millimeter positioning tolerances of 0.5 mm or less. Key technical requirements include the integration of a COTS collaborative arm with a multi-modal sensor stack for real-time adaptive control, the ability to retask the system for new harness families within eight hours, and the creation of a digital thread for traceability. Successful implementation is expected to increase throughput by two to four times and reduce skilled labor hours by at least 50 percent. This total small business set-aside has a maximum value of 2,000,000 dollars over a 24-month period of performance, with an additional 50,000 dollars available for Technical and Business Assistance. Proposals are evaluated based on technical merit, innovation, investigator qualifications, and commercial potential. Awardees must provide a fully functional robotic workcell, the complete autonomous software stack, a cross-program retasking report, and a comprehensive technical data package. Compliance requirements include adherence to CMMC cybersecurity standards, ITAR/EAR export controls, and military standard compliance. Proposals must be submitted via the DSIP portal and are subject to strict formatting and single-proposal limits per small business concern.
Research and Development in the Physical, Engineering, and Life Sciences (except Nanotechnology and Biotechnology)

POSTED

21 days ago

DEADLINE

in 28 days
View Details
NAICS: 541512
SBIR / STTR
Technical Data Package Modernization for Information Assurance and Secure Data Exchange
Solicitation # DAF27BZ01-DV008
Solicitation DAF27BZ01-DV008 is a Direct-to-Phase II SBIR effort issued by the United States Air Force to modernize Technical Data Packages (TDPs) for complex Air and Space Force platforms. The project addresses critical gaps in Information Assurance and secure data exchange, specifically targeting the need for robust configuration control and protection against cyber threats in Model-Based Definition and digital twin environments. The objective is to advance a solution from TRL 4 to at least TRL 6, resulting in a functional prototype that aligns with DoD Zero Trust Architecture and Trusted AI and Autonomy priorities. Key technical requirements include the development of a secure web-based MBD visualization tool, an encrypted configuration management system for as-sustained asset states, automated IA compliance validation tools, and an end-to-end encrypted data exchange framework incorporating AI/ML for damage detection and sustainment planning. This total small business set-aside has a maximum performance period of 24 months with a base value of 2,000,000 dollars, plus up to 50,000 dollars in Technical and Business Assistance (TABA) funding. Proposals are evaluated based on technical merit and innovation, qualifications of key personnel, and commercial potential. Awardees must comply with stringent security standards, including the Cybersecurity Maturity Model Certification (CMMC) for safeguarding Controlled Unclassified Information. Deliverables include the functional prototypes, comprehensive technical documentation, and a transition plan for operational integration. Proposals must be submitted via the DSIP portal as a single PDF and must include a detailed OCI mitigation plan and Phase I equivalency documentation to avoid disqualification.
Computer Systems Design Services

POSTED

21 days ago

DEADLINE

in 28 days
View Details
NAICS: 541715
SBIR / STTR
Optimally Packaged Assembly for Laser Systems (OPALS)
Solicitation # DAF27BZ01-NV002
The Optimally Packaged Assembly for Laser Systems (OPALS) solicitation, number DAF27BZ01-NV002, is a Phase I SBIR effort issued by the United States Air Force. The program seeks to develop a ruggedized, lightweight, and compactly packaged internal optical beam control system for airborne high energy laser applications. Rather than redesigning outer moldlines, the focus is on optimizing internal packaging to replace traditional flat optical benches with architectures that are tolerant of vibration, shock, and thermal gradients. Key technical priorities include the use of advanced materials free of shedding contaminants, athermalized design strategies, and the implementation of precision manufacturing techniques like additive manufacturing to ensure ease of alignment and the potential for line replaceable units. This is a small business set-aside solicitation with a maximum award value of 300,000 dollars, with an additional 6,500 dollars available for Technical and Business Assistance. Proposals are primarily awarded as firm-fixed-price contracts and are evaluated based on technical merit, the qualifications of key personnel, and commercial potential. Applicants must submit a seven-volume proposal via the DSIP portal, including detailed technical, cost, and foreign affiliation disclosures. Compliance requirements include registration in the System for Award Management, adherence to Buy American provisions, and the submission of a DD Form 2345 for export-controlled technical data.
Research and Development in the Physical, Engineering, and Life Sciences (except Nanotechnology and Biotechnology)

POSTED

21 days ago

DEADLINE

in 28 days
View Details
NAICS: 541715
SBIR / STTR
Agile Autonomous Technical Data Package to Path Robotic Task Specification
Solicitation # DAF27BZ01-DV012
The United States Air Force, under the Department of War SBIR program, is soliciting proposals for solicitation DAF27BZ01-DV012, titled Agile Autonomous Technical Data Package to Path Robotic Task Specification. This Direct to Phase II effort seeks the development of an automated end-to-end software platform that ingests heterogeneous Technical Data Packages, including 3D CAD models, 2D drawings, and Bills of Materials, to autonomously generate optimized, collision-free robotic inspection trajectories. The goal is to eliminate manual waypoint programming and hard-coded scripting, reducing quality control programming timelines from days to under two hours and achieving a Technology Readiness Level of 6/7. The resulting system must be capable of driving multi-vendor industrial manipulators and will be validated against representative aerospace assembly geometries. This total small business set-aside opportunity has a maximum value of 2,000,000 dollars over a 24-month period of performance, with an additional 50,000 dollars available for Technical and Business Assistance. Proposals are evaluated based on technical merit, qualifications of key personnel, and commercial potential. Applicants must be registered in the System for Award Management and comply with CMMC cybersecurity requirements and export control regulations. Key deliverables include the ingestion and planning software, enterprise data interface documentation, and quarterly status reports, culminating in a software-driven execution demonstration using high-fidelity simulations or physical hardware.
Research and Development in the Physical, Engineering, and Life Sciences (except Nanotechnology and Biotechnology)

POSTED

21 days ago

DEADLINE

in 28 days
View Details
NAICS: 541715
SBIR / STTR
High Speed, Low Temperature Hyperspectral Imager for High Enthalpy Ground Testing
Solicitation # DAF27BZ06-NV006
The United States Air Force is soliciting Phase I proposals under the Small Business Innovation Research program for the development of a high-speed, low-temperature hyperspectral imager. This technology is intended for use in high enthalpy ground testing to resolve temperature and emissivity across the surface of test articles. The solution must meet threshold requirements of measuring surface temperatures from 0 to 1500 degrees Fahrenheit at a sampling rate of 4000 Hz, with a maximum pixel footprint of 0.1 inch and an accuracy of +/- 10 degrees Fahrenheit. Objective goals include increasing the temperature range to 2000 degrees Fahrenheit, the sampling rate to 5000 Hz, reducing the pixel footprint to 0.05 inch, and improving accuracy to +/- 5 degrees Fahrenheit. This is a firm-fixed-price effort with a Phase I award maximum value of 300,000 dollars, plus up to 6,500 dollars for Technical and Business Assistance. Phase I requires research and a feasibility report for a benchtop proof-of-concept, while Phase II focuses on fabricating an operationally viable prototype. Proposals are evaluated based on technical merit and innovation, qualifications of key personnel, and commercial potential, with additional scrutiny regarding security risks and foreign affiliations. Submissions must be made through the DSIP portal by November 25, 2026, and must include seven specific volumes, including technical, cost, and commercialization reports.
Research and Development in the Physical, Engineering, and Life Sciences (except Nanotechnology and Biotechnology)

POSTED

21 days ago

DEADLINE

in 28 days
View Details
NAICS: 541715
SBIR / STTR
Fusion of Cooperative Information Sharing for Uncrewed Air Systems (FOCISAUS)
Solicitation # DAF27TZ01-DV003
The Fusion of Cooperative Information Sharing for Uncrewed Air Systems (FOCISAUS) solicitation, number DAF27TZ01-DV003, is a Phase II STTR effort issued by the United States Air Force. The program seeks prototype-ready solutions to enhance cooperative perception for uncrewed air systems, specifically focusing on the ability of distributed sensing nodes to share, prioritize, and fuse mission-relevant information in near real time. The goal is to reduce blind spots and improve object detection, tracking, and situational awareness within cluttered and bandwidth-constrained environments. Key technical requirements include adaptive data selection, compression, and a robust data fusion design capable of converting distributed observations into actionable products for autonomy software or operator interfaces, with a particular interest in systems that remain functional under degraded communications. This is a total small business set-aside with a maximum award value of 2,000,000 dollars, plus up to 50,000 dollars in additional funding for Technical and Business Assistance. Proposals are evaluated based on technical merit, innovation, investigator qualifications, and commercial potential. Eligible offerors must be U.S. small businesses with fewer than 500 employees and must be registered in the System for Award Management and the SBA Company Registry. Submissions must be made via the DSIP portal by November 25, 2026. Additionally, contractors are expected to meet a projected CMMC Level 2 cybersecurity requirement to safeguard federal contract information and controlled unclassified information.
Research and Development in the Physical, Engineering, and Life Sciences (except Nanotechnology and Biotechnology)

POSTED

21 days ago

DEADLINE

in 28 days
View Details

Earlier notices in this NAICS code

Posted before this notice, open and closed

Find Active Opportunities Like This

Get AI-powered intelligence on the opportunities still open

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS